THE CONSTRUCTION OF MULTITYPE CANONICAL MARKOV BRANCHING CHAINS IN RANDOM ENVIRONMENTS

The investigation for branching processes has a long history by their strong physics background, but only a few authors have investigated the branching processes in random environments. First of all, the author introduces the concepts of the multitype canonical Markov branching chain in random environment （CMBCRE） and multitype Markov branching chain in random environment （MBCRE） and proved that CMBCRE must be MBCRE, and any MBCRE must be equivalent to another CMBCRE in distribution. The main results of this article are the construction of CMBCRE and some of its probability properties.

基于Multi-Agent的无人机集群体系自主作战系统设计

针对无人集群自主作战体系设计中的关键问题,提出基于Multi-Agent的无人集群自主作战系统设计方法。建立无人集群各节点的Agent模型及其推演规则;对于仿真系统模块化和通用化的需求,设计系统互操作式接口和无人集群自主作战的交互关系;开展无人集群系统仿真推演验证。仿真结果表明,所提设计方案不仅能够有效开展并完成自主作战网络生成-集群演化-效能评估的全过程动态演示验证,而且能够通过重复随机试验进一步评估无人集群的协同作战效能,最后总结了集群协同作战的策略和经验。

Photophysical Property of Photoactive Molecules with Multibranched Push-Pull Structures

The structure-property characteristics of a series of newly synthesized intramolecular charge- transfer （ICT） compounds, single-branch monomer with triphenylmethane as electron donor and 2,1,3-benzothiadiazole as acceptor, the corresponding two-branch dimer and three- branch trimer, have been investigated by means of steady-state and femtosecond time- resolved stimulated emission fluorescence depletion （FS TR-SEP FD） techniques in different polar solvents. The TD-DFT calculations are further performed to explain the observed ICT properties. The interpretation of the experimental results is based on the comparative studies of the series of compounds which have increased amount of identical branch moiety. The similarity of the absorption and fluorescence spectra as well as strong solvent-dependence of the spectral properties for the three compounds reveal that the excited state of the dimer and trimer are nearly the same with that of the monomer, which may localize on one branch. It is found that polar excited state emerged through multidimensional intramolecular charge transfer from the donating moiety to the acceptor upon excitation, and quickly relaxed to one branch before emission. Even so, the red-shift in the absorption and emission spectra and decreased fluorescence radiative lifetime with respect to their monomer counterpart still suggest some extent delocalization of excited state in the dimer and trimer upon excitation. The similar behavior of their excited ICT state is demonstrated by FS TR-SEP FD measurements, and shows that the trimer has the largest charge-separate extent in all studied three samples. Finally, steady-state excitation anisotropy measurements has further been carried out to estimate the nature of the optical excitation and the mechanism of energy redistribution among the branches, where no plateau through the ICT band suggests the intramolecular excitation transfer process between the branches in dimer and trimer.

Sleeve bridging of the rhesus monkey ulnar nerve with muscular branches of the pronator teres: multiple amplification of axonal regeneration

Multiple-bud regeneration, i.e., multiple amplification, has been shown to exist in peripheral nerve regeneration. Multiple buds grow towards the distal nerve stump during proximal nerve fiber regeneration. Our previous studies have verified the limit and validity of multiple ampli- fication of peripheral nerve regeneration using small gap sleeve bridging of small donor nerves to repair large receptor nerves in rodents. The present study sought to observe multiple ampli- fication of myelinated nerve fiber regeneration in the primate peripheral nerve. Rhesus monkey models of distal ulnar nerve defects were established and repaired using muscular branches of the right forearm pronator teres. Proximal muscular branches of the pronator teres were su- tured into the distal ulnar nerve using the small gap sleeve bridging method. At 6 months after suture, two-finger flexion and mild wrist flexion were restored in the ulnar-sided injured limbs of rhesus monkey. Neurophysiological examination showed that motor nerve conduction veloc- ity reached 22.63 _＋ 6.34 m/s on the affected side of rhesus monkey. Osmium tetroxide staining demonstrated that the number of myelinated nerve fibers was 1,657 ＋ 652 in the branches of pronator teres of donor, and 2,661 ~ 843 in the repaired ulnar nerve. The rate of multiple amplification of regenerating myelinated nerve fibers was 1.61. These data showed that when muscular branches of the pronator teres were used to repair ulnar nerve in primates, effective regeneration was observed in regenerating nerve fibers, and functions of the injured ulnar nerve were restored to a certain extent. Moreover, multiple amplification was subsequently detected in ulnar nerve axons.

