With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cau...With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cause excessive vibration of the WTT.To investigate the vibration attenuation performance of the WTT under seismic excitations,a novel passive vibration control device,called a prestressed tuned mass damper(PS-TMD),is presented in this study.First,a mathematical model is established based on structural dynamics under seismic excitation.Then,the mathematical analytical expression of the dynamic coefficient is deduced,and the parameter design method is obtained by system tuning optimization.Next,based on a theoretical analysis and parameter design,the numerical results showed that the PS-TMD was able to effectively mitigate the resonance under the harmonic basal acceleration.Finally,the time-history analysis method is used to verify the effectiveness of the traditional pendulum tuned mass damper(PTMD)and the novel PS-TMD device,and the results indicate that the vibration attenuation performance of the PS-TMD is better than the PTMD.In addition,the PS-TMD avoids the nonlinear effect due to the large oscillation angle,and has the potential to dissipate hysteretic energy under seismic excitation.展开更多
Nonlinear time‐history analysis can be used to determine the liquefiable behaviors of the tunnel-sand-pile interaction(TSPI)model with the consideration of sand anisotropy.This study presents the nonlinear response o...Nonlinear time‐history analysis can be used to determine the liquefiable behaviors of the tunnel-sand-pile interaction(TSPI)model with the consideration of sand anisotropy.This study presents the nonlinear response of the TSPI model with the existence of liquefaction under seismic excitation.The analysis reveals that tunnel and pile behave as isotropic elements,while sand shows isotropic,orthotropic,and anisotropic characteristics.Three constitutive models including UBC3D‐PLM(two yield surfaces associated with the hardening rule),NGI‐ADP(yielding with associated plastic potential function),and a user‐specified constitutive model are adopted to evaluate the isotropic,orthotropic,and anisotropic behaviors of sand.On this basis,two finite element‐based codes(ETABS 18.1.1 and Plaxis 3D)are used to evaluate sand behaviors and responses.Responses of the tunnel,sand,pile,and excess pore pressure ratio are recorded in the interaction zone by varying the pile diameter,tunnel diameter,and tunnel-pile clearance.Compared with the orthotropic and isotropic conditions,lower variations of results are found in the anisotropic condition,except for the case of generation of excess pore pressure.In addition,the present reanalysis results are in agreement with previous analytical and case study results,which further indicates the effectiveness of the finite element‐based numerical codes.展开更多
Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility...Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility that considers multi-dimensional performance limit state parameters and makes a first attempt to develop fragility curves for a multi-span continuous (MSC) concrete girder bridge considering two performance limit state parameters: column ductility and transverse deformation in the abutments. The main purpose of this paper is to show that the performance limit states, which are compared with the seismic response parameters in the calculation of fragility, should be properly modeled as randomly interdependent variables instead of deterministic quantities. The sensitivity of fragility curves is also investigated when the dependency between the limit states is different. The results indicate that the proposed method can be used to describe the vulnerable behavior of bridges which are sensitive to multiple response parameters and that the fragility information generated by this method will be more reliable and likely to be implemented into transportation network loss estimation.展开更多
Structures behave multi-directionally when subjected to earthquake excitation. Thus, it is essential to evaluate the effect of multidirectional loading on the dynamic response and seismic performance of reinforced con...Structures behave multi-directionally when subjected to earthquake excitation. Thus, it is essential to evaluate the effect of multidirectional loading on the dynamic response and seismic performance of reinforced concrete bridge columns in order to develop more advanced and reliable design procedures. To investigate such effects, a 1/4 scaled circular reinforced concrete bridge column specimen was tested under two horizontal and one vertical components of a strong motion that has long duration with several strong pulses. Damage progress of reinforced concrete columns subjected to strong excitation was evaluated from the test. The test results demonstrate that the lateral force response in the principal directions become smaller than computed flexural capacity due to the bilateral flexural loading effects, and that the lateral response is not significantly affected by the fluctuation of the axial force because the horizontal response and axial force barely reached the maximum simultaneously due to difference of the predominant natural periods between the vertical and the horizontal directions. Accuracy of fiber analyses is discussed using the test results.展开更多
A finite element model is constructed for a sliding friction bearing in a seismically isolated bridge under vertical excitation with contact/friction elements. The effects of vertical excitation on the seismic perform...A finite element model is constructed for a sliding friction bearing in a seismically isolated bridge under vertical excitation with contact/friction elements. The effects of vertical excitation on the seismic performance of a seismically isolated bridge with sliding friction bearings and different bearing friction coefficients and different stiffness levels (pier diameter) are discussed using example calculations, and the effects of excitation direction for vertical excitation on the analysis results are explored. The analysis results shows that vertical excitation has a relatively large impact on seismic performance for a seismically isolated bridge with sliding friction bearings, which should be considered when designing a seismically isolated bridge with sliding friction bearings where vertical excitation dominates.展开更多
