This paper mainly presents a PM multi-DOF actuator for robot in-wheels drive applications and its control method. The torque model is established based on the finite-element model of the single pair poles in 3D finite...This paper mainly presents a PM multi-DOF actuator for robot in-wheels drive applications and its control method. The torque model is established based on the finite-element model of the single pair poles in 3D finite element method software. Due to the special structure of the actuator,the Euler angles are adopted for deriving the kinematics and dynamic model. To reduce the effects of uncertainties of modeling error,nonlinear friction and external disturbances in the system,an approximation of neural network adaptive control method is applied to the actuator. The computation and simulation results show that the proposed analysis and control method can effectively derive the characteristics and improve the motion performance,which provides the primary theoretical guide for the configuration design,optimization and control research of multi-DOF deflection type actuators.展开更多
Conventional manipulators with rigid structures and sti ness actuators have poor flexibility,limited obstacle avoidance capability,and constrained workspace.Some developed flexible or soft manipulators in recent years...Conventional manipulators with rigid structures and sti ness actuators have poor flexibility,limited obstacle avoidance capability,and constrained workspace.Some developed flexible or soft manipulators in recent years have the characteristics of infinite degrees of freedom,high flexibility,environmental adaptability,and extended manipulation capability.However,these existing manipulators still cannot achieve the shrinking motion and independent control of specified segments like the animals,which hinders their applications.In this paper,a flexible bio-tensegrity manipulator,inspired by the longitudinal and transversal muscles of octopus tentacles,was proposed to mimic the shrinking behavior and achieve the variable motion patterns of each segment.Such proposed manipulator uses the elastic spring as the backbone,which is driven by four cables and has one variable structure mechanism in each segment to achieve the independent control of each segment.The variable structure mechanism innovatively contains seven lock-release states to independently control the bending and shrinking motion of each segment.After the kinematic modeling and analysis,one prototype of such bionic flexible manipulator was built and the open-loop control method was proposed.Some proof-of-concept experiments,including the shrinking motion,bending motion,and variable structure motion,were carried out by controlling the length of four cables and changing the lock-release states of the variable structure mechanism,which validate the feasibility and validity of our proposed prototype.Meanwhile,the experimental results show the flexible manipulator can accomplish the bending and shrinking motion with the relative error less than 6.8%through the simple independent control of each segment using the variable structure mechanism.This proposed manipulator has the features of controllable degree-of-freedom in each segment,which extend their environmental adaptability,and manipulation capability.展开更多
基金Sponsored by the National Natural Science Foundation of China(Grant No.51107031,50677013)the Natural Science Foundation of Hebei Province of China(Grant No.E2009000703)
文摘This paper mainly presents a PM multi-DOF actuator for robot in-wheels drive applications and its control method. The torque model is established based on the finite-element model of the single pair poles in 3D finite element method software. Due to the special structure of the actuator,the Euler angles are adopted for deriving the kinematics and dynamic model. To reduce the effects of uncertainties of modeling error,nonlinear friction and external disturbances in the system,an approximation of neural network adaptive control method is applied to the actuator. The computation and simulation results show that the proposed analysis and control method can effectively derive the characteristics and improve the motion performance,which provides the primary theoretical guide for the configuration design,optimization and control research of multi-DOF deflection type actuators.
基金Supported by National Natural Science Foundation of China(Grant Nos.51705066,51805128)Sichuan Science and Technology Program(Grant No.2019YFG0343)Fundamental Research Funds for the Central Universities of China(Grant Nos.ZYGX2019J041,ZYGX2016KYQD137).
文摘Conventional manipulators with rigid structures and sti ness actuators have poor flexibility,limited obstacle avoidance capability,and constrained workspace.Some developed flexible or soft manipulators in recent years have the characteristics of infinite degrees of freedom,high flexibility,environmental adaptability,and extended manipulation capability.However,these existing manipulators still cannot achieve the shrinking motion and independent control of specified segments like the animals,which hinders their applications.In this paper,a flexible bio-tensegrity manipulator,inspired by the longitudinal and transversal muscles of octopus tentacles,was proposed to mimic the shrinking behavior and achieve the variable motion patterns of each segment.Such proposed manipulator uses the elastic spring as the backbone,which is driven by four cables and has one variable structure mechanism in each segment to achieve the independent control of each segment.The variable structure mechanism innovatively contains seven lock-release states to independently control the bending and shrinking motion of each segment.After the kinematic modeling and analysis,one prototype of such bionic flexible manipulator was built and the open-loop control method was proposed.Some proof-of-concept experiments,including the shrinking motion,bending motion,and variable structure motion,were carried out by controlling the length of four cables and changing the lock-release states of the variable structure mechanism,which validate the feasibility and validity of our proposed prototype.Meanwhile,the experimental results show the flexible manipulator can accomplish the bending and shrinking motion with the relative error less than 6.8%through the simple independent control of each segment using the variable structure mechanism.This proposed manipulator has the features of controllable degree-of-freedom in each segment,which extend their environmental adaptability,and manipulation capability.
