The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kind...The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.展开更多
DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other softwar...DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.展开更多
In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is ...In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.展开更多
This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal p...This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal processors (DSPs) and general purpose processors (GPPs) - meet them.展开更多
The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning...The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning,multi-beam forming and so on,which can improve the ability of detecting,sensing and tracking multiple targets of the fuze. The small RF MEMS smart antenna consists of a 2 × 2 aperture coupled antenna array and six 1-bit MEMS phase shifters. Simulated results demonstrate that the antenna can complete beam steering angles of ± 30° in both X and Y plane at 17. 3 GHz. All components can be fabricated and monolithically integrated with MEMS technology which causes the system low cost and small volume. The RF MEMS smart antenna presents a good and important prospect for the development of the software radio fuze antenna.展开更多
The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implem...The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.展开更多
Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety ...Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety of hazardous military and government operations. In this paper, we develop through-wall virtual imaging using Wi-Fi enabled software defined radio to see moving objects and their relative locations. We use LabVIEW and NI Universal Software Radio Peripheral （NI USRP2921 radios with Ettus Research LP0965 directive antennas） devices to detect moving objects behind walls by sending and receiving a signal with respect to the USRP＇s location. Based on the signal-to-interference ratio of our signal （rather than the traditional signal-to-noise method）, we could determine the target object behind the wall. The two major applications for this project are： detecting an active shooter that is standing on the other side of the wall and detecting abnormalities in the human body such as breast cancer with more sensitive antennas. Likewise, firefighters, law enforcement officers, and military men would find more practical purposes for the use of this system in their fields. We evaluate the proposed model using experimental results.展开更多
Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for...Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for as much portion of the circuitry as possible, so that the implementation could be carried out by programmable digital processors. For this purpose, the incoming radio frequency (RF) signal is down converted to baseband spectrum using band pass sampling method. Research works carried out so far in this field have developed a few algorithms for band pass sampling. But, these algorithms are not much useful for most of the mobile communication systems and they use complex methodology for computing the sampling frequency values. In order to use the SDR platform to integrate all current wireless technologies, an efficient, cost effective and less complex algorithm that can be labelled as universal band pass sampling algorithm is developed in this paper for multiple mobile systems. This algorithm is based on a novel idea of inserting guard bands between the signals which reduces the design complexities of perfect ADC and sharp cut off filters. Using this algorithm, valid sampling frequency ranges and corresponding IF values are calculated for down converting RF signals. The algorithm is tested for six RF signals of different wireless technologies which are integrated and simultaneously down converted using SDR based front end receiver and thus the system multiplies the base station capacity by a factor of six. The simulation results are obtained and shown in this paper which proves that the algorithm developed works well for most of the wireless technologies.展开更多
A new approach for improving the throughputs of multi- channel packet radio systems is proposed. Based on the charac- teristics of multi-code CDMA technology, the scheme factitiously improves the transmission bit rate...A new approach for improving the throughputs of multi- channel packet radio systems is proposed. Based on the charac- teristics of multi-code CDMA technology, the scheme factitiously improves the transmission bit rate of a terminal by compressing the packet transmission time and thereby increases the number of the orthogonal spreading codes used by the terminal. By this means, the average interference level of the system is reduced and the system capacity is improved. Simulation results show that the proposed scheme exhibits larger throughput compared with the traditional multi-code CDMA slotted Aloha systems.展开更多
Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processin...Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processing. Such system can help accelerate research and development of future wireless network, especially in the case of cellular/Wi-Fi co-existing networks. This platform is based on the Intel general-purpose processor and the universal software radio peripheral(USRP) radio front end. The design including the physical layer implementations is purely software and is optimized for real-time signal processing on the general purpose processor. In the lab experiment, this platform supports baseband rate up to 700 Mbps with 2 transmitters in 80 MHz bandwidth. A cellular-Wi-Fi signaling interface between the Wi-Fi access point(AP) and the 5G core network is also developed and validated as an example for wireless resource allocation.展开更多
文摘The functions and characteristics of software radio are discussed. Using techniques and method of software radio, the concept and advantages of a new kind of radio fuze, software radio fuze, are analysed. Several kinds of hardware platform structures of the software radio fuze are studied and the key techniques are analysed. The software radio fuze will become the most promising radio fuze techniques in 21st century.
文摘DQPSK modem has been chosen as the modem scheme in many mobile communication systems. A new signal processing technique of π/4-DQPSK modem based on software radio is discussed in this paper. Unlike many other software radio solutions to the subject, we choose a universal digital radio baseband processor operating as the co-processor of DSP. Only the core algorithms for signal processing are implemented with DSP. Thus the computation burden on DSP is reduced significantly. Compared with the traditional ones, the technique mentioned in this paper is more promising and attractive. It is extremely compact and power-efficient, which is often required by a mobile communication system. The implementation of baseband signal processing for π/4-DQPSK modem on this platform is illustrated in detail. Special emphases are laid on the architecture of the system and the algorithms used in the baseband signal processing. Finally, some experimental results are presented and the performances of the signal processing and compensation algorithms are evaluated through computer simulations.
基金Project(2013QNA49)supported by the Fundamental Research Funds for the Central Universities,China
文摘In radio receivers,complete implementation of the software defined radio(SDR) concept is mainly limited by frontend.Based on bandpass sampling(BPS) theory,a flexible digital frontend(DFE) platform for SDR receiver is designed.In order to increase the processing speed,Gigabit Ethernet was applied in the platform at speed of 5×10~8 bit/s.By appropriate design of interpolant according to the position of input RF signals,multi-band receiving can be realized in the platform with suppression more than 35 d B without changing hardware.
