Design of a cross-dipole array acoustic logging tool

When entering an anisotropic formation, a shear wave splits into a fast wave and a slow wave. Based on the principle of four-component cross-dipole acoustic wave measurement, the anisotropy of HTI （Horizontal Transverse Isotropy） formation can be determined. The method of calculating the fast and slow wave data when a shear wave propagates along the borehole axis in anisotropic formation was analyzed, and the implementation of a cross-dipole acoustic logging tool was demonstrated. The tool was composed of transmitter electronics, transmitter mandrel, acoustic isolator, receiver mandrel and main control electronics. Sonde, transmitter circuit, signal receiving and processing circuit, data acquisition system, system control circuit and telemetry interface circuit were presented and analyzed. The test model was used in production wells and standard wells in various areas and the four-component cross-dipole waves were acquired and processed. The waves had good signal-to-noise ratio and clear characteristics, and the fast and slow waveforms, processed slowness curves, anisotropy and fast shear wave azimuth well matched with each other.

Bubble acoustical scattering cross section under multi-frequency acoustic excitation

The acoustical scattering cross section is usually employed to evaluate the scattering ability of the bubbles when they are excited by the incident acoustic waves. This parameter is strongly related to many important applications of performance prediction for search sonar or underwater telemetry, acoustical oceanography, acoustic cavitation, volcanology, and medical and industrial ultrasound. In the present paper, both the analytical and numerical analysis results of the acoustical scattering cross section of a single bubble under multi-frequency excitation are obtained. The nonlinear characteristics（e.g.,harmonics, subharmonics, and ultraharmonics） of the scattering cross section curve under multi-frequency excitation are investigated compared with single-frequency excitation. The influence of several paramount parameters（e.g., bubble equilibrium radius, acoustic pressure amplitude, and acoustic frequencies） in the multi-frequency system on the predictions of scattering cross section is discussed. It is shown that the combination resonances become significant in the multi-frequency system when the acoustic power is big enough, and the acoustical scattering cross section is promoted significantly within a much broader range of bubble sizes and acoustic frequencies due to the generation of more resonances.

Optimization Design for the Sandwich Piezoelectric Transmitters in Acoustic Logging

An optimized transducer prototype with a sandwich structure vibrated longitudinally is proposed for a transmitter in acoustic logging, especially in acoustic logging while drilling, 5y taking account of drilling environments with high temperature and pressure, as well as strong collar drilling vibration during the drilling process. Aimed to improve the transmitting performance, numerical and experimental studies for the transducer optimization are conducted. The impact of location and length of the piezoelectric stack on resonance characteristics arid effective electromeehanical coupling coefficient is calculated and analyzed. Admittance and transmitting performance of the proposed transducer are measured in laboratory experiments, and the results are compared with simulated ones. It is shown that the newly proposed transducer has higher transmitting performance with lower resonance frequencies. This work provides theoretical and experimental bases for transducer designing and acoustic wave measurements in acoustic logging, especially in acoustic logging while drilling.

An ARM-based debugging system for multipole array acoustic logging tools

This paper presents a debugging system for multi-pole array acoustic logging （MPAL） tools. The debugging system proposed in this study can debug the MPAL tool system, sub-system and local electronics. In the test equipment, we have used principal and subordinate structures, and interconnected the host computer and the front-end machine via Ethernet. The front-end machine is based on the ARM7 （advanced reduced instruction set computing （RISC） machine） technique, the processor of which runs an embedded operating system, namely, uClinux OS. We have analyzed the system telecommunication, human-machine interface circuit, transmitter mandrel interface circuit, receiver mandrel interface circuit, and board-level test interface circuit. The software used in the system consists of the embedded front-computer software and the host application software. We have explained in detail the flow chart of the boot loader in the embedded front-computer software. The host application software is composed of four application subroutines, which match with the functional modules of the system hardware. A net communication program based on the server^client mode is implemented by means of socket programming and multi-thread programming. Test results indicate that the data transmission rate of the system is higher than 1 MB/s, which completely meets the current requirements of the data transmission rate between the tool system and the wireline telemetry device. Application of the debugging system, which includes multiple level test methods, shows that the proposed system can fully meet the test requirements of MPAL at various levels.

