A flexible extra broadband metamaterial absorber(MMA)stacked with five layers working at 2 GHz–40 GHz is investigated.Each layer is composed of polyvinyl chloride(PVC),polyimide(PI),and a frequency selective surface(...A flexible extra broadband metamaterial absorber(MMA)stacked with five layers working at 2 GHz–40 GHz is investigated.Each layer is composed of polyvinyl chloride(PVC),polyimide(PI),and a frequency selective surface(FSS),which is printed on PI using conductive ink.To investigate this absorber,both one-dimensional analogous circuit analysis and three-dimensional full-wave simulation based on a physical model are provided.Various crucial electromagnetic properties,such as absorption,effective impedance,complex permittivity and permeability,electric current distribution and magnetic field distribution at resonant peak points,are studied in detail.Analysis shows that the working frequency of this absorber covers entire S,C,X,Ku,K and Ka bands with a minimum thickness of 0.098λ_(max)(λ_(max) is the maximum wavelength in the absorption band),and the fractional bandwidth(FBW)reaches 181.1%.Moreover,the reflection coefficient is less than-10 dB at 1.998 GHz–40.056 GHz at normal incidence,and the absorptivity of the plane wave is greater than 80%when the incident angle is smaller than 50°.Furthermore,the proposed absorber is experimentally validated,and the experimental results show good agreement with the simulation results,which demonstrates the potential applicability of this absorber at 2 GHz–40 GHz.展开更多
This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the cha...This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.展开更多
Multi-layer sandstone reservoirs occur globally and are currently in international production. The 3D characteristics of these reservoirs are too complicated to be accurately delineated by general structural-facies-re...Multi-layer sandstone reservoirs occur globally and are currently in international production. The 3D characteristics of these reservoirs are too complicated to be accurately delineated by general structural-facies-reservoir modelling. In view of the special geological features, such as the vertical architecture of sandstone and mudstone interbeds, the lateral stable sedimentation and the strong heterogeneity of reservoir poroperm and fluid distribution, we developed a new three-stage and six-phase procedure for 3D characterization of multi-layer sandstone reservoirs. The procedure comprises two-phase structural modelling, two-phase facies modelling and modelling of two types of reservoir properties. Using this procedure, we established models of the formation structure, sand body structure and microfacies, reservoir facies and properties including porosity, permeability and gas saturation and provided a 3D fine-scale, systematic characterization of the Sebei multi-layer sandstone gas field, China. This new procedure, validated by the Sebei gas field, can be applied to characterize similar multi-layer sandstone reservoirs.展开更多
Explosive synchronization(ES)is a kind of first-order jump phenomenon that exists in physical and biological systems.In recent years,researchers have focused on ES between single-layer and multi-layer networks.Most re...Explosive synchronization(ES)is a kind of first-order jump phenomenon that exists in physical and biological systems.In recent years,researchers have focused on ES between single-layer and multi-layer networks.Most research on complex networks with delay has focused on single-layer or double-layer networks,multi-layer networks are seldom explored.In this paper,we propose a Kuramoto model of frequency weights in multi-layer complex networks with delay and star connections between layers.Through theoretical analysis and numerical verification,the factors affecting the backward critical coupling strength are analyzed.The results show that the interaction between layers and the average node degree has a direct effect on the backward critical coupling strength of each layer network.The location of the delay,the size of the delay,the number of network layers,the number of nodes,and the network topology are revealed to have no direct impact on the backward critical coupling strength of the network.Delay is introduced to explore the influence of delay and other related parameters on ES.展开更多
In a large area of the east—central Asian continent there is a unified seismic network system composed of two families of large—seismic belts that intersect conjugately. Such a seismic network in the middle—upper c...In a large area of the east—central Asian continent there is a unified seismic network system composed of two families of large—seismic belts that intersect conjugately. Such a seismic network in the middle—upper crust is actually a response to the plastic flow network in the lower lithosphere including the lower crust and lithospheric mantle. The existence of the unified plastic flow system confirms that the driving force for intraplate tectonic deformation results mainly from the compression of the India plate, while the long-range transmission of the force is carried out chiefly by means of plastic flow. The plastic flow network has a control over the intraplate tectonic deformation.展开更多
In this paper, the new model of the real gas filtration problem has been presented multi-layered gas reservoir, when a gas well output and wellbore storage may be variable, and have obtained the exact solutions of pre...In this paper, the new model of the real gas filtration problem has been presented multi-layered gas reservoir, when a gas well output and wellbore storage may be variable, and have obtained the exact solutions of pressure distribution for each reservoir bed under three kinds of typical out-boundary conditions. As a special case, according to the new model have also obtained the qxact solutions of presssure distribution in homogeneous reservoir and is given important application in gas reservoir development.展开更多
The large-scale population accumulation in modem cities has become one of their important characteristics. With the development of urbanization in the world, the large-scale gathering activities are increasing, and th...The large-scale population accumulation in modem cities has become one of their important characteristics. With the development of urbanization in the world, the large-scale gathering activities are increasing, and the accidents caused by them are also rising. At the same time, the evacuation of visitors is faced with severe challenges in the event of an emergency such as terrorist attacks. The main problem for tourists is how to evacuate quickly and safely in an emergency. The Louvre is one of the largest and most visited art museums in the world.Visitors are large and come from all over the world, the volume of passengers varies greatly, and the interior architecture design is complicated, etc. These characteristics challenge the design of evacuation paths. Based on the consideration of these factors, we should develop the optimal evacuation scheme and minimize the accident risk and evacuation cost.展开更多
