A novel method for determining the resistivity of compressed superconducting materials

The measurement of resistivity in a compressed material within a diamond anvil cell presents significant challenges.The high-pressure exper-imental setup makes it difficult to directly measure the size changes induced by pressure in the three crystallographic directions of the sample.In this study,we introduce a novel and effective method that addresses these technical challenges.This method is anticipated to offer a valuable foundation for high-pressure investigations on quantum materials,particularly those with anisotropic layered structures.

Application of the Electrical Resistivity Method in Precision Agriculture of Coffee Cultivation, in the Kabiri Area, Ícolo e Bengo Township, Luanda, Angola

The electrical resistivity method is a geophysical tool used to characterize the subsoil and can provide an important information for precision agriculture. The lack of knowledge about agronomic properties of the soil tends to affect the agricultural coffee production system. Therefore, research related to geoelectrical properties of soil such as resistivity for characterization the region of the study for coffee cultivation purposes can improve and optimize the production. This resistivity method allows to investigate the subsurface through different techniques: 1D vertical electrical sounding and electrical imaging. The acquisition of data using these techniques permitted the creation of 2D resistivity cross section from the study area. The geoelectrical data was acquired by using a resistivity meter equipment and was processed in different softwares. The results of the geoelectrical characterization from 1D resistivity model and 2D resistivity electrical sections show that in the study area of Kabiri, there are 8 varieties of geoelectrical layers with different resistivity or conductivity. Near survey in the study area, the lowest resistivity is around 0.322 Ω·m, while the highest is about 92.1 Ω·m. These values illustrated where is possible to plant coffee for suggestion of specific fertilization plan for some area to improve the cultivation.

A Provable Positivity-Preserving Local Discontinuous Galerkin Method for the Viscous and Resistive MHD Equations

In this paper,we construct a high-order discontinuous Galerkin(DG)method which can preserve the positivity of the density and the pressure for the viscous and resistive magnetohydrodynamics(VRMHD).To control the divergence error in the magnetic field,both the local divergence-free basis and the Godunov source term would be employed for the multi-dimensional VRMHD.Rigorous theoretical analyses are presented for one-dimensional and multi-dimensional DG schemes,respectively,showing that the scheme can maintain the positivity-preserving(PP)property under some CFL conditions when combined with the strong-stability-preserving time discretization.Then,general frameworks are established to construct the PP limiter for arbitrary order of accuracy DG schemes.Numerical tests demonstrate the effectiveness of the proposed schemes.

Research and Application of High-Density Resistivity Method in Seawater Intrusion Investigation in Laizhou Bay

The disaster of seawater intrusion seriously affects people's lives and restricts economic development,so the detection and treatment of seawater intrusion is a long-term task.On the basis of field investigation and water quality analysis,according to the change characteristics of apparent resistivity of groundwater after Cl-reaches 250 mg/L,the theoretical basis for the application of high-density resistivity method was determined,and the characteristic values of apparent resistivity for seawater intrusion interfaces in different geological characteristic regions in Laizhou Bay area were determined by typical profile tests.Combined with water quality investigation and other means,profiles for the high-density resistivity method were arranged,and the interfaces between saline and fresh water were accurately divided.

Numerical simulation research on multi-electrodes resistivity imaging survey array

Multi-electrodes Resistivity Imaging Survey(MRIS)is an array method of electrical survey.In practice how to choose a reasonable array is the key to get reliable survey results.Based on four methods of MRIS such as Wenner,Schlumberger,Pole-pole and Dipole-dipole the authors established the model,by studying the result of the forward numerical simulation modeling and inverse modeling,and analyzed the differences among the different forms of detection devices.

Three-dimensional forward modeling of DC resistivity using the aggregation-based algebraic multigrid method

To speed up three-dimensional （3D） DC resistivity modeling, we present a new multigrid method, the aggregation-based algebraic multigrid method （AGMG）. We first discretize the differential equation of the secondary potential field with mixed boundary conditions by using a seven-point finite-difference method to obtain a large sparse system of linear equations. Then, we introduce the theory behind the pairwise aggregation algorithms for AGMG and use the conjugate-gradient method with the V-cycle AGMG preconditioner （AGMG-CG） to solve the linear equations. We use typical geoelectrical models to test the proposed AGMG-CG method and compare the results with analytical solutions and the 3DDCXH algorithm for 3D DC modeling （3DDCXH）. In addition, we apply the AGMG-CG method to different grid sizes and geoelectrical models and compare it to different iterative methods, such as ILU-BICGSTAB, ILU-GCR, and SSOR-CG. The AGMG-CG method yields nearly linearly decreasing errors, whereas the number of iterations increases slowly with increasing grid size. The AGMG-CG method is precise and converges fast, and thus can improve the computational efficiency in forward modeling of three-dimensional DC resistivity.

