Generalized nth-Order Perturbation Method Based on Loop Subdivision Surface Boundary Element Method for Three-Dimensional Broadband Structural Acoustic Uncertainty Analysis

In this paper,a generalized nth-order perturbation method based on the isogeometric boundary element method is proposed for the uncertainty analysis of broadband structural acoustic scattering problems.The Burton-Miller method is employed to solve the problem of non-unique solutions that may be encountered in the external acoustic field,and the nth-order discretization formulation of the boundary integral equation is derived.In addition,the computation of loop subdivision surfaces and the subdivision rules are introduced.In order to confirm the effectiveness of the algorithm,the computed results are contrasted and analyzed with the results under Monte Carlo simulations(MCs)through several numerical examples.

Calculation of all-time apparent resistivity of large loop transient electromagnetic method with very fast simulated annealing

In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.

Feasibility of central loop TEM method for prospecting multilayer water-fi lled goaf

With deep mining of coal mines, prospecting multilayer water-filled goaf has become a new content that results from geophysical exploration in coalfields. The central loop transient electromagnetic （TEM） method is favorable for prospecting conductive layers because of the coupling relationship between its field structure and formation. However, the shielding effect of conductive overburden would not only require a longer observation time when prospecting the same depth but also weaken the anomalous response of underlying layers. Through direct time domain numerical simulation and horizontal layered earth forward modeling, this paper estimates the length of observation time required to prospect the target, and the distinguishable criterion of multilayer water-filled goal is presented with observation error according to the effect of noise on observation data. The observed emf curves from Dazigou Coal Mine, Shanxi Province can distinguish multilayer water-filled goaf. In quantitative inversion interpretation of observed curves, using electric logging data as initial parameters restrains the equivalence caused by coal formation thin layers. The deduced three-layer and two-layer water-filled goals are confirmed by the drilling hole. The result suggests that when observation time is long enough and with the anomalous situation of underlying layers being greater than the observation error, the use of the central loop TEM method to orosoect a multilaver water-filled goaf is feasible.

The Method for Measuring the Loop Resistance and the Temperature Rise Calculation of GIS Conductor Pole

This paper studies the method for measuring the loop resistance of GIS conductor pole based on the super capacitor producing impulse current up to several thousand amperes. This method overcomes the limitations of conventional diagnostic method. Typical GIS conductor poles are chosen. Based on FEA and lab tests, the effect of different forms of current and contact condition, relationship between the temperature of contact and the loop resistance is researched. In full- scale testing under realistic operating conditions on the new 220 kV GIS using prototype instrumentation a very good sensitivity in an early stage was obtained.

Effectiveness of clip-and-snare method using pre-looping technique for gastric endoscopic submucosal dissection

AIM:To evaluate efficacy and safety of clip-and-snare method using pre-looping technique(CSM-PLT)for gastric endoscopic submucosal dissection(ESD).METHODS:In the CSM-PLT method,a clip attached to the lesion side was strangulated with a snare,followed by application of an appropriate tension to the lesion independent of an endoscope.Twenty consecutive lesions were resected by ESD using CSM-PLT(CSM-PLT group)and compared with a control group,including20 lesions that were resected by conventional ESD.The control group was matched based on the size and location of the lesion,presence of pathologic fibrosis,and experience of endoscopists.Total procedure time of ESD,proportion of en bloc resection,and complications were analyzed.RESULTS:The total procedure time for the CSM-PLT group was significantly shorter than that for the control group(38.5 min vs 59.5 min,P=0.023);all lesions were resected en bloc by ESD.There was no significant difference in complications between the two groups.Moreover,there was no complication in the CSM-PLT group.In one large lesion(size:74 mm)that underwentextensive CSM-PLT during ESD,we used an additional CSM-PLT on another edge of the lesion after achieving submucosal resection to the maximum extent possible during initial CSM-PLT.In two lesions,the snare came off the lesion together with the clip after a sudden pull;nevertheless,ESD was successful in all lesions.CONCLUSION:CSM-PLT was an effective and safe method for gastric ESD.

RUMINATE METHOD-SOFTWARE PIPELINING ON NESTED LOOPS

This paper offers a new method to solve the problem of software pipelininsr on nested loops. We first introduce our new software pipelininog method. Ruminate Method, which can optimize program with nested loops. We also outline an algorithm to realize it and introduce the hardware support we designed. The performance of Ruminate Method is analyzed at the end of this paper with the aid of our preliminary experimental result.

Analyzing multi-circular loop scatterers by Maxwellian circuits

Calculating the current distribution in circular loop scatterers commonly involves complicated computation. In this paper, based on the theory of Maxwellian circuits （MC）, we propose a fast algorithm by solving a wave equation with constant parameters corresponding to the circular loop. Our method prodeces similar results compared to the methods using method of moments （MoM） with lower computational complexity. It is effective when there are parallel multiple circular loop scatterers. Experimental results show accuracy of the method.

