Design of multi-antenna relaying for OFDM in impulsive noise environment

A low-complexity multi-antenna relaying scheme is proposed for Orthogonal Frequency Division Multiplexing (OFDM) in the presence of Class-A Impulsive Noise (IN). One way and two way relaying are considered. The signal is transmitted and received by two terminal nodes, each with a single antenna in two time phases. In the proposed design, the processing at the relay consists of Maximal-Ratio Combining (MRC) or Power-based Selection Combining (PSC) for receive combining, Amplify and Forward (AF) for power scaling, and Space Time Block Coding (STBC) for transmit diversity. Channel State Information (CSI), Discrete Fourier Transform (DFT), and Inverse Discrete Fourier Transform (IDFT) are not needed. The Selective Mapping (SLM) technique is used at the transmitter to reduce the Peak-to-Average Power Ratio (PAPR) of the OFDM signal. Then, at the receiver, the clipping technique is used to reduce the impulses that result from the impulsive noise. The proposed system reduces the complexity of the conventional system, which uses multi-relay with a single antenna. Simulation results show that the Bit Error Rate (BER) of the proposed scheme outperforms that of the conventional scheme due to the diversity inherent in the proposed scheme.

Maximum Ratio Combining Precoding for Multi-Antenna Relay Systems

This paper addresses the design of practical communication strategies for multi-antenna amplify-and-forward and decode-and-forward relay systems. We show that simple linear techniques at the source and destination in conjunction with maximum ratio combining can provide an optimal transmission strategy in terms of received SNR without imposing a huge computational load over the relay node(s). Besides, the structures of precoding matrices are very similar at the source and relay nodes, which reduces the complexity as all nodes can play the role of source and relay nodes without changing their transmission structure. Numerical results show that the proposed transmission and reception techniques can improve the received SNR, and hence enhance the ergodic capacity.

Energy Efficient Multi-Antenna UAV-Enabled Mobile Relay

In this paper, we study an energy efficient multi-antenna unmanned aerial vehicle(UAV)-enabled half-duplex mobile relaying system under Rician fading channels. By assuming that the UAV follows a circular trajectory at fixed altitude and applying the decode-and-forward relaying strategy, we maximize the energy efficiency by jointly designing beamforming, power allocation, circular radius and flight speed, subject to the sum transmit power constraint on source node and UAV relay node. First, we maximize the end-to-end signal-to-noise ratio by jointly designing beamforming and statistical power allocation. Based on the obtained beamforming and power allocation results, we then obtain a semi closed-form expression of energy efficiency, and finally maximize energy efficiency by optimizing flight speed and circular radius, allowing optimal circular radius to be obtained via numerical computation. Numerical results demonstrate that the proposed scheme can effectively enhance the system energy efficiency.

The Average Achievable Rate of Multi-Antenna Two-Way Relay Networks with Interference Alignment

The large system analysis(LSA)has recently been shown to be a very useful tool for computing the average achievable rate.In this paper,we use LSA to derive the users’average achievable rate of multi-antenna two-way relay networks with interference alignment(IA),and we then derive the rate expressions under both equal power allocation and optimal power allocation.It is shown that the obtained closed-form rate expressions are functions of the average signal-to-noise ratio(SNR)for each data stream.Extensive simulation studies show that the average achievable rate expressions derived through LSA provide accurate estimates of the average achievable rate for two-way relay networks with interference alignment.

Outage analysis of opportunistic multi-antenna relay selection in decode-and-forward relay networks

This article studies the closed-form expressions of outage performance for opportunistic relay under aggregate power constraint in decode-and-forward （DF） relay networks over Rayleigh fading channels, assuming that multiple antennas are available at the relay node. According to whether instantaneous signal-to-noise ratio （SNR） or average SNR can be utilized for relay selection, two opportunistic relay schemes, opportunistic multi-antenna relay selection （OMRS） and average best relay selection （ABRS） are proposed. The performances of both two schemes are evaluated by means of theoretical analysis and simulation, it is observed that OMRS is outage-optimal among multi-antenna relay selection schemes and closely approaches the beamforming （BF） scheme known as theoretical outage-optimal. Compared with previous single-antenna opportunistic relaying （OR） scheme, OMRS brings remarkable performance improvement, which is obtained from maximum ratio combining （MRC） and beamforming techniques. It is also shown that the performance of ABRS in asymmetric channels is close to OMRS in the low and median SNR range.