Based on the static compression experiments, the compressive stress-strain curve of multi-layer corrugated boards is simplified into three sections of linear elasticity, sub-buckling going with local collapse and dens...Based on the static compression experiments, the compressive stress-strain curve of multi-layer corrugated boards is simplified into three sections of linear elasticity, sub-buckling going with local collapse and densification. By considering the structure factors of multi-layer corrugated boards, the energy absorption model is obtained and characterized by the structure factors of corrugated cell-wall. The model is standardized by the solid modulus and it is universal for corrugated structures of different basis material. In the liner-elastic section, with the increase of the load, the energy absorption per unit volume of multi-layer corrugated boards gradually increases; in the sub-buckling section going with local collapse, the compression resistance of multi-layer corrugated boards goes on under a nearly constant load, but the energy absorption per unit volume rapidly increases with the increase of the compression strain. It is shown as an ascending curve in the energy absorption diagram. In the densification section, the corrugated sandwich core has no energy absorption capability. A good consistency is achieved between theoretical and experimental energy absorption curves. In designing the cushioning package, the cushioning properties can be evaluated by the theoretical model without more experiments. The suggested method to develop the energy absorption diagram for corrugated boards can be used to characterize the cushioning properties and optimize the structures of corrugated sandwich structures.展开更多
We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals (PFM) in the low frequency range. PFM is simplified as an equivalent idealized sheet with...We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals (PFM) in the low frequency range. PFM is simplified as an equivalent idealized sheet with all metallic fibers aligned in one direction and distributed in periodic hexagonal patterns. We use a phenomenological model in the literature to investigate the effects of pore geometrical parameters (fiber diameter and gap) on sound absorption performance. The sound absorption coefficient of multi- layered PFMs is calculated using impedance translation theorem, To demonstrate the validity of the present model, we compare the predicted results with the experimental data. With the average sound absorption (low frequency range) as the objective function and the fiber gaps as the design variables, an optimization method for multi-layered fibrous metals is proposed. A new fibrous layout with given porosity of multi-layered fibrous metals is suggested to achieve optimal low frequency sound absorption. The sound absorption coefficient of the optimal multi-layered fibrous metal is higher than the single- layered fibrous metal, and a significant effect of the fibrous material on sound absorption is found due to the surface Dorosity of the multi-layered fibrous.展开更多
Technologically, multi-layer fluid models are important in understanding fluid-fluid or fluid-nanoparticle interactions and their effects on flow and heat transfer characteristics. However, to the best of the authors...Technologically, multi-layer fluid models are important in understanding fluid-fluid or fluid-nanoparticle interactions and their effects on flow and heat transfer characteristics. However, to the best of the authors' knowledge, little attention has been paid to the study of three-layer fluid models with nanofluids. Therefore, a three-layer fluid flow model with nanofluids is formulated in this paper. The governing coupled nonlinear differential equations of the problem are non-dimensionalized by using appropriate fundamental quantities. The resulting multi-point boundary value problem is solved numerically by quasi-linearization and Richardson's extrapolation with modified boundary conditions. The effects of the model parameters on the flow and heat transfer are obtained and analyzed. The results show that an increase in the nanoparticle concentration in the base fluid can modify the fluid-velocity at the interface of the two fluids and reduce the shear not only at the surface of the clear fluid but also at the interface between them. That is, nanofluids play a vital role in modifying the flow phenomena. Therefore, one can use nanofluids to obtain the desired qualities for the multi-fluid flow and heat transfer characteristics.展开更多
Explosive synchronization(ES)is a first-order transition phenomenon that is ubiquitous in various physical and biological systems.In recent years,researchers have focused on explosive synchronization in a single-layer...Explosive synchronization(ES)is a first-order transition phenomenon that is ubiquitous in various physical and biological systems.In recent years,researchers have focused on explosive synchronization in a single-layer network,but few in multi-layer networks.This paper proposes a frequency-weighted Kuramoto model in multi-layer complex networks with star connection between layers and analyzes the factors affecting the backward critical coupling strength by both theoretical analysis and numerical validation.Our results show that the backward critical coupling strength of each layer network is influenced by the inter-layer interaction strength and the average degree.The number of network layers,the number of nodes,and the network topology can not directly affect the synchronization of the network.Enhancing the inter-layer interaction strength can prevent the emergence of explosive synchronization and increasing the average degree can promote the generation of explosive synchronization.展开更多
Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an applic...Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an application pertaining to the safety of light water nuclear reactors.Postulating a core meltdown accident,the behaviour of the core melt(aka corium)into a steel vessel is of tremendous importance when evaluating the vessel integrity.Evaluating correctly the heat fluxes requires the numerical simulation of the interaction between the liquid material and its solid counterpart which forms during the solidification process,but also may melt back.To simulate this configuration,encoun-tered in various industrial applications,one considers a bi-phase model constituted by a liquid phase in contact and interaction with its solid phase.The liquid phase may solidify in presence of low energetic source,while the solid phase may melt due to an intense heat flux from the high-temperature liquid.In the frame of the in-house legacy code,several simplifying assumptions(0D multi-layer discretization,instantaneous heat transfer via a quadratic temperature profile in solids)are made for the modelling of such phase changes.In the present work,these shortcomings are illustrated and further overcome by solving a 2D heat conduction model in the solid by a mixed Raviart-Thomas finite element method coupled to the liquid phase due to heat and mass exchanges through Stefan condition.The liquid phase is modeled with a 0D multi-layer approach.The 0D-liquid and 2D-solid mod-els are coupled by a Stefan like phase change interface model.Several sanity checks are performed to assess the validity of the approach on 1D and 2D academical configurations for which exact or reference solutions are available.Then more advanced situations(genu-ine multi-dimensional phase changes and an"industrial-like scenario")are simulated to verify the appropriate behavior of the obtained coupled simulation scheme.展开更多
The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole process...The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole processing.The problem of optimal control of its drilling force is one of the main factors affecting the quality of micro-hole machining.To address this problem,the thrust forces and torques in PCB drilling were first modeled and analyzed,and the corresponding prediction models were established.The drilling force analysis was carried out through the micro-hole drilling experiment,the specific cutting energy under different feed rates was calculated,the influence of the size effect was clarified,and the accuracy of the prediction model was verified.The result shows that during the drilling of glass fiber cloth,changes in the material removal mechanism are induced as the feed per revolution is varied.When the feed per revolution is less than the tool edge radius,the glass fiber is not cut by the main cutting edge,but is crushed and broken.When the feed per revolution is greater than the radius of the tool edge,the glass fiber is cut by the main cutting edge.At the same time,the established analytical model can accurately reflect the influence of the size effect on the drilling torque in PCB micro-hole drilling,and the error is within 10%.This method has certain practical application value in controlling PCB micro hole processing quality.展开更多
Polymer electrolyte membrane fuel cells(PEMFCs)are considered a promising alternative to internal combustion engines in the automotive sector.Their commercialization is mainly hindered due to the cost and effectivenes...Polymer electrolyte membrane fuel cells(PEMFCs)are considered a promising alternative to internal combustion engines in the automotive sector.Their commercialization is mainly hindered due to the cost and effectiveness of using platinum(Pt)in them.The cathode catalyst layer(CL)is considered a core component in PEMFCs,and its composition often considerably affects the cell performance(V_(cell))also PEMFC fabrication and production(C_(stack))costs.In this study,a data-driven multi-objective optimization analysis is conducted to effectively evaluate the effects of various cathode CL compositions on Vcelland Cstack.Four essential cathode CL parameters,i.e.,platinum loading(L_(Pt)),weight ratio of ionomer to carbon(wt_(I/C)),weight ratio of Pt to carbon(wt_(Pt/c)),and porosity of cathode CL(ε_(cCL)),are considered as the design variables.The simulation results of a three-dimensional,multi-scale,two-phase comprehensive PEMFC model are used to train and test two famous surrogates:multi-layer perceptron(MLP)and response surface analysis(RSA).Their accuracies are verified using root mean square error and adjusted R^(2).MLP which outperforms RSA in terms of prediction capability is then linked to a multi-objective non-dominated sorting genetic algorithmⅡ.Compared to a typical PEMFC stack,the results of the optimal study show that the single-cell voltage,Vcellis improved by 28 m V for the same stack price and the stack cost evaluated through the U.S department of energy cost model is reduced by$5.86/k W for the same stack performance.展开更多
Using the typical characteristics of multi-layered marine and continental transitional gas reservoirs as a basis,a model is developed to predict the related well production rate.This model relies on the fractal theory...Using the typical characteristics of multi-layered marine and continental transitional gas reservoirs as a basis,a model is developed to predict the related well production rate.This model relies on the fractal theory of tortuous capillary bundles and can take into account multiple gas flow mechanisms at the micrometer and nanometer scales,as well as the flow characteristics in different types of thin layers(tight sandstone gas,shale gas,and coalbed gas).Moreover,a source-sink function concept and a pressure drop superposition principle are utilized to introduce a coupled flow model in the reservoir.A semi-analytical solution for the production rate is obtained using a matrix iteration method.A specific well is selected for fitting dynamic production data,and the calculation results show that the tight sandstone has the highest gas production per unit thickness compared with the other types of reservoirs.Moreover,desorption and diffusion of coalbed gas and shale gas can significantly contribute to gas production,and the daily production of these two gases decreases rapidly with decreasing reservoir pressure.Interestingly,the gas production from fractures exhibits an approximately U-shaped distribution,indicating the need to optimize the spacing between clusters during hydraulic fracturing to reduce the area of overlapping fracture control.The coal matrix water saturation significantly affects the coalbed gas production,with higher water saturation leading to lower production.展开更多
Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.A...Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.After a review of the existing theories of wall turbulence,we present a new framework,called the structure ensemble dynamics (SED),which aims at integrating the turbulence dynamics into a quantitative description of the mean flow.The SED theory naturally evolves from a statistical physics understanding of non-equilibrium open systems,such as fluid turbulence, for which mean quantities are intimately coupled with the fluctuation dynamics.Starting from the ensemble-averaged Navier-Stokes(EANS) equations,the theory postulates the existence of a finite number of statistical states yielding a multi-layer picture for wall turbulence.Then,it uses order functions(ratios of terms in the mean momentum as well as energy equations) to characterize the states and transitions between states.Application of the SED analysis to an incompressible channel flow and a compressible turbulent boundary layer shows that the order functions successfully reveal the multi-layer structure for wall-bounded turbulence, which arises as a quantitative extension of the traditional view in terms of sub-layer,buffer layer,log layer and wake. Furthermore,an idea of using a set of hyperbolic functions for modeling transitions between layers is proposed for a quantitative model of order functions across the entire flow domain.We conclude that the SED provides a theoretical framework for expressing the yet-unknown effects of fluctuation structures on the mean quantities,and offers new methods to analyze experimental and simulation data.Combined with asymptotic analysis,it also offers a way to evaluate convergence of simulations.The SED approach successfully describes the dynamics at both momentum and energy levels, in contrast with all prevalent approaches describing the mean velocity profile only.Moreover,the SED theoretical framework is general,independent of the flow system to study, while the actual functional form of the order functions may vary from flow to flow.We assert that as the knowledge of order functions is accumulated and as more flows are analyzed, new principles(such as hierarchy,symmetry,group invariance,etc.) governing the role of turbulent structures in the mean flow properties will be clarified and a viable theory of turbulence might emerge.展开更多
Arnol'd's second nonlinear stability criterion for motions governed by a general multilayer quasi-geostrophic model is established. The model allows arbitrary density jumps and layer thickness, and at the top ...Arnol'd's second nonlinear stability criterion for motions governed by a general multilayer quasi-geostrophic model is established. The model allows arbitrary density jumps and layer thickness, and at the top and the bottom of the nuid, the boundary condition is either free or rigid. The criterion is obtained by the establishment of the upper bounds of disturbance energy and potential enstrophy in terms of the initial disturbance field.展开更多
Electronic Health Records(EHRs)are the digital form of patients’medical reports or records.EHRs facilitate advanced analytics and aid in better decision-making for clinical data.Medical data are very complicated and ...Electronic Health Records(EHRs)are the digital form of patients’medical reports or records.EHRs facilitate advanced analytics and aid in better decision-making for clinical data.Medical data are very complicated and using one classification algorithm to reach good results is difficult.For this reason,we use a combination of classification techniques to reach an efficient and accurate classification model.This model combination is called the Ensemble model.We need to predict new medical data with a high accuracy value in a small processing time.We propose a new ensemble model MDRL which is efficient with different datasets.The MDRL gives the highest accuracy value.It saves the processing time instead of processing four different algorithms sequentially;it executes the four algorithms in parallel.We implement five different algorithms on five variant datasets which are Heart Disease,Health General,Diabetes,Heart Attack,and Covid-19 Datasets.The four algorithms are Random Forest(RF),Decision Tree(DT),Logistic Regression(LR),and Multi-layer Perceptron(MLP).In addition to MDRL(our proposed ensemble model)which includes MLP,DT,RF,and LR together.From our experiments,we conclude that our ensemble model has the best accuracy value for most datasets.We reach that the combination of the Correlation Feature Selection(CFS)algorithm and our ensemble model is the best for giving the highest accuracy value.The accuracy values for our ensemble model based on CFS are 98.86,97.96,100,99.33,and 99.37 for heart disease,health general,Covid-19,heart attack,and diabetes datasets respectively.展开更多
An analytical model based on complex variable theory is proposed to investigate ground responses due to shallow tunneling in multi-layered ground with an arbitrary ground surface load.The ground layers are assumed to ...An analytical model based on complex variable theory is proposed to investigate ground responses due to shallow tunneling in multi-layered ground with an arbitrary ground surface load.The ground layers are assumed to be linear-elastic with full-stick contact between them.To solve the proposed multi-boundary problem,a series of analytic functions is introduced to accurately express the stresses and displacements contributed by different boundaries.Based on the principle of linear-elastic superposition,the multi-boundary problem is converted into a superposition of multiple single-boundary problems.The conformal mappings of different boundaries are independent of each other,which allows the stress and displacement fields to be obtained by the sum of components from each boundary.The analytical results are validated based on numerical and in situ monitoring results.The present model is superior to the classical model for analyzing ground responses of shallow tunneling in multi-layered ground;thus,it can be used with assurance to estimate the ground movement and surface building safety of shallow tunnel constructions beneath surface buildings.Moreover,the solution for the ground stress distribution can be used to estimate the safety of a single-layer composite ground.展开更多
EARLY diagenesis is defined here as a series of physical, chemical and biological reactions operating between depositional particles, porewaters and environmental water medium in the processes of deposition and shallo...EARLY diagenesis is defined here as a series of physical, chemical and biological reactions operating between depositional particles, porewaters and environmental water medium in the processes of deposition and shallow burial. Early diagenesis can produce geochemical succession within deposits, which can be divided from top to bottom into oxidation zone (OX), sulphate reduction zone (SR) and methanogenesis zone (ME). Part of the reaction展开更多
基金Project supported by the China Post-doctoral Science Foundation(Grant No.2020M671834)the Anhui Province Post-doctoral Science Foundation,China(Grant No.2020A397).
