Cotton fabrics treated with phase change materials( PCMs)were used in multi-layered fabrics of the fire fighter protective clothing to study its effect on thermal protection. The thermal protective performance( TPP) o...Cotton fabrics treated with phase change materials( PCMs)were used in multi-layered fabrics of the fire fighter protective clothing to study its effect on thermal protection. The thermal protective performance( TPP) of the multi-layered fabrics was measured by a TPP tester under flash fire. Results showed that the utilization of the PCM fabrics improved the thermal protective performance of the multi-layered fabrics. The fabric with a PCM add on of 41. 9% increased the thermal protection by 50. 6% and reduced the time to reach a second degree burn by 8. 4 s compared with the reference fabrics( without PCMs). The employment of the PCM fabrics also reduced the blackened areas on the inner layers. The PCM fabrics with higher PCM melting temperature could bring higher thermal protective performance.展开更多
Thermal protective clothing has been recognized as the primary shielding against emergency fire hazard and inflammable gas leakage. Therefore,the thermal response of human covered with thermal protective clothing unde...Thermal protective clothing has been recognized as the primary shielding against emergency fire hazard and inflammable gas leakage. Therefore,the thermal response of human covered with thermal protective clothing under high temperature is the key work to investigate the thermal insulation of thermal protective clothing. A coupling model composed of thermal protective clothing,air gap and human skin is established and the temperature of the micro-system is numerically solved via the finite element method( FEM).Especially,the heat transfer of air gap located between clothing and human skin considering conduction and radiation is established while the human skin layers involve the effect of blood perfusion. Then the effect of thermophysical properties( thermal conductivity and volumetric capacity) of fabric and thickness of fabric and air on the thermal response of the micro-system is elucidated and compared.The results indicate that the volumetric heat capacity of fabric is the key parameter to affect the thermal shielding performance of thermal protective clothing,and the thicker fabric thickness and air gap thickness can improve the thermal protective properties of the micro-system.展开更多
The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entr...The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entrapped.In this paper,to investigate the effect of air gap width on TPP,a new improved apparatus with two height changeable buttons to hold the thermal sensor was developed to get a series of air gap sizes from 0 mm to 40 mm.The TPP of two types of flame-resistant outer fabrics was measured with TPP test apparatus respectively.Analysis of temperature rise with each air gap width was made to determine the effects of different air gaps on protective performance.It was indicated that air gap size had great effect on TPP of fabrics in the bench top test.An air gap width above 8 mm was suggested for the thermal protective clothing design.展开更多
This paper is to report a prediction model for thermal protective performance of multilayer fabrics based on Matlab neural network toolbox. Then a back propagation (BP) neural network model is developed to predict the...This paper is to report a prediction model for thermal protective performance of multilayer fabrics based on Matlab neural network toolbox. Then a back propagation (BP) neural network model is developed to predict thermal protective performance of multilayer fabrics for firefighters. The network consists of twelve input nodes, six hidden nodes, and one output node. The inputs are weight, thickness, density of warp and weft, limited oxygen index (LOI), and heat conductivity of each-layer fabric. Thermal protective performance (TPP) rating of multilayer fabrics is the output. In this paper, the data from the experiments are used as learning information for the neural network to develop a reliable prediction model. Finnally the model performance is verified, and the proposed model can be applied to predict the thermal protective performance of multilayer fabrics for firefighters.展开更多
In this paper,the protective performance of woven fab-rics against heat radiation is studied from the view offabric structure.As indices reflecting the protective per-formance against heat radiation,the heat emissivit...In this paper,the protective performance of woven fab-rics against heat radiation is studied from the view offabric structure.As indices reflecting the protective per-formance against heat radiation,the heat emissivity andthe transmissivity of different fabrics are measured.It ispointed out that structure changes of common textiles af-fect their transmission to heat radiation while have littleinfluence on their absorption or reflection to heat radi-ation except fabrics surfaces are aluminized.Double-layer weave is proved to be an effective fabric weave forreducing the trasmissivity.It helps increase the densityand tightness while keeps the comfort of woven fabrics atthe same time.展开更多
Disposable medical protective clothing for 2019-nCoV mainly consists of stacked layers with nanopore films,polymer coated nonwoven fabrics and melt-blown nonwoven fabrics against anti-microbial and anti-liquid penetra...Disposable medical protective clothing for 2019-nCoV mainly consists of stacked layers with nanopore films,polymer coated nonwoven fabrics and melt-blown nonwoven fabrics against anti-microbial and anti-liquid penetration.However,such structures lack moisture permeability and breathability leading to an uncomfortable,stuffy wearing experience.Here,we propose a novel medical protective clothing material with a superabsorbent layer to enhance moisture absorption.Poly(acrylic acid-co-acrylamide)/polyvinyl alcohol superabsorbent fibers(PAAAM/PVA fibers)were prepared via wet spinning.And the superabsorbent composite layer was stacked from PAAAM/PVA fibers,bamboo pulp fibers(BPF)and ethylene-propyl-ene side by side fibers(ESF).The novel disposable medical protective composite fabric was obtained through gluing the superabsorbent layer to the inner surface of strong antistatic polypropylene nonwoven fabric.The resultant composite fabric possesses excellent absorption and retention capacity for sweat,up to 12.3 g/g and 63.8%,and a maximum hygroscopic rate of 1.04 g/h,higher than that of the conventional material(only 0.53 g/h).The moisture permeability of the novel material reached 12,638.5 g/(m^(2) d),which was 307.6%of the conventional material.The novel material can effectively reduce the humidity inside the protective clothing and significantly improve the comfort of medical staff.展开更多
基金Fundamental Research Funds for the Central Universities,China(No.14D110715/17/18)Start up Fund by Shanghai University of Engineering Science(No.2015-69)Young Teacher Training Program by Shanghai,China(No.ZZGCD15051))
文摘Cotton fabrics treated with phase change materials( PCMs)were used in multi-layered fabrics of the fire fighter protective clothing to study its effect on thermal protection. The thermal protective performance( TPP) of the multi-layered fabrics was measured by a TPP tester under flash fire. Results showed that the utilization of the PCM fabrics improved the thermal protective performance of the multi-layered fabrics. The fabric with a PCM add on of 41. 9% increased the thermal protection by 50. 6% and reduced the time to reach a second degree burn by 8. 4 s compared with the reference fabrics( without PCMs). The employment of the PCM fabrics also reduced the blackened areas on the inner layers. The PCM fabrics with higher PCM melting temperature could bring higher thermal protective performance.
