Dynamic Characteristic Study of Ball Screw Feed Drive Systems Based on Multi-flexible Body Model

A new ball screw dynamic model was developed under the adequate consideration of the interaction in the screw-nut assembly (not only the mutual-coupling factors but also the self-coupling factors) . Based on this model,the multi-flexible body (MFB)dynamic model of ball screw feed drive system was then founded in order to take full account of the influencing factor of system flexibility and study the dynamic behaviors of the whole mechanical transmissions. Moreover,the MFB based state space modeling was proposed by modal state space method, which extraced the eigenmodes of more dominant modes and applied them into an MFB state space model,and realized the integrated model of servo drives and MFB mechanical transmissions more effectively and efficiently. In conclusion,the comparisons between simulations and experimental results show: the stiffness formulation of the ball screw assembly derived above is a suitable method for achieving accurate MFB models of ball screw mechanical transmission systems,this proposed MFB model is valid,and the integrated model of ball screw feed drive system is accurate and reliable. All these provide the important approaches and guidelines for dynamic characteristic study and selection of control parameters in the machine tool design period.

A strategy for lightweight designing of a railway vehicle car body including composite material and dynamic structural optimization

Rolling stock manufacturers are finding structural solutions to reduce power required by the vehicles,and the lightweight design of the car body represents a possible solution.Optimization processes and innovative materials can be combined in order to achieve this goal.In this framework,we propose the redesign and optimization process of the car body roof for a light rail vehicle,introducing a sandwich structure.Bonded joint was used as a fastening system.The project was carried out on a single car of a modern tram platform.This preliminary numerical work was developed in two main steps:redesign of the car body structure and optimization of the innovated system.Objective of the process was the mass reduction of the whole metallic structure,while the constraint condition was imposed on the first frequency of vibration of the system.The effect of introducing a sandwich panel within the roof assembly was evaluated,focusing on the mechanical and dynamic performances of the whole car body.A mass saving of 63%on the optimized components was achieved,corresponding to a 7.6%if compared to the complete car body shell.In addition,a positive increasing of 17.7%on the first frequency of vibration was observed.Encouraging results have been achieved in terms of weight reduction and mechanical behaviour of the innovated car body.

Landscape pattern dynamics of water body in Kaifeng city in the 20th century

Landscape spatial pattern mainly refers to the distribution of patches, which are different in size and shape in space owing to the interaction of various ecological activities. In landscape ecology study, landscape pattern has been one of the key study areas. Water body landscape plays an important role in the development history of a city, but at present city water body landscape in many cities has been destroyed, hence protecting water body in the city is becoming more and more important. In order to protect city water body landscape reasonably, the precondition is to probe the dynamics of water body landscape. Based on historical data and remote sensing data, six indexes including patch number, patch area, landscape dominance index, fractal dimension, patch density and connectivity index etc. were used to analyze landscape pattern dynamics of water body in Kaifeng city since the end of the Qing Dynasty (in the 20th century). The results showed: (1) Since the end of the Qing Dynasty, landscape area of water body in Kaifeng city increased first and then decreased from 1898 to 2002AD; the landscape dominant degree had the same changing tendency with the area. (2) Patch number of water body landscape in Kaifeng city had an increase from 1898 to 2002, but maximum area of patch, minimum area of patch and average area of patch decreased, which resulted in an increase in landscape fragment degree. (3) Connectivity index decreased and fractal dimension increased from 1898 to 2002. The reasons for these changes were the repeated overflows and flooding of the Yellow River and the influence of human activities.

Experimental study and numerical simulation of the impact of under-sleeper pads on the dynamic and static mechanical behavior of heavy-haul railway ballast track

