For calibrating the laser plane to implement 3D shape measurement, an algorithm for extracting the laser stripe with sub-pixel accuracy is proposed. The proposed algorithm mainly consists of two stages： two-side edge...For calibrating the laser plane to implement 3D shape measurement, an algorithm for extracting the laser stripe with sub-pixel accuracy is proposed. The proposed algorithm mainly consists of two stages： two-side edge detection and center line extraction. First, the two-side edge of laser stripe is detected using the principal component angle-based progressive probabilistic Hough transform and its width is calculated through the distance between these two edges. Secondly, the center line of laser strip is extracted with 2D Taylor expansion at a sub-pixel level and the laser plane is calibrated with the 3D reconstructed coordinates from the extracted 2D sub-pixel ones. Experimental results demonstrate that the proposed method can not only extract the laser stripe at a high speed, nearly average 78 ms/frame, but also calibrate the coplanar laser stripes at a low error, limited to 0.3 mm. The proposed algorithm can satisfy the system requirement of two-side edge detection and center line extraction, and rapid speed, high precision, as well as strong anti-jamming.展开更多
In order to make the humanoid robot walk freely in complicated circumstance, the reliable capabilities for obtaining plane information from its surroundings are demanded. A system for extracting planes from data taken...In order to make the humanoid robot walk freely in complicated circumstance, the reliable capabilities for obtaining plane information from its surroundings are demanded. A system for extracting planes from data taken by stereo vision was presented, After the depth image was obtained, the pixels of each line were scanned and split into straight line segments. The neighbouring relation of line segments was kept in link structure. The groups of three line segments were selected as seed regions. A queue was maintained for storing seed regions, and then the plane region was expanded around the seed region. The process of region growing continued until the queue of seed regions was empty. After trimming, the edges of the planes became smooth. In the end, extracted planes were obtained. In the experiment, two models were used： pipe and stairs. Two planes in pipe mode/and six planes in stairs model were extracted exactly. The speed and precision of algorithm can satisfy the demands of humanoid robot＇s navigation.展开更多
基金The National Natural Science Foundation of China(No.50805023)the Science and Technology Support Program of Jiangsu Province(No.BE2008081)+1 种基金the Research and Innovation Project for College Graduates of Jiangsu Province(No.CXZZ13_0086)Scientific Research Foundation of Graduate School of Southeast University(No.YBJJ1401)
文摘For calibrating the laser plane to implement 3D shape measurement, an algorithm for extracting the laser stripe with sub-pixel accuracy is proposed. The proposed algorithm mainly consists of two stages： two-side edge detection and center line extraction. First, the two-side edge of laser stripe is detected using the principal component angle-based progressive probabilistic Hough transform and its width is calculated through the distance between these two edges. Secondly, the center line of laser strip is extracted with 2D Taylor expansion at a sub-pixel level and the laser plane is calibrated with the 3D reconstructed coordinates from the extracted 2D sub-pixel ones. Experimental results demonstrate that the proposed method can not only extract the laser stripe at a high speed, nearly average 78 ms/frame, but also calibrate the coplanar laser stripes at a low error, limited to 0.3 mm. The proposed algorithm can satisfy the system requirement of two-side edge detection and center line extraction, and rapid speed, high precision, as well as strong anti-jamming.
基金Project(60776816) supported by the National Natural Science Foundation of China and Civil Aviation Administration of ChinaProject(8251064101000005) supported by the Natural Science Foundation of Guangdong Province,China
文摘In order to make the humanoid robot walk freely in complicated circumstance, the reliable capabilities for obtaining plane information from its surroundings are demanded. A system for extracting planes from data taken by stereo vision was presented, After the depth image was obtained, the pixels of each line were scanned and split into straight line segments. The neighbouring relation of line segments was kept in link structure. The groups of three line segments were selected as seed regions. A queue was maintained for storing seed regions, and then the plane region was expanded around the seed region. The process of region growing continued until the queue of seed regions was empty. After trimming, the edges of the planes became smooth. In the end, extracted planes were obtained. In the experiment, two models were used： pipe and stairs. Two planes in pipe mode/and six planes in stairs model were extracted exactly. The speed and precision of algorithm can satisfy the demands of humanoid robot＇s navigation.
