In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were prop...In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were proposed to mitigate interferences between the base stations (inter-cell). These schemes are categorized into linear and non-linear;this study focused on linear precoding schemes, which are grounded into three types, namely Zero Forcing (ZF), Block Diagonalization (BD), and Signal Leakage Noise Ratio (SLNR). The study included the Cooperative Multi-cell Multi Input Multi Output (MIMO) System, whereby each Base Station serves more than one mobile station and all Base Stations on the system are assisted by each other by shared the Channel State Information (CSI). Based on the Multi-Cell Multiuser MIMO system, each Base Station on the cell is intended to maximize the data transmission rate by its mobile users by increasing the Signal Interference to Noise Ratio after the interference has been mitigated due to the usefully of linear precoding schemes on the transmitter. Moreover, these schemes used different approaches to mitigate interference. This study mainly concentrates on evaluating the performance of these schemes through the channel distribution models such as Ray-leigh and Rician included in the presence of noise errors. The results show that the SLNR scheme outperforms ZF and BD schemes overall scenario. This implied that when the value of SNR increased the performance of SLNR increased by 21.4% and 45.7% for ZF and BD respectively.展开更多
A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set process...A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set processor(ASIP), which uses TSE algorithm instead of resource-consuming reciprocal and reciprocal square root(RSR) operations.The aim is to give a high performance implementation for MMSE and QRD in one programmable platform simultaneously.Furthermore, instruction set architecture(ISA) and the allocation of data paths in single instruction multiple data-very long instruction word(SIMD-VLIW) architecture are provided, offering more data parallelism and instruction parallelism for different dimension matrices and operation types.Meanwhile, multiple level numerical precision can be achieved with flexible table size and expansion order in TSE ISA.The ASIP has been implemented to a 28 nm CMOS process and frequency reaches 800 MHz.Experimental results show that the proposed design provides perfect numerical precision within the fixed bit-width of the ASIP, higher matrix processing rate better than the requirements of 5G system and more rate-area efficiency comparable with ASIC implementations.展开更多
An extensive 4 × 4 MIMO channel measurement is carried out at 6. 0- 6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered...An extensive 4 × 4 MIMO channel measurement is carried out at 6. 0- 6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss,delay spread and spatial correlation are presented. The measurement shows that,for corridor coverage,2×2 MIMO is more economical than 4×4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band,the measured channel parameters at 6. 0-6. 4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore,our measurement results provide new guidance for the design and development of the system working on 6. 0-6. 4 GHz band.展开更多
Precoding methods at the Base Station (BS) can be used to deal with the inter-cell interference and improve the signal quality of the user especially at the cell edge. In this paper, a novel Zero-Forcing (ZF) precodin...Precoding methods at the Base Station (BS) can be used to deal with the inter-cell interference and improve the signal quality of the user especially at the cell edge. In this paper, a novel Zero-Forcing (ZF) precoding method is proposed and investigated for multi-cell Multi-Input Multi-Output (MIMO) systems. We propose a relaxed ZF precoding method by relaxing the ZF criterion to some degree so that the inter-cell interference may not be zero. Complexity analysis shows that compared with the conventional ZF method, the additional computation complexity for the proposed method is trivial. Simulation results show that the proposed relaxed ZF method has better performance than the conventional ZF method in terms of the sum-rate, especially at low Signal to Noise Ratio (SNR).展开更多
The energy efficiency(EE) for the full-duplex massive multi-input multi-output(MIMO) system is investigated. Given the transmit powers of both the uplink and the downlink, the closed-form solutions of the optimal ...The energy efficiency(EE) for the full-duplex massive multi-input multi-output(MIMO) system is investigated. Given the transmit powers of both the uplink and the downlink, the closed-form solutions of the optimal number of antennas and the maximum EE are achieved in the high regime of the signal-to-noise ratio(SNR). It is shown that the optimal number of antennas and the maximum EE gets larger with the increase in user numbers. To further improve the EE, an optimization algorithm with low complexity is proposed to jointly determine the number of antennas and the transmit powers of both the uplink and the downlink. It is shown that, the proposed algorithm can achieve the system performance very close to the exhaustive search.展开更多
