Coherent change detection of fine traces based on multi-angle SAR observations

Coherent change detection(CCD) is an effective method to detect subtle scene changes that occur between temporal synthetic aperture radar(SAR) observations. Most coherence estimators are obtained from a Hermitian product based on local statistics. Increasing the number of samples in the local window can improve the estimation bias, but cause the loss of the estimated images spatial resolution. The limitations of these estimators lead to unclear contour of the disturbed region, and even the omission of fine change targets. In this paper, a CCD approach is proposed to detect fine scene changes from multi-temporal and multi-angle SAR image pairs. Multi-angle CCD estimator can improve the contrast between the change target and the background clutter by jointly accumulating singleangle alternative estimator results without further loss of image resolution. The sensitivity of detection performance to image quantity and angle interval is analyzed. Theoretical analysis and experimental results verify the performance of the proposed algorithm.

Determination of rice panicle numbers during heading by multi-angle imaging

Plant phenomics has the potential to accelerate progress in understanding gene functions and environmental responses. Progress has been made in automating high-throughput plant phenotyping. However, few studies have investigated automated rice panicle counting. This paper describes a novel method for automatically and nonintrusively determining rice panicle numbers during the full heading stage by analyzing color images of rice plants taken from multiple angles. Pot-grown rice plants were transferred via an industrial conveyer to an imaging chamber. Color images from different angles were automatically acquired as a turntable rotated the plant. The images were then analyzed and the panicle number of each plant was determined. The image analysis pipeline consisted of extracting the i2 plane from the original color image, segmenting the image, discriminating the panicles from the rest of the plant using an artificial neural network, and calculating the panicle number in the current image. The panicle number of the plant was taken as the maximum of the panicle numbers extracted from all 12 multi-angle images. A total of 105 rice plants during the full heading stage were examined to test the performance of the method. The mean absolute error of the manual and automatic count was 0.5, with 95.3% of the plants yielding absolute errors within ± 1. The method will be useful for evaluating rice panicles and will serve as an important supplementary method for high-throughput rice phenotyping.

An approach to wide-field imaging of linear rail ground-based SAR in high squint multi-angle mode

Ground-based synthetic aperture radar(GB-SAR) has been successfully applied to the ground deformation monitoring.However, due to the short length of the GB-SAR platform, the scope of observation is largely limited. The practical applications drive us to make improvements on the conventional linear rail GB-SAR system in order to achieve larger field imaging. First, a turntable is utilized to support the rotational movement of the radar.Next, a series of high-squint scanning is performed with multiple squint angles. Further, the high squint modulation phase of the echo data is eliminated. Then, a new multi-angle imaging method is performed in the wave number domain to expand the field of view. Simulation and real experiments verify the effectiveness of this method.

Numerical Simulation of Liquid-Solid Coupling in Multi-Angle Fractures in Pressure-Sensitive Reservoirs

This study clarifies the seepage characteristics of complex fractured pressure-sensitive reservoirs,and addresses a common technological problem,that is the alteration of the permeability degree of the reservoir bed(known to be responsible for changes in the direction and velocity of fluid flows between wells).On the basis of a new pressuresensitive equation that considers the fracture directional pressure-sensitive effect,an oil-gas-water three-phase seepage mathematical model is introduced,which can be applied to pressure-sensitive,full-tensor permeability,ultralow-permeability reservoirs with fracture-induced anisotropy.Accordingly,numerical simulations are conducted to explore the seepage laws for ultralow-permeability reservoirs.The results show that element patterns have the highest recovery percentage under a fracture angle of 45°.Accounting for the pressure-sensitive effect produces a decrease in the recovery percentage.Several patterns are considered:inverted five-seven-and nine-spot patterns and a cross-row well pattern.Finally,two strategies are introduced to counteract the rotation of the direction of the principal permeability due to the fracture directional pressure-sensitive effect.

