An electron beam irradiation-assisted coating method for the regulation of hydrophilicity and hydrophobicity

Developing a stable,reliable,and industrially compatible method to control hydrophobicity is crucial for separation,transportation,and the generation of special surfaces.An e-HMS-PDMS silica gel nanoparticle coating was prepared using a two-step electron beam irradiation(EBI)process,consisting of(i)grafting of two organic groups onto thiol-functionalized hollow mesoporous silica(HMS-SH)with 10 MeV EBI and(ii)curing of polydimethylsiloxane(PDMS)onto silicone rubber using the HMS hybrid materials prepared in step i as an additive with 200 keV EBI.The tuneable grafting of functional groups and the surface properties of the silica,which was embedded in the PDMS layer,allowed us to precisely control the hydrophilicity of the PDMS layer by means of altering the grafting gradient of the silica and the loading ratio of the monomers.A diverse range of vinyl-structured monomers can be used in this method,and the selection of suitable monomers is vital in determining the physical properties of the coating layer.The hydrophilicity of the coating can be linearly controlled within a specific range(50°to 155°)by using suitable monomers,allowing for the design of surfaces with specific hydrophilic and hydrophobic requirements.

Research on degradation of 2, 4 dichlorophenol and pentachlorophenol in water by electron beam irradiation

Electron beam was successfully used for the degradation of 2,4-dichlorophenol (2,4-DCP) and pentachlorophenol (PCP) in water. The effects of radiation doses on substrate degradation and dechlorination of solutions with concentrations of 50 mg/L for both chlorophenols were investigated. The effects of initial concentration, pH and absence of oxygen on the degradation were also investigated. The concentrations of 2,4-DCP and PCP remaining in solution after irradiation were measured by high-performance liquid chromatograph (HPLC). The results showed that an increased radiation dose led to increased degradation of the chlorophenols and increased Cl- yields. In all cases, the rate of degradation was found to be higher than the corresponding inorganic chloride yield from the parent compound. Deoxygenation was also found to increase the rate of degradation of the chlorophenols in water while degradation under alkaline condition was lower than at low to neutral pH.

Effects of Heavy-ion Beams Irradiation on Survival Rate and Antioxidant Enzymes of Sweet Sorghum Seedlings

[Objective] This study aimed to investigate the effects of heavy-ion beams irradiation on the seed germination potential, survival rate, antioxidant enzyme activi- ties and lipid peroxidation of sweet sorghum. [Method] The dry seeds were irradiated by ＇2（36. heavy ion beams with absorbed doses： 0, 40, 80, 120, 160 and 200 Gy, respectively. Then, the seed germination potential, survival rate, antioxidant enzyme activities and lipid peroxidation of sweet sorghum were measured. [Result] Heavy-ion beams irradiation exhibited different influence on germination potential and survival rates. Germination rate showed a downward trend, but the corresponding survival curve of seedlings was saddle-shaped. The activities of SOD, POD, CAT and ASA- POD changed in different trends as well. The MDA content rose toward increasing irradiation dose, suggesting that high dose of heavy-ion beams irradiation enhanced the damage to membrane of sweet sorghum seedlings. [Conclusion] After being irra- diated, germination potential and survival rates of sweet sorghum were decreased, and antioxidant enzymes activity changed greatly. This study laid the basis for fur- ther work on breeding and improvement of sweet sorghum irradiated by ,^（12）C^（6＋） heavy ion beams.