To bridge the performance gap between original probability data association (PDA) algorithm and the optimum maximum a posterior (MAP) algorithm for multi-input multi-output (MIMO) detection, a grouped PDA (GP-...To bridge the performance gap between original probability data association (PDA) algorithm and the optimum maximum a posterior (MAP) algorithm for multi-input multi-output (MIMO) detection, a grouped PDA (GP-PDA) detection algorithm is proposed. The proposed GP-PDA method divides all the transmit antennas into groups, and then updates the symbol probabilities group by group using PDA computations. In each group, joint a posterior probability (APP) is computed to obtain the APP of a single symbol in this group, like the MAP algorithm. Such new algorithm combines the characters of MAP and PDA. MAP and original PDA algorithm can be regarded as a special case of the proposed GP-PDA. Simulations show that the proposed GP-PDA provides a performance and complexity trade, off between original PDA and MAP algorithm.展开更多
Lookup table is widely used in automotive industry for the design of engine control units(ECU).Together with a proportional-integral controller,a feed-forward and feedback control scheme is often adopted for automotiv...Lookup table is widely used in automotive industry for the design of engine control units(ECU).Together with a proportional-integral controller,a feed-forward and feedback control scheme is often adopted for automotive engine management system(EMS).Usually,an ECU has a structure of multi-input and single-output(MISO).Therefore,if there are multiple objectives proposed in EMS,there would be corresponding numbers of ECUs that need to be designed.In this situation,huge efforts and time were spent on calibration.In this work,a multi-input and multi-out(MIMO) approach based on model predictive control(MPC) was presented for the automatic cruise system of automotive engine.The results show that the tracking of engine speed command and the regulation of air/fuel ratio(AFR) can be achieved simultaneously under the new scheme.The mean absolute error(MAE) for engine speed control is 0.037,and the MAE for air fuel ratio is 0.069.展开更多
In this paper,a linear/nonlinear switching active disturbance rejection control(SADRC)based decoupling control approach is proposed to deal with some difficult control problems in a class of multi-input multi-output(M...In this paper,a linear/nonlinear switching active disturbance rejection control(SADRC)based decoupling control approach is proposed to deal with some difficult control problems in a class of multi-input multi-output(MIMO)systems such as multi-variables,disturbances,and coupling,etc.Firstly,the structure and parameter tuning method of SADRC is introduced into this paper.Followed on this,virtual control variables are adopted into the MIMO systems,making the systems decoupled.Then the SADRC controller is designed for every subsystem.After this,a stability analyzed method via the Lyapunov function is proposed for the whole system.Finally,some simulations are presented to demonstrate the anti-disturbance and robustness of SADRC,and results show SADRC has a potential applications in engineering practice.展开更多
The FRF estimator based on the errors-in-variables (EV) model of multi-input multi-output (MIMO) system is presented to reduce the bias error of FRF HI estimator. The FRF HI estimator is influenced by the noises i...The FRF estimator based on the errors-in-variables (EV) model of multi-input multi-output (MIMO) system is presented to reduce the bias error of FRF HI estimator. The FRF HI estimator is influenced by the noises in the inputs of the system and generates an under-estimation of the true FRF. The FRF estimator based on the EV model takes into account the errors in both the inputs and outputs of the system and would lead to more accurate FRF estimation. The FRF estimator based on the EV model is applied to the waveform replication on the 6-DOF (degree-of-freedom) hydraulic vibration table. The result shows that it is favorable to improve the control precision of the MIMO vibration control system.展开更多
Noises always disturb the control effect of an environment test especially in multi-input multi-output(MIMO) systems. If the frequency response function matrices are ill-conditioned, the noises in the driving forces w...Noises always disturb the control effect of an environment test especially in multi-input multi-output(MIMO) systems. If the frequency response function matrices are ill-conditioned, the noises in the driving forces will be amplified and the response spectral lines may awfully exceed their tolerances. Most of the major biases between the response spectra and the reference spectra are produced by the amplified noises. However, ordinary control algorithms can hardly reduce the level of noises. The influences of the noises on both the auto- and cross-power spectra are analyzed in this paper. As a conventional frequency domain method on the inverse problem, the Tikhonov filter is adopted in the environment test to suppress the exceeding spectral lines. By altering regularization parameters gradually, the auto-power spectra can be improved in a closed control loop. Instead of using the traditional way of selecting regularization parameters, we observe the coherence change to estimate noise eliminations. Incidentally, the requirement of coherence control can be realized. The errors of the phase are then studied and a phase control algorithm is introduced at the end as a supplement of cross-power spectra control. The Tikhonov filter and the proposed phase control algorithm are tested numerically and experimentally. The results show that the noises in the vicinity of lightly damped resonant peaks are more stubborn. The response spectra are able to be greatly improved by the combination of these two methods.展开更多