The pseudo excitation method(PEM) has been improved into a more practical form,on which the analytic formulae of seismic response power spectral density(PSD) of simplified large-span structural models have been derive...The pseudo excitation method(PEM) has been improved into a more practical form,on which the analytic formulae of seismic response power spectral density(PSD) of simplified large-span structural models have been derived.The analytic formulae and numerical computing results of seismic response PSD have been derived to study the mechanism of multi-support excitation effects,such as the wave-passage effect and incoherence effect,for the seismic response of multiand large-span structures.By using a multi-span truss as an example,the influence of multi-support excitation effects on the seismic response of such structures is studied.展开更多
In this study,application of the spectral representation method for generation of endurance time excitation functions is introduced.Using this method,the intensifying acceleration time series is generated so that its ...In this study,application of the spectral representation method for generation of endurance time excitation functions is introduced.Using this method,the intensifying acceleration time series is generated so that its acceleration response spectrum in any desired time duration is compatible with a time-scaled predefined acceleration response spectrum.For this purpose,simulated stationary acceleration time series is multiplied by the time dependent linear modulation function,then using a simple iterative scheme,it is forced to match a target acceleration response spectrum.It is shown that the generated samples have excellent conformity in low frequency,which is useful for nonlinear endurance time analysis.In the second part of this study,it is shown that this procedure can be extended to generate a set of spatially correlated endurance time excitation functions.This makes it possible to assess the performance of long structures under multi-support seismic excitation using endurance time analysis.展开更多
The authors would like to thank the discusser for his considerations and comments. The discusser believes that some of the derived formulations need to be referred to his previously published works and also some relat...The authors would like to thank the discusser for his considerations and comments. The discusser believes that some of the derived formulations need to be referred to his previously published works and also some related studies have not been cited.展开更多
Various types of passive control systems have been used to suppress the seismic response of structures in recent years. Among these systems, Tuned Liquid Column Dampers (TLCDs) dissipate the input earthquake energy ...Various types of passive control systems have been used to suppress the seismic response of structures in recent years. Among these systems, Tuned Liquid Column Dampers (TLCDs) dissipate the input earthquake energy by combining the effects of the movement of the liquid mass in the container, the restoring force on the liquid due to the gravity loads and the damping due to the liquid movement through orifices. In this study, the effects of seismic excitation characteristics such as frequency content and soil condition on the seismic performance of TLCDs are investigated using nonlinear time-history analyses. In this regard, among the past earthquake ground motion records of Iran, 16 records with different parameters were selected. In the structural model developed, the attached TLCD is simulated as a Tuned Mass Damper (TMD) having the same vibration period and damping ratio as the original TLCD. The numerical results show that the seismic excitation characteristics have a substantial role on the displacement reduction capability of TLCDs and they should be considered accordingly in the design of TLCDs.展开更多
By combining the time-history response analysis and the eigenvalue buckling analysis, this paper developed a computational procedure to study the elastic dynamic stability of a transmission tower by APDL language in A...By combining the time-history response analysis and the eigenvalue buckling analysis, this paper developed a computational procedure to study the elastic dynamic stability of a transmission tower by APDL language in ANSYS. The influences of different input directions of seismic excitations and damping ratio on the elastic dynamic stability of tower were discussed. The following conclusions were obtained: ( 1 ) Longitudinal direction of the transmission lines is the worst input direction of seismic excitation for the transmission tower. (2) Dead load has no significant effect on the critical load and the occurrence time of buckling. (3) Vertical input of seismic excitations has no great effect on the dynamic stability of the transmission tower. (4) Damping effect has an influence on the dynamic stability of the transmission tower; however, the inherent characteristics of dynamic buckling is not changed.展开更多
This paper presents a wavelet-based approach for estimating the response of the base-isolated structure under seismic ground motions. The seismic ground motion record is expressed as the multi-scale wavelet coefficien...This paper presents a wavelet-based approach for estimating the response of the base-isolated structure under seismic ground motions. The seismic ground motion record is expressed as the multi-scale wavelet coefficients which presents the time frequency characteristics of the seismic excitation. The wavelet domain governing differential equation between the wavelet coefficients of the excitation and response is derived. Numerical study on a one-storey base isolated structure is performed. The result shows that the wavelet based response computation method is of high precision.展开更多
The authors presented an interesting aspect in viscous or visco-elastic damper optimization under earthquake excitation. They also reviewed the research development in the field of passive damper optimization.