Storage Stability in Reversion Mutation of a Rice Line Devoid of LOX-1, 2 Acquired by Ion Beam Irradiation

The effect of absence of lipoxygenase isoenzyme （LOX） on storage stability was investigated. Rice mutant 1297 without lipoxygenase isoenzyme-1 （LOX-1） or lipoxygenase isoenzyme-2 （LOX-2） generated by ion beam irradiation from Wanjian2090 and reversion mutant RM1297 with LOX-1 and LOX-2 were subjected to an accelerated-aging experiment. Shanyou63 （with LOX-1 and LOX-2 ） served as control. Results showed that the germination and dehydrogenase activity decreased while the electrical conductivity and free fatty acid content increased in all varieties with accelerated aging. In 1297 that lacked LOX-1 and 2, there were slight changes in germination, dehydrogenase activity, membrane permeability and free fatty acid content during the thirty-day accelerated-aging experiment. But in varieties with LOX-1 and LOX-2, significant changes were observed, suggesting that LOX-1, 2 might be a definite factor which influenced seed lifespan. This study also indicates that ion beam irradiation may be used as mutagen to generate mutant and reversion mutants for biological study and could become a new direction in ion beam application.

Synthesis of a Ag/Ag Cl/PLA membrane under electron beam irradiation for the photocatalytic degradation of methylene blue and chloramphenicol

Polylactic acid(PLA)has been extensively applied in the fields of biology and renewable biodegradable materials because of its superior biodegradability.PLA has excellent potential as a renewable biodegradable adsorbent in wastewater treatment.However,its poor photocatalytic properties have hindered its practical application.In this study,polyvinylpyrrolidone(PVPP)or glutaraldehyde(GA)was utilized as an adhesive agent to prepare Ag/AgCl/PLA photocatalysts with highly efficient visible light photocatalysis on a PLA fabric by utilizing the electron beam irradiation method.The photocatalytic activities of the Ag/AgCl/PLA samples were examined under visible light irradiation to analyze the degradation of methylene blue(MB)and chloramphenicol(CPL).Our experimental results demonstrate that the nanomaterial Ag/AgCl was uniformly distributed on the PLA fiber surface;this can be attributed to the effects of the crosslinking PVPP or GA.Under electron beam irradiation,adding crosslinking PVPP(or GA)is beneficial to the loading of Ag/AgCl onto the PLA.For the composite Ag/AgCl/PLA,the degradation rate for MB was as high as 97% after 150 min of visible light irradiation.The addition of 4 mg/ml of Ag/AgCl solution resulted in the greatest photocatalytic activity for CPL,and we advanced the possible degradation pathways of CPL with the best sample.Additionally,the as-prepared composite Ag/Ag Cl/PLA exhibited favorable antibacterial activity against E.coli and S.aureus,with a bacterial removal rate of >77%.

In situ TEM investigation of electron irradiation and aging-induced high-density nanoprecipitates in an Mg-10Gd-3Y-1Zn-0.5Zr alloy

In-situ electron irradiation and aging are applied to introduce high-density precipitates in an Mg-10Gd-3Y-1Zn-0.5Zr(GWZ1031K,wt.%)alloy to improve the hardness.The results show that the hardness of the Mg alloy after irradiation for 10 h and aging for 9 h at 250℃ is 1.64 GPa,which is approximately 64% higher than that of the samples before being treated.It is mainly attributed to γ'precipitates on the basal plane after irradiation and the high-density nanoscale β'precipitates on the prismatic plane after aging,which should be closely related to the irradiation-induced homogenous clusters.The latter plays a key role in precipitation hardening.This result paves a way to improve the mechanical properties of metallic materials by tailoring the precipitation through irradiation and aging.

Protective Effects of Shikonin on Brain Injury Induced by Carbon Ion Beam Irradiation in Mice

Radiation encephalopathy is the main complication of cranial radiotherapy. It can cause necrosis of brain tissue and cognitive dysfunction. Our previous work had proved that a natural antioxidant shikonin possessed protective effect on cerebral ischemic injury. Here we investigated the effects of shikonin on carbon ion beam induced radiation brain injury in mice. Pretreatment with shikonin significantly increased the SOD and CAT activities and the ratio of GSH/GSSG in mouse brain tissues compared with irradiated group （P〈0.01）, while obviously reduced the MDA and PCO contents and the RO$ levels derived from of the brain mitochondria.

