Optimization Control of Multi-Mode Coupling All-Wheel Drive System for Hybrid Vehicle

The all-wheel drive(AWD)hybrid system is a research focus on high-performance new energy vehicles that can meet the demands of dynamic performance and passing ability.Simultaneous optimization of the power and economy of hybrid vehicles becomes an issue.A unique multi-mode coupling(MMC)AWD hybrid system is presented to realize the distributed and centralized driving of the front and rear axles to achieve vectored distribution and full utilization of the system power between the axles of vehicles.Based on the parameters of the benchmarking model of a hybrid vehicle,the best model-predictive control-based energy management strategy is proposed.First,the drive system model was built after the analysis of the MMC-AWD’s drive modes.Next,three fundamental strategies were established to address power distribution adjustment and battery SOC maintenance when the SOC changed,which was followed by the design of a road driving force observer.Then,the energy consumption rate in the average time domain was processed before designing the minimum fuel consumption controller based on the equivalent fuel consumption coefficient.Finally,the advantage of the MMC-AWD was confirmed by comparison with the dynamic performance and economy of the BYD Song PLUS DMI-AWD.The findings indicate that,in comparison to the comparative hybrid system at road adhesion coefficients of 0.8 and 0.6,the MMC-AWD’s capacity to accelerate increases by 5.26%and 7.92%,respectively.When the road adhesion coefficient is 0.8,0.6,and 0.4,the maximum climbing ability increases by 14.22%,12.88%,and 4.55%,respectively.As a result,the dynamic performance is greatly enhanced,and the fuel savings rate per 100 km of mileage reaches 12.06%,which is also very economical.The proposed control strategies for the new hybrid AWD vehicle can optimize the power and economy simultaneously.

Fake News Detection Based on Text-Modal Dominance and Fusing Multiple Multi-Model Clues

In recent years,how to efficiently and accurately identify multi-model fake news has become more challenging.First,multi-model data provides more evidence but not all are equally important.Secondly,social structure information has proven to be effective in fake news detection and how to combine it while reducing the noise information is critical.Unfortunately,existing approaches fail to handle these problems.This paper proposes a multi-model fake news detection framework based on Tex-modal Dominance and fusing Multiple Multi-model Cues(TD-MMC),which utilizes three valuable multi-model clues:text-model importance,text-image complementary,and text-image inconsistency.TD-MMC is dominated by textural content and assisted by image information while using social network information to enhance text representation.To reduce the irrelevant social structure’s information interference,we use a unidirectional cross-modal attention mechanism to selectively learn the social structure’s features.A cross-modal attention mechanism is adopted to obtain text-image cross-modal features while retaining textual features to reduce the loss of important information.In addition,TD-MMC employs a new multi-model loss to improve the model’s generalization ability.Extensive experiments have been conducted on two public real-world English and Chinese datasets,and the results show that our proposed model outperforms the state-of-the-art methods on classification evaluation metrics.

Correction of microwave pulse reflection by digital filters in superconducting quantum circuits

Reducing the control error is vital for high-fidelity digital and analog quantum operations.In superconducting circuits,one disagreeable error arises from the reflection of microwave signals due to impedance mismatch in the control chain.Here,we demonstrate a reflection cancelation method when considering that there are two reflection nodes on the control line.We propose to generate the pre-distortion pulse by passing the envelopes of the microwave signal through digital filters,which enables real-time reflection correction when integrated into the field-programmable gate array(FPGA).We achieve a reduction of single-qubit gate infidelity from 0.67%to 0.11%after eliminating microwave reflection.Real-time correction of microwave reflection paves the way for precise control and manipulation of the qubit state and would ultimately enhance the performance of algorithms and simulations executed on quantum processors.

AAK Theorem and a Design of Multidimensional BIBO Stable Filters

Rational approximation theory occupies a significant place in signal processing and systems theory. This research paper proposes an optimal design of BIBO stable multidimensional Infinite Impulse Response filters with a realizable (rational) transfer function thanks to the Adamjan, Arov and Krein (AAK) theorem. It is well known that the one dimensional AAK results give the best approximation of a polynomial as a rational function in the Hankel semi norm. We suppose that the Hankel matrix associated to the transfer function has a finite rank.

On Fuzzy Regularly Closed Filters in Michálek Fuzzy Topological Space

C.L. Chang’s introduction of fuzzy topology in 1981 opened up new avenues for parallel theories in topology. However, Chang’s work appears to focus more on the topology of fuzzy sets rather than fuzzy topology itself. In 1975, Michálek presented a functional definition of ordinary topology and later developed fuzzy topology as a distinct extension of this idea, setting it apart from Chang’s approach. While there has been significant research on Chang’s fuzzy topology, Michálek’s version has not received as much attention. This paper introduces the concept of fuzzy regularly closed filters, or FRCM filters, within Michálek’s fuzzy topological space and explores some properties of FRCM ultrafilters.

