Functional thermal fluids and their applications in battery thermal management:A comprehensive review

With the increasing requirements for fast charging and discharging,higher requirements have been put forward for the thermal management of power batteries.Therefore,there is an urgent need to develop efficient heat transfer fluids.As a new type of heat transfer fluids,functional thermal fluids mainly includ-ing nanofluids(NFs)and phase change fluids(PCFs),have the advantages of high heat carrying density,high heat transfer rate,and broad operational temperature range.However,challenges that hinder their practical applications remain.In this paper,we firstly overview the classification,thermophysical prop-erties,drawbacks,and corresponding modifications of functional thermal fluids.For NFs,the high ther-mal conductivity and high convective heat transfer performance were mainly elaborated,while the stability and viscosity issues were also analyzed.And then for PCFs,the high heat carrying density was mainly elaborated,while the problems of supercooling,stability,and viscosity were also analyzed.On this basis,the composite fluids combined NFs and PCFs technology,has been summarized.Furthermore,the thermal properties of traditional fluids,NFs,PCFs,and composite fluids are compared,which proves that functional thermal fluids are a good choice to replace traditional fluids as coolants.Then,battery thermal management system(BTMS)based on functional thermal fluids is summarized in detail,and the thermal management effects and pump consumption are compared with that of water-based BTMS.Finally,the current technical challenges that parameters optimization of functional thermal fluids and structures optimization of BTMS systematically are presented.In the future,it is necessary to pay more attention to using machine learning to predict thermophysical properties of functional thermal fluids and their applications for BTMS under actual vehicle conditions.

Distributed Optimal Co-multi-microgrids Energy Management for Energy Internet

Unlike conventional power systems, the upcoming energy internet U+0028 EI U+0029 emphasizes comprehensive utilization of energy in the whole power system by coordinating multi-microgrids, which also brings new challenge for the energy management. To address this issue, this paper proposes a novel consensus-based distributed approach based on multi-agent framework to solve the energy management problem of the energy internet, which only requires local information exchange among neighboring agents. Correspondingly, two consensus algorithms are presented, one of which drives the incremental cost of each distributed generator U+0028 DG U+0029 converge to the state of the leader agent-energy router, and the other one is used to estimate the global power mismatch, which is a first-order average consensus algorithm modified by a correction term. In addition, in order to meet the supply-demand balance, an effective control strategy for the energy router is proposed to accurately calculate the power exchange between the microgrid and the main grid. Finally, simulation results within a 7-bus test system are provided to illustrate the effectiveness of the proposed approach. © 2014 Chinese Association of Automation.

Interaction between climate and management on beta diversity components of vegetation in relation to soil properties in arid and semi-arid oak forests, Iran

This study aimed to investigate the interaction between regions with different climatic conditions(arid vs. semi-arid) and management(protected vs. unprotected) on the turnover and nestedness of vegetation in relation to physical, chemical and biological properties of soils in the Ilam Province of Iran. In each of the two regions, we sampled 8 sites(4 managed and 4 unmanaged sites) within each of which we established 4 circular plots(1000 m^2) that were used to investigate woody species, while two micro-plots(1 m×1 m) were established in each 1000-m^2 plot to analyze herbaceous species. In each sample unit, we also extracted three soil samples(0–20 cm depth) for measuring soil properties. The results indicated that the interaction between region and conservational management significantly affected the percent of canopy cover of Persian oak(Quercus brantii Linddl), soil respiration, substrate-induced respiration, as well as beta and gamma diversities and turnover of plant species. The percent of oak canopy cover was positively correlated with soil silt, electrical conductivity, available potassium, and alpha diversity, whereas it was negatively correlated with plant turnover. In addition, plant turnover was positively related to available phosphorus, while nestedness of species was positively related to organic carbon and total nitrogen. According to these results, we concluded that physical, chemical, and biological characteristics of limited ecological niche generally influenced plant diversity. Also, this study demonstrated the major contribution of the beta diversity on gamma diversity, especially in semi-arid region, because of the higher heterogeneity of vegetation in this area.

Mechanical and thermo-physical properties of rapidly solidified Al-50Si-Cu(Mg) alloys for thermal management application

Al-high Si alloys were designed by the addition of Cu or Mg alloying elements to improve the mechanical properties. It is found that the addition of 1 wt.% Cu or 1 wt.% Mg as strengthening elements significantly improves the tensile strength by 27.2% and 24.5%, respectively. This phenomenon is attributed to the formation of uniformly dispersed fine particles(Al2Cu and Mg2Si secondary phases) in the Al matrix during hot press sintering of the rapidly solidified(gas atomization) powder. The thermal conductivity of the Al-50 Si alloys is reduced with the addition of Cu or Mg, by only 7.3% and 6.8%, respectively. Therefore, the strength of the Al-50 Si alloys is enhanced while maintaining their excellent thermo-physical properties by adding 1% Cu(Mg).