Employing Power Allocation to Enhance Zero Forcing Scheme Advantages over Multi-Antenna Multiple Relay Networks

A multi-antenna multiple relay (MAMR) network is considered and a variation of two-hop zero-forcing amplify-forward relaying method is proposed. Deploying ZF method together with application of diagonal power allocation matrices at the relays, it is shown that the overall MAMR network is simplified to M independent single antenna multiple relay (SAMR) networks, where M is the number of source and destination antennas. This enables to incorporate network beamforming proposed for SAMR networks. Accordingly, using the BER as the performance metric, we present simulation results to show the proposed approach outperforms the common ZF method addressed in the literature.

CHANNEL ESTIMATION TECHNIQUE IN MULTI-ANTENNA AF RELAY COMMUNICATION SYSTEMS

The channel estimation technique is investigated in OFDM communication systems with multi-antenna Amplify-and-Forward(AF) relay.The Space-Time Block Code(STBC) is applied at the transmitter of the relay to obtain diversity gain.According to the transmission characteristics of OFDM symbols on multiple antennas,a pilot-aided Linear Minimum Mean-Square-Error(LMMSE) channel estimation algorithm with low complexity is designed.Simulation results show that,the proposed LMMSE estimator outperforms least-square estimator and approaches the optimal estimator without error in the performance of Symbol Error Ratio(SER) under several modulation modes,and has a good estimation effect in the realistic relay communication scenario.

Energy Efficiency Analysis of Multi-Antenna Cellular Networks with Strategic Sleep Relay

Energy efficiency(EE) of cellular networks has attracted considerable attention recently. However, EE of relay-assisted cellular networks where the macro base stations(MBSs) are equipped with the multi-antenna has not been thoroughly addressed. This paper considered the downlink transmission of multi-antenna relay-assisted cellular networks, meanwhile, a strategic sleep scheme was used in relay stations(RSs), which dynamically adjusted the RS working mode according to whether the number of users serviced by the relay exceeds a given threshold. A geometric model was built to derive the coverage probability and mean achievable rate from the MBSs to user(UE), the MBS to RS, the RS to UE links and analyze the system EE. It is shown that the energy efficiency of cellular network with strategic sleep RS is slightly higher than that of cellular network with non-sleeping strategy. Furthermore, the MBS equipped with multi-antenna has better impact on energy efficiency and spectral efficiency than the MBS with single antenna.

An SNR-Adaptive Relaying Algorithm for Multi-Antenna Cooperative Networks

Multiple-input multiple-output(MIMO) and cooperative communications have been attracted great attention for the improvements of communication capacity, power consumption, and transmission coverage. The conventional fixed relaying protocols, amplify-and-forward(AF) and decode-and-forward(DF), have their own advantages and disadvantages, i.e. AF performs better than DF for low signal-to-noise ratio(SNR) region, while the reverse is true for high SNR region. Therefore, this paper proposes an SNR-adaptive forward(SAF) relaying scheme obtaining the advantages of both AF and DF. Furthermore, the proposed SAF does not need to switch between AF and DF when SNR changes. The main idea is to adaptively derive the soft information at the cooperative relay nodes based on the information of the received signal and the SNR. Besides, based on the theoretical analysis and the simulation results, it is affirmed that the proposed SAF achieves superior performance than both AF and DF for all SNRs. Moreover, the performance gain would be improved with the increasing number of parallel cooperative relay nodes.