Forward modeling of marine DC resistivity method for a layered anisotropic earth

Since the ocean bottom is a sedimentary environment wherein stratification is well developed, the use of an anisotropic model is best for studying its geology. Beginning with Maxwell＇s equations for an anisotropic model, we introduce scalar potentials based on the divergence-free characteristic of the electric and magnetic （EM） fields. We then continue the EM fields down into the deep earth and upward into the seawater and couple them at the ocean bottom to the transmitting source. By studying both the DC apparent resistivity curves and their polar plots, we can resolve the anisotropy of the ocean bottom. Forward modeling of a high-resistivity thin layer in an anisotropic half-space demonstrates that the marine DC resistivity method in shallow water is very sensitive to the resistive reservoir but is not influenced by airwaves. As such, it is very suitable for oil and gas exploration in shallowwater areas but, to date, most modeling algorithms for studying marine DC resistivity are based on isotropic models. In this paper, we investigate one-dimensional anisotropic forward modeling for marine DC resistivity method, prove the algorithm to have high accuracy, and thus provide a theoretical basis for 2D and 3D forward modeling.

Mapping coalmine goaf using transient electromagnetic method and high density resistivity method in Ordos City, China

The research about subsurface characteristics by using transient electromagnetic method（TEM） and high density resistivity method（HDRM） were already conducted in Ordos. The objective of this research is to detect coalmine goaf areas based on rock resistivity. The data processing using wavelet transform, three point smoothing, RES2 DINV and Maxwell processing software to obtain 2D resistivity structure. The results showed that the layers with maximum resistivity values（30e33 U m on Line 1, 30e31 U m on Line 2, 32e40 U m on Line3） are founded at station 1e7, and 14e20 on Line 1,13e18 on Line 2, and 8e13 and 16e20 on Line 3 which is predicted as goaf layer, and the minimum resistivity values（20e26 U m of TEM, 45e75 U m of HDRM） at the other layers. This resistivity difference was caused by the geology and characteristics of the study area which is located close by the cleugh with rich coal, so the goaf area distinguishable with aquifer layer and coal seam. The results were also significant accidents and serious destruction of ecological environment.

Hyperbolic Method to Analyze the Electrical Resistivity Curve of Portland Cements with Superplasticizer

Electrical measurement was employed to investigate the early hydration characteristics of cement pastes with different dosages of superplasticizer in the same W/C ratio. The hyperbolic method was applied to analyze the electrical resistivity development. The peak point （Ph） on the hyperbolic curve could be easily read. The time （th） to reach the point Ph had strong relations with the setting time. th was delayed with the increment of the dosage of superplasticizer. The time th was used to plot the relationship between the initial setting time and final setting time. The hyperbolic equation was established to predict the ultimate resistivity. The retardation effect of the superplasticizer was confirmed in the same W/C ratio by setting time and isothermal heat evolution.

Resistivity measurement of conductive asphalt concrete based on two-electrode method

The objective of this work is to develop a novel methodology for determining real resistivity of conductive asphalt concrete based on two-electrode method.Due to an influence of contact resistance,the measured resistivity is always not equal to the real resistivity.To determine the real resistivity,a linear relationship of the measured resistivity,contact resistance and the real resistivity was established.Then experiments for six specimens with varying graphite contents were designed and performed to validate the formulation.Results of experiments demonstrate that the slope of the line represents contact resistance,and the intercept indicates the real resistivity.The effects of graphite content on contact resistance and real resistivity are also revealed.Finally,results show that the influence of contact resistance on accuracy of resisitvity measurement becomes more serious if graphite content is beyond 3%.Hence,it is the time to choose this novel methodology to determine the real resistivity of asphalt concrete by taking account of contact resistance.

Testing with high density resistivity method in prevention and cure for mine water disaster and its applied effect

The detecting examples using the high density resistivity method, about the evaluation of containing water characteristic from the floor rock and the height of overburden failure, were given. It expresses that the high density resistivity method has good effect with strong maneuverability and continuous observing section during the prevention and cure for mine water disaster. At the same time, the article pointed out that the study of space data inversion and dynamic watching technology about the high density resistivity method must be enhanced in the future because of special condition of data collecting in mine.