In this study, a novel approach for dynamic modeling and closed-loop control of hybrid grid-connected renewable energy system with multi-input multi-output(MIMO) controller is proposed. The studied converter includes ...In this study, a novel approach for dynamic modeling and closed-loop control of hybrid grid-connected renewable energy system with multi-input multi-output(MIMO) controller is proposed. The studied converter includes two parallel DC-DC boost converters, which are connected into the power grid through a single-phase H-bridge inverter. The proposed MIMO controller is developed for maximum power point tracking of photovoltaic(PV)/fuel-cell(FC) input power sources and output power control of the grid-connected DC-AC inverter. Considering circuit topology of the system, a unique MIMO model is proposed for the analysis of the entire system. A unique model of the system includes all of the circuit state variables in DCDC and DC-AC converters. In fact, from the viewpoint of closed-loop controller design, the hybrid grid-connected energy system is an MIMO system. The control inputs of the system are duty cycles of the DC-DC boost converters and the amplitude modulation index of DC-AC inverters. Furthermore, the control outputs are the output power of the PV/FC input power sources as well as AC power injected into the power grid. After the development of the unique model for the entire system, a decoupling network is introduced for system input-output linearization due to inherent connection of the control outputs with all of the system inputs. Considering the decoupled model and small signal linearization, the required linear controllers are designed to adjust the outputs. Finally, to evaluate the accuracy and effectiveness of the designed controllers, the PV/FC based grid-connected system is simulated using the MATLAB/Simulink toolbox.展开更多
A form of iterative learning control (ILC) is used to update the set-point for the local controller. It is referred to as set-point-related (SPR) indirect ILC. SPR indirect ILC has shown excellent performance: as a su...A form of iterative learning control (ILC) is used to update the set-point for the local controller. It is referred to as set-point-related (SPR) indirect ILC. SPR indirect ILC has shown excellent performance: as a supervision module for the local controller, ILC can improve the tracking performance of the closed-loop system along the batch direction. In this study, an ILC-based P-type controller is proposed for multi-input multi-output (MIMO) linear batch processes, where a P-type controller is used to design the control signal directly and an ILC module is used to update the set-point for the P-type controller. Under the proposed ILC-based P-type controller, the closed-loop system can be transformed to a 2-dimensional (2D) Roesser s system. Based on the 2D system framework, a sufficient condition for asymptotic stability of the closed-loop system is derived in this paper. In terms of the average tracking error (ATE), the closed-loop control performance under the proposed algorithm can be improved from batch to batch, even though there are repetitive disturbances. A numerical example is used to validate the proposed results.展开更多
A new semi-blind adaptive beamforming scheme is proposed for multi-input multi-output (MIMO) induced and spacedivision multiple-access based wireless systems that employ high order phase shift keying signaling. A mi...A new semi-blind adaptive beamforming scheme is proposed for multi-input multi-output (MIMO) induced and spacedivision multiple-access based wireless systems that employ high order phase shift keying signaling. A minimum number of training symbols, very close to the number of receiver antenna elements, are used to provide a rough initial least squares estimate of the beamformer's weight vector. A novel cost function combining the constant modulus criterion with decision-directed adaptation is adopted to adapt the beamformer weight vector. This cost function can be approximated as a quadratic form with a closed-form solution, based on which we then derive the recursive least squares (RLS) semi-blind adaptive beamforming algorithm. This semi-blind adaptive beamforming scheme is capable of converging fast to the minimum mean-square-error beamforming solution, as demonstrated in our simulation study. Our proposed semi-blind RLS beamforming algorithm therefore provides an efficient detection scheme for the future generation of MIMO aided mobile communication systems.展开更多