Performance Evaluation of Two Series Vertical Flow Filters for Wastewater Treatment: A Case Study of the Prototype Installed at Gaston Berger University, Saint-Louis, Senegal

This paper evaluates the efficacy of two sequential vertical flow filters (VFF), FV1 and FV2, implanted with Typha, in a pilot-scale wastewater treatment system. FV1 comprises three cells (FV1a, FV1b, and FV1c), while FV2 consists of two cells (FV2a and FV2b), each designed to reduce various physicochemical and microbiological pollutants from wastewater. Quantitative analyses show significant reductions in electrical conductivity (from 1331 to 1061 μS/cm), biochemical oxygen demand (BOD5 from 655.6 to 2.3 mg/L), chemical oxygen demand (COD from 1240 to 82.2 mg/L), total nitrogen (from 188 to 37.3 mg/L), and phosphates (from 70.9 to 14.6 mg/L). Notably, FV2 outperforms FV1, particularly in decreasing dissolved salts and BOD5 to remarkably low levels. Microbiological assessments reveal a substantial reduction in fecal coliforms, from an initial concentration of 7.5 log CFU/100mL to 3.7 log CFU/100mL, and a complete elimination of helminth eggs, achieving a 100% reduction rate in FV2. The study highlights the impact of design parameters, such as filter material, media depth, and plant species selection, on treatment outcomes. The findings suggest that the judicious choice of these components is critical for optimizing pollutant removal. For instance, different filtration materials show varying efficacies, with silex plus river gravel in FV1c achieving superior pollutant reduction rates. In conclusion, VFFs emerge as a promising solution for wastewater treatment, underscoring the importance of design optimization to enhance system efficiency. Continuous monitoring and adaptation of treatment practices are imperative to ensure water quality, allowing for safe environmental discharge or water reuse. The research advocates for ongoing improvements in wastewater treatment technologies, considering the environmental challenges of the current era. The study concludes with a call for further research to maximize the effectiveness of VFFs in water management.

Data-Based Filters for Non-Gaussian Dynamic Systems With Unknown Output Noise Covariance

This paper proposes linear and nonlinear filters for a non-Gaussian dynamic system with an unknown nominal covariance of the output noise.The challenge of designing a suitable filter in the presence of an unknown covariance matrix is addressed by focusing on the output data set of the system.Considering that data generated from a Gaussian distribution exhibit ellipsoidal scattering,we first propose the weighted sum of norms(SON)clustering method that prioritizes nearby points,reduces distant point influence,and lowers computational cost.Then,by introducing the weighted maximum likelihood,we propose a semi-definite program(SDP)to detect outliers and reduce their impacts on each cluster.Detecting these weights paves the way to obtain an appropriate covariance of the output noise.Next,two filtering approaches are presented:a cluster-based robust linear filter using the maximum a posterior(MAP)estimation and a clusterbased robust nonlinear filter assuming that output noise distribution stems from some Gaussian noise resources according to the ellipsoidal clusters.At last,simulation results demonstrate the effectiveness of our proposed filtering approaches.

New Insights in the Biodegradability and the Ecotoxicological Effects of Solar Products Containing Mineral and Chemical UV-Filters on Marine Zoo- and Phytoplanktons: An in silico and in vitro Study