Early Age Compressive Strength of Pastes by Electrical Resistivity Method and Maturity Method

The compressive strength development of Portland cement pastes was investigated by the electrical resistivity method and the maturity method.The experiments were carried out on the cement pastes with different water-cement ratios at different curing temperatures.The results show that the application of the maturity method has limitation to obtain the strength.It is found that both of the compressive strength and the electrical resistivity follow hyperbolic trend for all the mixes.The hyperbolic equation of each mix is obtained to estimate the ultimate resistivity value which can probably be reached.The relationship between electrical resistivity and compressive strength of the cement pastes is established based on the test results and interpreted by the empirical Archie equation and a strength-porosity equation.The relationship between the electrical resistivity after temperature correction and the compressive strength was linear and independent of curing temperature and water-cement ratio.

Calculation of all-time apparent resistivity of large loop transient electromagnetic method with very fast simulated annealing

In large loop transient electromagnetic method(TEM),the late time apparent resistivity formula cannot truly reflect the geoelectric model,thus it needs to define the all-time apparent resistivity with the position information of measuring point.Utilizing very fast simulated annealing(VFSA) to fit the theoretical electromagnetic force(EMF) and measured EMF could obtain the all-time apparent resistivity of the measuring points in rectangular transmitting loop.The selective cope of initial model of VFSA could be confirmed by taking the late time apparent resistivity of transient electromagnetic method as the prior information.For verifying the correctness,the all-time apparent resistivities of the geoelectric models were calculated by VFSA and dichotomy,respectively.The results indicate that the relative differences of apparent resistivities calculated by these two methods are within 3%.The change of measuring point position has little influence on the tracing pattern of all-time apparent resistivity.The first branch of the curve of all-time apparent resistivity is close to the resistivity of the first layer medium and the last branch is close to the resistivity of the last layer medium,which proves the correctness of the arithmetics proposed.

Multiple linear system techniques for 3D finite element method modeling of direct current resistivity

The strategies that minimize the overall solution time of multiple linear systems in 3D finite element method (FEM) modeling of direct current (DC) resistivity were discussed. A global stiff matrix is assembled and stored in two parts separately. One part is associated with the volume integral and the other is associated with the subsurface boundary integral. The equivalent multiple linear systems with closer right-hand sides than the original systems were constructed. A recycling Krylov subspace technique was employed to solve the multiple linear systems. The solution of the seed system was used as an initial guess for the subsequent systems. The results of two numerical experiments show that the improved algorithm reduces the iterations and CPU time by almost 50%, compared with the classical preconditioned conjugate gradient method.

Establishment and Application of Identification Methods for Resistance to Sugarcane White Leaf Disease(SCWL)

[Objectives]This study was conducted to establish simple, efficient, stable, standardized and practical identification methods for sugarcane resistance to white leaf disease(SCWL), and promote the breeding for sugarcane resistance to SCWL. [Methods]The identification technology of sugarcane resistance to SCWL was systematically studied and explored from the aspects of sugarcane material treatment and planting, inoculation liquid preparation, inoculation method, disease investigation, grading standard formulation, etc., and two sets of simple, efficient, stable, standardized and practical accurate identification methods for sugarcane resistance to SCWL were created for the first time, namely, the seed cane coating inoculation method and the stem-cutting inoculation method at the growth stage. The seed cane coating inoculation method includes the steps of directly screening SCWL phytoplasma, extracting juice from cane and adding 10 times of sterile water to prepare an inoculation liquid, spraying seed cane on plastic film to keep moisture, planting the inoculated materials in barrels in an insect-proof greenhouse for cultivation, investigating the incidence rate 30 d after inoculation, and evaluating the disease resistance according to the 1-5 level standard. The method of stem-cutting inoculation includes the steps of directly screening sugarcane stems carrying SCWL phytoplasma and adding 10 times of sterile water to prepare an inoculation liquid, cultivating the identification materials in an insect-proof greenhouse, dropping 100 μl of the inoculation liquid into each root incision with a pipette gun at the age of 6 months, investigating the incidence rate 20 d after planting, and evaluating the disease resistance according to the 1-5 level standard. [Results] The two methods are similar to the natural transmission method. After inoculation, SCML occurred significantly, with high sensitivity and good reproducibility. The results of resistance identification were consistent with those of natural disease in the field. Through the two inoculation methods and field natural disease investigation, the resistance of 10 main cultivars to SCML was identified, which was true and reliable. [Conclusions] This study can provide standard varieties for identification of SCML resistance in the future.

