Reliability of DC-link capacitor in pulsed power supply for accelerator magnet

Capacitors are widely used in pulsed magnet power supplies to reduce ripple voltage,store energy,and decrease power variation.In this study,DC-link capacitors in pulsed power supplies were investigated.By deriving an analytical method for the capacitor current on the H-bridge topology side,the root-mean-square value of the capacitor current was calculated,which helps in selecting the DC-link capacitors.The proposed method solves this problem quickly and with high accuracy.The current reconstruction of the DC-link capacitor is proposed to avoid structural damage in the capacitor’s current measurement,and the capacitor’s hotspot temperature and temperature rise are calculated using the FFT transform.The test results showed that the error between the calculated and measured temperature increases was within 1.5℃.Finally,the lifetime of DC-link capacitors was predicted based on Monte Carlo analysis.The proposed method can evaluate the reliability of DC-link capacitors in a non-isolated switching pulsed power supply for accelerators and is also applicable to film capacitors.

DC microgrid stability control with constant power load:a review

The DC microgrid has the advantages of high energy conversion efficiency,high energy transmission density,no reactive power flow,and grid-connected synchronization.It is an essential component of the future intelligent power distribution system.Constant power load(CPL)will degrade the stability of the DC microgrid and cause system voltage oscillation due to its negative resistance characteristics.As a result,the stability of DC microgrids with CPL has become a problem.At present,the research on the stability of DC microgrid is mainly focused on unipolar DC microgrid,while the research on bipolar DC microgrid lacks systematic discussion.The stability of DC microgrid using CPL was studied first,and then the current stability criteria of DC microgrid were summarized,and its research trend was analyzed.On this basis,aiming at the stability problem caused by CPL,the existing control methods were summarized from the perspective of source converter output impedance and load converter input impedance,and the current control methods were outlined as active and passive control methods.Lastly,the research path of bipolar DC microgrid stability with CPL was prospected.

Study on the Application of UHVDC Hierarchical Connection Mode to Multi-infeed HVDC System

随着我国特高压交直流技术的广泛应用，多馈入直流集中落入受端负荷中心将是未来我国电网发展所面临的重要问题。为从电网结构上有效解决多馈入直流系统的问题，提出一种特高压直流分层接入交流电网的方式。研究分层接入方式直流多馈入短路比计算方法的适用性，从理论上对比特高压直流不同接入方式下多馈入直流电网的系统特性，证明特高压直流分层接入方式有助于提高多馈入直流系统的电压支撑能力，引导潮流在1000kV与500kV层级间合理分布。结合国家电网规划，仿真验证了特高压直流分层接入方式的优势。

Analysis of Commutation Failure in Multi-Infeed HVDC System under Different Load Models

HVDC technology has been widely used in modern power system. On one hand, HVDC has the advantages of economy, high efficiency and strong controllability. While on the other hand, it makes the dynamic characteristics of the power system becoming more and more complex. That puts forward a new challenge to system stability and raises new questions for power system simulation. This paper focuses on the interaction between AC and DC systems, especially the problem of commutation failure caused by AC system fault. Based on the data of China Southern Power Grid, this paper calculates the fault regions that may cause commutation failure and calculates the system critical clearance time under different load models, analyzes the impacts of different load models on commutation failure and the stability of AC/DC hybrid system.

Design of DC regulated power supply based on single chip microcomputer

A DC regulated power supply with numerical control based on single chip microcomputer （SCM） is designed. SCM is the main controller and output voltage o{ DC power supply can be set by keyboard. The analog voltage can be obtained through D/A converter （DAC0832） so that different voltages can be provided by operational amplifier. The output voltage varies from 0 V to 12 V with the incremental value of 0. 1 V. The actual output voltage is shown in the nixietube. This DC regulated power supply is characterized by simple structure and easy operation.

基于回流功率优化的直流微网DC-DC变流器超螺旋滑模控制

针对直流微网系统中双有源桥直流变换器在系统发生扰动时动态特性差及在单移相调制下变换器效率不高等问题,该文在扩展移相调制下提出一种结合回流功率优化的超螺旋滑模控制策略。首先,分析双有源全桥(dual-active-bridge,DAB)变换器在扩展移相调制下两种模式的传输功率、回流功率数学模型及软开关特性,并以传输功率数学模型为基础建立DAB变换器的降阶模型。其次,以回流功率作为目标函数,以传输功率和软开关特性作为约束条件,通过Karush-Kuhn-Tucker(KKT)条件法寻找最优移相比组合;利用DAB变换器降阶模型设计超螺旋滑模控制中的等效部分,采用超螺旋算法作为切换部分,这两部分与内移相比D1共同作用生成外移相比D2,用于调节变换器的输出电压。最后进行了仿真及实验验证,实验结果表明:在负载投切、输入电压突变、参考电压改变时变换器具有良好的动态性能,同时能有效地减小回流功率。

