The Utilization Methods of Multi-Media Technology in Higher VocationalEnglish Teaching

Not only does the multi-media technology in teaching help students arouse curiosity and draw their attention,but also it makes students enhance their language skills and master knowledge.It makes English teaching smooth.

The Optimization Study about Fault Self-Healing Restoration of Power Distribution Network Based on Multi-Agent Technology

In order to quickly and accurately locate the fault location of the distribution network and increase the stability of the distribution network,a fault recovery method based on multi-objective optimization algorithm is proposed.The optimization of the power distribution network fault system based on multiagent technology realizes fast recovery of multi-objective fault,solve the problem of network learning and parameter adjustment in the later stage of particle swarm optimization algorithm falling into the local extreme value dilemma,and realize the multi-dimensional nonlinear optimization of the main grid and the auxiliary grid.The system proposed in this study takes power distribution network as the goal,applies fuzzy probability algorithm,simplifies the calculation process,avoids local extreme value,and finally realizes the energy balance between each power grid.Simulation results show that the Multi-Agent Technology enjoys priority in restoring important load,shortening the recovery time of power grid balance,and reducing the overall line loss rate of power grid.Therefore,the power grid fault self-healing system can improve the safety and stability of the important power grid,and reduce the economic loss rate of the whole power grid.

Research on the process of fabricating a multi-layer metal micro-structure based on UV-LIGA overlay technology

In this paper,we report the study of the process of fabricating a multi-layermetal micro-structure using UV-LIGA overlay technology,includingmask fabrication,substrate treatment,and UV-LIGA overlay processes.To solve the process problems in the masking procedure,the swelling problemof the first layer of SU-8 thick photoresist was studied experimentally.The 5μmline-width compensation and closed 20μmand 30μmisolation strips were designed and fabricated around the micro-structure pattern.The pore problemin the Ni micro-electroforming layer was analyzed and the electroforming parameters were improved.The pH value of the electroforming solution should be controlled between 3.8 and 4.4 and the current density should be below 3 A/dm^2.To solve the problems of high inner stress and incomplete development of the micro-cylinder hole array with a diameter of 30μm,the lithography process was optimized.The pre-baking temperature was increased via gradient heating and rose every 5℃ from 65℃ to 85℃ and then remained at 85℃ for 50 min–1 h.In addition,the full contact exposure was used.Finally,a multi-layer metal micro-structure with high precision and good quality of microelectroforming layer was fabricated using UV-LIGA overlay technology.

Technology of structure damage monitoring based on multi-agent

The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent is a good candidate to be used in the field of structural health monitoring.A structural health monitoring system architecture based on multi-agent technology is proposed.The measurement system for aircraft airfoil is designed with FBG,strain gage,and corresponding signal processing circuit.The experiment to determine the location of the concentrate loading on the structure is carried on with the system combined with technologies of pattern recognition and multi-agent.The results show that the system can locate the concentrate loading of the aircraft airfoil at the accuracy of 91.2%.

A Study of Multi-Permeating TiN/Ti Alloying Layer Using Plasma Surface Alloying Technology

TiN/Ti multi-permeating alloying layer has been formed on the low carbon steel by means of the double glow-discharge plasma surface alloying technique and hollow-cathode effect. The alloying layer was detected by axiovert 25 CA optical microscope with computer analyzing software （LEC）, GDA-2 glow discharge spectroscopy （GDS）, X-ray diffraction （XRD） and galvanochemical method. The results showed that the thickness of TiN/Ti multi-permeating alloying layer was about 10μm, the content of Ti on the surface was up to 63.48 wt% and the content of N was up to 12.46 wt%. The atom Ti and N concentrations changed gradually across the depth of the alloying layer and the preferred orientation of TiN/Ti alloying layer was crystal surface （200）. The multi-permeating alloying layer and substrate were combined through metallurgy. The surface appearances of the multi-permeating alloying layer were uniform and of a compact cellular structure. The hardness of the surface was about 1600-3000 HV0.1. The corrosion resistance of the permeating TiN/Ti alloying layer in 0.5 mol/L H2SO4 solution was greatly increased and the corrosion rate was only 0.3082 g/m^2. h.

The study of protection coordination technology in power system based on Multi-Agent

This paper studies mainly how to make use of Multi- Agent technology to solve the complex problems which are caused by unsuitable coordination between protection and untimely action and protection fault activity in large power system, and realizes timely the coordination among protections effectively in when losing some or all information. Thus it overcomes the difficult of solving single or shore range information, enhances correspond and coordination among the intelligent protect Agent, raises the stable and reliable property, and promotes the process of power network for large area.