Purpose–Under different ground motion excitation modes,the spatial coupling effect of seismic response for the arch bridge with thrust,seismic weak parts and the internal force components of the control section of ma...Purpose–Under different ground motion excitation modes,the spatial coupling effect of seismic response for the arch bridge with thrust,seismic weak parts and the internal force components of the control section of main arch ribs are analyzed.Design/methodology/approach–Taking a 490 m deck type railway steel truss arch bridge as the background,the dynamic calculation model of the whole bridge was established by SAP2000 software.The seismic response analyses under one-,two-and three-dimension(1D,2D and 3D)uniform ground motion excitations were carried out.Findings–For the steel truss arch bridge composed of multiple arch ribs,any single direction ground motion excitation will cause large axial force in the chord of arch rib.The axial force caused by transverse and vertical ground motion excitation in the chord of arch crown area is 1.4–3.6 times of the corresponding axial force under longitudinal seismic excitation.The in-plane bending moment caused by the lower chord at the vault is 4.2–5.5 times of the corresponding bending moment under the longitudinal seismic excitation.For the bottom chord of arch rib,the arch foot is the weak part of earthquake resistance,but for the upper chord of arch rib,the arch foot,arch crown and the intersection of column and upper chord can all be the potential earthquake-resistant weak parts.The normal stress of the bottom chord of the arch rib under multidimensional excitation is mainly caused by the axial force,but the normal stress of the upper chord of the arch rib is caused by the axial force,in-plane and out of plane bending moment.Originality/value–The research provides specific suggestions for ground motion excitation mode and also provides reference information for the earthquake-resistant weak part and seismic design of long-span deck type railway steel truss arch bridges.展开更多
In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a simi...In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a similarity ratio of 1/10 was constructed. An earthquake simulation shaking table test on the response under multiple-support excitations was performed with the high-position seismic isolation method using high damping rubber (HDR) bearings. Small-amplitude sinusoidal waves and seismic wave records with various spectral characteristics were applied to the model. The dynamic characteristics of the model and the seismic isolation eff ect on it were analyzed at varying apparent wave velocities, namely infi nitely great, 1000 m/s, 500 m/s and 250 m/s. Besides, numerical simulations were carried out by Matlab software. According to the comparison results, the numerical results agreed well with the experimental data. Moreover, the results showed that the latticed shell roof exhibited a translational motion as a rigid body after the installation of the HDR bearings with a much lower natural frequency, higher damping ratio and only 1/2~1/8 of the acceleration response peak values. Meanwhile, the structural responses and the bearing deformations at the output end of the seismic waves were greatly increased under multiple-support excitations.展开更多
In this study,a novel rotational damper called a Rotational Friction Viscoelastic Damper(RFVD) is introduced.Some viscoelastic pads are added to the Rotational Friction Damper(RFD) in addition to the friction discs us...In this study,a novel rotational damper called a Rotational Friction Viscoelastic Damper(RFVD) is introduced.Some viscoelastic pads are added to the Rotational Friction Damper(RFD) in addition to the friction discs used in this conventional device.Consequently,the amount of energy dissipated by the damper increases in low excitation frequencies.In fact,the input energy to the structure is simultaneously dissipated in the form of friction and heat by frictional discs and viscoelastic pads.In order to compare the performance of this novel damper with the earlier types,a set of experiments were carried out.According to the test results,the RFVD showed a better performance in dissipating input energy to the structure when compared to the RFD.The seismic behavior of steel frames equipped with these dampers was also numerically evaluated based on a nonlinear time history analysis.The numerical results verifi ed the performance of the dampers in increasing the energy dissipation and decreasing the energy input to the structural elements.In order to achieve the maximum dissipated energy,the dampers need to be installed in certain places called critical points in the structure.An appropriate approach is presented to properly fi nd these points.Finally,the performance of the RFVDs installed at these critical points was investigated in comparison to some other confi gurations and the validity of the suggested method in increasing the energy dissipation was confi rmed.展开更多