Parameters Optimization of Multi-Branch Horizontal Well Basing on Streamline Simulation

As a highly efficient production method, the technique of multi-branch horizontal well is widely used in low permeability reservoirs, heavy oil reservoirs, shallow layer reservoirs and multi-layer reservoirs, because it can significantly improve the productivity of a single well, inhibit coning and enhance oil recovery. Study on sweep efficiency and parameters optimization of multi-branch horizontal well is at the leading edge of research. Therefore, the study is important for enhancing oil recovery and integral exploitation benefit of oil fields. In many applications, streamline simulation shows particular advantages over finite-difference simulation. With the advantages of streamline simulation such as its ability to display paths of fluid flow and acceleration factor in simulation, the flooding process is more visual. The communication between wells and flooding area has been represented appropriately. This method has been applied to the XS9 reservoir in Daqing Oilfield. The production history of this reservoir is about 10 years. The reservoir is maintained above bubble point so that the simulation meets the slight compressibility assumption. New horizontal wells are drilled following this rule.

Large borehole with multi-lateral branches: A novel solution for exploitation of clayey silt hydrate

Raising the in situ decomposition rate of natural gas hydrate and increasing the decomposition contact area are two main ways to raise the productivity of hydrate. An exploitation technique based on large borehole with multi-lateral branches (LB & MB) was proposed in this paper. This technique is mainly intended for the clayey silt hydrate reservoir in the South China Sea, and its main purpose is to alleviate the sand output from formation for maintaining the stability of the reservoir and to greatly increase the gas productivity of the reservoir. In this paper, the following aspects were mainly expounded: definition of the basic geometric parameters for layout of multi-lateral branches in clayey silt hydrate reservoir, simulation of the stimulation effect of a typical well profile with two branches, and prediction and simulation of the reservoir failure risk in a well profile with eight branches. The results show that the LB & MB effectively improves the flow field in the formation, raises the productivity of the reservoir and may also help to decrease the produced water-gas ratio (WGR). When the lateral branches spacing is too small, the failure zones around adjacent lateral branches overlap each other, possibly causing reservoir failure in a larger range. Therefore, the geometric parameters of multi-lateral branches depend on the dual control of the productivity and geotechnical risk factor of reservoir. Further study is being carried out, so as to obtain the optimal combination of parameters of multi-lateral branches.

Dual-Branch Multi-Level Feature Aggregation Network for Pansharpening

Dear Editor,In pansharpening task,the most existing deep-learning-based pansharpening methods fail to fully utilize the different level features,inevitably leading to spectral or spatial distortions.To address this challenge,in this letter,we propose a dual-branch multi-level feature aggregation network for pansharpening(DMFANet).

Cotton GhBRC1 regulates branching,flowering,and growth by integrating multiple hormone pathways

Cotton architecture is partly determined by shoot branching and flowering patterns.Gh BRC1 was previously identified by RNA-seq analysis of nulliplex-branching and normal-branching cotton.However,the roles of Gh BRC1 in cotton remain unclear.In the present study,investigations of nuclear localization and transcriptional activity indicated that Gh BRC1 has characteristics typical of transcription factors.Gene expression analysis showed that Gh BRC1 was highly expressed in axillary buds but displayed different expression patterns between the two branching types.Overexpression of Gh BRC1 in Arabidopsis significantly inhibited the number of branches and promoted flowering.In contrast,silencing Gh BRC1 in cotton significantly promoted seedling growth.Gh BRC1 was induced by multiple hormones,including strigolactones,which promoted seedling growth and seed germination of Arabidopsis plants overexpressing Gh BRC1.Consistent with these findings,RNA-seq analysis of virus-induced gene silencing treated cotton revealed that a large number of genes were differentially expressed between Gh BRC1-silenced and control plants,and these genes were significantly enriched in plant hormone signalling pathways.Together,our data indicates that Gh BRC1 regulates plant branching and flowering through multiple regulatory pathways,especially those regulating plant hormones,with functions partly differing from those of Arabidopsis BRC1.These results provide insights into the molecular mechanisms controlling plant architecture,which is important for breeding cotton with ideal plant architecture and high yield.