Background: Cosmetic formulations, and particularly solar products which contain mineral and chemical UV-filters, are often suspected of causing harmful effects on marine fauna and flora. After the publication of our work in 2019 concerning the ecotoxicological effects of such formulations on corals (Seriatopora hystrix), we here provide some new information about the biodegradability and the ecotoxicological effects of these products on marine zoo- and phytoplankton. Therefore, we choose to realize in silico and in vitro studies of the biodegradability of several solar products but also to evaluate the ecotoxicological effects of these products on one phytoplankton, i.e. Phaeodactylum tricornutum, and one zooplankton, i.e. Acartia tonsa, of a great importance for sea species survival (notably as sources of food). Materials and methods: Two different approaches were used to study the biodegradability of the tested products: One in silico method and an in vitro one. 2 solar products were involved in the in silico study which consisted in the determination of the degradation factor (DF) of each ingredient of the tested formulas in order to finally obtain their estimated biodegradability percentage. Already available data concerning each ingredient coupled to a computer model developed with one of our partners were used to achieve this study. The in vitro study involved 8 formulas containing UV-filters and was led by following the OECD 301 F guidelines. Ecotoxicological studies of 7 of the formulas containing UV-filters were for their part realized by following the ISO 10253 guidelines for the experiments led with Phaeodactylum tricornutum, and the ISO 14669 guidelines for the experiments led with Acartia tonsa. In these studies, the effect of each tested product on crustaceans’ mortality and algal growth inhibition was assessed. Results: The in silico study predicted that formulas containing chemical UV-filters display a high biodegradability (superior to the threshold value of 60% given by the OECD 301 F guidelines). In the in vitro part of our work, the 8 tested formulas showed a biodegradability slightly inferior to the one predicted in the in silico experiments. Therefore, in order to evaluate if these calculated biodegradability value could have significant harmful effects on zoo- or phytoplankton, we studied the effect of our products regarding the growth inhibition on Phaeodactylum tricornutum and the mortality on Acartia tonsa. In this last part of the study, all the tested products were classified as “non ecotoxic” following an internal classification based on Part 4 entitled “Environmental Hazards” of Globally Harmonized System of Classification and Labelling of Chemicals (GHS), 9th edition (2021). Conclusions: These results are notably in line with those published by our teams in 2019 on the effects of solar cosmetic products on corals and seem to confirm that formulas containing mineral and chemical UV-filters can be daily used without displaying significant noxious effects on marine fauna and flora. .

A Reconfigurable UWB Bandpass Filters with Embedded Multi-Mode Resonators

The two proposed filters described here satisfy the Federal Communications Commission Ultra-wideband (FCC-UWB) specifications and also control the center frequency and bandwidth of the filters passband. These filters consist of two distinguishing parts, Electromagnetic bandgap (EBG)-embedded multiple- mode resonator (MMR) and interdigital coupled lines to realize high performance in the operation band with a compact size of 14.0 mm × 10.1 mm. The main advantage of the two proposed filters is that three different bands are tuned. The 1st tuned band is from 3.5 GHz to 11.4 GHz for the first filter and from 3.1 GHz to 11.6 GHz for the second proposed filter, respectively. The 2nd tuned band is from 3.5 GHz to 7.5 GHz for the first filter and from 3.1 GHz to 7.8 GHz for the second proposed filter, respectively. While the 3rd tuned band of the first proposed filter is from 3.5 GHz to 5.9 GHz and from 3.1 GHz to 5.8 GHz for the second proposed filter. The bandwidth of the filters can be changed by increasing the length of the outer open circuited stubs which are controlled by using switching matrix equipment (mini circuit, replacement of PIN diodes). To validate the design theory, a reconfigurable UWB bandpass filters (BPFs) with EBG Embedded MMR are designed, fabricated and measured. Good agreement is found between simulated and measured results.

Natural products and extracts from plants as natural UV filters for sunscreens:A review

Although solar exposure is necessary for human health,phototoxicology induced by excessive UVB and UVA radiation,which involves sunburns,skin aging and even tu-morigenesis,has been widely researched.Sunscreen is one of the most important ways to protect skin from UV phototoxic damage.As well as inorganic and organic UV filters,some natural products or plant extracts with aromatic rings in their structures,such as flavonoids or polyphenols,can absorb UV to reduce sunburn,acting as a natu-ral UV filter;they also show antioxidant or/and anti-inflammatory activity.This could explain why,although there are no officially approval natural commercial sun-filters,more and more commercial sunscreen products containing plant extracts are avail-able on the market.Here we summarize articles focusing on natural UV filters from plant published in the last 6 years,selecting the most significant data in order to better understand the photoprotective activity of natural products and extracts from plants,including their major constituents and main biological effects,methods for evaluating UV radiation resistance,anti-UV radiation experimental models and anti-UV radiation mechanisms.