Mode superposition is a widely used method for solving the dynamic equilibrium equation in structural dynamic analysis.However,the accuracy of this method may be reduced when the dynamic equilibrium equations are set ...Mode superposition is a widely used method for solving the dynamic equilibrium equation in structural dynamic analysis.However,the accuracy of this method may be reduced when the dynamic equilibrium equations are set up using displacement excitation.A new method for developing solutions for dynamic equilibrium equations based on displacement excitation is introduced.The dynamic equilibrium equation is decomposed into two parts,namely displacement excitation and velocity excitation,and precise integration and mode superposition methods are combined to solve the equation.Ritz vectors are then used to calculate the static response of the truncated modes of the structure,and a method for determining the number of participating modes is obtained.Using multi-degree-of-freedom systems as two computational examples,the differences in the structural responses obtained from the displacement excitation and acceleration excitation are compared and analyzed.It is shown that the new solution method generates consistent accuracy between the displacement excitation and acceleration excitation.展开更多
The measurement of underground medium variation using a repeated artificial source has gradually become an important goal to pursue. In recent years,we have developed and improved a technology system with large capaci...The measurement of underground medium variation using a repeated artificial source has gradually become an important goal to pursue. In recent years,we have developed and improved a technology system with large capacity airguns excited in land reservoirs by transplanting marine seismic exploration technology. The excitation effect has a close relationship to airgun capacity,water environment,and excitation conditions. In view that large capacity airgun must be excited without a water environment,we expand the system to use in downhole. Based on the BHS-2200 LL downhole airgun with a capacity of250in3,this paper carries out a comparative analysis on the characteristics of an airgun source excited in 0. 2m- and 5. 0m-diameter wells,and the results show that:( 1) The dominant frequency of the airgun signal excited in a 5. 0m well is mainly from 10 Hz to40Hz,lower than that in a 0. 2m well,and the larger body of water is good for bubble oscillation.( 2) In terms of exciting energy,the signal excited in a 5. 0m well has stronger energy than in a 0. 2m well,with a difference of 1 order in magnitude,and the signal can be detected up to 9km excited in a 5. 0m well with a single shot.( 3) The airgun signal has good repeatability in both excitation wells. The downhole airgun excitation technology system has potential application in dynamic monitoring near a fault zone with a small scale range, exploration of oil and mineral resources, and modern urban geophysical environment.展开更多
When evaluating the seismic safety and reliability of complex engineering structures,it is a critical problem to reasonably consider the randomness and multi-dimensional nature of ground motions.To this end,a proposed...When evaluating the seismic safety and reliability of complex engineering structures,it is a critical problem to reasonably consider the randomness and multi-dimensional nature of ground motions.To this end,a proposed modeling strategy of multi-dimensional stochastic earthquakes is addressed in this study.This improved seismic model has several merits that enable it to better provide seismic analyses of structures.Specifically,at first,the ground motion model is compatible with the design response spectrum.Secondly,the evolutionary power spectrum involved in the model and the design response spectrum are constructed accordingly with sufficient consideration of the correlation between different seismic components.Thirdly,the random function-based dimension-reduction representation is applied,by which seismic modeling is established,with three elementary random variables.Numerical simulations of multi-dimensional stochastic ground motions in a specific design scenario indicate the effectiveness of the proposed modeling strategy.Moreover,the multi-dimensional seismic response and the global reliability of a high-rise frame-core tube structure is discussed in detail to further illustrate the engineering applicability of the proposed method.The analytical investigations demonstrate that the suggested stochastic model of multi-dimensional ground motion is available for accurate seismic response analysis and dynamic reliability assessment of complex engineering structures for performance-based seismic resistance design.展开更多
