Utilization of Basalt Saw Mud as a Spherical Porous Functional Aggregate for the Preparation of Ordinary Structure Concrete

To promote the production and application of artificial aggregates,save natural sand resources and protect the ecological environment,we evaluated the feasibility of using spherical porous functional aggregates(SPFAs) formed by basalt saw mud under autoclave curing in ordinary structural concrete.In our work,two types of prewetted functional aggregates were taken as replacements for natural aggregates with different volume substitution rates(0%,5%,10%,15%,20%,25%,and 30%) in the preparation of ordinary structural concrete with water-to-binder ratios(W/B) of 0.48 and 0.33.The effects of the functional aggregate properties and content,W/B,and curing age on the fluidity,density,mechanical properties and autogenous shrinkage of ordinary concrete were analyzed.The experimental results showed that the density of concrete declined at a rate of not more than 5%,and the 28 d compressive strength could reach 31.0-68.2 MPa.Low W/B,long curing age and high-quality functional aggregates were conducive to enhancing the mechanical properties of SPFAs concrete.Through the rolling effects,SPFAs can optimize the particle gradation of aggregate systems and improve the fluidity of concrete,and the water stored inside SPFAs provides an internal curing effect,which prolongs the cement hydration process and considerably reduces the autogenous shrinkage of concrete.SPFAs exhibits high strength and high density,as well as being more cost-effective and ecological,and is expected to be widely employed in ordinary structural concrete.

Solidification/Stabilization of Chromium in Red Mud-based Geopolymer

Up to 1.5wt%of Cr(Ⅲ)salts(CrCl_(3),and Cr_(2)O_(3))and Cr(Ⅵ)salts(Na_(2)CrO_(4),and CaCr_(2)O_(7))were incorporated into red mud-based geopolymers,respectively.The solidification/stabilization,compressive strength,and durability of the Cr-containing geopolymers were investigated.The experimental results indicate that the red mud-based geopolymer could effectively solidify/stabilize different types of Cr salts with solidification/stabilization rates of above 99.61%.Geopolymers are environmentally safe when the dosage of CaCr_(2)O_(7)is≤1.0wt%,or the dosage of CrCl_(3),Cr_(2)O_(3),and Na_(2)CrO_(4)is≤1.5wt%,respectively.The effects of Cr salts on the compressive strength varies with the type and content of Cr salts.The freeze-thaw cycle is more destructive to geopolymer properties than sulfate attack or acid rain erosion.The solidification/stabilization of Cr is mainly attributed to the following reasons:a)The chemical binding of Cr is related to the formation of Cr-containing hydrates(eg,magnesiochromite((Mg,Fe)(Cr,Al)_(2)O_(4)))and doping into N-A-S-H gel and C-A-S-H gel framework;b)The physical effect is related to the encapsulation by the hydration products(e g,N-A-S-H gel and C-A-S-H gel).This study provides a reference for the treatment of hazardous Cr-containing wastes by solid waste-based geopolymers.

Machine learning for carbonate formation drilling: Mud loss prediction using seismic attributes and mud loss records

Due to the complexity and variability of carbonate formation leakage zones, lost circulation prediction and control is one of the major challenges of carbonate drilling. It raises well-control risks and production expenses. This research utilizes the H oilfield as an example, employs seismic features to analyze mud loss prediction, and produces a complete set of pre-drilling mud loss prediction solutions. Firstly, 16seismic attributes are calculated based on the post-stack seismic data, and the mud loss rate per unit footage is specified. The sample set is constructed by extracting each attribute from the seismic trace surrounding 15 typical wells, with a ratio of 8:2 between the training set and the test set. With the calibration results for mud loss rate per unit footage, the nonlinear mapping relationship between seismic attributes and mud loss rate per unit size is established using the mixed density network model.Then, the influence of the number of sub-Gausses and the uncertainty coefficient on the model's prediction is evaluated. Finally, the model is used in conjunction with downhole drilling conditions to assess the risk of mud loss in various layers and along the wellbore trajectory. The study demonstrates that the mean relative errors of the model for training data and test data are 6.9% and 7.5%, respectively, and that R2is 90% and 88%, respectively, for training data and test data. The accuracy and efficacy of mud loss prediction may be greatly enhanced by combining 16 seismic attributes with the mud loss rate per unit footage and applying machine learning methods. The mud loss prediction model based on the MDN model can not only predict the mud loss rate but also objectively evaluate the prediction based on the quality of the data and the model.