Electron beam irradiation on novel coronavirus(COVID-19):A Monte-Carlo simulation

The novel coronavirus pneumonia triggered by COVID-19 is now raging the whole world.As a rapid and reliable killing COVID-19 method in industry,electron beam irradiation can interact with virus molecules and destroy their activity.With the unexpected appearance and quickly spreading of the virus,it is urgently necessary to figure out the mechanism of electron beam irradiation on COVID-19.In this study,we establish a virus structure and molecule model based on the detected gene sequence of Wuhan patient,and calculate irradiated electron interaction with virus atoms via a Monte Carlo simulation that track each elastic and inelastic collision of all electrons.The characteristics of irradiation damage on COVID-19,atoms’ionizations and electron energy losses are calculated and analyzed with regions.We simulate the different situations of incident electron energy for evaluating the influence of incident energy on virus damage.It is found that under the major protecting of an envelope protein layer,the inner RNA suffers the minimal damage.The damage for a^100-nm-diameter virus molecule is not always enhanced by irradiation energy monotonicity,for COVID-19,the irradiation electron energy of the strongest energy loss damage is 2 keV.

Effect of Different Doses of Electron Beam Irradiation on the Structure of PAN Precursor Fibers and Resultant Stabilized Fibers

Different doses of electron beam was imposed on the polyacrylonitrile（PAN） precursor fibers before the fibers were stabilized. The effect of electron beam irradiation on the chemical structure, crystallite size of PAN precursor fibers and density, oxygen content, transverse section morphology of the stabilized fibers in the stabilization process were characterized by the use of fourier transform infrared spectroscopy（FTIR）, float- sink procedure, elemental analysis and scanning electron microscope（SEM）, respectively. The results showed that the extent of cyclization was increased and the crystallite size was decreased. We found that electron beam irradiation could accelerate the cyelization reaction and stabilization reaction in the stabilization process through density test and elemental analysis. We also found that the effect of 200 kGy electron beam irradiated fibers with the stabilization time of 75 min was better than that of the original stabilized fibers with 90 min. These results demonstrate that electron beam irradiation can shorten the stabilization time.

Study on Screening of TaGA2ox1 Mutants in Wheat by Ion Beam Irradiation

As a kind of mutagen, ion beam irradiation can create abundant biological mutations. A population of about 2000 lines was generated by irradiating dry wheat seeds of XiaoYan 81 with low-energy nitrogen ion beams. The traits of the plant, such as height, spike type, fertility, stem color and awn length, were investigated. The mutation rate in terms of the plant height in M2 was 2.9%. Eighteen deletion mutants of TaGA2ox1 were obtained. Associate analysis showed that TaGA2ox1 was closely related to the plant height. Most of the TaGA2ox1-deleted mutants were higher than the control, suggesting that the biological function of TaGA2ox1 is similar to its homologues in other plants. These results demonstrate that ion beam irradiation is an efficient tool in the construction of a mutant library for wheat.

Decomposition mechanism of chloramphenicol under electron beam irradiation

The purpose of this study was to evaluate the potential of electron beam to decompose chloramphenicol （CAP） in aqueous solutions. At the absorbed dose of 15 kGy, the decomposition rate of CAP was 95.24%. The degradation of CAP under electron beam irradiation followed pseudo-first-order kinetics. Redox reactions of CAP aqueous solutions with hydroxyl radicals （.OH）, hydrated electrons （eaq） and hydrated atoms （·H） were studied. The increase of the additives would result in the decrease of the degradation efficiency. The concentration of Cl- and NO3- in aqueous solution increased after electron beam irradiation. On the basis of the experimental results, a photocatalytic mechanism was discussed. The rate constant for reactions of .OH and CAP was 9.36×10^7 L/（mol.s） and for reaction of eaq and CAP was 7.33×10^7 L/（mol.s）..OH was supposed to play the key role in the radiation system of aqueous solution. Other free radicals like eaq and .H could also initiate the degradation.