Agent Technology Application in Automating the Coordination and Decision-Making in Supply Chain

Coordinating all the activities among all the parties involved in supply chain can be a daunting task. This paper put forth the viewpoint of applying agent technology to automate the coordination and decision-making tasks in a typical home PC industry supply chain. The main features of the proposed approach, which differentiate it from other approaches, are the following:① In the prototype, the coordination agents have both cooperation and competition patterns; ② It uses JADE (Java Agent DEvelopment Framework) as the agent development environment to realize efficient and reusable agent software;③ It produces some innovative models for the business processes and issues faced by parties in the supply chain. A prototype and the overall process flow were also described.

Design of distance teaching platform based on Agent technology

The computer network technology and multi-media technology offer a new teaching mode for the distance education. Now there are still many problems in modern distance education such as weak generality, flexibility and intelligence, etc. This paper brought up a design mode of distance teaching platform based on Agent mechanism and the concrete implementation method through analyzing the characteristic and structure of Agent technology.

An Improved SOI CMOS Technology Based Circuit Technique for Effective Reduction of Standby Subthreshold Leakage

Silicon-on-insulator (SOI) CMOS technology is a very attractive option for implementing digital integrated circuits for low power applications. This paper presents migration of standby subthreshold leakage control technique from a bulk CMOS to SOI CMOS technology. An improved SOI CMOS technology based circuit technique for effective reduction of standby subthreshold leakage power dissipation is proposed in this paper. The proposed technique is validated through design and simulation of a one-bit full adder circuit at a temperature of 27℃, supply voltage, VDD of 0.90 V in 120 nm SOI CMOS technology. Existing standby subthreshold leakage control techniques in CMOS bulk technology are compared with the proposed technique in SOI CMOS technology. Both the proposed and existing techniques are also implemented in SOI CMOS technology and compared. Reduction in standby subthreshold leakage power dissipation by reduction factors of 54x and 45x foraone-bit full adder circuit was achieved using our proposed SOI CMOS technology based circuit technique in comparison with existing techniques such as MTCMOS technique and SCCMOS technique respectively in CMOS bulk technology. Dynamic power dissipation was also reduced significantly by using this proposed SOI CMOS technology based circuit technique. Standby subthreshold leakage power dissipation and dynamic power dissipation were also reduced significantly using the proposed circuit technique in comparison with other existing techniques, when all circuit techniques were implemented in SOI CMOS technology. All simulations were performed using Microwindver 3.1 EDA tool.

Development of Operational Space Environment Technology System

With the increasing of users and the demands which are transforming from the monotonous traditional service to network service,Multiple space environment web applications including browser-client,rich-client and mobile-client applications have been developed by SEPC(Space Environment Prediction Center,NSSC,CAS)during the past few years.The architecture of Operational Space Environment Technology System(OSETS) that these applications rely on is described and the description of structural optimization of the architecture is provided.To demonstrate the evolution of the OSETS,three web application examples for e SpaceWx,Space Weather Situation Awareness Picture(SWSAP),Plug-and-Play SWx Analysis and Plotting Program(PPSWAP) are presented.

Optimization Design System for Composite Structures Based on Grid Technology

To solve the topology optimization of complicated multi-objective continuous/discrete design variables in aircmit structure design, a Parallel Pareto Genetic Algorithm （PPGA） is presented based on grid platform in this paper. In the algorithm, the commercial finite element analysis （FEA） software is integrated as the calculating tool for analyzing the objective functions and the filter of Pareto solution set based on weight information is introduced to deal with the relationships among all objectives. Grid technology is utilized in PPGA to realize the distributed computations and the user interface is developed to realize the job submission and job management locally/remotely. Taking the aero-elastic tailoring of a composite wing for optimization as an example, a set of Pareto solutions are obtained for the decision-maker. The numerical results show that the aileron reversal problem can be solved by adding the limited skin weight in this system. The algorithm can be used to solve complicated topology optimization for composite structures in engineering and the computation efficiency can be improved greatly by using the grid platform that aggregates numerous idle resources.