Genetic inverse algorithm for retrieval of component temperature of mixed pixel by multi-angle thermal infrared remote sensing data

After carefully studying the results of retrieval of land surface temperature(LST) by multi-channel thermal infrared remote sensing data, the authors of this paper point out that its accuracy and significance for applications are seriously damaged by the high correlation coefficient among multi-channel information and its disablement of direct retrieval of component temperature. Based on the model of directional radiation of non-isothermal mixed pixel, the authors point out that multi-angle thermal infrared remote sensing can offer the possibility to directly retrieve component temperature, but it is also a multi-parameter synchronous inverse problem. The results of digital simulation and field experiments show that the genetic inverse algorithm (GIA) is an effective method to fulfill multi-parameter synchronous retrieval. So it is possible to realize retrieval of component temperature with error less than 1K by multi-angle thermal infrared remote sensing data and GIA.

On MSDT inversion with multi-angle remote sensing data

With the wavelet transform, image of multi-angle remote sensing is decomposed into multi-resolution. With data of each resolution, we try target-based multi-stages inversion, taking the inversion result of coarse resolution as the prior information of the next inversion. The result gets finer and finer until the resolution of satellite observation. In this way, the target-based multi-stages inversion can be used in remote sensing inversion of large-scaled coverage. With MISR data, we inverse structure parameters of vegetation in semiarid grassland of the Inner Mongolia Autonomous Region. The result proves that this way is efficient.

Research and application of multi-angle polarization characteristics of water body mirror reflection

On the basis of the multi-angle polarized reflection spectrum of the water samples,the water body mirror reflection polarization characteristics and mechanism are described systematically. By altering such influential factors as the angle of incidence,detecting angle,detecting azimuth angle and polari-zation angle,ubiquitous laws for the multi-angle polarized reflection spectrum of the water samples are obtained. Combining multi-angle remote sensing with polarized light,the multi-angle polarized reflec-tion method about eliminating the water body mirror reflection and the suitable time of the polarized remote sensing of the water body are proposed. This study provides technical references for the ap-plication of multi-angle polarization technology on water body remote sensing.

Multi-angle Face Detection Based on DP-Adaboost

Although important progresses have been already made in face detection,many false faces can be found in detection results and false detection rate is influenced by some factors,such as rotation and tilt of human face,complicated background,illumination,scale,cloak and hairstyle.This paper proposes a new method called DP-Adaboost algorithm to detect multi-angle human face and improve the correct detection rate.An improved Adaboost algorithm with the fusion of frontal face classifier and a profile face classifier is used to detect the multi-angle face.An improved horizontal differential projection algorithm is put forward to remove those non-face images among the preliminary detection results from the improved Adaboost algorithm.Experiment results show that compared with the classical Adaboost algorithm with a frontal face classifier,the textual DP-Adaboost algorithm can reduce false rate significantly and improve hit rate in multi-angle face detection.

A Multi-Angled Understanding of High-Quality Development

At present,the Chinese economy has already begun shifting from its previous stage of rapid growth to a new stage of high-quality development. I.The inevitability of the shift toward high-quality development 1.The shift toward high-quality development is an objective re- quirement as Chinas economy enters a new era,along with the advance of Chinese socialism.

Cloud Top Pressure Retrieval Using Polarized and Oxygen A-band Measurements from GF5 and PARASOL Satellites

Cloud top pressure(CTP)is one of the critical cloud properties that significantly affects the radiative effect of clouds.Multi-angle polarized sensors can employ polarized bands(490 nm)or O_(2)A-bands(763 and 765 nm)to retrieve the CTP.However,the CTP retrieved by the two methods shows inconsistent results in certain cases,and large uncertainties in low and thin cloud retrievals,which may lead to challenges in subsequent applications.This study proposes a synergistic algorithm that considers both O_(2)A-bands and polarized bands using a random forest(RF)model.LiDAR CTP data are used as the true values and the polarized and non-polarized measurements are concatenated to train the RF model to determine CTP.Additionally,through analysis,we proposed that the polarized signal becomes saturated as the cloud optical thickness(COT)increases,necessitating a particular treatment for cases where COT<10 to improve the algorithm's stability.The synergistic method was then applied to the directional polarized camera(DPC)and Polarized and Directionality of the Earth’s Reflectance(POLDER)measurements for evaluation,and the resulting retrieval accuracy of the POLDER-based measurements(RMSEPOLDER=205.176 hPa,RMSEDPC=171.141 hPa,R^(2)POLDER=0.636,R^(2)DPC=0.663,respectively)were higher than that of the MODIS and POLDER Rayleigh pressure measurements.The synergistic algorithm also showed good performance with the application of DPC data.This algorithm is expected to provide data support for atmosphere-related fields as an atmospheric remote sensing algorithm within the Cloud Application for Remote Sensing,Atmospheric Radiation,and Updating Energy(CARE)platform.