Application of high-density resistivity method to evaluate safety around Minyan Tunnel,Helong City

By determining the distribution and extent of geological structures surrounding the Mingyan Tunnel,Xicheng Town,Helong City,Jilin Province,we can evaluate the stability of the rock mass and assess potential hazards during tunnel construction.We use the high-density resistivity method to analyze the subsurface structure of the study area.Conductive anomalies are likely to represent joint and fissure systems within strongly weathered host rocks,and the bedrock surrounding the tunnel is relatively stable and does not contain well-developed faults.High-density resistivity analysis can provide valuable information in the context of tunnel engineering and safety.

Viability of high-density resistivity method for evaluating mountain slope stability in Erdaojiang District,Tonghua City,China

The authors employ the high-density resistivity method to image the subsurface structure of a mountain in Erdaojiang District,Tonghua City,Jilin Province,China,to evaluate the potential risk of slope failure on surrounding residential areas and infrastructure,and identify a shallow fault that extends across the center of the mountain and is perpendicular to the mountain slope and accurately locate the spatial position and depth of another fault on the southern side of the mountain.The results provide an important basis for evaluating mountain slope stability.This study also demonstrates that the high-density resistivity method is effective for detecting mountain faults.

Nonlinear Inversion for Complex Resistivity Method Based on QPSO-BP Algorithm

The significant advantage of the complex resistivity method is to reflect the abnormal body through multi-parameters, but its inversion parameters are more than the resistivity tomography method. Therefore, how to effectively invert these spectral parameters has become the focused area of the complex resistivity inversion. An optimized BP neural network (BPNN) approach based on Quantum Particle Swarm Optimization (QPSO) algorithm was presented, which was able to improve global search ability for complex resistivity multi-parameter nonlinear inversion. In the proposed method, the nonlinear weight adjustment strategy and mutation operator were used to enhance the optimization ability of QPSO algorithm. Implementation of proposed QPSO-BPNN was given, the network had 56 hidden neurons in two hidden layers (the first hidden layer has 46 neurons and the second hidden layer has 10 neurons) and it was trained on 48 datasets and tested on another 5 synthetic datasets. The training and test results show that BP neural network optimized by the QPSO algorithm performs better than the BP neural network without initial optimization on the inversion training and test models, and the mean square error distribution is better. At the same time, a double polarized anomalous bodies model was also used to verify the feasibility and effectiveness of the proposed method, the inversion results show that the QPSO-BP algorithm inversion clearly characterizes the anomalous boundaries and is closer to the values of the parameters.

Obtaining 2D Soil Resistance Profiles from the Integration of Electrical Resistivity Data and Standard Penetration Test (SPT) and Light Dynamic Penetrometer (DPL) Resistance Tests—Applications in Mass Movements Studies

In Brazil and various regions globally, the initiation of landslides is frequently associated with rainfall;yet the spatial arrangement of geological structures and stratification considerably influences landslide occurrences. The multifaceted nature of these influences makes the surveillance of mass movements a highly intricate task, requiring an understanding of numerous interdependent variables. Recent years have seen an emergence in scholarly research aimed at integrating geophysical and geotechnical methodologies. The conjoint examination of geophysical and geotechnical data offers an enhanced perspective into subsurface structures. Within this work, a methodology is proposed for the synchronous analysis of electrical resistivity geophysical data and geotechnical data, specifically those extracted from the Light Dynamic Penetrometer (DPL) and Standard Penetration Test (SPT). This study involved a linear fitting process to correlate resistivity with N10/SPT N-values from DPL/SPT soundings, culminating in a 2D profile of N10/SPT N-values predicated on electrical profiles. The findings of this research furnish invaluable insights into slope stability by allowing for a two-dimensional representation of penetration resistance properties. Through the synthesis of geophysical and geotechnical data, this project aims to augment the comprehension of subsurface conditions, with potential implications for refining landslide risk evaluations. This endeavor offers insight into the formulation of more effective and precise slope management protocols and disaster prevention strategies.

Dual-phase coexistence enables to alleviate resistance drift in phase-change films

The amorphous phase-change materials with spontaneous structural relaxation leads to the resistance drift with the time for phase-change neuron synaptic devices. Here, we modify the phase change properties of the conventional Ge_2Sb_2Te_5(GST) material by introducing an SnS phase. It is found that the resistance drift coefficient of SnS-doped GST was decreased from 0.06 to 0.01. It can be proposed that the origin originates from the precipitation of GST nanocrystals accompanied by the precipitation of SnS crystals compared to single-phase GST compound systems. We also found that the decrease in resistance drift can be attributed to the narrowed bandgap from 0.65 to 0.43 eV after SnS-doping. Thus, this study reveals the quantitative relationship between the resistance drift and the band gap and proposes a new idea for alleviating the resistance drift by composition optimization, which is of great significance for finding a promising phase change material.