Efficient Route Planning for Real-Time Demand-Responsive Transit

Demand Responsive Transit (DRT) responds to the dynamic users’ requests without any fixed routes and timetablesand determines the stop and the start according to the demands. This study explores the optimization of dynamicvehicle scheduling and real-time route planning in urban public transportation systems, with a focus on busservices. It addresses the limitations of current shared mobility routing algorithms, which are primarily designedfor simpler, single origin/destination scenarios, and do not meet the complex demands of bus transit systems. Theresearch introduces an route planning algorithm designed to dynamically accommodate passenger travel needsand enable real-time route modifications. Unlike traditional methods, this algorithm leverages a queue-based,multi-objective heuristic A∗ approach, offering a solution to the inflexibility and limited coverage of suburbanbus routes. Also, this study conducts a comparative analysis of the proposed algorithm with solutions based onGenetic Algorithm (GA) and Ant Colony Optimization Algorithm (ACO), focusing on calculation time, routelength, passenger waiting time, boarding time, and detour rate. The findings demonstrate that the proposedalgorithmsignificantly enhances route planning speed, achieving an 80–100-fold increase in efficiency over existingmodels, thereby supporting the real-time demands of Demand-Responsive Transportation (DRT) systems. Thestudy concludes that this algorithm not only optimizes route planning in bus transit but also presents a scalablesolution for improving urban mobility.

An efficient QoS routing algorithm for multi-constrained path selection

An efficient QoS routing algorithm was proposed for multiple constrained path selection. Making use of efficient pruning policy, the algorithm reduces greatly the size of search space and the computing time. Although the proposed algorithm has exponential time complexity in the worst case, it can get the running results quickly in practical application. When the scale of network increases, the algorithm can efficiently control the size of search space by constraint conditions and prior queue. The results of simulation show that successful request ratio ( r ) of efficient algorithm for multi-constrained optimal path (EAMCOP) is better than that of heuristic algorithm for multi-constrained optimal path (H-MCOP), but average computing time ( t ) of EAMCOP is far less than that of H-MCOP. And it can be seen that the computing time of EAMCOP is only one fourth of that of H-MCOP in Advanced Research Projects Agency Network (ARPANet) topology.

Novel multi-path routing scheme for UWB Ad hoc network

The routing protocols play an important role for ad hoc networks performance.As some problems with DSR,SMR,and AMR protocols were analyzed,a new routing protocol suitable for UWB Ad hoc networks was proposed in this paper.The new routing protocol utilize an act of orientation of UWB and tries to get sufficient route information and decrease the network load caused by route discovery at the same time.Simulation results show that the routing load of the new protocol is lower and throughput is higher than that of DSR.While the node’s mobility increases,these advantages become more obvious.

MRBCH: A Multi-Path Routing Protocol Based on Credible Cluster Heads for Wireless Sensor Networks

Wireless sensor networks are widely used for its flexibility, but they also suffer from problems like limited capacity, large node number and vulnerability to security threats. In this paper, we propose a multi-path routing protocol based on the credible cluster heads. The protocol chooses nodes with more energy remained as cluster heads at the cluster head choosing phase, and then authenticates them by the neighbor cluster heads. Using trust mechanisms it creates the credit value, and based on the credit value the multi-path cluster head routing can finally be found. The credit value is created and exchanged among the cluster heads only. Theoretical analysis combined with simulation results demonstrate that this protocol can save the resource, prolong the lifetime, and ensure the security and performance of the network.

Multi-Path Routing and Resource Allocation in Active Network

An algorithm of traffic distribution called active multi-path routing (AMR)in active network is proposed. AMR adopts multi-path routing and applies nonlinear optimizeapproximate method to distribute network traffic among multiple paths. It is combined to bandwidthresource allocation and the congestion restraint mechanism to avoid congestion happening and worsen.So network performance can be improved greatly. The frame of AMR includes adaptive trafficallocation model, the conception of supply bandwidth and its' allocation model, the principle ofcongestion restraint and its' model, and the implement of AMR based on multi-agents system in activenetwork. Through simulations, AMR has distinct effects on network performance. The results show AMRisa valid traffic regulation algorithm.

Dynamic Routing and Wavelength Assignment for Multi-Lightpath Demands

In wavelength division multiplexing (WDM) networks without wavelengthconversion functionality, we convert the dynamic routing and wavelength assignment problem formulti-lightpath demands to the edge-disjoint paths problem, and propose a new algorithm. Thecomputer simulations show that the proposed algorithm has better blocking probability performancethan a sequential algorithm, which first separates a multi-lightpath demand into mutilplesingle-lightpath demands, then uses the fixed-alternate routing-first fit wavelength assignment(AR-FF) algorithm for each single-lightpath demand.