文摘A flexible extra broadband metamaterial absorber(MMA)stacked with five layers working at 2 GHz–40 GHz is investigated.Each layer is composed of polyvinyl chloride(PVC),polyimide(PI),and a frequency selective surface(FSS),which is printed on PI using conductive ink.To investigate this absorber,both one-dimensional analogous circuit analysis and three-dimensional full-wave simulation based on a physical model are provided.Various crucial electromagnetic properties,such as absorption,effective impedance,complex permittivity and permeability,electric current distribution and magnetic field distribution at resonant peak points,are studied in detail.Analysis shows that the working frequency of this absorber covers entire S,C,X,Ku,K and Ka bands with a minimum thickness of 0.098λ_(max)(λ_(max) is the maximum wavelength in the absorption band),and the fractional bandwidth(FBW)reaches 181.1%.Moreover,the reflection coefficient is less than-10 dB at 1.998 GHz–40.056 GHz at normal incidence,and the absorptivity of the plane wave is greater than 80%when the incident angle is smaller than 50°.Furthermore,the proposed absorber is experimentally validated,and the experimental results show good agreement with the simulation results,which demonstrates the potential applicability of this absorber at 2 GHz–40 GHz.
基金funded by the National Natural Science Foundation of China(Grant No.11972018,No.12002336)China Postdoctoral Science Foundation(Grant No.2021M701710)。
文摘This article investigates the characteristics of shock wave overpressure generated by multi-layer composite charge under different detonation modes.Combining dimensional analysis and the explosion mechanism of the charge,a peak overpressure prediction model for the composite charge under singlepoint detonation and simultaneous detonation was established.The effects of the charge structure and initiation method on the overpressure field characteristics were investigated in AUTODYN simulation.The accuracy of the prediction model and the reliability of the numerical simulation method were subsequently verified in a series of static explosion experiments.The results reveal that the mass of the inner charge was the key factor determining the peak overpressure of the composite charge under single-point detonation.The peak overpressure in the radial direction improved apparently with an increase in the aspect ratio of the charge.The overpressure curves in the axial direction exhibited a multi-peak phenomenon,and the secondary peak overpressure even exceeded the primary peak at distances of 30D and 40D(where D is the charge diameter).The difference in peak overpressure among azimuth angles of 0-90°gradually decreased with an increase in the propagation distance of the shock wave.The coupled effect of the detonation energy of the inner and outer charge under simultaneous detonation improved the overpressure in both radial and axial directions.The difference in peak overpressure obtained from model prediction and experimental measurements was less than 16.4%.
基金granted by the National Basic Research Program of China(grant no.2014CB239205)National Science and Technology Major Project of China (grant no.20011ZX05030-005-003)
文摘Multi-layer sandstone reservoirs occur globally and are currently in international production. The 3D characteristics of these reservoirs are too complicated to be accurately delineated by general structural-facies-reservoir modelling. In view of the special geological features, such as the vertical architecture of sandstone and mudstone interbeds, the lateral stable sedimentation and the strong heterogeneity of reservoir poroperm and fluid distribution, we developed a new three-stage and six-phase procedure for 3D characterization of multi-layer sandstone reservoirs. The procedure comprises two-phase structural modelling, two-phase facies modelling and modelling of two types of reservoir properties. Using this procedure, we established models of the formation structure, sand body structure and microfacies, reservoir facies and properties including porosity, permeability and gas saturation and provided a 3D fine-scale, systematic characterization of the Sebei multi-layer sandstone gas field, China. This new procedure, validated by the Sebei gas field, can be applied to characterize similar multi-layer sandstone reservoirs.
文摘Explosive synchronization(ES)is a kind of first-order jump phenomenon that exists in physical and biological systems.In recent years,researchers have focused on ES between single-layer and multi-layer networks.Most research on complex networks with delay has focused on single-layer or double-layer networks,multi-layer networks are seldom explored.In this paper,we propose a Kuramoto model of frequency weights in multi-layer complex networks with delay and star connections between layers.Through theoretical analysis and numerical verification,the factors affecting the backward critical coupling strength are analyzed.The results show that the interaction between layers and the average node degree has a direct effect on the backward critical coupling strength of each layer network.The location of the delay,the size of the delay,the number of network layers,the number of nodes,and the network topology are revealed to have no direct impact on the backward critical coupling strength of the network.Delay is introduced to explore the influence of delay and other related parameters on ES.
基金This project (No. 49070196) is funded by the National Science Foundation of China.
文摘In a large area of the east—central Asian continent there is a unified seismic network system composed of two families of large—seismic belts that intersect conjugately. Such a seismic network in the middle—upper crust is actually a response to the plastic flow network in the lower lithosphere including the lower crust and lithospheric mantle. The existence of the unified plastic flow system confirms that the driving force for intraplate tectonic deformation results mainly from the compression of the India plate, while the long-range transmission of the force is carried out chiefly by means of plastic flow. The plastic flow network has a control over the intraplate tectonic deformation.
文摘In this paper, the new model of the real gas filtration problem has been presented multi-layered gas reservoir, when a gas well output and wellbore storage may be variable, and have obtained the exact solutions of pressure distribution for each reservoir bed under three kinds of typical out-boundary conditions. As a special case, according to the new model have also obtained the qxact solutions of presssure distribution in homogeneous reservoir and is given important application in gas reservoir development.