Acoustic logging response law in shales based on petrophysical model

Shale acoustic logging response law is complex due to the multiple minerals and pores,which limits the application of acoustic logging in shale reservoir parameter evaluation,therefore clarifying the shale acoustic logging response law is of great importance.Different petrophysical models are adopted for the equivalence of organic matter,clay,matrix minerals,and fractures,in Wufeng-Longmaxi shale formation in the Jiaoshiba area.Finally,the self-consistent approximation model is used to combine different components,and a shale petrophysical model with a complex pore structure is constructed.The model verification results show it has good predictability for shale.Based on the model,the effect of different mineral compositions and different types of pores are studied.The results show that:1)The effect of clay and organic matter is very complex,and the variation laws of layered clay(organic matter)and dispersed clay(organic matter)on the acoustic wave are consistent.2)Layered clay or organic matter leads to the formation anisotropy increase,which makes the acoustic time difference greater than that of containing dispersed clay(organic matter).3)The fracture is the main control factor of anisotropy,and the anisotropy of gas-bearing fracture is higher than that of water/oil fracture.

Dynamic fluid transport property of hydraulic fractures and its evaluation using acoustic logging

The existing acoustic logging methods for evaluating the hydraulic fracturing effectiveness usually use the fracture density to evaluate the fracture volume, and the results often cannot accurately reflect the actual productivity. This paper studies the dynamic fluid flow through hydraulic fractures and its effect on borehole acoustic waves. Firstly, based on the fractal characteristics of fractures observed in hydraulic fracturing experiments, a permeability model of complex fracture network is established. Combining the dynamic fluid flow response of the model with the Biot-Rosenbaum theory that describes the acoustic wave propagation in permeable formations, the influence of hydraulic fractures on the velocity dispersion of borehole Stoneley-wave is then calculated and analyzed, whereby a novel hydraulic fracture fluid transport property evaluation method is proposed. The results show that the Stoneley-wave velocity dispersion characteristics caused by complex fractures can be equivalent to those of the plane fracture model, provided that the average permeability of the complex fracture model is equal to the permeability of the plane fracture. In addition, for fractures under high-permeability(fracture width 10~100 μm, permeability ~100 μm^(2)) and reduced permeability(1~10 μm, ~10 μm^(2), as in fracture closure) conditions, the Stoneley-wave velocity dispersion characteristics are significantly different. The field application shows that this fluid transport property evaluation method is practical to assess the permeability and the connectivity of hydraulic fractures.

Generalized collar waves in acoustic logging while drilling

Tool waves, also named collar waves, propagating along the drill collars in acoustic logging while drilling （ALWD）, strongly interfere with the needed P- and S-waves of a penetrated formation, which is a key issue in picking up formation P- and S-wave velocities. Previous studies on physical insulation for the collar waves designed on the collar between the source and the receiver sections did not bring to a satisfactory solution. In this paper, we investigate the propagation features of collar waves in different models. It is confirmed that there exists an indirect collar wave in the synthetic full waves due to the coupling between the drill collar and the borehole, even there is a perfect isolator between the source and the receiver. The direct collar waves propagating all along the tool and the indirect ones produced by echoes from the borehole wall are summarized as the generalized collar waves. Further analyses show that the indirect collar waves could be relatively strong in the full wave data. This is why the collar waves cannot be eliminated with satisfactory effect in many cases by designing the physical isolators carved on the tool.

Acousto-electric well logging by eccentric source and extraction of shear wave

The nonaxisymmetric acousto-electric field excited by an eccentric acoustic source in the borehole based on Pride seismoelectric theory is considered. It is shown that the acoustic field inside the borehole, converted electric and magnetic fields and coupled fields outside the borehole are composed of an infinitude of multipole fields with different orders. The numerical results show that both the electromagnetic waves and the seismoelectric field in the borehole, and the three components of both electric field and magnetic field can be detected. Measurements on the borehole axis will be of advantage to determining shear velocity information. The components of the symmetric and nonsymmetric acoustic and electromagnetic fields can be strengthened or weakened by adding or subtracting the two full waveforms logged in some azimuths. It may be a new method of directly measuring the shear wave velocity by using the borehole seismoelectric effect.

A nonparametric spectrum estimation method for dispersion and attenuation analysis of borehole acoustic measurements

Dispersion and attenuation analysis can be used to determine formation anisotropy induced by fractures,or stresses.In this paper,we propose a nonparametric spectrum estimation method to get phase dispersion characteristics and attenuation coefficient.By designing an appropriate vector filter,phase velocity,attenuation coefficient and amplitude can be inverted from the waveform recorded by the receiver array.Performance analysis of this algorithm is compared with Extended Prony Method(EPM)and Forward and Backward Matrix Pencil(FBMP)method.Based on the analysis results,the proposed method is capable of achieving high resolution and precision as the parametric spectrum estimation methods.At the meantime,it also keeps high stability as the other nonparametric spectrum estimation methods.At last,applications to synthetic waveforms modeled using finite difference method and real data show its efficiency.The real data processing results show that the P-wave attenuation log is more sensitive to oil formation compared to S-wave;and the S-wave attenuation log is more sensitive to shale formation compared to P-wave.