SOPA:Source Routing Based Packet-Level Multi-Path Routing in Data Center Networks

Many ＂rich - connected＂ topologies with multiple parallel paths between smwers have been proposed for data center networks recently to provide high bisection bandwidth, but it re mains challenging to fully utilize the high network capacity by appropriate multi- path routing algorithms. As flow-level path splitting may lead to trafl＇ic imbalance between paths due to flow- size difference, packet-level path splitting attracts more attention lately, which spreads packets from flows into multiple available paths and significantly improves link utilizations. However, it may cause packet reordering, confusing the TCP congestion control algorithm and lowering the throughput of flows. In this paper, we design a novel packetlevel multi-path routing scheme called SOPA, which leverag- es OpenFlow to perform packet-level path splitting in a round- robin fashion, and hence significantly mitigates the packet reordering problem and improves the network throughput. Moreover, SOPA leverages the topological feature of data center networks to encode a very small number of switches along the path into the packet header, resulting in very light overhead. Compared with random packet spraying （RPS）, Hedera and equal-cost multi-path routing （ECMP）, our simulations demonstrate that SOPA achieves 29.87%, 50.41% and 77.74% higher network throughput respectively under permutation workload, and reduces average data transfer completion time by 53.65%, 343.31% and 348.25% respectively under production workload.

Mouse-Sensitive Following Path Suggestion for Drawing Travel Routes in Web Map Systems

This paper proposes a web map system for drawing an arbitrary travel route using a mouse-sensitive following path suggestion. The interaction model of the system allows users to intuitively understand the sequence of user actions needed to draw a conceived route and reduces the number of user actions required. Moreover, the system allows users to understand at a glance several drawing alternatives (static suggestion) and also consider a particular drawing alternative (dynamic suggestion) without making any commitment. The proposed architecture of the system reduces the influence caused by communication delay between a map server and a web client by delivering in advance road network data from a map server to a web client. Experimental evaluations on a prototype we developed demonstrated that the proposed system enables users to draw arbitrary routes within noticeably less clicks, in less time, and with less stress than previous systems.

Secure Path Cycle Selection Method Using Fuzzy Logic System for Improving Energy Efficiency in Statistical En-Route Filtering Based WSNs

Sensor nodes are easily compromised to malicious attackers due to an open environment. A false injected attack which takes place on application layer is elected by the compromised node. If the false report arrives in a base station, a false alarm is occurred, and the energy of the nodes is consumed. To detect the false report, statistical en-route filtering method is proposed. In this paper, we proposed the secure path cycle selection method using fuzzy rule-based system to consume effective energy. The method makes balanced energy consumption of each node. Moreover, the lifetime of the whole network will be increased. The base station determines the path cycle using the fuzzy rule-based system. The performance of the proposed method is demonstrated using simulation studies with the three methods.

DRB:HAWAII中基于Default Route的路径更新算法

HAW II是IP网络中的一种微移动协议.随着节点在域内不断移动,HAW II需要不断变更移动节点到域网关的路径.针对HAW II的特点,本文提出了一种基于D efau lt R ou te的路径更新算法DRB,该算法在充分考虑各种网络环境的基础上,将defau lt rou te用于HAW II的路径更新过程.模拟结果和相关计算表明,该算法在保持与原有算法相近性能的条件下,具有更大的灵活性,并有效降低了路由表的开销.

Three-Dimensional Planning of Arrival and Departure Route Network Based on Improved Ant-Colony Algorithm

In order to improve safety,economy efficiency and design automation degree of air route in terminal airspace,Three-dimensional(3D)planning of routes network is investigated.A waypoint probability search method is proposed to optimize individual flight path.Through updating horizontal pheromones by negative feedback factors,an antcolony algorithm of path searching in 3Dterminal airspace is implemented.The principle of optimization sequence of arrival and departure routes is analyzed.Each route is optimized successively,and the overall optimization of the whole route network is finally achieved.A case study shows that it takes about 63 sto optimize 8arrival and departure routes,and the operation efficiency can be significantly improved with desirable safety and economy.

Genetic algorithm for pareto optimum-based route selection

A quality of service （QoS） or constraint-based routing selection needs to find a path subject to multiple constraints through a network. The problem of finding such a path is known as the multi-constrained path （MCP） problem, and has been proven to be NP-complete that cannot be exactly solved in a polynomial time. The NPC problem is converted into a multiobjective optimization problem with constraints to be solved with a genetic algorithm. Based on the Pareto optimum, a constrained routing computation method is proposed to generate a set of nondominated optimal routes with the genetic algorithm mechanism. The convergence and time complexity of the novel algorithm is analyzed. Experimental results show that multiobjective evolution is highly responsive and competent for the Pareto optimum-based route selection. When this method is applied to a MPLS and metropolitan-area network, it will be capable of optimizing the transmission performance.

Route optimization model for pedestrian evacuation in metro hubs

The route optimization problem for road networks was applied to pedestrian flow.Evacuation path networks with nodes and arcs considering the traffic capacities of facilities were built in metro hubs,and a path impedance function for metro hubs which used the relationships among circulation speed,density and flow rate for pedestrians was defined.Then,a route optimization model which minimizes the movement time of the last evacuee was constructed to optimize evacuation performance.Solutions to the proposed mathematical model were obtained through an iterative optimization process.The route optimization model was applied to Xidan Station of Beijing Metro Line 4 based on the actual situations,and the calculation results of the model were tested using buildingExodus microscopic evacuation simulation software.The simulation result shows that the proposed model shortens the evacuation time by 16.05%,3.15% and 2.78% compared with all or none method,equally split method and Logit model,respectively.Furthermore,when the population gets larger,evacuation efficiency in the proposed model has a greater advantage.