Parallelization of a Branch and Bound Algorithm on Multicore Systems

The general m-machine permutation flowshop problem with the total flow-time objective is known to be NP-hard for m ≥ 2. The only practical method for finding optimal solutions has been branch-and-bound algorithms. In this paper, we present an improved sequential algorithm which is based on a strict alternation of Generation and Exploration execution modes as well as Depth-First/Best-First hybrid strategies. The experimental results show that the proposed scheme exhibits improved performance compared with the algorithm in [1]. More importantly, our method can be easily extended and implemented with lightweight threads to speed up the execution times. Good speedups can be obtained on shared-memory multicore systems.

Rate Coefficients and Branching Ratio for Multi-Channel Hydrogen Abstractions from CH3OH by F

The hydrogen abstraction reaction F+CH3OH has two possible reaction pathways: HF+CH3O and HF+CH2OH. Despite the absence of intrinsic barriers for both channels, the former has a branching ratio comparable to the latter, which is far from the statistical limit of 0.25 (one out of four available H atoms). Furthermore, the measured branching ratio of the two abstraction channels spans a large range and is not quantitatively reproduced by previous theoretical predictions based on the transition-state theory with the stationary point information calculated at the levels of MФller-Plesset perturbation theory and G2. This work reports a theoretical investigation on the kinetics and the associated branching ratio of the two competing channels of the title reaction using a quasi-classical trajectory approach on an accurate full-dimensional potential energy surface (PES) fitted by the permutation invariant polynomial-neural network approach to ca. 1.21x10^5 points calculated at the explicitly correlated (F12a) version of coupled cluster singles doubles and perturbative triples (CCSD(T)) level with the aug-cc-pVDZ basis set. The calculated room temperature rate coeffcient and branching ratio of the HF+CH3O channel are in good agreement with the available experimental data. Furthermore, our theory predicts that rate coeffcients have a slightly negative temperature dependence, consistent with barrierless nature of the reaction.

A Comparative Study of Acute Hemodynamic Effects of Multi -site Cardiac Pacing in patients with cardiac function NYHA class ⅠtoⅡ without bundle branch block

Objective To compare the acute hemodynamic effects of five different pacing modes in patients with cardiac function NYHA class Ⅰ to Ⅱ without bundle branch block (BBB). Methods This study included 12 patients (SSS 7, Ⅲ°AVB 5) undergoing pacemaker implantation. Right ventricular apex (RVA), right ventricular outflow tract (RVOT), right ventricular bifocal (RV-Bi), left ventricular base (LVB) and bi -ventricular (Bi-Ⅴ) pacing at 60 -80 ppm were done in VVI mode prior to implantation of DDD pacemaker. The cardiac index (CI), mean pulmonary artery pressure (mPAP) and pulmonary capillary wedge pressure (PCWP) were measured with Swan - Ganz thermodilution catheter after 5 minutes of each pacing mode. Results (1) Comparing to pacing at RVA (CI: 2. 41± 0. 38 L/min per m2, PCWP: 16. 7 ±3.3 mmHg), the CI increased and the PCWP decreased significantly in pacing at RVOT(CI: 2. 63 ± 0.46, PCWP: 13. 8±2. 3), LVB(CI: 2. 78±0.52, PCWP: 14. 4±3.1), RV-Bi(CI: 2. 83±0.57, PCWP: 12. 8± 2. 5) and Bi -Ⅴ pacing (CI: 2. 94± 0.60, PCWP: 12. 7±2. 5), P < 0. 01, respectively. (2) The CI of RV-Bi and Bi-Ⅴ pacing was higher than that of RVOT and LVB pacing, the PCWP was lower, P < 0. 05, respectively. (3) There was no significant difference between RV - Bi pacing and Bi-Ⅴ pacing in CI and PCWP. Conclusion There is no significant difference between RV - Bi pacing and Bi -V pacing in the acute hemodynamic effects; however,dual - site pacing is much better than single site pacing in that aspect for patients with cardiac function NYHA class Ⅰ to Ⅱ without BBB. Among single site pacing, the RVOT and LVB pacing is better than RVA pacing in cardiac function.