基于移相控制统一模型的双有源桥DC-DC变换器基波环流优化控制策略

为充分利用双有源桥DC-DC变换器的容量,减小无功功率,提升工作效率,提出一种基于变换器移相控制统一模型的基波环流优化控制策略。通过引入基波移相比对变换器的所有移相控制方式进行统一描述,并采用傅里叶分解法建立全桥交流电压及电感电流的统一模型。该统一模型降低了多控制变量下变换器多模态分析的复杂性,适用于不同移相控制的所有工作模式,具有普适性。基于频域分析法和功率因数角,构建变换器传输功率及无功功率的统一数学模型。在此基础上,提出考虑无功基波分量的环流优化控制策略,并对传导损耗进行建模与分析。该策略简单有效,能够很好地减小变换器无功功率和改善系统效率,更有利于工程实际的应用。搭建了实验平台,对比了所提基波环流优化控制策略与传统移相控制方式下变换器的功率因数及变换效率,仿真和实验结果验证了理论分析的正确性和所提控制策略的可行性。

基于限流电抗器两侧特定频段暂态能量比的MTDC电网单端量保护方案

柔性直流输电技术有利于未来大量分布式能源接入电网,而配置快速、可靠的保护方案是柔性直流技术发展的关键。基于直流电网等效模型,提出一种基于限流电抗器两侧电压特定频段暂态能量比差异性的单端量故障区域识别方法。该方法依据贝瑞隆等效模型计算出限流电抗器两侧电压比,通过广义S变换提取限流电抗器两侧特定频段电压,根据故障时正负极限流电抗器的电压幅值差的差异性实现故障选极。最后在PSCAD/EMTDC平台搭建仿真模型,分析出发生区内外故障时差异性明显,具备较强的耐过渡电阻与抗噪声干扰能力。

一种可拓展双输入高增益DC/DC变换器

针对光伏发电系统中光伏电池板集成汇流的需求,提出了一种可拓展双输入高增益DC/DC变换器。该变换器采用了一种新型拓扑结构,可在实现输入输出电压高增益变换的同时降低了开关器件的电压应力。此外,所提变换器还具有可拓展性,可以根据不同的光伏电池板数量和输出电压要求对端口进行扩展,从而降低系统的复杂性和成本。首先详细介绍了所提变换器的拓扑结构,并推导出变换器在不同工作模态下的运行原理。然后,对该变换器的增益特性、开关器件的电压和电流应力、关键器件的参数选择和损耗计算等方面进行了深入的理论分析。最后,搭建了一台输出功率为1 kW的实验样机,并进行了实验测试。实验结果验证了所提变换器理论分析的正确性和可行性。

一种新型准Z源高增益DC-DC升压变换器

针对传统准Z源阻抗网络DC-DC升压变换器存在电压增益低和元件电压应力高的问题,提出一种新型准Z源高增益DC-DC升压变换器(HSQZSC)。首先,分析HSQZSC变换器两种模态工作原理,并对其进行稳态分析和参数设计。其次,与现已提出的Z源变换器进行性能对比,表明HSQZSC变换器具有高电压增益和元件电压应力低的优势。然后,对其建立状态空间模型进行小信号分析、稳定性分析和控制器的设计。最后,搭建100 W实物样机,实验结果验证了HSQZSC变换器的可行性与有效性。

集成有源开关电感和Y源倍压单元的高增益DC-DC变换器

针对光伏发电系统中光伏组件电压等级的提升,提出一种集成有源开关电感和Y源倍压单元的高增益DC-DC变换器。所提变换器能够实现低开关管电压应力,具有高自由度电压调节能力,在满足一定升压条件下仍能保证电路的效率,在光伏发电中具有较大的应用潜力。对变换器的工作模态、器件电压电流应力、参数设计和损耗效率进行详细阐述。最后通过实验验证所提拓扑结构的可行性。

三电平混合全桥DC-DC变换器回流功率优化控制

针对三电平混合全桥双向DC-DC变换器存在的回流功率较大的问题,本文以回流功率最小化为目标,提出了一种基于双重移相控制的回流功率优化控制策略。首先,建立了三电平混合全桥DC-DC变换器的数学模型,分析了变换器回流功率和传输功率的特性关系;然后,以回流功率作为目标函数,通过KKT条件法将不同模式的等式和不等式约束条件转换为约束函数,并构建拉格朗日多项式函数求最佳移相比组合;最后,为提高系统动态响应的快速性,采用了环内直接功率控制方法,实现了变换器在面对突发情况时系统能迅速实现动态响应。仿真结果表明,在输入电压和负载突变时,本文提出的改进优化控制策略可以有效减小回流功率,提高系统的动态响应性能。

基于MPC的耦合电感飞跨电容双向DC/DC变换器功率均衡解耦控制策略

耦合电感功率变换器因耦合电感阻抗、电感值等参数差异易导致功率不均衡。针对耦合电感飞跨电容双向DC/DC变换器,提出一种基于模型预测控制(MPC)的功率均衡解耦控制策略。通过对变换器原理进行分析,建立基于电感电流解耦的数学模型,得到包括电感电流和飞跨电容电压等6个控制变量的解耦控制方法。在此基础上,提出基于MPC的功率均衡解耦控制策略。同时,为降低MPC算法的运算负荷,根据解耦控制模型重构模型预测价值函数,实现各控制变量独立动态寻优,使系统能在稳定控制输出电压及飞跨电容电压的同时,实现两相耦合电感的功率均衡控制。最后,通过理论分析及实验对所提策略进行有效验证。