Synergistic CO_(2) mineralization using coal fly ash and red mud as a composite system

CO_(2) mineralization plays a critical role in the storage and utilization of CO_(2).Coal fly ash(CFA)and red mud(RM)are widely utilized as CO_(2) mineralizers.However,the inert calcium species in CFA limit its carbonation capacity,meanwhile the substantial Ca^(2+)releasing of RM is hindered by a covering layer of calcium carbonate.In this study,CO_(2) mineralization in a composite system of CFA and RM was investigated to enhance the carbonation capacity.Multiple analyzers were employed to characterize the raw materials and resulting mineralization products.The results demonstrated that a synergistic effect existed in the composite system of CFA and RM,resulting in improving CO_(2) mineralization rate and efficiency.The produced calcium carbonate was ectopically attached the surface of CFA in the composite system,thus slowing down its coverage on the surface of RM.This phenomenon facilitated further releasing Ca^(2+)from the internal RM,thereby enhancing CO_(2) mineralization efficiency.Meanwhile,the inclusion of RM significantly improved the alkalinity of the composite system,which not only promoted the dissolution of Ca^(2+)of the inert CaSO_(4)(H_(2)O)_(2) in CFA,but also accelerated CO_(2) mineralization rate.The investigation would be beneficial to CO_(2) mineralization using industrial solid wastes.

Analysis of Calcined Red Mud Properties and Related Mortar Performances

Red mud(RM)is a low-activity industrial solid waste,and its utilization as a resource is currently a hot topic.In this study,the micro characteristics of red mud at different calcination temperatures were analyzed using X-ray diffraction and scanning electron microscopy.The performance of calcined red mud was determined through mortar strength tests.Results indicate that high-temperature calcination can change the mineral composition and microstructure of red mud,and increase the surface roughness and specific surface area.At the optimal temperature of 700°C,the addition of calcined red mud still leads to a decrease in mortar strength,but its activity index and flexural coefficient increase by 16.2%and 11.9%with respect to uncalcined red mud,reaching values of 0.826 and 0.974,respectively.Compared with the control group,the synergistic activation of calcined red mud with slag can increase the compressive and flexural strength of the mortar by 12.9%and 1.5%,reaching 8.7 and 62.4 MPa,respectively.Correspondingly,the activity index and flexural coefficient of the calcined RM and GGBS(Ground Granulated Blast furnace Slag)mixtures also increase to 1.015 and 1.130,respectively.

Response and assembly of abundant and rare taxa in Zaopei under different combination patterns of Daqu and pit mud:from microbial ecology to Baijiu brewing microecosystem

The quality and aroma of strong-flavor Baijiu are mainly dependent on Daqu,pit mud(PM),and the interaction of both.However,little is known about how their combination patterns affect the microbiome and metabolome of Zaopei,especially the metabolic function of rare taxa.Here,an experiment on industrial size was designed to assess the effects of 6 combinations(3 kinds of Daqu×2 kinds of PM)on the composition and assembly of different taxa,as well as the flavor profile.The results showed that Zaopei's microbiota was composed of a few abundant taxa and enormous rare taxa,and rare bacterial and abundant fungal subcommunities were significantly affected by combination patterns.The assembly processes of abundant/rare taxa and bacterial/fungal communities were distinct,and environmental changes mediated the balance between stochastic and deterministic processes in rare bacteria assembly.Furthermore,specific combination patterns improved the flavor quality of Zaopei by enhancing the interspecies interaction,which was closely related to rare taxa,especially rare bacteria.These findings highlighted that rare bacteria might be the keystone in involving community interaction and maintaining metabolic function,which provided a scientific foundation for better understanding and regulating the brewing microbiota from the viewpoint of microbial ecology.

Formulating Dead Sea Mud in Cosmetic Products, Its Effects on Skin, and the Underlying Biological Mechanism: A Review