A branch-and-bound algorithm for multi-dimensional quadratic 0-1 knapsack problems

In this paper, a branch-and-bound method for solving multi-dimensional quadratic 0-1 knapsack problems was studied. The method was based on the Lagrangian relaxation and the surrogate constraint technique for finding feasible solutions. The Lagrangian relaxations were solved with the maximum-flow algorithm and the Lagrangian bounds was determined with the outer approximation method. Computational results show the efficiency of the proposed method for multi-dimensional quadratic 0-1 knapsack problems.

A branch-and-bound algorithm for discrete multi-factor portfolio optimization model

In this paper, a new branch-and-bound algorithm based on the Lagrangian dual relaxation and continuous relaxation is proposed for discrete multi-factor portfolio selection model with roundlot restriction in financial optimization. This discrete portfolio model is of integer quadratic programming problems. The separable structure of the model is investigated by using Lagrangian relaxation and dual search. Computational results show that the algorithm is capable of solving real-world portfolio problems with data from US stock market and randomly generated test problems with up to 120 securities.

联合物理层与MAC层的multi-TRP上行重叠传输处理机制

针对非理想回程下现有协议难以有效处理多传输接收节点(multi-TRP)场景中多定时提前(multi-TA)导致的严重上行链路(UL)重叠传输问题,联合改进物理层复用技术和介质访问控制(MAC)令牌桶技术,提出了一种新型的UL重叠传输处理机制。该新型机制通过改进物理层重叠信道识别流程、复用要求及复用规则,将物理层复用信息与重叠信息反馈至MAC层,并对MAC层令牌桶技术进行优化。通过仿真实验对所提机制与现有协议机制进行对比,结果表明,在逻辑时隙不可重叠和可重叠2种情形下,物理上行控制信道(PUCCH)实际复用数量性能平均提升了57.58%和49.40%,物理上行共享信道(PUSCH)实际可用资源数量性能平均提升了12.09%和26.03%;优先级最高逻辑信道实际占用资源数量性能平均提升了33.33%和45.48%。

基于Multi-Agent的水电站变压器故障诊断系统

为了精准、快速完成水电站变压器的故障诊断,设计基于Multi-Agent的水电站变压器故障诊断系统。变压器状态监控agent将检测到的变压器故障信息发送给系统管理agent,系统管理agent通过通信agent将变压器故障信息发送给变压器故障诊断agent,变压器故障诊断agent利用小波变换方法提取变压器故障特征,并将其作为IFOA-SVM模型输入,完成变压器故障分类后,获取变压器故障诊断结果,该结果通过通信agent显示给用户。实验表明,该系统可有效诊断变压器故障诊断,诊断成功率受系统故障信息丢失率的影响较小,诊断耗时、耗能小,并具有较高故障诊断成功率。

Toughening of Poly (L-lactide) with Branched Multiblock Poly (ε-caprolactone)/poly (D-lactide) Copolymers

A total biodegradable elastomer,branched multiblock poly( ε-caprolactone)/poly( D-lactide)( BMCD) was prepared using 3-isocyanatopropyltriethoxysilane( IPTS) as a coupling agent.To improve the toughness of poly( L-lactide)( PLLA),PLLA/BMCD blends were prepared via a simple solvent evaporation method at various BMCD loadings. Tensile test showed that the elongation at break of PLLA blends increased to 50. 97% and104. 55% at the loadings of 5% and 7%( mass fraction) BMCD respectively, with no sacrifice of their biodegradability. This approach allowed for simultaneous control of mechanical and biodegradable properties of PLLA with a few additives in actual production. Furthermore, UV-VIS test showed that the light transmittance of the films at the loadings of 5%( mass fraction)BMCD was almost the same as pure PLLA at 400 nm.

Left bundle branch pacing vs biventricular pacing in heart failure patients with left bundle branch block:A systematic review and meta-analysis

BACKGROUND Left bundle branch pacing(LBBP)is a novel pacing modality of cardiac resynchronization therapy(CRT)that achieves more physiologic native ventricular activation than biventricular pacing(BiVP).AIM To explore the validity of electromechanical resynchronization,clinical and echocardiographic response of LBBP-CRT.METHODS Systematic review and Meta-analysis were conducted in accordance with the standard guidelines as mentioned in detail in the methodology section.RESULTS In our analysis,the success rate of LBBP-CRT was determined to be 91.1%.LBBP CRT significantly shortened QRS duration,with significant improvement in echocardiographic parameters,including left ventricular ejection fraction,left ventricular end-diastolic diameter and left ventricular end-systolic diameter in comparison with BiVP-CRT.CONCLUSION A significant reduction in New York Heart Association class and B-type natriuretic peptide levels was also observed in the LBBP-CRT group vs BiVP-CRT group.Lastly,the LBBP-CRT cohort had a reduced pacing threshold at follow-up as compared to BiVP-CRT.