An Extensive Study and Review of Privacy Preservation Models for the Multi-Institutional Data

The deep learning models hold considerable potential for clinical applications, but there are many challenges to successfully training deep learning models. Large-scale data collection is required, which is frequently only possible through multi-institutional cooperation. Building large central repositories is one strategy for multi-institution studies. However, this is hampered by issues regarding data sharing, including patient privacy, data de-identification, regulation, intellectual property, and data storage. These difficulties have lessened the impracticality of central data storage. In this survey, we will look at 24 research publications that concentrate on machine learning approaches linked to privacy preservation techniques for multi-institutional data, highlighting the multiple shortcomings of the existing methodologies. Researching different approaches will be made simpler in this case based on a number of factors, such as performance measures, year of publication and journals, achievements of the strategies in numerical assessments, and other factors. A technique analysis that considers the benefits and drawbacks of the strategies is additionally provided. The article also looks at some potential areas for future research as well as the challenges associated with increasing the accuracy of privacy protection techniques. The comparative evaluation of the approaches offers a thorough justification for the research’s purpose.

Inevitability and Emergent Problems of Science &Technology Innovation Access to Integration

The causes and the problems of integration of scientific ＆ technical innovation （ISTI） and inevitability are proposed. The status of domestic scientific ＆ technical innovation is analysed. A series of emergent managerial problems caused by the system ISTI （SISTI） are pointed out. Because of Hall three dimensions structure＇s enlightenment, a three dimensional logical net diagram in which the system integration of innovation based on problem in real world but not on disciplinary logic is drawn. The intelligent group＇ s need span is greater under the conditions of relatively low material level than common groups who have lower degree of education. The SISTI is composed by multi-rule and intelligent multi-agent behavior. It is concluded that the logical relationships of integrated technology which based on the author＇s experience and observation must be considerded for a valid management of SISTI.

Application of Combined Production Logging Technology in Horizontal Wells

随着海上油气田开发的不断深化,水平井技术已在增储上产中起到了巨大作用,但也面临着出水及含水不断升高的问题。进行水平段储层生产测井,确定井下层内生产情况及储层动用情况,是后期控水稳产、措施挖潜的关键。水平井因井眼轨迹与储层平行、流体重力分异明显、上/下坡流共存等因素,常规居中测量中心流速的测井技术已不适用;同时,水平井为单层开采,剩余油饱和度分布无标准水层刻度,为生产层剩余油分布监测提出了挑战。提出了阵列式多相流测井仪组合(MAPS)和剩余油饱和度测井技术(RPM)的组合测井方式,通过水平段截面速度剖面、流体性质分布以及剩余油饱和度分布三者间的相互验证、综合解释的解决方案,取得了良好效果。

Simple, Flexible, and Interoperable SCADA System Based on Agent Technology

SCADA (Supervisory Control and Data Acquisition) is concerned with gathering process information from industrial control processes found in utilities such as power grids, water networks, transportation, manufacturing, etc., to provide the human operators with the required real-time access to industrial processes to be monitored and controlled either locally (on-site)or remotely (i.e., through Internet). Conventional solutions such as custom SCADA packages, custom communication protocols, and centralized architectures are no longer appropriate for engineering this type of systems because of their highly distribution and their uncertain continuously changing working environments. Multi-agent systems (MAS) appeared as a new architectural style for engineering complex and highly dynamic applications such as SCADA systems. In this paper, we propose an approach for simply developing flexible and interoperable SCADA systems based on the integration of MAS and OPC process protocol. The proposed SCADA system has the following advantages: 1) simple (easier to be implemented);2) flexible (able to adapt to its environment dynamic changes);and 3) interoperable (relative to the underlying control systems, which belongs to diverse of vendors). The applicability of the proposed approach is demonstrated by a real case study example carried out in a paper mill.

种植技术和种植密度对吉花2号主要农艺性状和产量的影响

研究不同种植技术和种植密度对吉林省多粒型花生吉花2号主要农艺性状和产量的影响,筛选适宜吉林省生态环境的种植技术和最佳种植密度,完善吉花2号配套高效栽培技术。采用2种种植技术及5个种植密度(1.79×10^(5)、2.02×10^(5)、2.30×10^(5)、2.69×10^(5)、3.23×10^(5)株/hm^(2)),研究特定时期花生光合指标及产量变化。结果显示,吉花2号采用小垄双行种植技术、种植密度为2.02×10^(5)株/hm^(2)时生育期最短,较双粒穴播种植技术生育期提前1~2 d;植株的株高最小,有利于地下部干物质积累;叶面积系数最大,总光合势最大;产量最高(3651.15 kg/hm^(2)),较双粒穴播种植技术增产10.17%。小垄双行种植技术在不同密度下,吉花2号产量都高于双粒穴播种植技术。因此,小垄双行种植技术在生产上应大力推广。