Laying the under-sleeper pad(USP)is one of the effective measures commonly used to delay ballast degradation and reduce maintenance workload.To explore the impact of application of the USP on the dynamic and static mechanical behavior of the ballast track in the heavy-haul railway system,numerical simulation models of the ballast bed with USP and without USP are presented in this paper by using the discrete element method(DEM)-multi-flexible body dynamic(MFBD)coupling analysis method.The ballast bed support stiffness test and dynamic displacement tests were carried out on the actual operation of a heavy-haul railway line to verify the validity of the models.The results show that using the USP results in a 43.01%reduction in the ballast bed support stiffness and achieves a more uniform distribution of track loads on the sleepers.It effectively reduces the load borne by the sleeper directly under the wheel load,with a 7.89%reduction in the pressure on the sleeper.Furthermore,the laying of the USP changes the lateral resistance sharing ratio of the ballast bed,significantly reducing the stress level of the ballast bed under train loads,with an average stress reduction of 42.19 kPa.It also reduces the plastic displacement of ballast particles and lowers the peak value of rotational angular velocity by about 50%to 70%,which is conducive to slowing down ballast bed settlement deformation and reducing maintenance costs.In summary,laying the USP has a potential value in enhancing the stability and extending the lifespan of the ballast bed in heavy-haul railway systems.

MULTI-FLEXIBLE SYSTEM DYNAMIC MODELING THEORY AND APPLICATION

The flexible body modeling theory was demonstrated. An example of modeling a kind of automobile’s front suspension as a multi-flexible system was shown. Finally, it shows that the simulation results of multi-flexible dynamic model more approach the road test data than those of multi-rigid dynamic model do. Thus, it is fully testified that using multi-flexible body theory to model is necessary and effective.

Analysis for the Deployment of Single-Point Mooring Buoy System Based on Multi-Body Dynamics Method

Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.

Multi-Body Dynamics Modeling and Simulation Analysis of a Vehicle Suspension Based on Graph Theory

Multi-body dynamics,relative coordinates and graph theory are combined to analyze the structure of a vehicle suspension.The dynamic equations of the left front suspension system are derived for modeling.First,The pure tire theory model is used as the input criteria of the suspension multibody system dynamic model in order to simulate the suspension K&C characteristics test.Then,it is important to verify the accuracy of this model by comparing and analyzing the experimental data and simulation results.The results show that the model has high precision and can predict the performance of the vehicle.It also provides a new solution for the vehicle dynamic modeling.

The present status and prospects in the research of orbital dynamics and control near small celestial bodies

Small celestial body exploration is of great significance to deep space activities. The dynamics and control of orbits around small celestial bodies is of top priority in the exploration research. It includes the modeling of dynamics environment and the orbital dynamics mechanism. This paper introduced state-ofthe-art researches, major challenges, and future trends in this field. Three topics are mainly discussed： the gravitational field modeling of irregular-shaped small celestial bodies, natural orbital dynamics and control, and controlled orbital dynamics. Finally, constructive suggestions are made for China’s future space exploration missions.

A TENSOR METHOD FOR THE DERIVATION OF THE EQUATIONS OF RIGID BODY DYNAMICS

A tensor method for the derivation of the equations of rigid body dynamics, based on the concepts of continuum mechanics, is presented. The formula of time derivative of the inertia tensor with zero corotational rate is used to prove the equivalences of five methods, namely, Lagrange's equations, Nielsen's equations, Gibbs-Appell's equations, Kane's equations and the generalized momentum type of Kane's equations. Some differential identities on angular velocity and angular acceleration are given.

Monolithic Coupling of the Pressure and Rigid Body Motion Equations in Computational Marine Hydrodynamics

In Fluid Structure Interaction(FSI) problems encountered in marine hydrodynamics, the pressure field and the velocity of the rigid body are tightly coupled. This coupling is traditionally resolved in a partitioned manner by solving the rigid body motion equations once per nonlinear correction loop, updating the position of the body and solving the fluid flow equations in the new configuration. The partitioned approach requires a large number of nonlinear iteration loops per time–step. In order to enhance the coupling, a monolithic approach is proposed in Finite Volume(FV) framework,where the pressure equation and the rigid body motion equations are solved in a single linear system. The coupling is resolved by solving the rigid body motion equations once per linear solver iteration of the pressure equation, where updated pressure field is used to calculate new forces acting on the body, and by introducing the updated rigid body boundary velocity in to the pressure equation. In this paper the monolithic coupling is validated on a simple 2D heave decay case. Additionally, the method is compared to the traditional partitioned approach(i.e. "strongly coupled" approach) in terms of computational efficiency and accuracy. The comparison is performed on a seakeeping case in regular head waves, and it shows that the monolithic approach achieves similar accuracy with fewer nonlinear correctors per time–step. Hence, significant savings in computational time can be achieved while retaining the same level of accuracy.