Uniform channel decomposition (UCD) has been proven to be optimal in bit error rate (BER) performance and strictly capacity lossless when perfect channel state information (CSI) is assumed to be available at bot...Uniform channel decomposition (UCD) has been proven to be optimal in bit error rate (BER) performance and strictly capacity lossless when perfect channel state information (CSI) is assumed to be available at both the transmitter and receiver side. In practice,CSI can be obtained by channel estimation at receiver and conveyed to transmitter via a limited-rate feedback channel. In such case,the implementation of traditional UCD by treating the imperfect CSI as perfect CSI cause significant performance degradation due to inevitable channel estimation error and vector quantization error. To overcome this problem,a practical robust UCD scheme was proposed in this paper,which includes two steps,firstly,a matching architecture was proposed to eliminate the mismatch between CSI at receiver (CSIR) and CSI at transmitter (CSIT),secondly,an MMSE based robust UCD scheme considering channel estimation error and vector quantization error as an integral part of the design was derived. Simulation results show that the proposed practical robust UCD scheme is capable of improving the BER performance greatly in the context of channel estimation error and vector quantization error compared with the traditional UCD scheme.展开更多
This paper presents the design of decentralized repetitive control (RC) for multi-input multi-output (MIMO) systems. An optimization method is used to obtain a RC compensator that ensures system stability and good...This paper presents the design of decentralized repetitive control (RC) for multi-input multi-output (MIMO) systems. An optimization method is used to obtain a RC compensator that ensures system stability and good tracking performance. The designed compensator is in the form of a stable, low order, and causal filter, in which the compensator can be implemented separately without being merged with the RC internal model. This will reduce complexity in the implementation. Simulation results and comparison study are given to demonstrate the effectiveness of the proposed design. The novelty of design is also verified in experiments on a 2 degrees of freedom (DOF) robot.展开更多
As a generalization of orthogonal frequency-division multiplexing (OFDM) systems, multi-input multi-output (MIMO) OFDM systems are very sensitive to carrier frequency offset (CFO). This paper proposes a blind CF...As a generalization of orthogonal frequency-division multiplexing (OFDM) systems, multi-input multi-output (MIMO) OFDM systems are very sensitive to carrier frequency offset (CFO). This paper proposes a blind CFO estimation method based on power spectrum analysis, which has high bandwidth efficiency and is much less complex. This method can be used to estimate the residual CFO, which is less than half of the subcarrier spacing. The method uses a cosine cost function to get a closed-form CFO estimate. Simulation results illustrate that the method is effective for MIMO OFDM systems.展开更多
文摘In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were proposed to mitigate interferences between the base stations (inter-cell). These schemes are categorized into linear and non-linear;this study focused on linear precoding schemes, which are grounded into three types, namely Zero Forcing (ZF), Block Diagonalization (BD), and Signal Leakage Noise Ratio (SLNR). The study included the Cooperative Multi-cell Multi Input Multi Output (MIMO) System, whereby each Base Station serves more than one mobile station and all Base Stations on the system are assisted by each other by shared the Channel State Information (CSI). Based on the Multi-Cell Multiuser MIMO system, each Base Station on the cell is intended to maximize the data transmission rate by its mobile users by increasing the Signal Interference to Noise Ratio after the interference has been mitigated due to the usefully of linear precoding schemes on the transmitter. Moreover, these schemes used different approaches to mitigate interference. This study mainly concentrates on evaluating the performance of these schemes through the channel distribution models such as Ray-leigh and Rician included in the presence of noise errors. The results show that the SLNR scheme outperforms ZF and BD schemes overall scenario. This implied that when the value of SNR increased the performance of SLNR increased by 21.4% and 45.7% for ZF and BD respectively.
基金Supported by the Industrial Internet Innovation and Development Project of Ministry of Industry and Information Technology (No.GHBJ2004)。
文摘A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set processor(ASIP), which uses TSE algorithm instead of resource-consuming reciprocal and reciprocal square root(RSR) operations.The aim is to give a high performance implementation for MMSE and QRD in one programmable platform simultaneously.Furthermore, instruction set architecture(ISA) and the allocation of data paths in single instruction multiple data-very long instruction word(SIMD-VLIW) architecture are provided, offering more data parallelism and instruction parallelism for different dimension matrices and operation types.Meanwhile, multiple level numerical precision can be achieved with flexible table size and expansion order in TSE ISA.The ASIP has been implemented to a 28 nm CMOS process and frequency reaches 800 MHz.Experimental results show that the proposed design provides perfect numerical precision within the fixed bit-width of the ASIP, higher matrix processing rate better than the requirements of 5G system and more rate-area efficiency comparable with ASIC implementations.
