In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types： direct pow...In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types： direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations （PDEs） are transformed into non linear self-similar ordinary differential equations （ODEs） by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting.展开更多
In this study,adopting uniform design method established a mathematical model to prepare multi-element active flux. GH4169 superalloy plates were welded by the Nd: YAG laser equipment with the prepared active flux. Th...In this study,adopting uniform design method established a mathematical model to prepare multi-element active flux. GH4169 superalloy plates were welded by the Nd: YAG laser equipment with the prepared active flux. The results show all kinds of fluxes increase the depth to width ratio and the multi-component systems are more significant. The largest increment of the weld depth to width ratio is 159%,obtained by using of the F12 series flux. It is proved that by using of the active flux to increase the depth to width ratio of micro laser welding is feasible.展开更多
This paper describes the application of the variance method for flux estimation over a mixed agricultural region in China. Eddy covariance and flux variance measurements were conducted in a near-surface layer over a n...This paper describes the application of the variance method for flux estimation over a mixed agricultural region in China. Eddy covariance and flux variance measurements were conducted in a near-surface layer over a non-uniform land surface in the central plain of China from 7 June to 20 July 2002. During this period, the mean canopy height was about 0.50 m. The study site consisted of grass （10% of area）, beans （15%）, corn （15%） and rice （60%）. Under unstable conditions, the standard deviations of temperature and water vapor density （normalized by appropriate scaling parameters）, observed by a single instrument, followed the Monin-Obukhov similarity theory. The similarity constants for heat （CT） and water vapor （Cq） were 1.09 and 1.49, respectively. In comparison with direct measurements using eddy covariance techniques, the flux variance method, on average, underestimated sensible heat flux by 21% and latent heat flux by 24%, which may be attributed to the fact that the observed slight deviations （20% or 30% at most） of the similarity ＂constants＂ may be within the expected range of variation of a single instrument from the generally-valid relations.展开更多
A semiclassical method based on the closed-orbit theory is applied to analysing the dynamics of photodetached electron of H- in the parallel electric and magnetic fields. By simply varying the magnetic field we reveal...A semiclassical method based on the closed-orbit theory is applied to analysing the dynamics of photodetached electron of H- in the parallel electric and magnetic fields. By simply varying the magnetic field we reveal spatial bifurcations of electron orbits at a fixed emission energy, which is referred to as the fold caustic in classical motion. The quantum manifestations of these singularities display a series of intermittent divergences in electronic flux distributions. We introduce semiclassical uniform approximation to repair the electron wavefunctions locally in a mixed phase space and obtain reasonable results. The approximation provides a better treatment of the problem.展开更多
A measurement system has been developed based on high-precision printed probes in printed circuit board （PCB） and steep rising-time probe adapters, which can be applied to study the expansion uniformity of armature ...A measurement system has been developed based on high-precision printed probes in printed circuit board （PCB） and steep rising-time probe adapters, which can be applied to study the expansion uniformity of armature in a helical magnetic flux compression generator （HFCG）. The influences of wall thickness and initiation position on the expansion uniformity of armature in HFCG were experimentally investigated. The results show that the armature with thinner wall thickness will easily rupture due to the high pressure of detonation products inside, the armature with larger wall thickness will easily crack due to the tensile stress on the outer surface of the wall, the influence of the end effect on the expansion uniformity can be ignored if the distance between the first group of probe and the initiation point is more than 3 times the armature diameter.展开更多
Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition be...Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.展开更多
基金the National Board for Higher Mathematics(NBHM),DAE,Mumbai,India
文摘In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types： direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations （PDEs） are transformed into non linear self-similar ordinary differential equations （ODEs） by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting.
基金supported by National Natural Science Foundation of China(No.51565040)Science and Technology Planning Project of Jiangxi Province(20151BBE50034,20133BBE50021)Aviation Science Funds of China(2014ZE56016)
文摘In this study,adopting uniform design method established a mathematical model to prepare multi-element active flux. GH4169 superalloy plates were welded by the Nd: YAG laser equipment with the prepared active flux. The results show all kinds of fluxes increase the depth to width ratio and the multi-component systems are more significant. The largest increment of the weld depth to width ratio is 159%,obtained by using of the F12 series flux. It is proved that by using of the active flux to increase the depth to width ratio of micro laser welding is feasible.