基金National Natural Science Foundations of China(Nos.51306095,51273097,51403112)China Postdoctoral Science Foundations(Nos.2014M561887,2015T80697)+1 种基金Qingdao Postdoctoral Application Research Funded Project,China(No.14-2-4-1-JCH)Qingdao Application Basic Research Funded Project,China(No.15-9-1-41-JCH)
文摘Thermal protective clothing has been recognized as the primary shielding against emergency fire hazard and inflammable gas leakage. Therefore,the thermal response of human covered with thermal protective clothing under high temperature is the key work to investigate the thermal insulation of thermal protective clothing. A coupling model composed of thermal protective clothing,air gap and human skin is established and the temperature of the micro-system is numerically solved via the finite element method( FEM).Especially,the heat transfer of air gap located between clothing and human skin considering conduction and radiation is established while the human skin layers involve the effect of blood perfusion. Then the effect of thermophysical properties( thermal conductivity and volumetric capacity) of fabric and thickness of fabric and air on the thermal response of the micro-system is elucidated and compared.The results indicate that the volumetric heat capacity of fabric is the key parameter to affect the thermal shielding performance of thermal protective clothing,and the thicker fabric thickness and air gap thickness can improve the thermal protective properties of the micro-system.
基金National Natural Science Foundation of China (No. 50876019)the Research Fund for the Doctoral Program of Higher Education of China (No. 200802550009)Fundamental Research Funds for the Central Universities,China
文摘The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entrapped.In this paper,to investigate the effect of air gap width on TPP,a new improved apparatus with two height changeable buttons to hold the thermal sensor was developed to get a series of air gap sizes from 0 mm to 40 mm.The TPP of two types of flame-resistant outer fabrics was measured with TPP test apparatus respectively.Analysis of temperature rise with each air gap width was made to determine the effects of different air gaps on protective performance.It was indicated that air gap size had great effect on TPP of fabrics in the bench top test.An air gap width above 8 mm was suggested for the thermal protective clothing design.
文摘This paper is to report a prediction model for thermal protective performance of multilayer fabrics based on Matlab neural network toolbox. Then a back propagation (BP) neural network model is developed to predict thermal protective performance of multilayer fabrics for firefighters. The network consists of twelve input nodes, six hidden nodes, and one output node. The inputs are weight, thickness, density of warp and weft, limited oxygen index (LOI), and heat conductivity of each-layer fabric. Thermal protective performance (TPP) rating of multilayer fabrics is the output. In this paper, the data from the experiments are used as learning information for the neural network to develop a reliable prediction model. Finnally the model performance is verified, and the proposed model can be applied to predict the thermal protective performance of multilayer fabrics for firefighters.
文摘In this paper,the protective performance of woven fab-rics against heat radiation is studied from the view offabric structure.As indices reflecting the protective per-formance against heat radiation,the heat emissivity andthe transmissivity of different fabrics are measured.It ispointed out that structure changes of common textiles af-fect their transmission to heat radiation while have littleinfluence on their absorption or reflection to heat radi-ation except fabrics surfaces are aluminized.Double-layer weave is proved to be an effective fabric weave forreducing the trasmissivity.It helps increase the densityand tightness while keeps the comfort of woven fabrics atthe same time.
基金This work was supported by the Science and technology guidance project plan of China National Textile And Apparel Council(2017006)Natural Science Foundation of Shandong Province of China(ZR2018QEM004)+2 种基金Research and Development Program of Shandong Province of China(Grant Nos.2019GGXI02022,2019JZZY010340,and 2019JZZY010335)Anhui Province Special Science and Technology Project(201903a05020028)Shandong provincial universities youth innovation technology plan innovation team(2020KJA013).
文摘Disposable medical protective clothing for 2019-nCoV mainly consists of stacked layers with nanopore films,polymer coated nonwoven fabrics and melt-blown nonwoven fabrics against anti-microbial and anti-liquid penetration.However,such structures lack moisture permeability and breathability leading to an uncomfortable,stuffy wearing experience.Here,we propose a novel medical protective clothing material with a superabsorbent layer to enhance moisture absorption.Poly(acrylic acid-co-acrylamide)/polyvinyl alcohol superabsorbent fibers(PAAAM/PVA fibers)were prepared via wet spinning.And the superabsorbent composite layer was stacked from PAAAM/PVA fibers,bamboo pulp fibers(BPF)and ethylene-propyl-ene side by side fibers(ESF).The novel disposable medical protective composite fabric was obtained through gluing the superabsorbent layer to the inner surface of strong antistatic polypropylene nonwoven fabric.The resultant composite fabric possesses excellent absorption and retention capacity for sweat,up to 12.3 g/g and 63.8%,and a maximum hygroscopic rate of 1.04 g/h,higher than that of the conventional material(only 0.53 g/h).The moisture permeability of the novel material reached 12,638.5 g/(m^(2) d),which was 307.6%of the conventional material.The novel material can effectively reduce the humidity inside the protective clothing and significantly improve the comfort of medical staff.