Time-Domain Analysis of Body Freedom Flutter Based on 6DOF Equation

The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.

Discrete time transfer matrix method for dynamics of multibody system with flexible beams moving in space

In this paper, by defining new state vectors and developing new transfer matrices of various elements mov- ing in space, the discrete time transfer matrix method of multi-rigid-flexible-body system is expanded to study the dynamics of multibody system with flexible beams moving in space. Formulations and numerical example of a rigid- flexible-body three pendulums system moving in space are given to validate the method. Using the new method to study the dynamics of multi-rigid-flexible-body system mov- ing in space, the global dynamics equations of system are not needed, the orders of involved matrices of the system are very low and the computational speed is high, irrespec- tive of the size of the system. The new method is simple, straightforward, practical, and provides a powerful tool for multi-rigid-flexible-body system dynamics.

A SYMPLECTIC ALGORITHM FOR DYNAMICS OF RIGID BODY

For the dynamics of a rigid body with a fixed point based on the quaternion and the corresponding generalized momenta, a displacement-based symplectic integration scheme for differential-algebraic equations is proposed and applied to the Lagrange＇s equations based on dependent generalized momenta. Numerical experiments show that the algorithm possesses such characters as high precision and preserving system invariants. More importantly, the generalized momenta based Lagrange＇s equations show unique advantages over the traditional Lagrange＇s equations in symplectic integrations.

STUDY ON DYNAMICS, STABILITY AND CONTROL OF MULTI-BODY FLEXIBLE STRUCTURE SYSTEM IN FUNCTIONAL SPACE

The dynamics, stability and control problem of a kind of infinite dimensional system are studied in the functional space with the method of modern Mathematics. First, the dynamical control model of the distributed parameter system with multi-body flexible and multi-topological structure was established which has damping, gyroscopic parts and constrained damping. Secondly, the necessary and sufficient condition of controllability and observability, the stability theory and asymptotic property of the system were obtained. These results expand the theory of the field about the dynamics and control of the system with multi-body flexible structure, and have important engineering significance.

The Influence of Fence on Body Mass and Population Dynamics of Plateau Pika

To determine the influence of the fence on plateau pika (Ochotona curzoniae), we measured the body mass, breeding status, population densities, using live-trapping and line-transect sampling in April and September 2006. In April, body mass of both male and female plateau pika inside of fence were significant higher than that outside of fence (♀: F = 6.583, df = 1.20, p = 0.019;♂: F = 6.49, df = 1.17, p = 0.021). The ratio of spermary drop of an adult male was also higher (92.31% vs 57.14%). In September, body mass of adult male in both study sites showed no significant difference (F = 0.001, df = 1.23, p = 0.975), but were all significant higher than that of April (F = 121.713, df = 1.22, p < 0.001;F = 105.819, df = 1.20, p < 0.001). In April, the population densities of both study sites showed on significant difference (F = 2.388, df = 1.38, p = 0.131), but the population density inside of fence was much higher than that outside of fence (F = 7.534, df = 1.38, p = 0.009) in September. Our results show that the changes of quality and quantity of food that available to plateau pika in winter, can depress the range of reducing body mass of plateau pika, make breeding season ahead, and then promote the increase of population.

Articulated Lifting System Modeling Based on Dynamics of Flexible Multi-Body Systems

In lifting sub-system of deep-sea mining system, spherical joint is used to connect lifting pipes to replace fixed joint. Based on Dynamics of Flexible Multi-body systems, the mechanics model of articulated lifting system is established. Under the four-grade and six-grade oceanic condition, dynamic responses of lifting system are simulated and experiment verified. The simulation results are consistent with experimental ones. The maximum moment of flexion is 322 kN-m on the first pipe under six-grade sea condition. It is seen that the articulated connection can reduce the moment of flexion. The bending deformation of pipe center is researched, and the maximum is 0. 000479 m on the first pipe. Deformation has a little effect on the motion of system. It is feasible to analyze articulated lifting system by applying the theory of flexible multi-body dynamics. The articulated lifting system is obviously better than the fixed one.