基金Fundamental Research Funds for the National Natural Science Foundation of China under Grant No.52078084the Natural Science Foundation of Chongqing (cstc2021jcyj-msxmX0623)+2 种基金the 111 project of the Ministry of Educationthe Bureau of Foreign Experts of China under Grant No.B18062China Postdoctoral Science Foundation under Grant No.2021M690838。
文摘With the rapid development of large megawatt wind turbines,the operation environment of wind turbine towers(WTTs)has become increasingly complex.In particular,seismic excitation can create a resonance response and cause excessive vibration of the WTT.To investigate the vibration attenuation performance of the WTT under seismic excitations,a novel passive vibration control device,called a prestressed tuned mass damper(PS-TMD),is presented in this study.First,a mathematical model is established based on structural dynamics under seismic excitation.Then,the mathematical analytical expression of the dynamic coefficient is deduced,and the parameter design method is obtained by system tuning optimization.Next,based on a theoretical analysis and parameter design,the numerical results showed that the PS-TMD was able to effectively mitigate the resonance under the harmonic basal acceleration.Finally,the time-history analysis method is used to verify the effectiveness of the traditional pendulum tuned mass damper(PTMD)and the novel PS-TMD device,and the results indicate that the vibration attenuation performance of the PS-TMD is better than the PTMD.In addition,the PS-TMD avoids the nonlinear effect due to the large oscillation angle,and has the potential to dissipate hysteretic energy under seismic excitation.
文摘Nonlinear time‐history analysis can be used to determine the liquefiable behaviors of the tunnel-sand-pile interaction(TSPI)model with the consideration of sand anisotropy.This study presents the nonlinear response of the TSPI model with the existence of liquefaction under seismic excitation.The analysis reveals that tunnel and pile behave as isotropic elements,while sand shows isotropic,orthotropic,and anisotropic characteristics.Three constitutive models including UBC3D‐PLM(two yield surfaces associated with the hardening rule),NGI‐ADP(yielding with associated plastic potential function),and a user‐specified constitutive model are adopted to evaluate the isotropic,orthotropic,and anisotropic behaviors of sand.On this basis,two finite element‐based codes(ETABS 18.1.1 and Plaxis 3D)are used to evaluate sand behaviors and responses.Responses of the tunnel,sand,pile,and excess pore pressure ratio are recorded in the interaction zone by varying the pile diameter,tunnel diameter,and tunnel-pile clearance.Compared with the orthotropic and isotropic conditions,lower variations of results are found in the anisotropic condition,except for the case of generation of excess pore pressure.In addition,the present reanalysis results are in agreement with previous analytical and case study results,which further indicates the effectiveness of the finite element‐based numerical codes.
基金National Natural Science Foundation of China Under Award Number 50878184National High Technology Research and Development Program (863 Program) of China Under Grant No. 2006AA04Z437Graduate Starting Seed Fund of Northwestern Polytechnical University Under the Grant No. Z2012059
文摘Fragility analysis for highway bridges has become increasingly important in the risk assessment of highway transportation networks exposed to seismic hazards. This study introduces a methodology to calculate fragility that considers multi-dimensional performance limit state parameters and makes a first attempt to develop fragility curves for a multi-span continuous (MSC) concrete girder bridge considering two performance limit state parameters: column ductility and transverse deformation in the abutments. The main purpose of this paper is to show that the performance limit states, which are compared with the seismic response parameters in the calculation of fragility, should be properly modeled as randomly interdependent variables instead of deterministic quantities. The sensitivity of fragility curves is also investigated when the dependency between the limit states is different. The results indicate that the proposed method can be used to describe the vulnerable behavior of bridges which are sensitive to multiple response parameters and that the fragility information generated by this method will be more reliable and likely to be implemented into transportation network loss estimation.
基金NEES/E-Defense Collaboration ResearchProjects for Bridges of the National Research Institute forEarth Science and Disaster Prevention (NIED), Japan.