基于Relay的低成本4G网络覆盖增强方法

无缝覆盖是无线移动通信网络的重要特点之一。对于人烟稀少地区,比如海面,沙漠等场景,需要进行低成本的超远无线通信覆盖。但是,如果单纯地通过架设基站满足这类超远覆盖会增加运营商的基站造价成本。文章分析比较4G网络的覆盖增强部署方法,提出基于Relay的低成本覆盖增强方法。其核心思想是:根据4G网络覆盖范围要求,部署4G网络中继节点,确定网络基站和中继节点之间无线通信的最少上行子帧个数。同时,结合4G无线移动通信系统模式确定可选的中继部署类型和配置,从而实现低成本、高质量的4G网络增强覆盖。

Cooperative Covert Communication in Multi-Antenna Broadcast Channels

With the gradual popularization of 5G communications,the application of multi-antenna broadcasting technology has become widespread.Therefore,this study aims to investigate the wireless covert communication in the two-user cooperative multi-antenna broadcast channel.We focus on the issue that the deteriorated reliability and undetectability are mainly affected by the transmission power.To tackle this issue,we design a scheme based on beamforming to increase the reliability and undetectability of wireless covert communication in the multi-antenna broadcast channel.We first modeled and analyzed the cooperative multi-antenna broadcasting system,and put forward the target question.Then we use the SCA(successive convex approximation)algorithm to transform the target problem into a series of convex subproblems.Then the convex problems are solved and the covert channel capacity is calculated.In order to verify the effectiveness of the scheme,we conducted simulation verification.The simulation results show that the proposed beamforming scheme can effectively improve the reliability and undetectability of covert communication in multi-antenna broadcast channels.

Gamma Approximation Based Multi-Antenna Covert Communication Detection

Covert communication technology makes wireless communication more secure,but it also provides more opportunities for illegal users to transmit harmful information.In order to detect the illegal covert communication of the lawbreakers in real time for subsequent processing,this paper proposes a Gamma approximation-based detection method for multi-antenna covert communication systems.Specifically,the Gamma approximation property is used to calculate the miss detection rate and false alarm rate of the monitor firstly.Then the optimization problem to minimize the sum of the missed detection rate and the false alarm rate is proposed.The optimal detection threshold and the minimum error detection probability are solved according to the properties of the Lambert W function.Finally,simulation results are given to demonstrate the effectiveness of the proposed method.

Optimization of Cooperative RelayingMolecular Communications for Nanomedical Applications

Recently,nano-systems based on molecular communications via diffusion(MCvD)have been implemented in a variety of nanomedical applications,most notably in targeted drug delivery system(TDDS)scenarios.Furthermore,because the MCvD is unreliable and there exists molecular noise and inter symbol interference(ISI),cooperative nano-relays can acquire the reliability for drug delivery to targeted diseased cells,especially if the separation distance between the nano transmitter and nano receiver is increased.In this work,we propose an approach for optimizing the performance of the nano system using cooperative molecular communications with a nano relay scheme,while accounting for blood flow effects in terms of drift velocity.The fractions of the molecular drug that should be allocated to the nano transmitter and nano relay positioning are computed using a collaborative optimization problem solved by theModified Central Force Optimization(MCFO)algorithm.Unlike the previous work,the probability of bit error is expressed in a closed-form expression.It is used as an objective function to determine the optimal velocity of the drug molecules and the detection threshold at the nano receiver.The simulation results show that the probability of bit error can be dramatically reduced by optimizing the drift velocity,detection threshold,location of the nano-relay in the proposed nano system,and molecular drug budget.

Coordinated responses of leaf and nodule traits contribute to the accumulation of N in relay intercropped soybean

Maize(Zea mays L.)-soybean(Glycine max L.Merr.)relay intercropping provides a way to enhance land productivity.However,the late-planted soybean suffers from shading by the maize.After maize harvest,how the recovery growth influences the leaf and nodule traits remains unclear.A three-year field experiment was conducted to evaluate the effects of genotypes,i.e.,supernodulating(nts1007),Nandou 12(ND12),and Guixia 3(GX3),and crop configurations,i.e.,the interspecific row spacing of 45(I45),60(I60),75 cm(I75),and sole soybean(SS),on soybean recovery growth and N fixation.The results showed that intercropping reduced the soybean total leaf area(LA)by reducing both the leaf number(LN)and unit leaflet area(LUA),and it reduced the nodule dry weight(NW)by reducing both the nodule number(NN)and nodule diameter(ND)compared with the SS.The correlation and principal component analysis(PCA)indicated a co-variability of the leaf and nodule traits in response to the genotype and crop configuration interactions.During the recovery growth stages,the compensatory growth promoted soybean growth to reduce the gaps of leaf and nodule traits between intercropping and SS.The relative growth rates of ureide(RGR_U)and nitrogen(RGR_N)accumulation were higher in intercropping than in SS.Intercropping achieved more significant sucrose and starch contents compared with SS.ND12 and GX3 showed more robust compensatory growth than nts1007 in intercropping.Although the recovery growth of relay intercropping soybean improved biomass and nitrogen accumulation,ND12 gained a more significant partial land equivalent ratio(pLER)than GX3.The I60 treatment achieved more robust compensation effects on biomass and N accumulation than the other configurations.Meanwhile,I60 showed a higher nodule sucrose content and greater shoot ureide and N accumulation than SS.Finally,intercropping ND12 with maize using an interspecific row spacing of 60 cm was optimal for both yield advantage and N accumulation.