Thermo-Physical Potential of Recycled Banana Fibers for Improving the Thermal and Mechanical Properties of Biosourced Gypsum-Based Materials

The development of bio-sourced materials is essential to ensuring sustainable construction;it is considered a locomotive of the green economy.Furthermore,it is an abundant material in our country,to which very little attention is being given.This work aims to valorize the waste of the trunks of banana trees to be used in construction.Firstly,the physicochemical properties of the fiber,such as the percentage of crystallization and its morphology,have been determined by X-ray diffraction tests and scanning electron microscopy to confirm the potential and the impact of the mode of drying on the quality of the banana fibers,with the purpose to promote the use of this material in construction.Secondly,the results obtained with the gypsum matrix allowed us to note a preponderant improvement in the composite’s thermal properties thanks to the variation of the banana fiber additive.Thirdly,the impact of the nature of the banana fiber distribution(either fiber mixed in matrix or fiber series model)on the flexural and compressive strengths of the composites was studied.The results obtained indicate that the insulation gain reaches up to 40%.It depends on the volume fraction and type of distribution of the banana fibers.However,the thermal inertia of the composites developed,represented by thermal diffusivity and thermal effusivity,was studied.Results indicate a gain of 40%and 25%,respectively,in terms of thermal diffusivity and thermal effusivity of the developed composites compared to plaster alone.Concerning the mechanical properties,the flexural strength depends on the percentage of the volume fraction of banana fibers used,and it can reach 20%more than the flexural strength of plaster;nevertheless,there is a significant loss in terms of the compressive strength of the studied composites.The results obtained are confirmed by the microstructure of the fiber banana.In fact,the morphology of the banana fibers was improved by the drying process.It reduces the amorphous area and improves the cellulosic crystalline surfaces,which assures good adhesion between the fiber and the matrix plaster.Finally,the dimensionless coefficient analysis was done to judge the optimal proportion of the banana fiber additive and to recommend its use even on false ceilings or walls.

Protection and Management of Intellectual Properties in the Networked Manufacturing

Networked manufacturing is a primary management mod e of virtual enterprise. It takes advantage of advanced network technology to pass information and devise and assemble necessary components so as to reach a certa in specific purpose. The characteristics of it are dynamic, international and pr ompt. In contrast with traditional manufacturing, networked manufacturing utilizes external predominant resources, and breaks through tangible limits of enterpris e, so it can optimize the combination of social resources and improve the enterp rise′capability of adapting to the constantly changing market. Networked manufacturing produces some problems while bringing enterprise infin ite commercial chance. Compared with traditional manufacturing, stealing intelle ctual achievements and encroaching the related property rights not only becomes easier and quicker, but also leaves no traces when enterprises transfer informat ion through network. It′s well known that competition among corporations in the future is the on e of intellectual property in the final analysis. Therefore, recently, the statu s of intellectual property protection is promoted grandly. In the following parts, several proposals on protecting intellectual property ar e put forward in detail. We can protect the intellectual property by the ways of strengthening the consci ousness of protection. We can protect the intellectual property by perfecting the law. We will know which behaviors on the network are legitimate and which one are illegitimate. As a result, it can decrease and resolve the conflicts partially. Besides, the article puts forward that the conflicts can be resolved through a m edi-institution, an authoritative governmental organization. Moreover, we should strengthen the education on ethics. At last, the paper presents that we can protect our intellectual property throug h international cooperation.

Research on Product Data Management Based on Multi-agent System

PDM (product data management) is one kind of techniques based on software and database, which integrates information and process related to products. But it is not enough to perform the complication of PDM in enterprises. Then the mechanism to harmonize all kinds of information and process is needed. The paper introduces a novel approach to implement the intelligent monitor of PDM based on MAS (multi agent system). It carries out the management of information and process by MC (monitor center). The paper first puts forward the architecture of the whole system, then defines the structure of MC and its interoperation mode.