文摘Structures behave multi-directionally when subjected to earthquake excitation. Thus, it is essential to evaluate the effect of multidirectional loading on the dynamic response and seismic performance of reinforced concrete bridge columns in order to develop more advanced and reliable design procedures. To investigate such effects, a 1/4 scaled circular reinforced concrete bridge column specimen was tested under two horizontal and one vertical components of a strong motion that has long duration with several strong pulses. Damage progress of reinforced concrete columns subjected to strong excitation was evaluated from the test. The test results demonstrate that the lateral force response in the principal directions become smaller than computed flexural capacity due to the bilateral flexural loading effects, and that the lateral response is not significantly affected by the fluctuation of the axial force because the horizontal response and axial force barely reached the maximum simultaneously due to difference of the predominant natural periods between the vertical and the horizontal directions. Accuracy of fiber analyses is discussed using the test results.
基金National Natural Science Foundation of China under Grant Nos.51368036 and 51108220
文摘A finite element model is constructed for a sliding friction bearing in a seismically isolated bridge under vertical excitation with contact/friction elements. The effects of vertical excitation on the seismic performance of a seismically isolated bridge with sliding friction bearings and different bearing friction coefficients and different stiffness levels (pier diameter) are discussed using example calculations, and the effects of excitation direction for vertical excitation on the analysis results are explored. The analysis results shows that vertical excitation has a relatively large impact on seismic performance for a seismically isolated bridge with sliding friction bearings, which should be considered when designing a seismically isolated bridge with sliding friction bearings where vertical excitation dominates.
基金National Natural Science Foundation of China under Grant No.51038006Specializes Research Fund for the Doctoral Program of Higher Education under Grant No.20090002110045
文摘The pseudo excitation method(PEM) has been improved into a more practical form,on which the analytic formulae of seismic response power spectral density(PSD) of simplified large-span structural models have been derived.The analytic formulae and numerical computing results of seismic response PSD have been derived to study the mechanism of multi-support excitation effects,such as the wave-passage effect and incoherence effect,for the seismic response of multiand large-span structures.By using a multi-span truss as an example,the influence of multi-support excitation effects on the seismic response of such structures is studied.
文摘In this study,application of the spectral representation method for generation of endurance time excitation functions is introduced.Using this method,the intensifying acceleration time series is generated so that its acceleration response spectrum in any desired time duration is compatible with a time-scaled predefined acceleration response spectrum.For this purpose,simulated stationary acceleration time series is multiplied by the time dependent linear modulation function,then using a simple iterative scheme,it is forced to match a target acceleration response spectrum.It is shown that the generated samples have excellent conformity in low frequency,which is useful for nonlinear endurance time analysis.In the second part of this study,it is shown that this procedure can be extended to generate a set of spatially correlated endurance time excitation functions.This makes it possible to assess the performance of long structures under multi-support seismic excitation using endurance time analysis.
文摘The authors would like to thank the discusser for his considerations and comments. The discusser believes that some of the derived formulations need to be referred to his previously published works and also some related studies have not been cited.
文摘Various types of passive control systems have been used to suppress the seismic response of structures in recent years. Among these systems, Tuned Liquid Column Dampers (TLCDs) dissipate the input earthquake energy by combining the effects of the movement of the liquid mass in the container, the restoring force on the liquid due to the gravity loads and the damping due to the liquid movement through orifices. In this study, the effects of seismic excitation characteristics such as frequency content and soil condition on the seismic performance of TLCDs are investigated using nonlinear time-history analyses. In this regard, among the past earthquake ground motion records of Iran, 16 records with different parameters were selected. In the structural model developed, the attached TLCD is simulated as a Tuned Mass Damper (TMD) having the same vibration period and damping ratio as the original TLCD. The numerical results show that the seismic excitation characteristics have a substantial role on the displacement reduction capability of TLCDs and they should be considered accordingly in the design of TLCDs.
基金The National Natural Science Foundation of China (No.50878093)
文摘By combining the time-history response analysis and the eigenvalue buckling analysis, this paper developed a computational procedure to study the elastic dynamic stability of a transmission tower by APDL language in ANSYS. The influences of different input directions of seismic excitations and damping ratio on the elastic dynamic stability of tower were discussed. The following conclusions were obtained: ( 1 ) Longitudinal direction of the transmission lines is the worst input direction of seismic excitation for the transmission tower. (2) Dead load has no significant effect on the critical load and the occurrence time of buckling. (3) Vertical input of seismic excitations has no great effect on the dynamic stability of the transmission tower. (4) Damping effect has an influence on the dynamic stability of the transmission tower; however, the inherent characteristics of dynamic buckling is not changed.