Research Background: The marketing of cosmetic products derived from Dead Sea (DS) mud has undergone significant evolution, transforming from simple souvenirs into a large-scale cosmetic industry offering a diverse array of products. DS mud is utilized both as pure mud for home spa treatments and as an active ingredient in cosmetic and cosmeceutical formulations. Its global appeal is largely due to its natural, health-oriented image, which aligns with consumer preferences and provides assurance regarding its use in skincare. Research Objectives: This review examines the published data related to the rationale for formulating DS mud in cosmetics, the biological and cosmetic effects of DS mud on the skin, and the speculated bio-mechanisms underlying these effects. Methods: We screened relevant literature on DS mud collected from the shores of the Dead Sea in Jordan and Israel. Publications on mineral muds excavated in different locations around the globe, as well as studies on the biological mechanisms of other DS minerals, were also reviewed as indications and supportive recommendations. Summarizing the vast collected data into a comprehensive review was undertaken to expose readers to the various aspects of DS mud in cosmetics. Results: The primary reason for formulating DS mud in skincare products is its deep cleansing and skin detoxification properties. Consequently, it is often incorporated into rinse-off masks, soaps, and scrubbing products. Additionally, DS mud is used in leave-on products and sheet masks. Cosmeceutical applications of DS mud, recommended for various skin conditions, offer complementary treatments to improve the quality of life for people with skin diseases. The physicochemical and biological effects of DS mud are driven by its rich mineral ion composition, including magnesium, calcium, sodium, potassium, zinc, and strontium—elements known to improve skin barrier function, enhance hydration, and reduce inflammation. The high salt concentration induces moderate ionic osmotic stress, stimulating cellular growth and hydration pathways. Moreover, DS mud’s anti-microbial properties further contribute to its therapeutic potential. Ongoing innovations in formulation techniques continue to expand the applications of DS mud, including blending it with other active ingredients, developing novel application methods, and refining manufacturing processes to improve product quality and efficacy. Conclusions: DS mud remains a valuable ingredient in modern skincare due to its rich mineral content and therapeutic properties. Ongoing research and technological advancements promise further innovations, reinforcing its status as a natural and effective component in the global cosmetics industry.

Real-Time Fracture Aperture Identification Using Mud Loss Data and Solution for LCM Combination

Managing server lost circulation is a major challenge of drilling operation in naturally fractured formations and it causes much nonproductive rig time. When encountered with loss, the fracture aperture intersecting the wellbore is not well-identified in time, which has a significant impact on the decision of drilling operation and the undesired result of loss curing. Therefore, the onset of fracture is identified in a timely manner and evaluated comprehensively to formulate an appropriate strategy over time. However, the mud loss date, which is the primary source of information retrieved from the drilling process, was not properly used in real-time prediction of fracture aperture. This article provides a detailed mathematical study to discuss the mechanism of mud invasion in the near-wellbore region and prediction of fracture aperture. The fracture aperture can be calculated from mud-loss data by solving a cubic equation with input parameters given by the well radius, the overpressure ratio, and the maximum mud-loss volume. It permits the proper selection of loss-circulation material (LCM) with respect to particle size distribution and fiber usage. The case study illustrates the applicability of this methodology with a discussion on LCM particle distribution in different scenarios and the result demonstrates the outcome of inappropriate LCM usage and the advantages of the novel fiber-based LCM treatment.

Influence of Bayer Red Mud on the Operational and Mechanical Characteristics of Composite Cement Mortar

The aim of this study is to enhance the value and utilization of red mud generated in the Bayer process by preparing composite cement mortars.The effects of two different types of Bayer red mud with varying physical and chemical characteristics on the fluidity,mechanical strength,mineral composition,and microstructure of the composite cement mortar were systematically evaluated.The results showed that the optimal addition of red mud A was 10 wt%,while it was 20 wt% for red mud B.The mechanical properties of the composite cement mortar met the standards for P·O42.5 cement.Furthermore,the composite mortar with the addition of red mud B showed higher flexural and compressive strengths compared to the composite mortar with red mud A.This improvement is attributed to the smaller particle size of red mud B,which filled the micro-pores and increased the compactness of the cement stone,as well as its higher content of Na_(2)O,K_(2)O,and other free alkalis,which resulted in more obvious alkali activation,accelerating the hydration of the active minerals in the slurry.

A Seismic Facies Analysis to Determine the Relative Age and History of the Al Idrissi Mud Volcano from Offshore Larache Located in the NW Moroccan Atlantic Margin

Formed on top of the Gulf of Cadiz, the Al Idrissi mud volcano is the shallowest and largest mud volcano in the El Arraiche mud volcano field of the northwestern Moroccan margin. The development and morphology of mud volcanoes from the El Arraiche mud volcanoes group have been studied at a large scale. However, the time interval related to their formation period still needs to be better understood. In this regard, we interpreted and analyzed the seismic facies from the 2D reflection data of the GEOMARGEN-1 campaign, which took place in 2011. The aim was to identify the seismic sequences and draw the Al Idrissi mud volcano system to determine the formation period of the Al Idriss mud volcano. And as a result, the Al Idrissi mud volcano system is made of both buried and superficial bicone and was identified along with the Upper Tortonian to Messinian-Upper Pliocene facies. As the initial mud volcano extrusive edifice, the buried bicone was formed in the Late-Messinian to Early-Pliocene period. However, the superficial bicone, as the final extrusive edifice, was included in the Late Pliocene. In this case, the timing interval between the buried and superficial bicone is equivalent to the Late-Messinian to Upper-Pliocene period. Therefore, the latter corresponds to the Al Idrissi mud volcano formation period.