基金Sponsored by the National Natural Science Foundation of China(Grant No.61371101)the Shenzhen Biological,Internet,New Energy and New Materials Industry Development Project(Grant No.JC201104210030A)+2 种基金the Science and Technology Basic Research Project of Shenzhen(Grant No.JC200903120174A)the Research Innovation Fund Project of HIT(Grant No.HIT.NSFIR.2010133)the WINDOW-Towards Pervasive Indoor Wireless Networks,and the European Commission under its 7th Framework Program(Grant No.318992)
文摘An extensive 4 × 4 MIMO channel measurement is carried out at 6. 0- 6. 4 GHz under a typical classroom environment with channel sounder based on vector network analyzer. Both LOS and NLOS scenarios are considered. The results on path loss,delay spread and spatial correlation are presented. The measurement shows that,for corridor coverage,2×2 MIMO is more economical than 4×4 MIMO due to high correlation. In order to identify the unique characteristics at the high frequency band,the measured channel parameters at 6. 0-6. 4 GHz are compared with those at 2. 45 GHz. The comparison shows that the shortened wavelength of this higher frequency band results in a great difference of channel characteristics. Therefore,our measurement results provide new guidance for the design and development of the system working on 6. 0-6. 4 GHz band.
基金Supported by Shantou Youth Scientific Research Fund(No.YR11002)Distinguished Youth Fund in Higher Education of Guangdong Province(No.2012LYM_0064)
文摘Precoding methods at the Base Station (BS) can be used to deal with the inter-cell interference and improve the signal quality of the user especially at the cell edge. In this paper, a novel Zero-Forcing (ZF) precoding method is proposed and investigated for multi-cell Multi-Input Multi-Output (MIMO) systems. We propose a relaxed ZF precoding method by relaxing the ZF criterion to some degree so that the inter-cell interference may not be zero. Complexity analysis shows that compared with the conventional ZF method, the additional computation complexity for the proposed method is trivial. Simulation results show that the proposed relaxed ZF method has better performance than the conventional ZF method in terms of the sum-rate, especially at low Signal to Noise Ratio (SNR).
基金supported by the National Natural Science Foundation of China(61371188)the Research Fund for the Doctoral Program of Higher Education(20130131110029)+2 种基金the Open Fund of State Key Laboratory of Integrated Services Networks(ISN14-03)the China Postdoctoral Science Foundation(2014M560553)the Special Funds for Postdoctoral Innovative Projects of Shandong Province(201401013)
文摘The energy efficiency(EE) for the full-duplex massive multi-input multi-output(MIMO) system is investigated. Given the transmit powers of both the uplink and the downlink, the closed-form solutions of the optimal number of antennas and the maximum EE are achieved in the high regime of the signal-to-noise ratio(SNR). It is shown that the optimal number of antennas and the maximum EE gets larger with the increase in user numbers. To further improve the EE, an optimization algorithm with low complexity is proposed to jointly determine the number of antennas and the transmit powers of both the uplink and the downlink. It is shown that, the proposed algorithm can achieve the system performance very close to the exhaustive search.
基金Sponsored by the National Natural Science Foundation of China(60572120)
文摘To bridge the performance gap between original probability data association (PDA) algorithm and the optimum maximum a posterior (MAP) algorithm for multi-input multi-output (MIMO) detection, a grouped PDA (GP-PDA) detection algorithm is proposed. The proposed GP-PDA method divides all the transmit antennas into groups, and then updates the symbol probabilities group by group using PDA computations. In each group, joint a posterior probability (APP) is computed to obtain the APP of a single symbol in this group, like the MAP algorithm. Such new algorithm combines the characters of MAP and PDA. MAP and original PDA algorithm can be regarded as a special case of the proposed GP-PDA. Simulations show that the proposed GP-PDA provides a performance and complexity trade, off between original PDA and MAP algorithm.
基金Project supported by the Centre for Smart Grid and Information Convergence(CeSGIC)at Xi’an Jiaotong-Liverpool University,China
文摘Lookup table is widely used in automotive industry for the design of engine control units(ECU).Together with a proportional-integral controller,a feed-forward and feedback control scheme is often adopted for automotive engine management system(EMS).Usually,an ECU has a structure of multi-input and single-output(MISO).Therefore,if there are multiple objectives proposed in EMS,there would be corresponding numbers of ECUs that need to be designed.In this situation,huge efforts and time were spent on calibration.In this work,a multi-input and multi-out(MIMO) approach based on model predictive control(MPC) was presented for the automatic cruise system of automotive engine.The results show that the tracking of engine speed command and the regulation of air/fuel ratio(AFR) can be achieved simultaneously under the new scheme.The mean absolute error(MAE) for engine speed control is 0.037,and the MAE for air fuel ratio is 0.069.