Response analyses on the drill-string channel for logging while drilling telemetry

Downhole acoustic telemetry(DAT),using a long drill string with periodical structures as the channel,is a prospective technology for improving the transmission rate of logging while drilling(LWD)data.Previous studies only focused on the acoustic property of a free drill string and neglected the coupling between pipes and fluid-filled boreholes.In addition to the drill-string waves,a series of fluid waves are recorded in the DAT channel,which has not been investigated yet.Unpredictable channel characteristics result in lower transmission rates and stability than expected.Therefore,a more realistic channel model is needed considering the fluid-filled borehole.In this paper,we propose a hybrid modeling method to investigate the response characteristics of the DAT channel.By combining the axial wavenumbers and excitation functions of mode waves in radially layered LWD structures,the channel model is approximated to the 1-D propagation,which considers transmission,reflection,and interconversion of the drillstring and fluid waves.The proposed 1-D approximation has been well validated by comparing the 2-D finite-difference modeling.It is revealed that the transmitted and converted fluid waves interfere with the drill-string wave,which characterizes the DAT channel as a particular coherent multi-path channel.When a fluid-filled borehole surrounds the drill string,the channel responses exhibit considerable delay as well as strong frequency selectivity in amplitude and phase.These new findings suggest that the complexity of the channel response has been underestimated in the past,and therefore channel measurements on the ground are unreliable.To address these channel characteristics,we apply a noncoherent demodulation strategy.The transmission rate for synthetic data reaches 15 bps in a 94.5 m long channel,indicating that the acoustic telemetry is promising to break the low-speed limitation of mud-pulse telemetry.

Full-wave synthetic acoustic logs in porous media

In order to investigate the permeability of porous media,it is necessary to figure out the property of wave propagation in this medium. The authors calculated the full waveforms and the 2-dimensional spectrum of fluid saturated porous media,analyzed the wave propagation characteristics of different permeable stratums. From the theoretical acoustic pressure waveform received at the well-axis and the 2-D spectrum it is revealed that longitudinal-,transverse-,Stoneley-,pseudo-Rayleigh-,longitudinal mode-and transverse mode waves are different in characters in various permeable strata. Stoneley wave is sensitive to the change of permeability,and its frequency range and amplitude attenuation are influenced by permeability.

Processing of array sonic logging data with nulti-scale STC technique

It is desirable to develop new signal processing techniques for effectively extracting reflected waves under the strong interferences of borehole guided waves. We presented a multi-scale semblance method for the separation and velocity （slowness） analysis of the reflected waves and guided waves in borehole acoustic logging. It was specially designed for the newly developed tools with ultra-long source- receiver spacing for acoustic reflection survey. This new method was a combination of the dual tree com- plex wavelets transform （DT-CWT） and the slowness travel time coherence （STC） method. Applications to the 3D finite difference （FD） modeling simulated data and to the field array sonic waveform signals have demonstrated the ability of this method to appropriately extract the reflected waves under severe interference from the guided waves and to suppress noise in the time-frequency domain.

Numerical simulation of an acoustic field generated by a phased arc array in a fluid-filled borehole

The acoustic tools widely used in borehole well logging and being developed in borehole acoustic reflection imaging do not have the function of azimuthal measurement due to a symmetric source, so they can not be used to evaluate the azimuthal character of borehole formation. In this paper, a 3D finite difference method was used to simulate the acoustic fields in a fluid-filled borehole generated by a traditional monopole source and a phased arc array. Acoustic waveforms were presented for both cases. The analysis of the simulated waveforms showed that different from the monopole source, the acoustic energy generated by the phased arc array transmitter mainly radiated to the borehole in a narrow azimuthal range, which was the key technique to implement azimuthal acoustic well logging. Similar to the monopole source, the waveforms generated by the phased arc array in the fluid-filled borehole also contain compressional （P） waves and shear （S） waves refracted along the borehole, which is the theoretical foundation of phased arc array acoustic well logging.

Wideband dipole logging based on segmen linear frequency modulation excitation

宽频带的偶极子信号是进行偶极子频散校正和近井壁成像的基础。为了获得宽带的频散曲线,本文在非线性调频偶极子激励信号的基础上,提出了一种分段线性调频激励信号,从而能简便对弯曲波激发强度曲线进行补偿,进而提升整个频带上的信噪比。利用有限差分方法数值计算了雷克子波声源、线性调频声源、非线性调频声源以及分段线性调频声源在均质硬地层以及径向变化地层两种井孔模型中的响应及其频散特征。结果表明,在信噪比较低的情况下,雷克子波产生的弯曲波频散曲线有效频带集中在艾里相附近,不能得到整个频带的频散曲线,无法获取近井壁及远离井壁的地层信息;线性调频信号可以获得艾里相频段及高频段的有效频散曲线,但无法获得低频段的频散信息,对远离井壁的地层信息探测能量不足;非线性调频信号可以获得整个频带的频散曲线,可以探测较远的地层信息,但不易实现;分段调频信号可以获得与非线性调频信号相同的效果,且易于实现,从而扩展了偶极子的探测范围和提高了速度计算的准确度。