Research on Feature Extraction and Classification Method of Vibration Signal of Escalator Sprocket Bearing

In order to improve the accuracy of escalator sprocket bearing fault diagnosis,the problem of the feature extraction method of bearing vibration signal is addressed.In this paper,empirical mode is used to decompose the original signal,and the optimal modal component among the multiple modal components is obtained after the optimization decomposition is selected by the envelope spectrum method,and the multi-angle feature measure is introduced to extract the fault characteristic value.According to the vibration characteristics of the bearing vibration signal data,a bearing signal feature group that is more inclined to the fault feature category information is established,which avoids the absolute problem of extracting a single metric feature.The fuzzy C-means clustering algorithm is used to cluster the sample data with similar characteristics into the same cluster area,which effectively solves the problem that a single measurement analysis cannot characterize the complex internal characteristics ofthe bearing vibration signal.

Spatio-temporal Characteristics of Area Coverage and Observation Geometry of the MISR Land-surface BRF Product: A Case Study of the Central Part of Northeast Asia

The Multi-angle imaging spectroradiometer(MISR) land-surface(LS) bidirectional reflectance factor(BRF) product(MILS_BRF) has unique semi-simultaneous multi-angle sampling and global coverage. However, unlike on-satellite observations, the spatio-temporal characteristics of MILS_BRF data have rarely been explicitly and comprehensively analysed. Results from 5-yr(2011–2015) of MILS_BRF dataset from a typical region in central Northeast Asia as the study area showed that the monthly area coverage as well as MILS_BRF data quantity varies significantly, from the highest in October(99.05%) through median in June/July(78.09%/75.21%) to lowest in January(18.97%), and a large data-vacant area exists in the study area during four consecutive winter months(December through March). The data-vacant area is mainly composed of crop lands and cropland/natural vegetation mosaic. The amount of data within the principal plane(PP)±30°(nPP) or cross PP ±30°(nCP), varies intra-annually with significant differences from different view zeniths or forward/backward scattering directions. For example, multiple off-nadir cameras have nPP but no nCP data for up to six months(September through February), with the opposite occurring in June and July. This study provides explicit and comprehensive information about the spatio-temporal characteristics of product coverage and observation geometry of MILS_BRF in the study area. Results provide required user reference information for MILS_BRF to evaluate performance of BRDF models or to compare with other satellite-derived BRF or albedo products. Comparing this final product to on-satellite observations, what was found here reveals a new perspective on product spatial coverage and observation geometry for multi-angle remote sensing.

Multi-Directional Reconstruction Algorithm for Panoramic Camera

A panorama can reflect the surrounding scenery because it is an image with a wide angle of view.It can be applied in virtual reality,smart homes and other fields as well.A multi-directional reconstruction algorithm for panoramic camera is proposed in this paper according to the imaging principle of dome camera,as the distortion inevitably exists in the captured panorama.First,parameters of a panoramic image are calculated.Then,a weighting operator with location information is introduced to solve the problem of rough edges by taking full advantage of pixels.Six directions of the mapping model are built,which include up,down,left,right,front and back,according to the correspondence between cylinder and spherical coordinates.Finally,multi-directional image reconstruction can be realized.Various experiments are performed in panoramas(1024×1024)with 30 different shooting scenes.Results show that the azimuth image can be reconstructed quickly and accurately.The fuzzy edge can be alleviated effectively.The rate of pixel utilization can reach 84%,and it is 33%higher than the direct mapping algorithm.Large scale distortion is also further studied.