EFFICIENT COMPUTATIONAL METHOD FOR TRANSIENT EM RESPONSE OF LARGE-LOOP SOURCE OVER LAYERED EARTH

Calculations of the ElectroMagnetic(EM) response produced by a large horizontal loop placed over layered medium are rather complex because its integral expression contains the product of two Bessel functions and has a divergent term. In this paper, an improved fast Hankel and Gaver-Stehfest transforms are introduced to solve the strong-oscillation and slow-decay properties of the integrand, where one Bessel function in the product is substituted by a carefully chosen polynomial of high accuracy and the other used as the digital filter coefficients in the convolution integral. Comparisons prove the validity and the efficiency of the proposed method.

Radiating frequency of three-loop mesoscopic LC circuit with mutual inductance obtained by IEO method

Instead of normally tackling electric circuits by virtue oI the Klrctllaott＇s theorem wnose aim is to uerlvc voxt^gc, electric current, and electric impedence, our aim in this paper is to derive the characteristic frequency of a three-loop mesoscopic LC circuit with three mutual inductances, e.g., for the radiating frequency of the three-loop LC oscillator, we adopt the invariant eigen-operator （lEO） method to realize our aim.

Hopping Parameter Expansion Technique in Noise Method for Disconnected Quark Loops

We investigate the effectiveness of the hopping parameter expansion（HPE） combined with the Z（2） noise method in the calculation of the trace of the inverse of Wilson＇s Dirac operator and some other disconnected contributions.A numerical comparison of the standard deviation for the Z（2） noise method and HPE with the Z（2） noise method is carried out. It is found that there are noise reductions in all the quantities we calculated using the HPE with the Z（2） noise method. For the trace of the inverse of Wilson＇s Dirac operator, the HPE can reduce the statistical error by about 60%.

Three-Dimensional Phase Field Simulations of Hysteresis and Butterfly Loops by the Finite Volume Method

Three-dimensional simulations of ferroelectric hysteresis and butterfly loops are carried out based on solving the time dependent Ginzburg-Landau equations using a finite volume method. The influence of externally mechanical loadings with a tensile strain and a compressive strain on the hysteresis and butterfly loops is studied numerically. Different from the traditional finite element and finite difference methods, the finite volume method is applicable to simulate the ferroelectric phase transitions and properties of ferroelectric materials even for more realistic and physical problems.

Rapid and Visualized Detection Method of Canine Parvovirus Using Loop-Mediated Isothermal Amplification

[Objective] To develop a rapid and visualized detection method using loop-mediated isothermal amplification （LAMP）, improve the detection rate of canine parvovirus （CPV） and reduce the testing cost. [ Method] According to the conserved regions of the VP2 gene of CPV, six primers were designed to amplify the special DNA sequences by LAMP. In addition, the reaction conditions of LAMP were optimized, and the sensitivity, specificity, repeatability and stability were verified. [ Result] The optimal reaction time of the LAMP method for CPVwas 60 min. The products obtained by LAMP had high specificity without cross-reaction with other generic viruses. The sensitivity of the LAMP was 100 times higher than that of PCR. [ Conclusion] The LAMP method for detecting CPV has high practical value. It has many advantages such as high specificity, high sensitivity, simple operation, low cost and rapid analysis, and it does not require special equipment. Therefore, this method is more suitable for the detection of CPV.

Subsystem model-based close-loop grey-box identification method for hydraulic stewart platform

In order to solve the problem of difficult modeling and identification caused by time-variable parameters,multiple inputs and outputs and unstable open loop,a subsystem model-based close-loop grey-box identification method was put forward when consider the main coupling effects of hydraulic Stewart platform.Firstly,the whole system is divided into three TITO(Two Input Two Output) subsystems according to the characteristics of the pseudo-mass matrix,hence transfer function matrix model of the subsystem can also be found.Secondly,since the Stewart platform is unstable,the close-loop transfer model of the subsystem is derived under the proportional controllers.The inverse M serial is adopted as the identification signal to get the experimental data.All parameters of the subsystem are determined in close-loop indirect identification by PEM(Prediction Error Method).Finally,a case study validates the correctness and effectiveness of the subsystem model-based close-loop grey-box identification method for hydraulic Stewart platform.