文摘The large-scale population accumulation in modem cities has become one of their important characteristics. With the development of urbanization in the world, the large-scale gathering activities are increasing, and the accidents caused by them are also rising. At the same time, the evacuation of visitors is faced with severe challenges in the event of an emergency such as terrorist attacks. The main problem for tourists is how to evacuate quickly and safely in an emergency. The Louvre is one of the largest and most visited art museums in the world.Visitors are large and come from all over the world, the volume of passengers varies greatly, and the interior architecture design is complicated, etc. These characteristics challenge the design of evacuation paths. Based on the consideration of these factors, we should develop the optimal evacuation scheme and minimize the accident risk and evacuation cost.
基金Funded by the National Natural Science Foundation of China (No.50905120)
文摘Based on the static compression experiments, the compressive stress-strain curve of multi-layer corrugated boards is simplified into three sections of linear elasticity, sub-buckling going with local collapse and densification. By considering the structure factors of multi-layer corrugated boards, the energy absorption model is obtained and characterized by the structure factors of corrugated cell-wall. The model is standardized by the solid modulus and it is universal for corrugated structures of different basis material. In the liner-elastic section, with the increase of the load, the energy absorption per unit volume of multi-layer corrugated boards gradually increases; in the sub-buckling section going with local collapse, the compression resistance of multi-layer corrugated boards goes on under a nearly constant load, but the energy absorption per unit volume rapidly increases with the increase of the compression strain. It is shown as an ascending curve in the energy absorption diagram. In the densification section, the corrugated sandwich core has no energy absorption capability. A good consistency is achieved between theoretical and experimental energy absorption curves. In designing the cushioning package, the cushioning properties can be evaluated by the theoretical model without more experiments. The suggested method to develop the energy absorption diagram for corrugated boards can be used to characterize the cushioning properties and optimize the structures of corrugated sandwich structures.
基金the support of the National Basic Research Program(973 Program)of China(Grant No.2011CB610304)the National Natural Science Foundation of China(Grant Nos.11332004 and 11402046)+2 种基金China Postdoctoral Science Foundation(No.2015M571296)the 111 Project(B14013)the CATIC Industrial Production Projects(Grant No.CXY2013DLLG32)
文摘We present a design method for calculating and optimizing sound absorption coefficient of multi-layered porous fibrous metals (PFM) in the low frequency range. PFM is simplified as an equivalent idealized sheet with all metallic fibers aligned in one direction and distributed in periodic hexagonal patterns. We use a phenomenological model in the literature to investigate the effects of pore geometrical parameters (fiber diameter and gap) on sound absorption performance. The sound absorption coefficient of multi- layered PFMs is calculated using impedance translation theorem, To demonstrate the validity of the present model, we compare the predicted results with the experimental data. With the average sound absorption (low frequency range) as the objective function and the fiber gaps as the design variables, an optimization method for multi-layered fibrous metals is proposed. A new fibrous layout with given porosity of multi-layered fibrous metals is suggested to achieve optimal low frequency sound absorption. The sound absorption coefficient of the optimal multi-layered fibrous metal is higher than the single- layered fibrous metal, and a significant effect of the fibrous material on sound absorption is found due to the surface Dorosity of the multi-layered fibrous.
基金supported by the Imam Khomeini International University of Iran(No.751166-91)
文摘Technologically, multi-layer fluid models are important in understanding fluid-fluid or fluid-nanoparticle interactions and their effects on flow and heat transfer characteristics. However, to the best of the authors' knowledge, little attention has been paid to the study of three-layer fluid models with nanofluids. Therefore, a three-layer fluid flow model with nanofluids is formulated in this paper. The governing coupled nonlinear differential equations of the problem are non-dimensionalized by using appropriate fundamental quantities. The resulting multi-point boundary value problem is solved numerically by quasi-linearization and Richardson's extrapolation with modified boundary conditions. The effects of the model parameters on the flow and heat transfer are obtained and analyzed. The results show that an increase in the nanoparticle concentration in the base fluid can modify the fluid-velocity at the interface of the two fluids and reduce the shear not only at the surface of the clear fluid but also at the interface between them. That is, nanofluids play a vital role in modifying the flow phenomena. Therefore, one can use nanofluids to obtain the desired qualities for the multi-fluid flow and heat transfer characteristics.
文摘Explosive synchronization(ES)is a first-order transition phenomenon that is ubiquitous in various physical and biological systems.In recent years,researchers have focused on explosive synchronization in a single-layer network,but few in multi-layer networks.This paper proposes a frequency-weighted Kuramoto model in multi-layer complex networks with star connection between layers and analyzes the factors affecting the backward critical coupling strength by both theoretical analysis and numerical validation.Our results show that the backward critical coupling strength of each layer network is influenced by the inter-layer interaction strength and the average degree.The number of network layers,the number of nodes,and the network topology can not directly affect the synchronization of the network.Enhancing the inter-layer interaction strength can prevent the emergence of explosive synchronization and increasing the average degree can promote the generation of explosive synchronization.
基金funded by CEA,EDF and Framatomefinancial and scientific support of CEA Cadarache.