Synthesis and properties of Cr-Al-Si-N films deposited by hybrid coating system with high power impulse magnetron sputtering (HIPIMS) and DC pulse sputtering

The CrN and Cr-Al-Si-N films were deposited on Si wafer and SUS 304 substrates by a hybrid coating system with high power impulse magnetron sputtering (HIPIMS) and a DC pulse sputtering using Cr and AlSi targets under N2/Ar atmosphere.By varying the sputtering current of the AlSi target in the range of 0-2.5 A,both the Al and Si contents in the films increased gradually from 0 to 19.1% and 11.1% (mole fraction),respectively.The influences of the AlSi cathode DC pulse current on the microstructure,phase constituents,mechanical properties,and oxidation behaviors of the Cr-Al-Si-N films were investigated systematically.The results indicate that the as-deposited Cr-Al-Si-N films possess the typical nanocomposite structure,namely the face centered cubic (Cr,Al)N nano-crystallites are embedded in the amorphous Si3N4 matrix.With increasing the Al and Si contents,the hardness of the film first increases from 20.8 GPa for the CrN film to the peak value of 29.4 GPa for the Cr0.23Al0.14Si0.07 N film,and then decreases gradually.In the meanwhile,the Cr0.23Al0.14Si0.07N film also possesses excellent high-temperature oxidation resistance that is much better than that of the CrN film at 900 or 1000 °C.

不平衡电网下AC-DC矩阵变换器的新型模型预测控制

为降低AC-DC矩阵变换器在输入不平衡条件下网侧有功功率波动,以及离散型模型预测控制中开关频率不固定的问题,提出一种新型模型预测控制方法。通过根据电网电流相位角选择有效矢量,避免了传统模型预测控制评估价值函数计算的负担。提出了一种二阶扩展复数卡尔曼滤波器,计算精度可以达到泰勒级数展开的二阶项,新型模型预测控制能够在不平衡电网系统中应用。仿真结果表明:所提控制策略在输入电压不平衡工况下,能够有效抑制网侧电流谐波,稳定系统输出的有功功率,并且表现出良好的性能。

基于DCS的风电场有功控制系统设计研究

随着新型电力系统的提出和要求,风力发电在电力系统中的占比不断提高。目前已建设的风电场的AGC控制系统大多不能满足相关规定的要求,亟须改进和完善。基于DCS系统为核心对风电场AGC控制进行了改进设计,提出了一套先进、开放、易用和可靠的风电AGC系统,实现了电网规定的所有功能和指标。

Study on Lightning Protection Design of DCS in a Nuclear Power Plant

DCS （distributed control system） plays a decisive role in the overall operation of a nuclear power plant. If DCS fails, it will seriously affect the normal production of nuclear power plant, causing great losses. So it is very important to take perfect lightning protection measures on DCS of the nuclear power plant. In this paper, according to the actual situation of DCS in a nuclear power plant, by controlling lightning point, securely booting lightning into the ground network, improving low-resistance ground network, eliminating ground loops, determining the safety space, surge protection of power and signal, a set of complete lightning protection design scheme was systematically put forward. Some specific lightning protection measures were highlighted, such as the DCS grounding, equipotential bonds and shields, and some specific considerations were put forward. All of these could offer reference in the practical application.

OES study of the gas phase during diamond films deposition in high power DC arc plasma jet CVD system

This paper used optical emission spectroscopy （OES） to study the gas phase in high power DC arc plasma jet chemical vapour deposition （CVD） during diamond films growth processes. The results show that all the deposition parameters （methane concentration, substrate temperature, gas flow rate and ratio of H2/Ar） could strongly influence the gas phase. C2 is found to be the most sensitive radical to deposition parameters among the radicals in gas phase. Spatially resolved OES implies that a relative high concentration of atomic H exists near the substrate surface, which is beneficial for diamond film growth. The relatively high concentrations of C2 and CH are correlated with high deposition rate of diamond. In our high deposition rate system, C2 is presumed to be the main growth radical, and CH is also believed to contribute the diamond deposition.

Research on power electronic transformer applied in AC/DC hybrid distribution networks

The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.

核电DCS内生网络安全需求分析方法研究

核电数字化控制系统(DCS)的内生网络安全增强可以进一步提高核电站的安全性。通过对工业领域、核电领域网络安全相关法律法规、标准的研究,以及对国内外同行业产品内生网络安全情况的调研,针对核电DCS内生网络安全提出8项基本安全需求、103条总体安全需求条目。以某公司DCS为例开展需求分析。针对该公司产品存在不符合项提出整改建议,提升了该公司产品的内生网络安全。核电DCS内生网络安全需求分析方法为其他领域工业自动化产品的内生网络安全需求分析提供了参考。工业自动化产品的内生网络安全在需求分析时,除了开展工业自动化产品基本安全需求分析以外,还应关注应用领域的特殊安全需求。该方法可以提升工业自动化产品整体安全性。