The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques ...The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.展开更多
Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and...Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and four-wave mixing （FWM） in a high-nonlinear photonic crystal fiber （PCF）. The high-nonlinear PCF is employed for the generation of the FWM to obtain stable and uniform dual-wavelength oscillation. Two different short passive sub-ring cavities in the main ring cavity serve as mode filters to make SLM lasing. The two lasing wavelengths are electronically selected by loading different gratings on the Opto-DMD processor controlled with a computer. The wavelength spacing can be smartly adjusted from 0.165 nm to 1.08 nm within a tuning accuracy of 0.055 nm. Two microwave signals at 17.23 GHz and 27.47 GHz are achieved. The stability of the microwave signal is discussed. The system has the ability to generate a 137.36-GHz photonic millimeter signal at room temperature.展开更多
This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Se...This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.展开更多
A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules： radar system timer, binary phase coded pulse compression（PC...A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules： radar system timer, binary phase coded pulse compression（PC）, moving target detection （MTD）, constant false alarm rate （CFAR） and target dots processing. Preliminary target dots information is obtained in PC, MTD, and CFAR modules and Nios I! CPU is used for target dots combination and false sidelobe target removing. Sys- tem on programmable chip （SOPC） technique is adopted in the system in which SDRAM is used to cache data. Finally, a FPGA-based binary phase coded radar signal processor is realized and simula- tion result is given.展开更多
A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system ...A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table （LUT） method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently.展开更多
The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generatio...The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.展开更多
In a flank array on an unmanned underwater vehicle （UUV）, self-generated noise which has broadband and colored spectrum property in frequency and spatial domain is the main factor affecting the performance of weak s...In a flank array on an unmanned underwater vehicle （UUV）, self-generated noise which has broadband and colored spectrum property in frequency and spatial domain is the main factor affecting the performance of weak signal detection, so the technique of adaptive noise cancellation （ANC） as well as physical denoising and active noise cancellation are often used in practice. Because ANC is based on correlations, improvements in performance come from better correlation between reference signals and primary signals. Taking full advantage of the characteristics of flank arrays and the characteristics of information obtained from hydrophones, a new method for reference signal acquisition for adaptive noise cancellation is proposed, in which the multi-channel reference signals are obtained by accurate delaying for a given direction of arrival （DOA） and differencing between adjacent outputs of array elements. The validity of the proposed method was verified through system modeling simulations and lake experiments which showed good performance with little additional computational burden.展开更多
We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can rand...We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.展开更多
In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied,...In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.展开更多
Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermo...Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermore,in this paper we discuss the validity of instruction prefetch,the branch prediction,the depth of instruction window and other issues that can affect the performance of superscalar DSP.展开更多
国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令...国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令排布、为指令静态分配硬件执行单元、GPDSP特有的向量指令等方面不能很好地支持高性能加速器。基于低级虚拟器(LLVM)编译框架,在前寄存器分配调度阶段,结合峰值寄存器压力感知方法(PERP)、蚁群优化(ACO)算法与GPDSP结构特点,优化代价模型,设计支持寄存器压力感知的指令调度模块;在后寄存器分配阶段提出支持静态功能单元分配的指令调度策略,通过冲突检测机制保证功能单元分配的正确性,为指令并行执行提供软件基础;在后端封装一系列丰富且规整的向量指令接口,实现对GPDSP向量指令的支持。实验结果表明,所提出的LLVM编译架构优化方法从功能和性能上实现了对GPDSP的良好支撑,GCC testsuite测试整体性能平均加速比为4.539,SPEC CPU 2017浮点测试整体性能平均加速比为4.49,SPEC CPU 2017整型测试整体性能平均加速比为3.24,使用向量接口的向量程序实现了平均97.1%的性能提升率。展开更多
文摘The automation process is a very important pillar for Industry 4.0.One of the first steps is the control of motors to improve production efficiency and generate energy savings.In mass production industries,techniques such as digital signal processing(DSP)systems are implemented to control motors.These systems are efficient but very expensive for certain applications.From this arises the need for a controller capable of handling AC and DC motors that improves efficiency and maintains low energy consumption.This project presents the design of an adaptive control system for brushless AC induction and DC motors,which is functional to any type of plant in the industry.The design was possible by implementing Matlab software and tools such as digital signal processor(DSP)and Simulink.Through an extensive investigation of the state of the art,three models needed to represent the control system have been specified.The first model for the AC motor,the second for the DC motor and the third for the DSP control;this is done in this way so that the probability of failure is lower.Subsequently,these models have been programmed in Simulink,integrating the three main models into one.In this way,the design of a controller for use in AC induction motors,specifically squirrel cage and brushless DC motors,has been achieved.The final model represents a response time of 0.25 seconds,which is optimal for this type of application,where response times of 2e-3 to 3 seconds are expected.