Quantitative Assessment of Amino Acid Damage upon keV Ion Beam Irradiation Through FTIR Spectroscopy

Ion beam irradiation induces important biological effects and it is a long-standing task to acquire both qualitative and quantitative assessment of these effects. One effective way in the investigation is to utilize Fourier transformation infrared （FTIR） spectroscopy because it can offer sensitive and non-invasive measurements. In this paper a novel protocol was employed to prepare biomolecular samples in the form of thin and transversely uniform solid films that were suitable for both infrared and low-energy ion beam irradiation experiments. Under the irradiation of N^＋ and Ar^＋ ion beams of 25 keV with fluence ranging from 5×10^15 ions/cm^2 to 2.5×10^16 ions/cm^2, the ion radio-sensitivity of four amino acids, namely, glycine, tyrosine, methionine and phenylalanine, were evaluated and compared. The ion beam irradiation caused biomolecular decomposition accompanied by molecular desorption of volatile species and the damage was dependent on ion type, fiuence, energy and types of amino acids. The effectiveness of application of FTIR spectroscopy to the quantitative assessment of biomolecular damage dose effect induced by low-energy ion radiation was thus demonstrated.

Research on Irradiation Electric Field for Charged Particles Beam with High Energy

Irradiation protection of the nonlinear optical devices used in the spacecraft and next generation active laser system must be solved. The first problem was to find the irradiation damage mechanism of the nonlinear materials. In this paper the irradiation electronic field originating from high speed charged particle beams was discussed. The calculating model of the electronic field, based on the relativistic mechanics and electro-magnetic theory, was founded. The common characters of the irradiation electronic field were predicted and the fields of α ray and β ray were calculated by means of our model. The simulating results showed that the intensity of the electric field increased with the energy or the intensity of the beam. The results also showed that the field change trend of α ray and β ray was similar, but the field value was quite different. When the beam intensity I = 100 μA and the beam energy εm = 500 Mev, the electronic field values were about 3.5 × 107 v/m for α ray and 2.4 × 1011 v/m for β ray.

Dose inter-comparison studies for ^(60)Co gamma-ray and electron beam irradiation in the year 2002

Dose inter-comparison studies for Co γ-ray and 10 MeV electron beam irradiation were carried out 60 from July to October in 2002. The purpose of the studies was to check the reliability of the alanine-PE film dosime- ters made by CIAE, which will be used as transfer standard dosimetry system mainly for electron beam irradiation. The expanded uncertainty of CIAE alanine/EPR dosimetry system was 4.1% for doses not higher than 10 kGy and 5.4% for those above 10 kGy (k=2). CIAE alanine-PE film dosimeters were sent to JAERI, RISO (National Labora- tory in Denmark) and INCT respectively, which were irradiated by Co gamma-rays or electron beams in each labo- 60 ratory. The irradiated dosimeters were then sent back to CIAE for electron paramagnetic resonance (EPR) analysis. The agreements were obtained to be ±1.9% for gamma-ray dose measurement and ±4.3% for electron beam dose measurement, which were all within the combined uncertainty of the reference and CIAE alanine/EPR dosimetry system. Furthermore, the overall mean ratio was found to be 0.995 with 1.8% in the coefficient of variation (CV). The preliminary inter-comparison studies indicated that CIAE film alanine/EPR dosimetry system had the potential to be used as a transfer dosimetry system for high dose measurement.