基金supported by the Scientific Research Innovation Development Foundation of Army Engineering University((2019)71).
文摘In this paper,a linear/nonlinear switching active disturbance rejection control(SADRC)based decoupling control approach is proposed to deal with some difficult control problems in a class of multi-input multi-output(MIMO)systems such as multi-variables,disturbances,and coupling,etc.Firstly,the structure and parameter tuning method of SADRC is introduced into this paper.Followed on this,virtual control variables are adopted into the MIMO systems,making the systems decoupled.Then the SADRC controller is designed for every subsystem.After this,a stability analyzed method via the Lyapunov function is proposed for the whole system.Finally,some simulations are presented to demonstrate the anti-disturbance and robustness of SADRC,and results show SADRC has a potential applications in engineering practice.
基金This project is supported by Program for New Century Excellent Talents in University,China(No.NCET-04-0325).
文摘The FRF estimator based on the errors-in-variables (EV) model of multi-input multi-output (MIMO) system is presented to reduce the bias error of FRF HI estimator. The FRF HI estimator is influenced by the noises in the inputs of the system and generates an under-estimation of the true FRF. The FRF estimator based on the EV model takes into account the errors in both the inputs and outputs of the system and would lead to more accurate FRF estimation. The FRF estimator based on the EV model is applied to the waveform replication on the 6-DOF (degree-of-freedom) hydraulic vibration table. The result shows that it is favorable to improve the control precision of the MIMO vibration control system.
基金supported by the Fundamental Research Funds for the Central Universities (No. NS2015008)the corresponding work was performed in the State Key Laboratory of Mechanics and Control of Mechanical Structures
文摘Noises always disturb the control effect of an environment test especially in multi-input multi-output(MIMO) systems. If the frequency response function matrices are ill-conditioned, the noises in the driving forces will be amplified and the response spectral lines may awfully exceed their tolerances. Most of the major biases between the response spectra and the reference spectra are produced by the amplified noises. However, ordinary control algorithms can hardly reduce the level of noises. The influences of the noises on both the auto- and cross-power spectra are analyzed in this paper. As a conventional frequency domain method on the inverse problem, the Tikhonov filter is adopted in the environment test to suppress the exceeding spectral lines. By altering regularization parameters gradually, the auto-power spectra can be improved in a closed control loop. Instead of using the traditional way of selecting regularization parameters, we observe the coherence change to estimate noise eliminations. Incidentally, the requirement of coherence control can be realized. The errors of the phase are then studied and a phase control algorithm is introduced at the end as a supplement of cross-power spectra control. The Tikhonov filter and the proposed phase control algorithm are tested numerically and experimentally. The results show that the noises in the vicinity of lightly damped resonant peaks are more stubborn. The response spectra are able to be greatly improved by the combination of these two methods.
基金supported by Islamic Azad University–Ardabil Branch。
文摘In this study, a novel approach for dynamic modeling and closed-loop control of hybrid grid-connected renewable energy system with multi-input multi-output(MIMO) controller is proposed. The studied converter includes two parallel DC-DC boost converters, which are connected into the power grid through a single-phase H-bridge inverter. The proposed MIMO controller is developed for maximum power point tracking of photovoltaic(PV)/fuel-cell(FC) input power sources and output power control of the grid-connected DC-AC inverter. Considering circuit topology of the system, a unique MIMO model is proposed for the analysis of the entire system. A unique model of the system includes all of the circuit state variables in DCDC and DC-AC converters. In fact, from the viewpoint of closed-loop controller design, the hybrid grid-connected energy system is an MIMO system. The control inputs of the system are duty cycles of the DC-DC boost converters and the amplitude modulation index of DC-AC inverters. Furthermore, the control outputs are the output power of the PV/FC input power sources as well as AC power injected into the power grid. After the development of the unique model for the entire system, a decoupling network is introduced for system input-output linearization due to inherent connection of the control outputs with all of the system inputs. Considering the decoupled model and small signal linearization, the required linear controllers are designed to adjust the outputs. Finally, to evaluate the accuracy and effectiveness of the designed controllers, the PV/FC based grid-connected system is simulated using the MATLAB/Simulink toolbox.