基于动态磁网络法大型感应电机阻抗参数及起动特性计算

为提高大型感应电机动态阻抗参数及起动特性计算的准确性及计算效率,构建了考虑电机转子转速变化引起气隙磁导变化的非线性动态磁网络模型。以一台6.5 MW大型感应电机为例,分析起动电流变化对电机内各处饱和程度的影响机理,在此基础上,根据磁力线路径及电机内饱和程度确定动态磁网络模型中的非线性磁导的计算方法。将动态磁网络模型与转子趋肤效应模型相结合,提出计及漏磁并考虑转子转速变化及饱和偏移现象的电机动态阻抗参数的计算方法。推导并建立基于转子多回路法的大型感应电机的动态数学模型,根据电机瞬态过程中的电磁耦合关系,确定动态数学模型与磁网络模型的动态耦合求解方法,提出大型电机瞬态过程中考虑电流、转速、饱和及趋肤程度变化的动态阻抗参数及起动特性的计算方法。通过与有限元计算结果及实验结果对比,验证了所提出计算方法的正确性。

计及锁相环非线性特性的跟网型逆变器暂态稳定性分析

锁相环作为跟网型逆变器实现相位同步的关键环节,由于其本身所固有的非线性特性,在弱电网情况下,传统小信号模型可能存在不能准确预测锁相环暂态稳定性的问题。为保证受扰后锁相环的稳定运行,提出了一种基于非线性数学模型的稳定性分析方法。首先,根据锁相环工作原理,建立其二阶非线性微分方程,通过相平面法对锁相环输出特性进行定性分析,评估不同参数对锁相环暂态特性的影响;然后,基于等面积法则分析锁相环暂态失稳机理,鉴于传统等面积法则可能导致稳定性的误判,采用非线性动力学多尺度法对锁相环受扰后的暂态时域表达式进行求解,明确锁相环暂态稳定边界;最后,通过Matlab仿真和RT⁃LAB半实物平台验证了所得解析解和锁相环暂态稳定域的准确性,为弱电网条件下锁相环控制参数及电路参数选取提供一定参考。

基于多导体回路法的AT供电方式长回路电容计算方法研究

提出了一种基于多导体回路法以接触网和正馈线为传输导体的电气化铁路AT供电方式牵引网长回路电容计算方法。该方法以与电荷唯一对应的回路为基本单元,对复杂多导体传输线系统开展电场描述,实现了AT供电方式牵引网长回路电容的精确计算。

系统动力学反馈环快速计算法研究

针对系统动力学传统枝向量行列式反馈环计算法存在计算时花费时间过长、计算结果容易出错且难以检验等问题,提出了系统动力学反馈环快速计算法。该方法借助Vensim软件Loops功能,以各流位变量为起点生成系统反馈回路集,再删除重复反馈环,可得到此系统所有非重复反馈环集合。以萍乡明鑫农场“基地+农户”供应链复杂系统为例,借助已构建的11棵强简化流率基本入树模型,分别用行列式计算法和该方法计算得出该系统所有反馈环。研究表明,两种方法最终计算结果相同,但反馈环快速计算法却能大大节省计算时间,并提高计算准确率。并可基于此深入分析系统结构,以期提出相对应的管理对策。

基于区段的地下空间环路通风排烟设计方法

为实现多匝道、多地块、内部空间复杂的地下空间环路烟气控制,提出一种区段式排烟方法:将地下空间环路与地块通过防火门分隔,形成独立的构筑物,结合隧道结构,确定风机房位置,划分区段,使烟气在一定区域内排出。以滨江地下环路为例,在隧道主线上均匀布置6个排烟风机房,并以此为节点,将隧道划分为8个区段。当火灾发生时,开启所在区段两端的风机进行排烟。由于各区段不设置固定分隔,整个风道是贯通的,因而各个风机房里的风机可互相作为备用排烟风机,以降低成本。采用数值模拟软件建立模型,对排烟口开启数量和间距进行模拟,确定排烟量为90 m^(3)/s、排烟口间距为30 m、开启8个排烟口的排烟方案。从人员疏散环境以及排烟效率对典型区段进行分析,结果表明:烟气控制在一定的范围内,人员疏散环境安全,排烟效率达到90%,证明方案合理可行。

高低频复合励磁磁心损耗量化的研究

针对高低频复合励磁磁元件磁心损耗难以精确测量和建模的问题,在详细分析现有磁心损耗测量方法和磁心损耗模型局限性的基础上,根据直流功率法测量原理搭建高低频复合励磁磁心损耗测量系统,利用损耗能精确测量的空心电感验证其测量精度。最后,基于直流偏置下脉宽调制(pulse width modulation,PWM)波励磁的磁心损耗模型,提出高低频复合励磁磁性元件的磁心损耗预测模型,并实验验证预测模型最大相对误差为-8.83%,具有较高的精度。

机织钩面粘扣带表面质量的机器视觉检测方法

针对机织钩面粘扣带表面质量人工检测中存在的精度低等问题,提出了基于机器视觉的机织钩面粘扣带表面质量检测方法。通过单目视觉的切向成像获得粘扣带表面的单行图像,避免了粘扣带相邻行之间的干扰。对单行粘扣带图像进行预处理后,采用投影法对其进行水平投影和垂直投影,提取粘扣带表面单行图像中的每个钩扣状区域,基于连通域统计法判别钩扣状区域的切割状态,计算其切开率,通过统计数据表征粘扣带表面质量。实验结果表明,该方法对机织钩面粘扣带表面质量的检测相对误差为1%,具有较高的稳定性。