Influence of high-intensity pulsed ion beams irradiation on oxidation behavior of 316L stainless steel at 700℃

316L stainless steel samples, as a widespread used material, were irradiated with HIPIB at the beam parameters of ion energy 300 keV, current density 100, 200 and 300 A/cm2, shot number 10 and pulse duration 75 ns. The surface morphology and the phase structure in the near surface region of original and treated samples were analyzed with scanning electron microscopy (SEM) and X-ray diffractometry (XRD). It is shown that the HIPIB irradiation can smooth the surface of the samples, and the preferred orientation is present in the surface layer of irradiated coupons. The influence of HIPIB irradiation on the oxidation behavior of 316L stainless steel at 700℃for up to 100 h was investigated. Electron probe microanalysis (EPMA) was used to study the distribution of elements in the oxidation products. It is found that the oxidation behavior of the irradiated coupons depends greatly on the ion current density of HIPIB. HIPIB irradiation with ion current density of 100 A/cm2 slightly reduces the oxidation rate with respect to the unirradiated coupon. The improvement of the oxidation resistance can be attributed to more oxide of Cr that forms on the surface of the irradiated coupons. In contrast, HIPIB irradiation with ion current density of 200 or 300 A/cm2 is proved to be detrimental, causing a higher oxidation rate.

Improvement of the Sensitivity of ZnGa_2O_4 Gas Sensors by Electron Beam Irradiation

In the present paper,the electron beam irradiation was used to improve gas sensing properties of ZnGa_2O_4 gas sensors.The effects of electron beam irradiation on the performance of ZnGa_2O_4 gas sensors were reported.Results show that the sensitivity of ZnGa_2O_4 gas sensors to various gases increased after electron beam irradiation,and the optimal working temperature decreased.The effect of irradiation dose and the reaction mechanism were discussed.

Study on DNA Damage Induced by Neon Beam Irradiation in Saccharomyces Cerevisiae

Yeast strain Saccharornyces cerevisiae was irradiated with different doses of 85 MeV/u 20 Ne 10＋ to investigate DNA damage induced by heavy ion beam in eukaryotic microorganism. The survival rate, DNA double strand breaks （DSBs） and DNA polymorphic were tested after irradiation. The results showed that there were substantial differences in DNA between the control and irradiated samples. At the dose of 40 Gy, the yeast cell survival rate approached 50%, DNA double-strand breaks were barely detectable, and significant DNA polymorphism was observed. The alcohol dehydrogenase II gene was amplified and sequenced. It was observed that base changes in the mutant were mainly transversions of T-G and T-C. It can be concluded that heavy ion beam irradiation can lead to change in single gene and may be an effective way to induce mutation.

Non-Uniformity of Heavy-Ion Beam Irradiation on a Direct-Driven Pellet in Inertial Confinement Fusion

Heavy-ion-driven fusion （HIF） is a scheme to achieve inertial confinement fusion （ICF）. Investigation of the non-uniformity of heavy-ion beam （HIB） irradiation is one of the key issues for ICF driven by powerful heavy-ion beams. Ions in HIB impinge on the pellet surface and deposit their energy in a relatively deep and wide area. Therefore, the non-uniformity of HIB irradiation should be evaluated in the volume of the deposition area in the absorber layer. By using the OK1 code with some corrections, the non-uniformity of heavy-ion beam irradiation for the different ion beams on two kinds of targets were evaluated in 12-beam, 20-beam, 60-beam and 120-beam irradiation schemes. The root-mean-square （RMS） non-uniformity value becomes aRMS = 8.39% in an aluminum mono-layer pellet structure and aRMS = 6.53% in a lead-aluminum layer target for the 12-uranium-beam system. The RMS non-uniformity for the lead-aluminum layer target was lower than that for the mono-layer target. The RMS and peak-to-valley （PTV） non-uniformities are reduced with the increase in beam number, and low at the Bragg peak layer.

Electrification of mineral particles by electron beam irradiation

A novel way for electrification of mineral particles by electronbeam irradiation was proposed. The effect of irradiation dose oncharge/mass ratio was investigated experimentally. The charge/massratio of electrified mineral powders after irradiation was meas- uredby an instrument based on the principle of electrostatic induction.The experimental results showed that the charge/mass ratio is lar-gely dependent on radiation dose and electric physical properties ofminerals. The mechanism of electrification by electron beam irradi-ation is discussed. it is suggested that the essential ofelectrification by electron beam irradiation is a process ofretardation and charge deposition of incident electrons in materials.