第四代同步辐射光源加速器物理与技术

同步辐射光源是20世纪应用最广泛的高性能X射线源,已成为物理、化学、能源环境、生物医学、先进材料等领域前沿研究的重要工具。进入21世纪,基于电子储存环的同步辐射光源的发展前沿是第四代同步辐射光源(4GLS)。其采用紧凑型的多弯铁消色散结构,可以实现接近甚至达到X射线衍射极限的超低束流发射度,将光源亮度在第三代光源基础上进一步提升2—3个数量级。文章将重点介绍第四代同步辐射光源关键的加速器物理与技术,以及国际范围内第四代同步辐射光源装置的发展情况。

球形电动机及其研究发展综述

球形电动机是一种具有球体结构的新型电动机,可单机实现在三维空间内的多自由度运动,且适合应用于人工智能及姿态控制系统动量球等相关领域,得到了各国学者的广泛关注与研究。球形电动机拓展了转子运动范围,是电动机行业未来的一个重要发展方向。与传统单自由度电动机相比,球形电动机结构较为复杂,且运动模式较为特殊,因此,对球形电动机的分析研究有别于传统单自由度电动机。该文整理各国学者对球形电动机的研究工作,总结归纳球形电动机的概念及发展历程,对比研究球形电动机不同的工作原理、拓扑结构及设计优化方法,探讨球形电动机的性能、转子位置检测方法、控制方法、转子支撑方式、应用场合及关键技术,最后总结球形电动机的未来发展趋势。

面向技术多维特征的关键共性技术跨界溢出机理研究

关键共性技术的公共产品属性决定了其具有显著外部性特征,能够通过广泛的扩散与外溢充分发挥潜在价值,但目前对于关键共性技术的跨界溢出机理尚不明确,导致其经济社会价值难以得到充分发挥。文章面向技术多维特征构建组织合作-技术跨界溢出-产业关联三层网络,在测度技术跨界溢出效应基础上,结合多层网络模型探索关键共性技术跨界溢出机理,并对人工智能领域进行实证研究。结果表明:技术基本特征方面,已经跨界溢出的关键共性技术更不易产生新的跨界溢出;技术组织特征方面,关键共性技术不易在组织内部形成跨界溢出关系,共同研发的关键共性技术更易产生跨界溢出,组织合作对关键共性技术的跨界溢出存在抑制作用;技术产业特征方面,产业跨度大的关键共性技术不易产生跨界溢出,关键共性技术不易在关联产业间进行跨界溢出,产业关联广度越大越有利于关键共性技术的跨界溢出。本文从技术多维特征视角揭示了关键共性技术跨界溢出的影响机理,在一定程度上拓展和深化了技术跨界溢出的理论研究边界,为助推技术创新扩散、带动产业升级提供了有益启示。

页岩气勘探开发实验技术研究进展与发展方向

页岩气开发的成功得益于全新地质理论的建立及工程技术的进步,其中地质理论的创新离不开实验技术的突破与发展,但随着页岩气进入全面开发的新阶段,对实验方法、基础理论等方面提出了更高要求和技术挑战。为此,针对页岩气勘探开发过程中的关键问题,从页岩矿物组成、岩石物性、孔隙结构、含气性及可压性等5个方面展示了地质实验研究的进展和应用实例,分析了页岩气勘探开发实验研究面临的问题和挑战,并展望了其未来的发展方向和趋势。研究结果表明:①薄片鉴定和X射线衍射是页岩矿物分析最有效的定性定量方法,开展矿物成因实验研究对于揭示页岩成储规律及地质工程甜点段优选有着更重要的指导意义;②页岩物性测试方法多且标准不统一,需要根据研究目的选择适用的测试方法,开展地层条件下的物性测试对储量计算及开发效果评价更有帮助;③页岩孔隙结构表征已形成了从宏观到微观、从定性到定量、从二维到三维的综合评价方法,可指导开发层系划分和水平井靶窗优选;④页岩含气性评价已形成了现场含气量测试、等温吸附、气体碳同位素监测等实验方法,揭示了页岩气赋存状态和解吸规律,可有效指导气井生产制度制订和采收率提高;⑤页岩可压性评价已形成了X射线衍射、多尺度的裂缝网络刻画、三轴力学、差应变法、声波各向异性法及声发射法等实验方法,可指导水平井设计和压裂工艺优化。结论认为,建立跨尺度多方法深度融合的实验体系、加强原位条件下的页岩气储层评价、开展关键参数的动态演化和基于大数据模型的人工智能实验评价等是下一步研究方向,持续完善页岩气实验地质技术体系方可为页岩气高效勘探开发提供更好的理论基础和技术支撑。