文摘This paper presents a wavelet-based approach for estimating the response of the base-isolated structure under seismic ground motions. The seismic ground motion record is expressed as the multi-scale wavelet coefficients which presents the time frequency characteristics of the seismic excitation. The wavelet domain governing differential equation between the wavelet coefficients of the excitation and response is derived. Numerical study on a one-storey base isolated structure is performed. The result shows that the wavelet based response computation method is of high precision.
文摘The authors presented an interesting aspect in viscous or visco-elastic damper optimization under earthquake excitation. They also reviewed the research development in the field of passive damper optimization.
基金supported by the National Natural Science Foundation of China(Grant No.51768037)“Foundation of A Hundred Youth Talents Training Program of Lanzhou Jiaotong University.”。
文摘Purpose–Under different ground motion excitation modes,the spatial coupling effect of seismic response for the arch bridge with thrust,seismic weak parts and the internal force components of the control section of main arch ribs are analyzed.Design/methodology/approach–Taking a 490 m deck type railway steel truss arch bridge as the background,the dynamic calculation model of the whole bridge was established by SAP2000 software.The seismic response analyses under one-,two-and three-dimension(1D,2D and 3D)uniform ground motion excitations were carried out.Findings–For the steel truss arch bridge composed of multiple arch ribs,any single direction ground motion excitation will cause large axial force in the chord of arch rib.The axial force caused by transverse and vertical ground motion excitation in the chord of arch crown area is 1.4–3.6 times of the corresponding axial force under longitudinal seismic excitation.The in-plane bending moment caused by the lower chord at the vault is 4.2–5.5 times of the corresponding bending moment under the longitudinal seismic excitation.For the bottom chord of arch rib,the arch foot is the weak part of earthquake resistance,but for the upper chord of arch rib,the arch foot,arch crown and the intersection of column and upper chord can all be the potential earthquake-resistant weak parts.The normal stress of the bottom chord of the arch rib under multidimensional excitation is mainly caused by the axial force,but the normal stress of the upper chord of the arch rib is caused by the axial force,in-plane and out of plane bending moment.Originality/value–The research provides specific suggestions for ground motion excitation mode and also provides reference information for the earthquake-resistant weak part and seismic design of long-span deck type railway steel truss arch bridges.
基金National Natural Science Foundation of China under Grant No.51278008the National Key Research and Development Plan of China under Grant No.2016YFC0701103
文摘In order to study the infl uence of the ground motion spatial eff ect on the seismic response of large span spatial structures with isolation bearings, a single-layer cylindrical latticed shell scale model with a similarity ratio of 1/10 was constructed. An earthquake simulation shaking table test on the response under multiple-support excitations was performed with the high-position seismic isolation method using high damping rubber (HDR) bearings. Small-amplitude sinusoidal waves and seismic wave records with various spectral characteristics were applied to the model. The dynamic characteristics of the model and the seismic isolation eff ect on it were analyzed at varying apparent wave velocities, namely infi nitely great, 1000 m/s, 500 m/s and 250 m/s. Besides, numerical simulations were carried out by Matlab software. According to the comparison results, the numerical results agreed well with the experimental data. Moreover, the results showed that the latticed shell roof exhibited a translational motion as a rigid body after the installation of the HDR bearings with a much lower natural frequency, higher damping ratio and only 1/2~1/8 of the acceleration response peak values. Meanwhile, the structural responses and the bearing deformations at the output end of the seismic waves were greatly increased under multiple-support excitations.
文摘In this study,a novel rotational damper called a Rotational Friction Viscoelastic Damper(RFVD) is introduced.Some viscoelastic pads are added to the Rotational Friction Damper(RFD) in addition to the friction discs used in this conventional device.Consequently,the amount of energy dissipated by the damper increases in low excitation frequencies.In fact,the input energy to the structure is simultaneously dissipated in the form of friction and heat by frictional discs and viscoelastic pads.In order to compare the performance of this novel damper with the earlier types,a set of experiments were carried out.According to the test results,the RFVD showed a better performance in dissipating input energy to the structure when compared to the RFD.The seismic behavior of steel frames equipped with these dampers was also numerically evaluated based on a nonlinear time history analysis.The numerical results verifi ed the performance of the dampers in increasing the energy dissipation and decreasing the energy input to the structural elements.In order to achieve the maximum dissipated energy,the dampers need to be installed in certain places called critical points in the structure.An appropriate approach is presented to properly fi nd these points.Finally,the performance of the RFVDs installed at these critical points was investigated in comparison to some other confi gurations and the validity of the suggested method in increasing the energy dissipation was confi rmed.