Research Progress on Green Utilization of Red Mud

Based on the research at home and abroad in recent years,this paper summarizes the recycling of metals in red mud,the preparation of cement and concrete with red mud,and the preparation of cementitious materials with red mud,so as to achieve the purpose of efficient utilization of waste and turning waste into wealth,make positive contribution to environmental protection,and ensure the green and sustainable development of various industries.

Model and method of permeability evaluation based on mud invasion effects

The evaluation of permeability in reservoir assessment is a complex problem. Thus, it is difficult to perform direct evaluation permeability with conventional well-logging methods. Considering that reservoir permeability significantly affects mud invasion during drilling, we derive a mathematical model to assess the reservoir permeability based on mud invasion. A numerical model is first used to simulate the process of mud invasion and mud cake growth. Then, based on Darcy＇s law, an approximation is derived to associate the depth of mud invasion with reservoir permeability. A mathematical model is constructed to evaluate the reservoir permeability as a function of the mud invasion depth in time-lapse logging. Sensitivity analyses of the reservoir porosity, permeability, and water saturation are performed, and the results suggest that the proposed model and method are well suited for oil layers or oil-water layers of low porosity and low permeability. Numerical simulations using field logging and coring data suggest that the evaluated and assumed permeability data agree, validating the proposed model and method.

Feasible Rate of Tidal Flat Reclamation——Jiangsu Mud Coast as a Case Study

Reclamation of tidal flat is one of the main ways to get a dynamic balance of the total amount of plowland. With the development of social economy and the increasing demand for plowland, the contradiction between tidal flat reclamation and environment protection becomes more and more outstanding. However, tidal flat reclamation should also follow the dynamic balance of total amount of tidal flat amount. The paper analyzed the history of reclamation and development of Jiangsu mud coast, and calculated the feasible rates of tidal flat reclamation on different stretches respectively, and pointed out that both the economic social benefits of reclamation and the natural erosion-accretion conditions of the coasts should be taken into consideration in deciding the intensity of tidal flat reclamation, so as to satisfy demands on both reclamation and protection of tidal flat resource.

MUDS在“村村通”中的应用方案探讨

介绍MUDS在农村有线电视发展过程中所起的作用,重点阐明MUDS系统的特点及其5大组成部分:数字电视中心、上行站、数字MUDS发射基站、数字MUDS直放站、用户接收系统。

Removal of cadmium from aqueous solutions using red mud granulated with cement

A novel adsorbent was prepared from granular red mud mixed with cement and its potential to be a suitable adsorbent for the removal of cadmium ions from aqueous solutions was evaluated. The wet red mud was directly mixed up with cement at different mass fractions of 2%-8% and their properties were investigated. Based on the textural characteristics and strength, the granular red mud with 2% addition of cement maintaining for 6 d is identified to have better properties. The batch adsorption experiments for adsorption of Cd2+ ions from solution were performed at 30, 40 and 50 °C at different initial concentrations under the condition of constant pH of 6.5. The equilibrium adsorption was found to increase with the increase of temperature during the adsorption process. Langmuir adsorption isotherm model was found to match the experimental adsorption isotherm better. The kinetics of adsorption was modeled using a pseudo second order kinetic model and the model parameters were estimated.

Kinetics of titanium leaching with citric acid in sulfuric acid from red mud

The recovery of titanium with citric acid in sulfuric acid from red mud was put forward to strengthen acid leaching efficiency.The main factors on the recovery of titanium such as citric acid addition,sulfuric acid concentration,leaching temperature,time and liquid-to-solid ratio were studied.The kinetics analysis of titanium leaching from red mud was deeply investigated.The results show that the citric acid could increase the recovery of titanium and decrease the consumption of sulfuric acid.The recovery of titanium was increased from 65% to 82% and the consumption of sulfuric acid was decreased by about 30% with using 5% citric acid.The dissolution of perovskite,brookite,and hematite in red mud could easily be dissolved using citric acid.The acid leaching process was controlled by internal diffusion of shrinking core model（SCM） and the correlation coefficient was above 0.98.The apparent rate constant was increased from 0.0012 to 0.0019 with 5% citric acid at 90 °C.The apparent activation energy of titanium leaching decreased from 39.77 k J/mol to 34.61 k J/mol with 5% citric acid.