基金supported by the National Basic Research Program of China(Grant No.2010CB327605)the Specialized Research Fund for the Doctoral Program of Higher Education,China(Grant No.20120005120021)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.2013RC1202)the Program for New Century Excellent Talents in University,China(Grant No.NECT-11-0596)the Beijing Nova Program,China(Grant No.2011066)
文摘Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and four-wave mixing （FWM） in a high-nonlinear photonic crystal fiber （PCF）. The high-nonlinear PCF is employed for the generation of the FWM to obtain stable and uniform dual-wavelength oscillation. Two different short passive sub-ring cavities in the main ring cavity serve as mode filters to make SLM lasing. The two lasing wavelengths are electronically selected by loading different gratings on the Opto-DMD processor controlled with a computer. The wavelength spacing can be smartly adjusted from 0.165 nm to 1.08 nm within a tuning accuracy of 0.055 nm. Two microwave signals at 17.23 GHz and 27.47 GHz are achieved. The stability of the microwave signal is discussed. The system has the ability to generate a 137.36-GHz photonic millimeter signal at room temperature.
基金Supported by the National High Technology Research & Development Program of China (863 Program) (2002AA1Z1140).
文摘This paper presents a design method of ByPassing Unit(BPU) in 32-bit Digital Signal Processor(DSP)-MD32. MD32 is realized in 0,18μm technology, 1.8V and 200 MHz working clock. It focuses on the Reduced Instruction Set Computer(RISC) architecture and DSP computation capability thoroughly, extends DSP with various addressing modes in a customized DSP pipeline stage architecture. The paper also discusses the architecture and circuit design of bypassing logic to fit MD32 architecture. The parallel execution of BPU with instruction decode in architecture level is applied to reduce time delay. The optimization of circuit that serial select with priority is analyzed in detail, and the result shows that about half of time delay is reduced after this optimization. Examples show that BPU is useful for improving the DSP's performance.The forwarding logic in MD32 realizes 8 data channels feedback and meets the working clock limit.
基金Supported by the Ministerial Level Advanced Research Foundation (SP240012)
文摘A flexible field programmable gate array based radar signal processor is presented. The radar signal processor mainly consists of five functional modules： radar system timer, binary phase coded pulse compression（PC）, moving target detection （MTD）, constant false alarm rate （CFAR） and target dots processing. Preliminary target dots information is obtained in PC, MTD, and CFAR modules and Nios I! CPU is used for target dots combination and false sidelobe target removing. Sys- tem on programmable chip （SOPC） technique is adopted in the system in which SDRAM is used to cache data. Finally, a FPGA-based binary phase coded radar signal processor is realized and simula- tion result is given.
基金supported by National Natural Science Foundation of China(No.50375054)China Postdoctoral Science Foundation (No.20060400745).
文摘A fuzzy logic intelligent control system of pulsed MAG welding inverter based on digital signal processor （DSP） is proposed to obtain the consistency of arc length in pulsed MAG welding. The proposed control system combines the merits of intelligent control with DSP digital control. The fuzzy logic intelligent control system designed is a typical two-input-single-output structure, and regards the error and the change in error of peak arc voltage as two inputs and the background time as single output. The fuzzy logic intelligent control system is realized in a look-up table （LUT） method by using MATLAB based fuzzy logic toolbox, and the implement of LUT method based on DSP is also discussed. The pulsed MAG welding experimental results demonstrate that the developed fuzzy logic intelligent control system based on DSP has strong arc length controlling ability to accomplish the stable pulsed MAG welding process and controls pulsed MAG welding inverter digitally and intelligently.