Boundedness of Formation Configuration for Nonlinear Three-body Dynamics

The configuration boundedness of the three-body model dynamics is studied for Sun-Earth formation flying missions.The three-body formation flying model is built up with considering the lunar gravitational acceleration and solar radiation pressure.Because traditional linearized dynamics based method has relatively lower accuracy,a modified nonlinear formation configuration analysis method is proposed in this paper.Comparative studies are carried out from three aspects,i.e.,natural formation configuration with arbitrary departure time,initialization time and formation configuration boundedness,and specific initialization time for bounded formation configuration.Simulations demonstrate the differences between the two schemes, and indicate that the nonlinear dynamic method reduces the error caused by the model linearization and disturbance approximation,and thus provides higher accuracy for boundedness analysis,which is of value to initial parameters selection for natural three-body formation flying.

Dynamic Bending of Bionic Flexible Body Driven by Pneumatic Artificial Muscles(PAMs) for Spinning Gait of Quadruped Robot

The body of quadruped robot is generally developed with the rigid structure. The mobility of quadruped robot depcnds on the mechanical properties of the body mechanism, It is difficult for quadruped robot with rigid structure to achieve better mobility walking or running in the unstructured environment. A kind of bionic flexible body mechanism for quadruped robot is proposed, which is composed of one bionic spine and four pneumatic artificial muscles（PAMs）. This kind of body imitates the four-legged creatures＇ kinematical structure and physical properties, which has the characteristic of changeable stiff＇hess, lightweight, flexible and better bionics. The kinematics of body bending is derived, and the coordinated movement between the flexible body and legs is analyzed. The relationship between the body bending angle and the PAM length is obtained. The dynamics of the body bending is derived by the floating coordinate method and Lagrangian method, and the driving tbrce of PAM is determined. The experiment of body bending is conductcd, and the dynamic bending characteristic of bionic flexible body is evaluated. Experimental results show that the bending angle of the bionic flexible body can reach 18. An innovation body mechanism for quadruped robot is proposed, which has the characteristic of flexibility and achieve bending by changing gas pressure of PAMs. The coordinated movement of the body and legs can achieve spinning gait in order to improve the mobility of quadruped robot.

Evaluation on Spot Weld Models in Structural Dynamic Analysis of Automotive Body in White

Spot weld models are widely used in finite element analysis（FEA） of automotive body in white（BIW） to predict static,dynamic,durability and other characteristics of automotive BIW.However,few researches are done on evaluation of the validity of these spot weld models in structural dynamic analysis of BIW.To evaluate the validity and accuracy of spot weld models in structural dynamic analysis of BIW,two object functions,error function and deviation function,are introduced innovatively.Modal analysis of Two-panel and Double-hat structures,which are the dominated structures in BIW,is conducted,and the values of these two object functions are obtained.Based on the values of object functions,the validity of these spot weld models are evaluated.It is found that the area contact method（ACM2） and weld element connection（CWELD） can give more precise prediction in modal analysis of these two classical structures,thus are more applicable to structural dynamic analysis of automotive BIW.Modal analysis of a classical BIW is performed,which further confirms this evaluation.The error function and deviation function proposed in this research can give guidance on the adaptability of spot weld models in structural dynamic analysis of BIW.And this evaluation method can also be adopted in evaluation of other finite element models in static,dynamic and other kinds of analysis for automotive structures.

Experimental Study on Dynamic Mechanical Properties of Sprayed Concrete-Surrounding Rock Combined Body

To investigate the dynamic response problem of the double medium formed by the adherence of sprayed concrete and surrounding rock in the tunnel,a split Hopkinson pressure bar of 75 mm in diameter was adopted at the ages of 3,7 and 10 d.Experimental results showed that dynamic compressive strength and dynamic increase factors(DIF)of the combined bodies increase with the strain rate.With the growth of strain rate,the critical strain of the combined bodies first increases,then deceases.Furthermore,the combined bodies of 3 d reveal the plastic property and brittle property for 7 d and 10 d when the strain rate is over 80/s.The failure characteristic of the sprayed concrete changes from tearing strain damage to crushing damage as the growth of strain rate,and the failure characteristic of rock presents the tensile failure mode as demonstrated by the scanning electron microscope(SEM).