Data Mining-Based Maintenance Management Framework of Multi-component System

Complex repairable system is composed of thousands of components.Some maintenance management and decision problems in maintenance management and decision need to classify a set of components into several classes based on data mining.Furthermore,with the complexity of industrial equipment increasing,the managers should pay more attention to the key components and carry out the lean management is very important.Therefore,the idea"customer segmentation"of"precise marketing"can be used in the maintenance management of the multi-component system.Following the idea of segmentation,the components of multicomponent systems should be subdivied into groups based on specific attributes relevant to maintenance,such as maintenance cost,mean time between failures,and failure frequency.For the target specific groups of parts,the optimal maintenance policy,health assessment and maintenance scheduling can be determined.The proposed analysis framework will be given out.In order to illustrate the effectiveness of this method,a numerical example is given out.

Multi-objective Optimization Design of Wing Structure with the Model Management Framework

Evolutionary algorithm is time-consuming because of the large number of evolutions and much times of finite element analysis, when it is used to optimize the wing structure of a certain high altitude long endurance unmanned aviation vehicle（UAV）. In order to improve efficiency it is proposed to construct a model management framework to perform the multi-objective optimization design of wing structure. The sufficient accurate approximation models of objective and constraint functions in the wing structure optimization model are built when using the model management framework, therefore in the evolutionary algorithm a number of finite element analyses can he avoided and the satisfactory multi-objective optimization results of the wing structure of the high altitude long endurance UAV are obtained.

Study on spatial temporal model in property management information system

Time is an important dimension for information in the geographical information system. Data, such as the historical state of target property space and related events causing the state to be changed, should be saved as important files. This should be applied to property management. This paper designs and constructs a spatial temporal model, which is suitable to the property data changing management and spatial temporal query by analyzing the basic types and characteristics of property management spatial changing time and date. This model uses current and historical situational layers to organize and set up the relationship between current situation data and historical dates according to spatial temporal topological relations in property entities. By using Map Basic, housing property management and spatial query is realized.

Intellectual Property Management in Technology Transfer among Companies

Intellectual property management plays a very important role in the process of technology transformation among different companies. This article discusses the main methods and mode which companies usually used to manage their IPM in market. Some suggestions are also provided for the company managers.

Property Rights, Institutions and Forest Resources Management in Developing Countries

The objective of this paper is to propose a conceptual framework stimulating the sustainable management of natural resources in Central Africa. Based on the forest resources, we show how good identification and allocation of property rights strengthen the joint management of forest resources. Cameroon is selected as an example, since the country represents one of the most forest-intense areas in Africa. In doing so, we first evaluate the performance of institutions in fostering sustainable forest management. Second we show how good elaboration and allocation of property rights may contribute to improving efficiency in forest management. Using the New Institutional Economic (NIE) theory we provide an outline of the potential relationships between forest management and property rights allocated to stakeholders involved in forest exploitation. Finally we provide two forms of institutional structures that could improve forest management efficiency: public-private partnership and multi-stakeholder management approaches. Public-private partnerships are joint project management processes operated by both private businesses and public entities in order to combine public prescriptive mechanisms with private operational roles. Multi-stakeholder management approach is also a co-management initiative combining public entities, private actors and local population to increase the involvement of local dwellers living in forest areas in the decision process.

Initiative Optimization Operation Strategy and Multi-objective Energy Management Method for Combined Cooling Heating and Power

This paper proposed an initiative optimization operation strategy and multi-objective energy management method for combined cooling heating and power U+0028 CCHP U+0029 with storage systems. Initially, the initiative optimization operation strategy of CCHP system in the cooling season, the heating season and the transition season was formulated. The energy management of CCHP system was optimized by the multi-objective optimization model with maximum daily energy efficiency, minimum daily carbon emissions and minimum daily operation cost based on the proposed initiative optimization operation strategy. Furthermore, the pareto optimal solution set was solved by using the niche particle swarm multi-objective optimization algorithm. Ultimately, the most satisfactory energy management scheme was obtained by using the technique for order preference by similarity to ideal solution U+0028 TOPSIS U+0029 method. A case study of CCHP system used in a hospital in the north of China validated the effectiveness of this method. The results showed that the satisfactory energy management scheme of CCHP system was obtained based on this initiative optimization operation strategy and multi-objective energy management method. The CCHP system has achieved better energy efficiency, environmental protection and economic benefits. © 2014 Chinese Association of Automation.