Generalized minimum information path routing strategy on scale-free networks

This paper presents a new routing strategy by introducing a tunable parameter into the minimum information path routing strategy we proposed previously. It is found that network transmission capacity can be considerably enhanced by adjusting the parameter with various allocations of node capability for packet delivery. Moreover, the proposed routing strategy provides a traffic load distribution which can better match the allocation of node capability than that of traditional efficient routing strategies, leading to a network with improved transmission performance. This routing strategy, without deviating from the shortest-path routing strategy in the length of paths too much, produces improved performance indexes such as critical generating rate, average length of paths and average search information.

Multi-ACO Application in Routing and Scheduling Optimization of Maintenance Fleet (RSOMF) Based on Conditions for Offshore Wind Farms

Reducing the operation and maintenance (O & M) cost is one of the potential actions that could reduce the cost of energy produced by offshore wind farms. This article attempts to reduce O & M cost by improving the utilization of the maintenance resources, specifically the efficient scheduling and routing of the maintenance fleet. Scheduling and routing of maintenance fleet is a non-linear optimization problem with high complexity and a number of constraints. A heuristic algorithm, Ant Colony Optimization (ACO), was modified as Multi-ACO to be used to find the optimal scheduling and routing of maintenance fleet. The numerical studies showed that the proposed methodology was effective and robust enough to find the optimal solution even if the number of offshore wind turbine increases. The suggested approaches are helpful to avoid a time-consuming process of manually planning the scheduling and routing with a presumably suboptimal outcome.

Link-Vertex Topology Aggregation for Multi-domain Path Computation with Hierarchical PCE Architecture

Inter-domain path computing is one big issue in multi-domain networks. The Hierarchical Path Computing Element (H-PCE) is a semi-central architecture for computing inter-domain path. To facilitate H-PCE in inter-domain path computing, this paper proposed a topology aggregation scheme to abstract the edge nodes and their connected inter-domain link as one vertex to achieve more optimal paths and confidentiality guarantee. The effectiveness of the scheme has been demonstrated on solving wavelength routing in multi-domain Wavelength Division Multiplexing (WDM) network via simulation. Simulation results show that this scheme reduces at least 10% inter-domain blocking probability, compared with the traditional Domain-to-the-Node (DtN) scheme.

Application of Improved Artificial Bee Colony Algorithm in Urban Vegetable Distribution Route Optimization

According to the characteristics and requirements of urban vegetable logistics and distribution, the optimization model is established to achieve the minimum distribution cost of distribution center. The algorithm of artificial bee colony is improved, and the algorithm based on MATLAB software is designed to solve the model successfully. At the same time, combined with the actual case, the two algorithms are compared to verify the effectiveness of the improved artificial bee colony algorithm in the optimization of urban vegetable distribution path.

Reliable Braided Multipath Routing with Network Coding for Underwater Sensor Networks

Owing to the long propagation delay and high error rate of acoustic channels, it is very challenging to provide reliable data transfer for underwater sensor networks. Moreover, network coding is proved to be an effective coding technique for throughput and robustness of networks. In this paper, we propose a Reliable Braided Multipath Routing with Network Coding for underwater sensor networks （RBMR-NC）. Disjoint multi-path algorithm is used to build independent actual paths, as called main paths. Some braided paths on each main path are built according to the braided multi-path algorithm, which are called logic paths. When a data packet is transmitted by these nodes, the nodes can employ network coding to encode packets coming from the same group in order to further reduce relativity among these packets, and enhance the probability of successful decoding at the sink node. Braided multi-path can make the main paths to be multiplexed to reduce the probability of long paths. This paper mainly employs successful delivery rate to evaluate RBMR-NC model with theoretical analysis and simulation methods. The results indicate that the proposed RBMR-NC protocol is valuable to enhance network reliability and to reduce system redundancy.

Shortest Path Routing Algorithm Based on Chaotic Neural Network

A shortest path routing algorithm based on transient chaotic neural network is proposed in this paper. Gam-pared with previous models adopting Hopfield neural network, this algorithm has a higher ability to overcome the local minimum, and achieves a better performance. By introducing a special post-processing technique for the output matrixes, our algorithm can obtain an optimal solution with a high probability even for the paths that need more hops in large-size networks.

Algorithm for multi-constrained path selection based on experimental analysis

It is a challenging problem to provide quality-of-service （QoS） guarantees in next generation high-speed network, and the QoS routing is one of the key issues of the problem. For the problem of multi-constrained QoS routing in high-speed network, especially under the inaccurate link state information, the success ratio of the different constraint combination is analyzed statistically, and a constraint analysis method based on the computer simulation is proposed. Furthermore, the approximately equal loose-tight order relation between each two constraints is constructed, and then an algorithm based on the experimental analysis is presented. Finally, the simulation result demonstrates that the algorithm has the higher success ratio, and the theoretical analysis proves its correctness and universality.