文摘The relativity of instructions of motor control digital signal processor (MCDSP) in the design is analyzed. A method for obtaining a minimum instruction set in plac e of the complete instruction set during generation of testing procedures is giv en in terms of the processor presentation matrix between micro-operators and in structions of MCDSP.
基金the National Natural Science Foundation of China under Grant No.60572098
文摘In a flank array on an unmanned underwater vehicle （UUV）, self-generated noise which has broadband and colored spectrum property in frequency and spatial domain is the main factor affecting the performance of weak signal detection, so the technique of adaptive noise cancellation （ANC） as well as physical denoising and active noise cancellation are often used in practice. Because ANC is based on correlations, improvements in performance come from better correlation between reference signals and primary signals. Taking full advantage of the characteristics of flank arrays and the characteristics of information obtained from hydrophones, a new method for reference signal acquisition for adaptive noise cancellation is proposed, in which the multi-channel reference signals are obtained by accurate delaying for a given direction of arrival （DOA） and differencing between adjacent outputs of array elements. The validity of the proposed method was verified through system modeling simulations and lake experiments which showed good performance with little additional computational burden.
基金Supported by the State Key Laboratory of Particle Detection and Electronicsthe National Natural Science Foundation of China under Grant No 11375179
文摘We develop an improved design of thin gap chamber （TGC） simulation signal source. To further simulate the feature of TGC detector, a novel thought is proposed. The TGC source has 256 channels. Every channel can randomly output the signal in 25 ns. The design is based on true random number generator （TRNG）. Considering the electrical connection between the TGC source and the developing trigger electronics, the GFZ connector is used. The experimental results show that the improved TGC simulation signal source can uniformly output the random signal in every channel. The output noise is less than 3 mVrms.
文摘In today’s world, the development ofeconomy has led to the continuous developmentand evolution of science and technology. Computertechnology and large-scale integration technologyhave been well developed and applied, followed by thetechnology of digital signal processing DSP productionand application. In the field of logging, the applicationfunction of this technology plays a key role. It not onlyallows the imaging logging technology to be furtherdeveloped, but also enables fast and accurate processingof downhole signals. Therefore, among many loggingtools today, digital signal processing DSPs have beenwidely used, and their functions have been fullyutilized. This paper analyzes the application of signalprocessor DSP in logging instruments. It is hoped thatit can play a reference role in the good application anddevelopment of logging instruments.
文摘Under the direction of design space theory,in this paper we discuss the design of a superscalar pipelining using the way of multiple issues,and the implement of a superscalar based RISC DSP architecture,SDSP.Furthermore,in this paper we discuss the validity of instruction prefetch,the branch prediction,the depth of instruction window and other issues that can affect the performance of superscalar DSP.
文摘国防科技大学自主研制的高性能加速器采用中央处理器(CPU)+通用数字信号处理器(GPDSP)的片上异构融合架构,使用超长指令集(VLIW)+单指令多数据流(SIMD)的向量化结构的GPDSP是峰值性能主要支撑的加速核。主流编译器在密集的数据计算指令排布、为指令静态分配硬件执行单元、GPDSP特有的向量指令等方面不能很好地支持高性能加速器。基于低级虚拟器(LLVM)编译框架,在前寄存器分配调度阶段,结合峰值寄存器压力感知方法(PERP)、蚁群优化(ACO)算法与GPDSP结构特点,优化代价模型,设计支持寄存器压力感知的指令调度模块;在后寄存器分配阶段提出支持静态功能单元分配的指令调度策略,通过冲突检测机制保证功能单元分配的正确性,为指令并行执行提供软件基础;在后端封装一系列丰富且规整的向量指令接口,实现对GPDSP向量指令的支持。实验结果表明,所提出的LLVM编译架构优化方法从功能和性能上实现了对GPDSP的良好支撑,GCC testsuite测试整体性能平均加速比为4.539,SPEC CPU 2017浮点测试整体性能平均加速比为4.49,SPEC CPU 2017整型测试整体性能平均加速比为3.24,使用向量接口的向量程序实现了平均97.1%的性能提升率。