3DFD Simulation of Asymmetric Wave Field by Side-wall Acoustic Tool in Open and Cased Wells

We developed a parallelized scheme of 3D finite difference （3DFD）with non-oniform staggered grid to simulate the eccentric borehole acoustic field with side-wall acoustic logging tools in open and cased wells. Higher accuracy and lower computation cost were achieved with this scheme for modeling such an asymmetric wave field generated by a high frequency source near or on the borehole wall. We also modeled the cases with and without considering the effects of the tool body. The simulation results demonstrated that the logging tool body would attenuate the direct waves but have only little influence on the interface waves in such a borehole condition. The effects of the tool body on the wave field were significant only when the contrast of the elastic properties between tool body and borehole fluid was large.

Improved Methods for Acoustic Transmission along the Drill String and Other Periodic Media

Acoustic telemetry along the drill string helps to know the physical and chemical characteristics of the formation and drilling fluid.A time-domain algorithm is developed for the propagation of one-dimensional axial stress waves with the inner and outer viscous fluid.The algorithm simulates the passbands,stopbands and spikes due to the presence of the discontinuous boundaries of drill string.Then the effects of transmitted pulses and transceivers on acoustic transmission are analysed.The simulated results show that the raised cosine pulses and optimal placements of transceivers improve system performance.Moreover,dual PZT receivers can exclude signals propagating in a direction opposite to the transmitted signals. It is obvious that the uses of the available modeling and signal processing techniques can make the drill string as a waveguide for transmitting information at high data rates.

Extraction method of component waves in full waveform acoustic data and its application

In conventional slowness-time coherence(STC)method,slowness and time need to be searched at the same time,which limits the precision and lowers the efficiency.The dichotomy method combined with slowness-time coherence algorithm aims to enhance the efficiency of data processing and to improve the precision.The algorithm changes the searching pattern of conventional slowness-time coherence method to acquire the slowness of component waves in array acoustic logging data.Based on energy ratio of short time window versus long time window and slowness-time coherence method,the algorithm first acquires the arrivals of the component waves using energy ratio of short time window versus long time window method.It then uses the calculated results as the arrivals in conventional slowness-time coherence method,so the slowness-time two-dimensional searching process is simplified to slowness searching process.Based on dichotomy method,the searching pattern is further optimized in replace of the ergodic searching pattern in conventional slowness-time coherence method,which means that as the iteration proceeds,the current searching interval is reduced to half of the former,so the number of searching times is decreased.The dichotomy method combined with slowness-time coherence algorithm is applied to well L in the data processing.Compared with conventional slowness-time coherence method,for compressional wave,the searching efficiency of the algorithm is 4.53 times better,while for Stoneley wave,the searching efficiency is 1.85 times better.Compared with conventional logging data,the average absolute error of the results of the dichotomy method combined with slowness-time coherence algorithm is 1.14μs/ft smaller than that of the conventional method,while the average relative error is 1.2 percent lower.The dichotomy method combined with slowness-time coherence algorithm shows good results in its application,which can enhance the processing efficiency remarkably while getting reliable results at the same time.

声波测井成像图中的反射体自动精确识别

针对声波测井成像图噪声多、图像模糊导致的反射体自动识别困难、依赖专家识别、费时耗力等问题,提出反射体自动识别方法。通过高斯混合模型将像素点按颜色进行聚类,拆分为多通道子图,筛选有效子图进行组合;基于局部连通性进行粗降噪;以连通区域内像素点数量为基准进行精细降噪,最终完成反射体区域的像素级精确识别。整个过程完全自动化,在油田开发所用声波成像图上进行实验,实现反射体区域像素级精确识别,极大地提高了开发效率。

远探测声波测井处理解释方法发展与展望

远探测声波测井技术(亦称反射声波测井技术)能够从井中探测及评价井外数十米范围内的裂缝、洞穴和断层等地质异常反射体,大大拓展了测井技术的应用范围。在回顾该技术发展历程的同时,重点介绍了远探测声波测井处理解释核心方法、软件和现场应用效果。结合目前油田实际生产需求和现有技术面临的挑战,指出远探测声波测井处理解释方法有5个最重要的发展方向:继目前利用声波时差和密度通过反射系数褶积进行“测井约束下的地震反演”后,突破实现井下实测反射波和地面地震反射波正反演关系的直接建立,同时开展页岩储层裂缝成像、压裂效果评价、随钻地质导向研究及远探测声波测井仪器革新。