Haulage networks are vital to underground mining operations as they constitute the arteries through which blasted ore is transported to surface. In the sublevel stoping method and its variations, haulage drifts are ex...Haulage networks are vital to underground mining operations as they constitute the arteries through which blasted ore is transported to surface. In the sublevel stoping method and its variations, haulage drifts are excavated in advance near the ore block that will be mined out. Numerical modeling is a technique that is frequently employed to assess the redistribution of mining-induced stresses, and to compare the impact of different stope sequence scenarios on haulage network stability. In this study,typical geological settings in the Canadian Shield were replicated in a numerical model with a steeplydipping tabular orebody striking EW. All other formations trended in the same direction except for two dykes on either side of the orebody with a WNW-ESE strike. Rock mass properties and in situ stress measurements from a case study mine were used to calibrate the model. Drifts and crosscuts were excavated in the footwall and two stope sequence scenarios-a diminishing pillar and a center-out one-were implemented in 24 mining stages. A combined volumetric-numerical analysis was conducted for two active levels by comparing the extent of unstable rock mass at each stage using shear,compressive, and tensile instability criteria. Comparisons were made between the orebody and the host rock, between the footwall and hanging wall, and between the two stope sequence scenarios. It was determined that in general, the center-out option provided a larger volume of instability with the shear criterion when compared to the diminishing pillar one(625,477 m~3 compared to 586,774 m~3 in the orebody; 588 m~3 compared to 403 m~3 in the host rock). However, the reverse was true for tensile(134,298 m~3 compared to 128,834 m~3 in the orebody; 91,347 m~3 compared to 67,655 m~3 in the host rock)instability where the diminishing pillar option had the more voluminous share.展开更多
Based on the function analysis of surge bunker in mine haulage system, the authors raise the calculation methods of the total output of a mine haulage system. Taking the maximum of system’s total throughput as a obje...Based on the function analysis of surge bunker in mine haulage system, the authors raise the calculation methods of the total output of a mine haulage system. Taking the maximum of system’s total throughput as a objective, the method of determining the surge bunker’s rational size is put forward. Also, the problems of rational position of surge bunker are analysesed.展开更多
A novel speed sensor-less direct torque control induction motor drive system for the mining locomotive haulage is presented in the paper. Rotor speed identification is based on the model reference adaptive control the...A novel speed sensor-less direct torque control induction motor drive system for the mining locomotive haulage is presented in the paper. Rotor speed identification is based on the model reference adaptive control theory with neural network using back propagation algorithm. The system is implemented using a real-time TMS320F240 digital signal processor. The simulation study and experiment results indicate that the suggested system has good performance.展开更多
Haulage drifts play a vital role in providing personnel and equipment access to ore extraction areas for mine production. Thus, their stability is of crucial importance during the life of a mine plan. Many Canadian mi...Haulage drifts play a vital role in providing personnel and equipment access to ore extraction areas for mine production. Thus, their stability is of crucial importance during the life of a mine plan. Many Canadian mines use longhole mining methods or one of its variants. These methods require access to the orebody through haulage drifts on multiple levels. This paper examines the stability of mine haulage drifts with respect to planned mining sequence. A case study of an underground mine is presented. The case study examines # l Shear East of the Garson Mine in Sudbury, Ontario. A two-dimensional, elastoplastic, finite difference model （FLAC 2D） is developed for a haulage drift situated 1.5 km below surface in the footwall of the orebody. The stability of the haulage drift is evaluated in terms of the spread of yield zones into the rockmass due to nearby mining activities. The performance of the drift stability is evaluated at various mining stages, employing the RMC （Random Monte-Carlo） technique in conjunction with finite difference modeling to study the probability of unsatisfactory performance of the drift. The results are presented and categorized with respect to probability, instability and mining stage.展开更多
基金financially supported by the Natural Science and Engineering Research Council of Canada(NSERC) with grant No.223079
文摘Haulage networks are vital to underground mining operations as they constitute the arteries through which blasted ore is transported to surface. In the sublevel stoping method and its variations, haulage drifts are excavated in advance near the ore block that will be mined out. Numerical modeling is a technique that is frequently employed to assess the redistribution of mining-induced stresses, and to compare the impact of different stope sequence scenarios on haulage network stability. In this study,typical geological settings in the Canadian Shield were replicated in a numerical model with a steeplydipping tabular orebody striking EW. All other formations trended in the same direction except for two dykes on either side of the orebody with a WNW-ESE strike. Rock mass properties and in situ stress measurements from a case study mine were used to calibrate the model. Drifts and crosscuts were excavated in the footwall and two stope sequence scenarios-a diminishing pillar and a center-out one-were implemented in 24 mining stages. A combined volumetric-numerical analysis was conducted for two active levels by comparing the extent of unstable rock mass at each stage using shear,compressive, and tensile instability criteria. Comparisons were made between the orebody and the host rock, between the footwall and hanging wall, and between the two stope sequence scenarios. It was determined that in general, the center-out option provided a larger volume of instability with the shear criterion when compared to the diminishing pillar one(625,477 m~3 compared to 586,774 m~3 in the orebody; 588 m~3 compared to 403 m~3 in the host rock). However, the reverse was true for tensile(134,298 m~3 compared to 128,834 m~3 in the orebody; 91,347 m~3 compared to 67,655 m~3 in the host rock)instability where the diminishing pillar option had the more voluminous share.
文摘Based on the function analysis of surge bunker in mine haulage system, the authors raise the calculation methods of the total output of a mine haulage system. Taking the maximum of system’s total throughput as a objective, the method of determining the surge bunker’s rational size is put forward. Also, the problems of rational position of surge bunker are analysesed.
文摘A novel speed sensor-less direct torque control induction motor drive system for the mining locomotive haulage is presented in the paper. Rotor speed identification is based on the model reference adaptive control theory with neural network using back propagation algorithm. The system is implemented using a real-time TMS320F240 digital signal processor. The simulation study and experiment results indicate that the suggested system has good performance.
文摘Haulage drifts play a vital role in providing personnel and equipment access to ore extraction areas for mine production. Thus, their stability is of crucial importance during the life of a mine plan. Many Canadian mines use longhole mining methods or one of its variants. These methods require access to the orebody through haulage drifts on multiple levels. This paper examines the stability of mine haulage drifts with respect to planned mining sequence. A case study of an underground mine is presented. The case study examines # l Shear East of the Garson Mine in Sudbury, Ontario. A two-dimensional, elastoplastic, finite difference model （FLAC 2D） is developed for a haulage drift situated 1.5 km below surface in the footwall of the orebody. The stability of the haulage drift is evaluated in terms of the spread of yield zones into the rockmass due to nearby mining activities. The performance of the drift stability is evaluated at various mining stages, employing the RMC （Random Monte-Carlo） technique in conjunction with finite difference modeling to study the probability of unsatisfactory performance of the drift. The results are presented and categorized with respect to probability, instability and mining stage.