Automatic Liver Tumor Segmentation in CT Modalities Using MAT-ACM

In the recent days, the segmentation of Liver Tumor (LT) has beendemanding and challenging. The process of segmenting the liver and accuratelyspotting the tumor is demanding due to the diversity of shape, texture, and intensity of the liver image. The intensity similarities of the neighboring organs of theliver create difficulties during liver segmentation. The manual segmentation doesnot provide an accurate segmentation because the results provided by differentmedical experts can vary. Also, this manual technique requires a large numberof image slices and time for segmentation. To solve these issues, the Fully Automatic Segmentation (FAS) technique is proposed. In this proposed Multi-AngleTexture Active Contour Model (MAT-ACM) method, the input Computed Tomography (CT) image is preprocessed by Contrast Enhancement (CE) with Non-Linear Mapping Technique (NLMT), in which the liver is differentiated from itsneighbouring soft tissues with related strength. Then, the filtered images are givenas the input to Adaptive Edge Modeling (AEM) with Canny Edge Detection(CED) technique, which segments the Liver Region (LR) from the given CTimages. An AEM with a CED model is implemented, which increases the convergence speed of the iterative process for decreasing the Volumetric Overlap Error(VOE) is 6.92% rates when compared with the traditional Segmentation Techniques (ST). Finally, the Liver Tumor Segmentation (LTS) is developed by applyingthe MAT-ACM, which accurately segments the LR from the segmented LRs. Theevaluation of the proposed method is compared with the existing LTS methodsusing various performance measures to prove the superiority of the proposedMAT-ACM method.

Inversion of the asymmetry factor for desert areas of China

Deserts,which have high surface albedo and wide area,are important components of the earth system.It is very important for the research of surface radiation and energy balance to understand the anisotropic scattering of desert areas.The emergence and development of multi-angle remote sensing made possible the inversion of the anisotropic scattering of desert areas at the regional or global scale.Firstly,this paper explored the accuracy of the inversion of asymmetry factor using the Hapke model and the simulated single-and multi-phase MISR data.Based on the results,the asymmetry factor of representative surface of desert areas in northwestern China was retrieved.The values of the asymmetry factor retrieved from MISR data were compared with the values retrieved from the laboratory data.The results showed that the single-phase MISR data could be used for the inversion of asymmetry parameter of desert areas.The sign of the asymmetry parameter for the laboratory measurements was positive,which suggests that the surface of laboratory samples is forward scattering.The sign of the asymmetry parameter for MISR data was negative;that is,it is backscattering.The values of the asymmetry parameters retrieved from MISR data were related to the character of the land surface.At Loulan,where the surface was smoother than other sites,retrieved values exhibited the largest negative values of asymmetry factor,suggesting the strongest backscattering.The sand dune area of the Kumtag Desert,which has the greatest roughness,had only slightly negative asymmetry factor values.These findings indicated that at the sensor scale,a rough surface(e.g.,dunes) does not necessarily mean more backscattering than a smooth surface.This finding has significant implications for empirical methods(e.g.,using the normalized index of backward-scattered radiance minus forward-scattered radiance as an indicator of surface roughness),which should be used carefully for analyzing surface roughness from the remote sensing data.

An analytical model for bidirectional reflectance factor of multicomponent vegetation canopies

Based on radiative transfer theory in vegetation and geometric-optical principles, an analytical physi-cal mode] for calculating multiangular, multispectral reflectance over a non-random, multiple component vegetation canopy is developed. This model is derived by taking advantages of the previous leaf canopy and multicomponent canopy BRF models. It quantitatively accounts for both the impact of foliage elements’ orientation on the canopy hotspot through an innovative algorithm to estimate the hotspot function for any arbitrarily oriented foliage element and contributions of all foliage elements to the reflectance by multiple scattering. Thus, it is characterized by more com-pletely considering the integrative influence of spatial variations in optical and structural properties of all foliage ele-ments on canopy reflectance than any previous analytical BRF models. Simulation results from this model demonstrate that canopy hotspot becomes strongest when the mean inclination angle of foliage elements is