文摘This paper reviews the requirements for Software Defi ned Radio (SDR) systems for high-speed wireless applications and compares how well the different technology choices available-from ASICs, FPGAs to digital signal processors (DSPs) and general purpose processors (GPPs) - meet them.
文摘The signal transceiver of the software radio fuze depends on the front-end radio frequency（ RF） antenna. RF micro-electro-mechanical-system（ MEMS） smart antennas have the capability of flexible beam rapid scanning,multi-beam forming and so on,which can improve the ability of detecting,sensing and tracking multiple targets of the fuze. The small RF MEMS smart antenna consists of a 2 × 2 aperture coupled antenna array and six 1-bit MEMS phase shifters. Simulated results demonstrate that the antenna can complete beam steering angles of ± 30° in both X and Y plane at 17. 3 GHz. All components can be fabricated and monolithically integrated with MEMS technology which causes the system low cost and small volume. The RF MEMS smart antenna presents a good and important prospect for the development of the software radio fuze antenna.
文摘The Paper introduces an IF software radio receiver development Platform based on high-speed monolithic A/D Converter AD6640, Progranunable Digital Down-converter AD6620 and high-speed DSP chip TMSC320C6701. The implementation method is described as well as AD6620 parameter setting analysis. It also presents a flow chart of the on-line programming with the help of PC. The algorithm for demodulation AM signal is discussed.
基金Acknowledgements This work was supported in part by the U.S. National Science Foundation （NSF） under grants CNS-1405670 and CN5-1658972. However, any opinions, findings, and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the NSE
文摘Modern handheld target detection methods are typically restricted to line of sight （LOS） techniques. The design of a new method to detect moving targets through non-transparent surfaces could greatly aid the safety of hazardous military and government operations. In this paper, we develop through-wall virtual imaging using Wi-Fi enabled software defined radio to see moving objects and their relative locations. We use LabVIEW and NI Universal Software Radio Peripheral （NI USRP2921 radios with Ettus Research LP0965 directive antennas） devices to detect moving objects behind walls by sending and receiving a signal with respect to the USRP＇s location. Based on the signal-to-interference ratio of our signal （rather than the traditional signal-to-noise method）, we could determine the target object behind the wall. The two major applications for this project are： detecting an active shooter that is standing on the other side of the wall and detecting abnormalities in the human body such as breast cancer with more sensitive antennas. Likewise, firefighters, law enforcement officers, and military men would find more practical purposes for the use of this system in their fields. We evaluate the proposed model using experimental results.
文摘Software Defined Radio (SDR) architecture allows us to integrate different mobile technologies using common hardware but with different software modules. To achieve this, we need to keep the signal in digital form for as much portion of the circuitry as possible, so that the implementation could be carried out by programmable digital processors. For this purpose, the incoming radio frequency (RF) signal is down converted to baseband spectrum using band pass sampling method. Research works carried out so far in this field have developed a few algorithms for band pass sampling. But, these algorithms are not much useful for most of the mobile communication systems and they use complex methodology for computing the sampling frequency values. In order to use the SDR platform to integrate all current wireless technologies, an efficient, cost effective and less complex algorithm that can be labelled as universal band pass sampling algorithm is developed in this paper for multiple mobile systems. This algorithm is based on a novel idea of inserting guard bands between the signals which reduces the design complexities of perfect ADC and sharp cut off filters. Using this algorithm, valid sampling frequency ranges and corresponding IF values are calculated for down converting RF signals. The algorithm is tested for six RF signals of different wireless technologies which are integrated and simultaneously down converted using SDR based front end receiver and thus the system multiplies the base station capacity by a factor of six. The simulation results are obtained and shown in this paper which proves that the algorithm developed works well for most of the wireless technologies.
基金supported by the National Basic Research Program of China(973 Program)(2007CB310607)the National Natural Science Foundation of China(60772061)+1 种基金the Natural Science Foundation for the Universities in Jiangsu Province(06KJB51007806KJA51001)
文摘A new approach for improving the throughputs of multi- channel packet radio systems is proposed. Based on the charac- teristics of multi-code CDMA technology, the scheme factitiously improves the transmission bit rate of a terminal by compressing the packet transmission time and thereby increases the number of the orthogonal spreading codes used by the terminal. By this means, the average interference level of the system is reduced and the system capacity is improved. Simulation results show that the proposed scheme exhibits larger throughput compared with the traditional multi-code CDMA slotted Aloha systems.
基金supported in part by the National Natural Science Foundation of China under Grant No. 61671436the Science and Technology Commission Foundation of Shanghai under Grant No. 15511102602, 16511104204
文摘Wireless local area network(WLAN) is an indivisible part of the next generation wireless system. In this paper, an open Wi-Fi platform is designed and developed with special consideration of real-time signal processing. Such system can help accelerate research and development of future wireless network, especially in the case of cellular/Wi-Fi co-existing networks. This platform is based on the Intel general-purpose processor and the universal software radio peripheral(USRP) radio front end. The design including the physical layer implementations is purely software and is optimized for real-time signal processing on the general purpose processor. In the lab experiment, this platform supports baseband rate up to 700 Mbps with 2 transmitters in 80 MHz bandwidth. A cellular-Wi-Fi signaling interface between the Wi-Fi access point(AP) and the 5G core network is also developed and validated as an example for wireless resource allocation.