A Pricing-Based Cooperative Relay Selection Scheme for Reliable Communications

With the rapid development and application of energy harvesting technology,it has become a prominent research area due to its significant benefits in terms of green environmental protection,convenience,and high safety and efficiency.However,the uneven energy collection and consumption among IoT devices at varying distances may lead to resource imbalance within energy harvesting networks,thereby resulting in low energy transmission efficiency.To enhance the energy transmission efficiency of IoT devices in energy harvesting,this paper focuses on the utilization of collaborative communication,along with pricing-based incentive mechanisms and auction strategies.We propose a dynamic relay selection scheme,including a ladder pricing mechanism based on energy level and a Kuhn-Munkre Algorithm based on an auction theory employing a negotiation mechanism,to encourage more IoT devices to participate in the collaboration process.Simulation results demonstrate that the proposed algorithm outperforms traditional algorithms in terms of improving the energy efficiency of the system.

System design and validation of Queqiao-2 lunar relay communication satellite

In order to provide relay communication supports for future Chinese lunar exploration program,Queqiao-2 relay communication satellite was developed.Queqiao-2 can perform scientific observations with three kinds of scientific instruments on board.The system design of Queqiao-2,including mission orbit and transfer orbit design,configuration and layout design,housekeeping and information flow design,power supply and distribution design,GNC and propulsion system design,communication links design,etc.,was accomplished through comprehensive tradeoff and evaluation on technical maturity,availability,schedule,cost,and so on.With a view to reducing development risk,both the platform and relay communication payloads were developed based on significant heritage from previous Queqiao relay satellite and other relevant spacecraft.Queqiao-2 features flexible system architecture to support multiple frequencies,modulations,data rates and software reconfigurations to meet new user requirements.Subsequent to a successful launch on March 20,2024,by means of 5 orbit maneuvers,Queqiao-2 was inserted into a highly elliptical frozen mission orbit around the moon with a 24h period on schedule.Following on-orbit tests and calibrations,Queqiao-2 has possessed the capacity to provide reliable relay communication services to multiple lunar exploration missions,as well as the capacity to perform scientific observations.Under the support of Queqiao-2,Chang′e-6 achieved its ambitious mission goal to collect and return samples from the moon′s mysterious far side.In the meanwhile,Queqiao-2 has also paved the way for the following Chinese lunar exploration missions including Chang′e-7 and Chang′e-8.The design life time of Queqiao-2 is more than 8 years.Benefit from flexibility and extensibility of relay communication system design,it is convenient to provide relay communication services for future lunar exploration missions of both China and other countries.In addition,innovative scientific observations would be performed during the period that no relay communication task is arranged.The system design of Queqiao-2 reflects the development philosophy of technical innovations and inheritance integration.Based on highly flexible and extensible system architecture,multiple and concurrent relay communication mission requirements can be met.It can provide strong supports for future lunar exploration missions.Successful launching,orbit entering and on-orbit tests of Queqiao-2 verified the correct design principle and versatility.By means of Queqiao-2,more innovative scientific outcomes are anticipated and lunar exploration activities can be facilitated.