文摘Considering phase changes associated with a high-temperature molten material cooled down from the outside,this work presents an improvement of the modelling and the numerical simulation of such processes for an application pertaining to the safety of light water nuclear reactors.Postulating a core meltdown accident,the behaviour of the core melt(aka corium)into a steel vessel is of tremendous importance when evaluating the vessel integrity.Evaluating correctly the heat fluxes requires the numerical simulation of the interaction between the liquid material and its solid counterpart which forms during the solidification process,but also may melt back.To simulate this configuration,encoun-tered in various industrial applications,one considers a bi-phase model constituted by a liquid phase in contact and interaction with its solid phase.The liquid phase may solidify in presence of low energetic source,while the solid phase may melt due to an intense heat flux from the high-temperature liquid.In the frame of the in-house legacy code,several simplifying assumptions(0D multi-layer discretization,instantaneous heat transfer via a quadratic temperature profile in solids)are made for the modelling of such phase changes.In the present work,these shortcomings are illustrated and further overcome by solving a 2D heat conduction model in the solid by a mixed Raviart-Thomas finite element method coupled to the liquid phase due to heat and mass exchanges through Stefan condition.The liquid phase is modeled with a 0D multi-layer approach.The 0D-liquid and 2D-solid mod-els are coupled by a Stefan like phase change interface model.Several sanity checks are performed to assess the validity of the approach on 1D and 2D academical configurations for which exact or reference solutions are available.Then more advanced situations(genu-ine multi-dimensional phase changes and an"industrial-like scenario")are simulated to verify the appropriate behavior of the obtained coupled simulation scheme.
基金National Natural Science Foundation of China(No.51805079)Fundamental Research Funds for the Central Universities,China(No.2232021D-15)Shanghai Science and Technology Program(No.20DZ2251400)。
文摘The quality of printed circuit board(PCB)micro-hole processing directly determines the stability of the inner and outer circuit connections.Micro-hole drilling technology is a typical method for PCB micro-hole processing.The problem of optimal control of its drilling force is one of the main factors affecting the quality of micro-hole machining.To address this problem,the thrust forces and torques in PCB drilling were first modeled and analyzed,and the corresponding prediction models were established.The drilling force analysis was carried out through the micro-hole drilling experiment,the specific cutting energy under different feed rates was calculated,the influence of the size effect was clarified,and the accuracy of the prediction model was verified.The result shows that during the drilling of glass fiber cloth,changes in the material removal mechanism are induced as the feed per revolution is varied.When the feed per revolution is less than the tool edge radius,the glass fiber is not cut by the main cutting edge,but is crushed and broken.When the feed per revolution is greater than the radius of the tool edge,the glass fiber is cut by the main cutting edge.At the same time,the established analytical model can accurately reflect the influence of the size effect on the drilling torque in PCB micro-hole drilling,and the error is within 10%.This method has certain practical application value in controlling PCB micro hole processing quality.
基金supported by the Technology Innovation Program of the Korea Evaluation Institute of Industrial Technology (KEIT)under the Ministry of Trade,Industry and Energy (MOTIE)of Republic of Korea (20012121)by the National Research Foundation of Korea (NRF)grant funded by the Korea government (MSIT) (2022M3J7A106294)。
文摘Polymer electrolyte membrane fuel cells(PEMFCs)are considered a promising alternative to internal combustion engines in the automotive sector.Their commercialization is mainly hindered due to the cost and effectiveness of using platinum(Pt)in them.The cathode catalyst layer(CL)is considered a core component in PEMFCs,and its composition often considerably affects the cell performance(V_(cell))also PEMFC fabrication and production(C_(stack))costs.In this study,a data-driven multi-objective optimization analysis is conducted to effectively evaluate the effects of various cathode CL compositions on Vcelland Cstack.Four essential cathode CL parameters,i.e.,platinum loading(L_(Pt)),weight ratio of ionomer to carbon(wt_(I/C)),weight ratio of Pt to carbon(wt_(Pt/c)),and porosity of cathode CL(ε_(cCL)),are considered as the design variables.The simulation results of a three-dimensional,multi-scale,two-phase comprehensive PEMFC model are used to train and test two famous surrogates:multi-layer perceptron(MLP)and response surface analysis(RSA).Their accuracies are verified using root mean square error and adjusted R^(2).MLP which outperforms RSA in terms of prediction capability is then linked to a multi-objective non-dominated sorting genetic algorithmⅡ.Compared to a typical PEMFC stack,the results of the optimal study show that the single-cell voltage,Vcellis improved by 28 m V for the same stack price and the stack cost evaluated through the U.S department of energy cost model is reduced by$5.86/k W for the same stack performance.
文摘Using the typical characteristics of multi-layered marine and continental transitional gas reservoirs as a basis,a model is developed to predict the related well production rate.This model relies on the fractal theory of tortuous capillary bundles and can take into account multiple gas flow mechanisms at the micrometer and nanometer scales,as well as the flow characteristics in different types of thin layers(tight sandstone gas,shale gas,and coalbed gas).Moreover,a source-sink function concept and a pressure drop superposition principle are utilized to introduce a coupled flow model in the reservoir.A semi-analytical solution for the production rate is obtained using a matrix iteration method.A specific well is selected for fitting dynamic production data,and the calculation results show that the tight sandstone has the highest gas production per unit thickness compared with the other types of reservoirs.Moreover,desorption and diffusion of coalbed gas and shale gas can significantly contribute to gas production,and the daily production of these two gases decreases rapidly with decreasing reservoir pressure.Interestingly,the gas production from fractures exhibits an approximately U-shaped distribution,indicating the need to optimize the spacing between clusters during hydraulic fracturing to reduce the area of overlapping fracture control.The coal matrix water saturation significantly affects the coalbed gas production,with higher water saturation leading to lower production.