Left bundle branch pacing set to outshine biventricular pacing for cardiac resynchronization therapy?

The deleterious effects of long-term right ventricular pacing necessitated the search for alternative pacing sites which could prevent or alleviate pacinginduced cardiomyopathy.Until recently,biventricular pacing(BiVP)was the only modality which could mitigate or prevent pacing induced dysfunction.Further,BiVP could resynchronize the baseline electromechanical dssynchrony in heart failure and improve outcomes.However,the high non-response rate of around 20%-30%remains a major limitation.This non-response has been largely attributable to the direct non-physiological stimulation of the left ventricular myocardium bypassing the conduction system.To overcome this limitation,the concept of conduction system pacing(CSP)came up.Despite initial success of the first CSP via His bundle pacing(HBP),certain drawbacks including lead instability and dislodgements,steep learning curve and rapid battery depletion on many occasions prevented its widespread use for cardiac resynchronization therapy(CRT).Subsequently,CSP via left bundle branch-area pacing(LBBP)was developed in 2018,which over the last few years has shown efficacy comparable to BiVP-CRT in small observational studies.Further,its safety has also been well established and is largely free of the pitfalls of the HBP-CRT.In the recent metanalysis by Yasmin et al,comprising of 6 studies with 389 participants,LBBPCRT was superior to BiVP-CRT in terms of QRS duration,left ventricular ejection fraction,cardiac chamber dimensions,lead thresholds,and functional status amongst heart failure patients with left bundle branch block.However,there are important limitations of the study including the small overall numbers,inclusion of only a single small randomized controlled trial(RCT)and a small follow-up duration.Further,the entire study population analyzed was from China which makes generalizability a concern.Despite the concerns,the meta-analysis adds to the growing body of evidence demonstrating the efficacy of LBBP-CRT.At this stage,one must acknowledge that the fact that still our opinions on this technique are largely based on observational data and there is a dire need for larger RCTs to ascertain the position of LBBPCRT in management of heart failure patients with left bundle branch block.

Optimization for Hydroforming Loading Paths of Parallel Multi-branch Tubes Based on Grey System Theory

According to characteristic of hydroforming of parallel multi-branch tubes,multi-objective problems were transformed to single objective problem of relational grade comparison by grey system theory.Two different objectives were selected,according to the principle that process parameters were optimal which of grey relational grade were maximum,the optimal loading parameters under different objective condition were obtained,and loading paths were optimized.The results indicated that parallel multi-branch tubes hydroformed under loading paths optimized by grey system theory could meet with the requirement that objective was optimal.And the optimal loading paths under different objectives were different,and the appropriate objective should be selected according to forming characteristic.

Proppant transport law in multi-branched fractures induced by volume fracturing

To further clarify the proppant transport and placement law in multi-branched fractures induced by volume fracturing, proppant transport simulation experiments were performed with different fracture shapes, sand ratios, branched fracture opening time and injection sequence of proppants in varied particle sizes. The results show that the settled proppant height increases and the placement length decreases in main fractures as the fracturing fluid diverts gradually to the branched fractures at different positions. The flow rate in branched fractures is the main factor affecting their filling. The diverion to branched fractures leads to low flow rate and poor filling of far-wellbore branched fractures. The inclined fracture wall exerts a frictional force on the proppant to slow its settlement, thus enhancing the vertical proppant distribution in the fracture. The increase of sand ratio can improve the filling of near-wellbore main fracture and far-wellbore branched fracture and also increase the settled proppant height in main fracture. Due to the limitation of fracture height, when the sand ratio increases to a certain level, the increment of fracture filling decreases. When branched fracture is always open(or extends continuously), the supporting effect on the branched fractures is the best, but the proppant placement length within the main fractures is shorter. The fractures support effect is better when it is first closed and then opened(or extends in late stage) than when it is first opened and then closed(or extends in early stage). Injecting proppants with different particle sizes in a specific sequence can improve the placement lengths of main fracture and branched fracture. Injection of proppants in an ascending order of particle size improves the near-wellbore fracture filling, to a better extent than that in a descending order of particle size.