Security-Reliability Tradeoff Analysis for Jamming Aided Decode-and-Forward Relay Networks

In this paper,we explore a cooperative decode-and-forward(DF)relay network comprised of a source,a relay,and a destination in the presence of an eavesdropper.To improve physical-layer security of the relay system,we propose a jamming aided decodeand-forward relay(JDFR)scheme combining the use of artificial noise and DF relaying which requires two stages to transmit a packet.Specifically,in stage one,the source sends confidential message to the relay while the destination acts as a friendly jammer and transmits artificial noise to confound the eavesdropper.In stage two,the relay forwards its re-encoded message to the destination while the source emits artificial noise to confuse the eavesdropper.In addition,we analyze the security-reliability tradeoff(SRT)performance of the proposed JDFR scheme,where security and reliability are evaluated by deriving intercept probability(IP)and outage probability(OP),respectively.For the purpose of comparison,SRT of the traditional decode-and-forward relay(TDFR)scheme is also analyzed.Numerical results show that the SRT performance of the proposed JDFR scheme is better than that of the TDFR scheme.Also,it is shown that for the JDFR scheme,a better SRT performance can be obtained by the optimal power allocation(OPA)between the friendly jammer and user.

Beamforming Design for IRS-and-UAV-Aided Two-Way Amplify-and-Forward Relay Networks in Maritime IoT

In this paper,an intelligent reflecting surface(IRS)-and-unmanned aerial vehicle(UAV)-assisted two-way amplify-and-forward(AF)relay network in maritime Internet of Things(IoT)is proposed,where ship1(S1)and ship2(S2)can be viewed as data collecting centers.To enhance the message exchange rate between S1 and S2,a problem of maximizing minimum rate is cast,where the variables,namely AF relay beamforming matrix and IRS phase shifts of two time slots,need to be optimized.To achieve a maximum rate,a low-complexity alternately iterative(AI)scheme based on zero forcing and successive convex approximation(LC-ZF-SCA)algorithm is presented.To obtain a significant rate enhancement,a high-performance AI method based on one step,semidefinite programming and penalty SCA(ONSSDP-PSCA)is proposed.Simulation results show that by the proposed LC-ZF-SCA and ONS-SDP-PSCA methods,the rate of the IRS-and-UAV-assisted AF relay network surpass those of with random phase and only AF relay networks.Moreover,ONS-SDP-PSCA perform better than LC-ZF-SCA in aspect of rate.

Designing a Protection Scheme in Micro-Grid Systems with DG Using Central Protection Unite and Multiple Setting Group Protection Relays

Distributed generators now is widely used in electrical power networks, in some cases it works seasonally, and some types works at special weather conditions like photo voltaic systems and wind energy, and due to this continuous changes in generation condition, the fault current level in network will be affected, this changes in fault current level will affect in the coordination between protection relays and to keep the coordination at right way, an adaptive protection system is required that can adaptive its setting according to generation changes, the fault current level in each case is evaluated using ETAP software, and the required relay setting in each case is also evaluated using Grey Wolf Optimizer (GWO) algorithm, and to select suitable setting which required in each condition, to select the active setting group of protection relay according to generation capacity, central protection unite can be used, and to improve protection stability and minimizing relays tripping time, a proposed method for selecting suitable backup relay is used, which leads to decrease relays tripping time and increase system stability, output settings for relays in all cases achieved our constrains.

Security-Reliability Analysis and Optimization for Cognitive Two-Way Relay Network with Energy Harvesting

This paper investigates the security and reliability of information transmission within an underlay wiretap energy harvesting cognitive two-way relay network.In the network,energy-constrained secondary network(SN)nodes harvest energy from radio frequency signals of a multi-antenna power beacon.Two SN sources exchange their messages via a SN decode-and-forward relay in the presence of a multiantenna eavesdropper by using a four-phase time division broadcast protocol,and the hardware impairments of SN nodes and eavesdropper are modeled.To alleviate eavesdropping attacks,the artificial noise is applied by SN nodes.The physical layer security performance of SN is analyzed and evaluated by the exact closed-form expressions of outage probability(OP),intercept probability(IP),and OP+IP over quasistatic Rayleigh fading channel.Additionally,due to the complexity of OP+IP expression,a self-adaptive chaotic quantum particle swarm optimization-based resource allocation algorithm is proposed to jointly optimize energy harvesting ratio and power allocation factor,which can achieve security-reliability tradeoff for SN.Extensive simulations demonstrate the correctness of theoretical analysis and the effectiveness of the proposed optimization algorithm.