基金supported by the National Natural Science Foundation of China(90716008)the National Basic Research Program of China(2009CB724100).
文摘Despite dedicated effort for many decades,statistical description of highly technologically important wall turbulence remains a great challenge.Current models are unfortunately incomplete,or empirical,or qualitative.After a review of the existing theories of wall turbulence,we present a new framework,called the structure ensemble dynamics (SED),which aims at integrating the turbulence dynamics into a quantitative description of the mean flow.The SED theory naturally evolves from a statistical physics understanding of non-equilibrium open systems,such as fluid turbulence, for which mean quantities are intimately coupled with the fluctuation dynamics.Starting from the ensemble-averaged Navier-Stokes(EANS) equations,the theory postulates the existence of a finite number of statistical states yielding a multi-layer picture for wall turbulence.Then,it uses order functions(ratios of terms in the mean momentum as well as energy equations) to characterize the states and transitions between states.Application of the SED analysis to an incompressible channel flow and a compressible turbulent boundary layer shows that the order functions successfully reveal the multi-layer structure for wall-bounded turbulence, which arises as a quantitative extension of the traditional view in terms of sub-layer,buffer layer,log layer and wake. Furthermore,an idea of using a set of hyperbolic functions for modeling transitions between layers is proposed for a quantitative model of order functions across the entire flow domain.We conclude that the SED provides a theoretical framework for expressing the yet-unknown effects of fluctuation structures on the mean quantities,and offers new methods to analyze experimental and simulation data.Combined with asymptotic analysis,it also offers a way to evaluate convergence of simulations.The SED approach successfully describes the dynamics at both momentum and energy levels, in contrast with all prevalent approaches describing the mean velocity profile only.Moreover,the SED theoretical framework is general,independent of the flow system to study, while the actual functional form of the order functions may vary from flow to flow.We assert that as the knowledge of order functions is accumulated and as more flows are analyzed, new principles(such as hierarchy,symmetry,group invariance,etc.) governing the role of turbulent structures in the mean flow properties will be clarified and a viable theory of turbulence might emerge.
文摘Arnol'd's second nonlinear stability criterion for motions governed by a general multilayer quasi-geostrophic model is established. The model allows arbitrary density jumps and layer thickness, and at the top and the bottom of the nuid, the boundary condition is either free or rigid. The criterion is obtained by the establishment of the upper bounds of disturbance energy and potential enstrophy in terms of the initial disturbance field.
文摘Electronic Health Records(EHRs)are the digital form of patients’medical reports or records.EHRs facilitate advanced analytics and aid in better decision-making for clinical data.Medical data are very complicated and using one classification algorithm to reach good results is difficult.For this reason,we use a combination of classification techniques to reach an efficient and accurate classification model.This model combination is called the Ensemble model.We need to predict new medical data with a high accuracy value in a small processing time.We propose a new ensemble model MDRL which is efficient with different datasets.The MDRL gives the highest accuracy value.It saves the processing time instead of processing four different algorithms sequentially;it executes the four algorithms in parallel.We implement five different algorithms on five variant datasets which are Heart Disease,Health General,Diabetes,Heart Attack,and Covid-19 Datasets.The four algorithms are Random Forest(RF),Decision Tree(DT),Logistic Regression(LR),and Multi-layer Perceptron(MLP).In addition to MDRL(our proposed ensemble model)which includes MLP,DT,RF,and LR together.From our experiments,we conclude that our ensemble model has the best accuracy value for most datasets.We reach that the combination of the Correlation Feature Selection(CFS)algorithm and our ensemble model is the best for giving the highest accuracy value.The accuracy values for our ensemble model based on CFS are 98.86,97.96,100,99.33,and 99.37 for heart disease,health general,Covid-19,heart attack,and diabetes datasets respectively.
基金This study was supported by the Fundamental Research Funds for Central Universities(No.2022JBZY041)the National Natural Science Foundation of China(Grant Nos.52208382,51738002,and 52278387).
文摘An analytical model based on complex variable theory is proposed to investigate ground responses due to shallow tunneling in multi-layered ground with an arbitrary ground surface load.The ground layers are assumed to be linear-elastic with full-stick contact between them.To solve the proposed multi-boundary problem,a series of analytic functions is introduced to accurately express the stresses and displacements contributed by different boundaries.Based on the principle of linear-elastic superposition,the multi-boundary problem is converted into a superposition of multiple single-boundary problems.The conformal mappings of different boundaries are independent of each other,which allows the stress and displacement fields to be obtained by the sum of components from each boundary.The analytical results are validated based on numerical and in situ monitoring results.The present model is superior to the classical model for analyzing ground responses of shallow tunneling in multi-layered ground;thus,it can be used with assurance to estimate the ground movement and surface building safety of shallow tunnel constructions beneath surface buildings.Moreover,the solution for the ground stress distribution can be used to estimate the safety of a single-layer composite ground.
文摘EARLY diagenesis is defined here as a series of physical, chemical and biological reactions operating between depositional particles, porewaters and environmental water medium in the processes of deposition and shallow burial. Early diagenesis can produce geochemical succession within deposits, which can be divided from top to bottom into oxidation zone (OX), sulphate reduction zone (SR) and methanogenesis zone (ME). Part of the reaction