Intelligent Multi-Agent Based Information Management Methods to Direct Complex Industrial Systems

In recent years, the increasingly complexity of the logistic and technical aspects of the novel manufacturing environments, as well as the need to increase the performance and safety characteristics of the related cooperation, coordi-nation and control mechanisms is encouraging the development of new information management strategies to direct and man- age the automated systems involved in the manufacturing processes. The Computational Intelligent (CI) approaches seem to provide an effective support to the challenges posed by the next generation industrial systems. In particular, the Intelligent Agents (IAs) and the Multi-Agent Systems (MASs) paradigms seem to provide the best suitable solutions. Autonomy, flexibility and adaptability of the agent-based technology are the key points to manage both automated and information processes of any industrial system. The paper describes the main features of the IAs and MASs and how their technology can be adapted to support the current and next generation advanced industrial systems. Moreover, a study of how a MAS is utilized within a productive process is depicted.

Study on Shanghai residential property management problems and countermeasures

Based on the Shanghai residential property management of Present Situation and Research, pointed out that a comprehensive and systematic residential property management problems existing in the development and analysis of problems to various reasons, which made the countermeasures and suggestions for the existing problems of property management to promote the development of the property management industry. The thesis is divided into four parts： The first part is the profiles of Shanghai residential property management; the second part analyzes the current investigation of residential property management; and the third part is the cause analysis of the residential property management problems; Part IV presents relevant countermeasures.

ICI Management for Efficient Radio Resource Allocation in Multi-Cell OFDMA Networks

Two Inter-cell Interference (ICI) management algorithms: Primary Interference Balancing (PIB) algorithm and Interfering Bits Loading Avoidance (IBLA) algorithm are proposed for canceling the ICI effects which the existing efficient radio resource allocation algorithms do not consider. The efficient radio resource allocation algorithm, i.e., Pre-assignment and Reassignment (PR) algorithm, obtains the lowest complexity and achieves good throughput performance in single cell OFDMA system. However, in multi-cell multi-sector OFDMA networks, PR algorithm is not applicable because it does not take ICI into consideration. The proposed PIB algorithm balances the number of loading bits for the desired User Equipment (UE) and the major interfering UE, as well as optimizes the SINR performance; meanwhile, IBLA avoids loading certain number of interfering bits which would make SINR unqualified. Simulations confirm the ICI management effectiveness and feasibility of both the proposals.

Management of University Intellectual Property Problems and Countermeasures

university intellectual property management mechanism is a planned university intellectual property organization, coordination, planning and use of standardized management system. Sound intellectual property management mechanism is the key to the implementation of university intellectual property strategy, and working intellectual property smoothly, also it is a vital part to establish a modem university management system. This article discussed and analyzed about intellectual property rights managements mechanism universities setting the organization, regulations, incentives and policies to protect five aspects of education which combined with domestic and foreign universities intellectual property management practices.

Research on Readjustments of Land Property Rights in Comprehensive land management A Case Study in Project Area of Fan zhen comprehensive land management in Tai＇ anCity

Research purpose： The paper studies readjustments of land property rights which practice in the project area of Fan Zhen comprehensive land management in Tai＇ an City. According to the study make reasonable suggestions, for the similar areas of readjuslments of land property rights provide experience. Research Methods： Investigating method and contrastive analysis method. Results： The right of the project a^ea to an adjustment measures properly, and has achieved good economic benefits, social benefits and ecological benefits. Research Conclusions： Developing the new rural consu＇uction the problem from the social, economic and environmental field, effectively protect the fundamental interests of farmers to get sustainable development.

Analysis on Intellectual Property Management of Construction Enterprises

As the main force of construction enterprises,construction enterprises shoulder the important task of national pillar industries.However,at present,construction enterprises are still labor-intensive enterprises,with low profitability,low overall scientific and technological level,insufficient innovation ability and weak application and protection of intellectual property rights.Based on the current situation of construction enterprises,combined with the author's enterprise,this paper considers the problems existing in the intellectual property management of construction enterprises,and puts forward some countermeasures for the intellectual property management.

Service Model for Multi-Provider IP Service Management

In order to solve the problems associated with Internet IP services management, a generic service model for n multi-providcr IP service management is proposed, which is based on a generalization of the bandwidth broker idea introduced in the differentiated services （DiffServ） environment. This model consists of a hierarchy of service brokers, which makes it fit into providing end-to-end Internet services with QoS support. A simple and sealable mechanism is used to communicate with other cooperative domains to enable customers to dynamically setup services connections over multiple DiffServ domains. The simulation results show that the proposed model is real-time, which can deal with many flow requests in a short period of time, so that it is fit for the service management in a reasonably large network.