基金supported by National Natural Science Foundation of China (No. 60874116)Natural Science Foundation of Hebei Province (No. F2009000857)
文摘A form of iterative learning control (ILC) is used to update the set-point for the local controller. It is referred to as set-point-related (SPR) indirect ILC. SPR indirect ILC has shown excellent performance: as a supervision module for the local controller, ILC can improve the tracking performance of the closed-loop system along the batch direction. In this study, an ILC-based P-type controller is proposed for multi-input multi-output (MIMO) linear batch processes, where a P-type controller is used to design the control signal directly and an ILC module is used to update the set-point for the P-type controller. Under the proposed ILC-based P-type controller, the closed-loop system can be transformed to a 2-dimensional (2D) Roesser s system. Based on the 2D system framework, a sufficient condition for asymptotic stability of the closed-loop system is derived in this paper. In terms of the average tracking error (ATE), the closed-loop control performance under the proposed algorithm can be improved from batch to batch, even though there are repetitive disturbances. A numerical example is used to validate the proposed results.
文摘A new semi-blind adaptive beamforming scheme is proposed for multi-input multi-output (MIMO) induced and spacedivision multiple-access based wireless systems that employ high order phase shift keying signaling. A minimum number of training symbols, very close to the number of receiver antenna elements, are used to provide a rough initial least squares estimate of the beamformer's weight vector. A novel cost function combining the constant modulus criterion with decision-directed adaptation is adopted to adapt the beamformer weight vector. This cost function can be approximated as a quadratic form with a closed-form solution, based on which we then derive the recursive least squares (RLS) semi-blind adaptive beamforming algorithm. This semi-blind adaptive beamforming scheme is capable of converging fast to the minimum mean-square-error beamforming solution, as demonstrated in our simulation study. Our proposed semi-blind RLS beamforming algorithm therefore provides an efficient detection scheme for the future generation of MIMO aided mobile communication systems.
基金supported by the National Science Fund for Distinguished Young Scholars (60725105)the National Basic Research Program of China (2009CB320404)+5 种基金the Program for Changjiang Scholars and Innovative Research Team in University (IRT0852)the Hi-Tech Research and Development Program of China (2007AA01Z288)the 111 Project (B08038)the National Natural Science Foundation of China (60702057)the Key Project of Chinese Ministry of Education (107103)the Fundamental Research Funds for the Central Universities (JY10000901030) and ISN02080001
文摘Uniform channel decomposition (UCD) has been proven to be optimal in bit error rate (BER) performance and strictly capacity lossless when perfect channel state information (CSI) is assumed to be available at both the transmitter and receiver side. In practice,CSI can be obtained by channel estimation at receiver and conveyed to transmitter via a limited-rate feedback channel. In such case,the implementation of traditional UCD by treating the imperfect CSI as perfect CSI cause significant performance degradation due to inevitable channel estimation error and vector quantization error. To overcome this problem,a practical robust UCD scheme was proposed in this paper,which includes two steps,firstly,a matching architecture was proposed to eliminate the mismatch between CSI at receiver (CSIR) and CSI at transmitter (CSIT),secondly,an MMSE based robust UCD scheme considering channel estimation error and vector quantization error as an integral part of the design was derived. Simulation results show that the proposed practical robust UCD scheme is capable of improving the BER performance greatly in the context of channel estimation error and vector quantization error compared with the traditional UCD scheme.
文摘This paper presents the design of decentralized repetitive control (RC) for multi-input multi-output (MIMO) systems. An optimization method is used to obtain a RC compensator that ensures system stability and good tracking performance. The designed compensator is in the form of a stable, low order, and causal filter, in which the compensator can be implemented separately without being merged with the RC internal model. This will reduce complexity in the implementation. Simulation results and comparison study are given to demonstrate the effectiveness of the proposed design. The novelty of design is also verified in experiments on a 2 degrees of freedom (DOF) robot.
基金Supported by the National Natural Science Foundation of China(Nos. 60675002 and 60496311)the Basic Research Foundation of Tsinghua National Laboratory for Information Science and Technology (TNList)
文摘As a generalization of orthogonal frequency-division multiplexing (OFDM) systems, multi-input multi-output (MIMO) OFDM systems are very sensitive to carrier frequency offset (CFO). This paper proposes a blind CFO estimation method based on power spectrum analysis, which has high bandwidth efficiency and is much less complex. This method can be used to estimate the residual CFO, which is less than half of the subcarrier spacing. The method uses a cosine cost function to get a closed-form CFO estimate. Simulation results illustrate that the method is effective for MIMO OFDM systems.