Dynamic Monitoring of the Mud

[Objective] The research aimed to provide basic files and theoretical guidance for constructing sluicing-siltation dam using soil with high clay content soil.[Method] The soils of Dagou basin near Xiwu Village of Baishui County,Shaanxi Province were taken as experimental materials.pvc pipes with same height and diameter were used to construct testing model for dynamically determining settlement,shear strength,wet density of grouting bulk under 2 different grouting speeds(15 cm/d and 25 cm/d).[Result] Under different grouting speeds,general change trend was similar during grouting course.The subsidence,deformation,shear strength and wet density increased with the increase of grouting speed.Five or six days after grouting,daily displacement under 25 cm/d grouting speed was fewer than that under 15 cm/d grouting speed.[Conclusion] The increase of grouting speed could shorten the time for reaching the same subsidence,deformation,shear strength and wet density and increased displacement at the initial stage of grouting,however,with the increase of grouting time,lower grouting bulk was bad for displacement at later grouting period because it was near impermeable layer.

Isolation of Microsatellite DNA and Preliminary Genomic Analysis of Mud Carp (Cirrhina molitorella)

In order to determine the applicability of microsatellite primers developed from common carp （ Cyprinuscario ） for genomic analysis in mud carp （ Cirrhina molitorella ）, 24 primer pairs from common carp were designed to amplify microsatellite loci in the mud carp containing CA, GA, AT and GGGA sequences. Thirteen primers （54%） successfully amplified specific products in the mud carp and 11 primers （48%） showed high polymorphism in the mud carp population. The results indicated that the average number of alleles per locus in the mud carp stocks was 5.2. Average heterozygosity （Ho）, unbiased expected heterozygosity （He） and polymorphism information content （PIC） in the wild population were 0.61 ± 0.2, 0.8 ± 0.09 and 0.72 ± 0.1 respectively. Several Hardy-Weinberg departure value were significandy departed from Hardy-Weinberg equilibrium. The study showed that microsatellite primers from a species of Cyprinidae can be used for mud carp genetic analysis without much cost or time input.

Effects of Red Mud on the Remediation of Pb, Zn and Cd in Heavy Metal Contaminated Paddy Soil

[Objective] To study the remediation efficiency of red mud on Pb, Zn and Cd in the heavy metal contaminated paddy soil of mine area, to clarify its remediation mechanism and fertilizer efficiency on heavy metal contaminated soil. [Method] The soil incubation experiment was conducted to study the effect of red mud on the pH values and electrical conductivity （EC）, and the remediation efficiency of red mud on lead （Pb）, zinc （Zn） and cadmium （Cd） in heavy metal contaminated soil. [Result] Red mud addition reduced the content of exchangeable Pb, Zn and Cd in the soil significantly. Compared with the control, when incubated for 30, 60 and 90 d with the red mud dosage of 4% （W/W）, the exchangeable Pb content was decreased by 39.25%, 41.38% and 50.19%; exchangeable Zn content was decreased by 49.26%, 57.32% and 47.16%; and exchangeable Cd content was decreased by 19.53%, 24.06% and 25.70%, respectively. The application of red mud had significant impact on the share of Pb, Zn and Cd contents in five forms, and different amounts of red mud application all reduced the proportion of exchangeable Pb, Zn and Cd to the total Pb, Zn and Cd. In addition, the proportion of exchangeable Pb, Zn and Cd to total Pb, Zn and Cd decreased with the increasing amount of red mud addition. [Conclusion] The study provided references for reasonable application of red mud and reduction of heavy metal pollution in paddy soil.

Studies on the Extraction Methods of Metagenomic DNA from Mud Volcano in Xinjiang

[Objective]To seek one effective extraction method of metagenomic DNA from mud volcano.[Method]The metagenomic DNA from mud volcano was extracted by CTAB extraction method,SDS-enzyme method,improved method,reagent kit method.The extraction of four kinds of methods were compared.[Result]The extracted rate in reagent sets method was the highest,next was improved method,the extracted quantity in SDS-enzyme method was maximum.DNA extracted by the improved method was diluted ten times for PCR.[Conclusion]Considering economy and purity,the improved method can be used as one effective extraction method of metagenomic DNA from mud volcano.