基金National Natural Science Foundation of China under Grant No.51768065Applied Technology Research and Development Plan of Heilongjiang Province(National Project funded by Province under Grant No.GX16C007)。
文摘Mode superposition is a widely used method for solving the dynamic equilibrium equation in structural dynamic analysis.However,the accuracy of this method may be reduced when the dynamic equilibrium equations are set up using displacement excitation.A new method for developing solutions for dynamic equilibrium equations based on displacement excitation is introduced.The dynamic equilibrium equation is decomposed into two parts,namely displacement excitation and velocity excitation,and precise integration and mode superposition methods are combined to solve the equation.Ritz vectors are then used to calculate the static response of the truncated modes of the structure,and a method for determining the number of participating modes is obtained.Using multi-degree-of-freedom systems as two computational examples,the differences in the structural responses obtained from the displacement excitation and acceleration excitation are compared and analyzed.It is shown that the new solution method generates consistent accuracy between the displacement excitation and acceleration excitation.
基金jointly funded by the Natural Science Foundation of China(41204047,41574052)Academician Chen Yong Workstation Project of Yunnan Province
文摘The measurement of underground medium variation using a repeated artificial source has gradually become an important goal to pursue. In recent years,we have developed and improved a technology system with large capacity airguns excited in land reservoirs by transplanting marine seismic exploration technology. The excitation effect has a close relationship to airgun capacity,water environment,and excitation conditions. In view that large capacity airgun must be excited without a water environment,we expand the system to use in downhole. Based on the BHS-2200 LL downhole airgun with a capacity of250in3,this paper carries out a comparative analysis on the characteristics of an airgun source excited in 0. 2m- and 5. 0m-diameter wells,and the results show that:( 1) The dominant frequency of the airgun signal excited in a 5. 0m well is mainly from 10 Hz to40Hz,lower than that in a 0. 2m well,and the larger body of water is good for bubble oscillation.( 2) In terms of exciting energy,the signal excited in a 5. 0m well has stronger energy than in a 0. 2m well,with a difference of 1 order in magnitude,and the signal can be detected up to 9km excited in a 5. 0m well with a single shot.( 3) The airgun signal has good repeatability in both excitation wells. The downhole airgun excitation technology system has potential application in dynamic monitoring near a fault zone with a small scale range, exploration of oil and mineral resources, and modern urban geophysical environment.
基金National Natural Science Foundation of China under Grant Nos.51978543,52108444,and 51778343Plan of Outstanding Young and Middle-aged Scientific and Technological Innovation Team in the Universities of Hubei Province with Project No.T2020010Natural Science Foundation of Hebei Province under Grant No.E2021512001。
文摘When evaluating the seismic safety and reliability of complex engineering structures,it is a critical problem to reasonably consider the randomness and multi-dimensional nature of ground motions.To this end,a proposed modeling strategy of multi-dimensional stochastic earthquakes is addressed in this study.This improved seismic model has several merits that enable it to better provide seismic analyses of structures.Specifically,at first,the ground motion model is compatible with the design response spectrum.Secondly,the evolutionary power spectrum involved in the model and the design response spectrum are constructed accordingly with sufficient consideration of the correlation between different seismic components.Thirdly,the random function-based dimension-reduction representation is applied,by which seismic modeling is established,with three elementary random variables.Numerical simulations of multi-dimensional stochastic ground motions in a specific design scenario indicate the effectiveness of the proposed modeling strategy.Moreover,the multi-dimensional seismic response and the global reliability of a high-rise frame-core tube structure is discussed in detail to further illustrate the engineering applicability of the proposed method.The analytical investigations demonstrate that the suggested stochastic model of multi-dimensional ground motion is available for accurate seismic response analysis and dynamic reliability assessment of complex engineering structures for performance-based seismic resistance design.