文摘This paper describes the application of the variance method for flux estimation over a mixed agricultural region in China. Eddy covariance and flux variance measurements were conducted in a near-surface layer over a non-uniform land surface in the central plain of China from 7 June to 20 July 2002. During this period, the mean canopy height was about 0.50 m. The study site consisted of grass （10% of area）, beans （15%）, corn （15%） and rice （60%）. Under unstable conditions, the standard deviations of temperature and water vapor density （normalized by appropriate scaling parameters）, observed by a single instrument, followed the Monin-Obukhov similarity theory. The similarity constants for heat （CT） and water vapor （Cq） were 1.09 and 1.49, respectively. In comparison with direct measurements using eddy covariance techniques, the flux variance method, on average, underestimated sensible heat flux by 21% and latent heat flux by 24%, which may be attributed to the fact that the observed slight deviations （20% or 30% at most） of the similarity ＂constants＂ may be within the expected range of variation of a single instrument from the generally-valid relations.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 10374061 and 90403028）. We thank Professor Du Meng-Li for some useful suggestions.
文摘A semiclassical method based on the closed-orbit theory is applied to analysing the dynamics of photodetached electron of H- in the parallel electric and magnetic fields. By simply varying the magnetic field we reveal spatial bifurcations of electron orbits at a fixed emission energy, which is referred to as the fold caustic in classical motion. The quantum manifestations of these singularities display a series of intermittent divergences in electronic flux distributions. We introduce semiclassical uniform approximation to repair the electron wavefunctions locally in a mixed phase space and obtain reasonable results. The approximation provides a better treatment of the problem.
基金Sponsored by the Ministerial Level Advanced Research Foundation (40407010305)
文摘A measurement system has been developed based on high-precision printed probes in printed circuit board （PCB） and steep rising-time probe adapters, which can be applied to study the expansion uniformity of armature in a helical magnetic flux compression generator （HFCG）. The influences of wall thickness and initiation position on the expansion uniformity of armature in HFCG were experimentally investigated. The results show that the armature with thinner wall thickness will easily rupture due to the high pressure of detonation products inside, the armature with larger wall thickness will easily crack due to the tensile stress on the outer surface of the wall, the influence of the end effect on the expansion uniformity can be ignored if the distance between the first group of probe and the initiation point is more than 3 times the armature diameter.
基金supported by the National Natural Science Foundation of China (52302292, 52302058, 52302085)the China Postdoctoral Science Foundation (2021M702225)+1 种基金the Anhui Province University Natural Science Research Project (2023AH030093, 2023AH040301)the Startup Research Fund of Chaohu University (KYQD-2023005, KYQD-2023051)。
文摘Composite Li metal anodes based on three-dimensional(3D) porous frameworks have been considered as an effective material for achieving stable Li metal batteries with high energy density.However,uneven Li deposition behavior still occurs at the top of 3D frameworks owing to the local accumulation of Li ions.To promote uniform Li deposition without top dendrite growth,herein,a layered multifunctional framework based on oxidation-treated polyacrylonitrile(OPAN) and metal-organic framework(MOF) derivatives was proposed for rationally regulating the distribution of Li ions flux,nucleation sites,and electrical conductivity.Profiting from these merits,the OPAN/carbon nano fiber-MOF(CMOF) composite framework demonstrated a reversible Li plating/stripping behavior for 500 cycles with a stable Coulombic efficiency of around 99.0% at the current density of 2 mA/cm~2.Besides,such a Li composite anode exhibited a superior cycle lifespan of over 1300 h under a low polarized voltage of 18 mV in symmetrical cells.When the Li composite anode was paired with LiFePO_(4)(LFP) cathode,the obtained full cell exhibited a stable cycling over 500 cycles.Moreover,the COMSOL Multiphysics simulation was conducted to reveal the effects on homogeneous Li ions distribution derived from the above-mentioned OPAN/CMOF framework and electrical insulation/conduction design.These electrochemical and simulated results shed light on the difficulties of designing stable and safe Li metal anode via optimizing the 3D frameworks.