一种基于Filter Faster R-CNN的数字PCR液滴检测技术

目的研究液滴数字聚合酶链式反应(ddPCR)液滴检测技术,去除图像中灰尘、气泡、芯片表面的划痕以及微小凹陷等因素产生的异常点对结果的影响,实现高通量、稳定和准确的ddPCR液滴的自动检测。方法提出Filter Faster R-CNN ddPCR液滴检测模型。使用Faster R-CNN生成液滴预测框,之后使用异常点过滤模块(Filter)去除阳性液滴预测框中的异常点。以诺如病毒片段的质粒为模板进行ddPCR实验,建立一个ddPCR数据集,用于模型的训练(2462例,约占78.56%)和测试(672例,约占21.44%)。对异常点过滤模块的3个过滤支路在验证集上进行消融实验,通过与其他ddPCR液滴检测模型进行比较的对比实验以及进行ddPCR的绝对定量实验。结果在少尘和多尘的环境中,Filter Faster R-CNN阳性液滴准确率为98.23%和88.35%,综合指标F1分数分别达到了99.15%和99.14%,高于其他相比较的模型。独立样本T检验的结果证明,相比未添加过滤模块的网络,添加过滤模块后能够显著提示模型在多尘环境中的阳性准确率。在ddPCR绝对定量实验中,将商业化流式检测设备的结果作为标准浓度,绘制了回归线。结果显示,回归线斜率为1.0005,截距为-0.025,决定系数达到了0.9997,二者结果高度一致。结论本文提出了一种基于Filter Faster R-CNN的ddPCR液滴检测技术,为在多种环境条件下的ddPCR实验提供了鲁棒的液滴检测方法。

Underwater four-quadrant dual-beam circumferential scanning laser fuze using nonlinear adaptive backscatter filter based on pauseable SAF-LMS algorithm

The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.

A Multi-mode Electronic Load Sensing Control Scheme with Power Limitation and Pressure Cut-off for Mobile Machinery

In mobile machinery,hydro-mechanical pumps are increasingly replaced by electronically controlled pumps to improve the automation level,but diversified control functions(e.g.,power limitation and pressure cut-off)are integrated into the electronic controller only from the pump level,leading to the potential instability of the overall system.To solve this problem,a multi-mode electrohydraulic load sensing(MELS)control scheme is proposed especially considering the switching stability from the system level,which includes four working modes of flow control,load sensing,power limitation,and pressure control.Depending on the actual working requirements,the switching rules for the different modes and the switching direction(i.e.,the modes can be switched bilaterally or unilaterally)are defined.The priority of different modes is also defined,from high to low:pressure control,power limitation,load sensing,and flow control.When multiple switching rules are satisfied at the same time,the system switches to the control mode with the highest priority.In addition,the switching stability between flow control and pressure control modes is analyzed,and the controller parameters that guarantee the switching stability are obtained.A comparative study is carried out based on a test rig with a 2-ton hydraulic excavator.The results show that the MELS controller can achieve the control functions of proper flow supplement,power limitation,and pressure cut-off,which has good stability performance when switching between different control modes.This research proposes the MELS control method that realizes the stability of multi-mode switching of the hydraulic system of mobile machinery under different working conditions.

Multi-model deep learning approach for collaborative filtering recommendation system

As a result of a huge volume of implicit feedback such as browsing and clicks,many researchers are involving in designing recommender systems(RSs)based on implicit feedback.Though implicit feedback is too challenging,it is highly applicable to use in building recommendation systems.Conventional collaborative filtering techniques such as matrix decomposition,which consider user preferences as a linear combination of user and item latent features,have limited learning capacities,hence suffer from a cold start and data sparsity problems.To tackle these problems,the research direction towards considering the integration of conventional collaborative filtering with deep neural networks to maps user and item features.Conversely,the scalability and the sparsity of the data affect the performance of the methods and limit the worthiness of the results of the recommendations.Therefore,the authors proposed a multimodel deep learning(MMDL)approach by integrating user and item functions to construct a hybrid RS and significant improvement.The MMDL approach combines deep autoencoder with a one-dimensional convolution neural network model that learns user and item features to predict user preferences.From detail experimentation on two real-world datasets,the proposed work exhibits substantial performance when compared to the existing methods.

Estimating the subsolar magnetopause position from soft X-ray images using a low-pass image filter

The Lunar Environment heliospheric X-ray Imager(LEXI)and Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)missions will image the Earth’s dayside magneto pause and cusps in soft X-rays after their respective launches in the near future,to specify glo bal magnetic reconnection modes for varying solar wind conditions.To suppo rt the success of these scientific missions,it is critical to develop techniques that extract the magnetopause locations from the observed soft X-ray images.In this research,we introduce a new geometric equation that calculates the subsolar magnetopause position(RS)from a satellite position,the look direction of the instrument,and the angle at which the X-ray emission is maximized.Two assumptions are used in this method:(1)The look direction where soft X-ray emissions are maximized lies tangent to the magnetopause,and(2)the magnetopause surface near the subsolar point is almost spherical and thus RSis nea rly equal to the radius of the magneto pause curvature.We create synthetic soft X-ray images by using the Open Geospace General Circulation Model(OpenGGCM)global magnetohydrodynamic model,the galactic background,the instrument point spread function,and Poisson noise.We then apply the fast Fourier transform and Gaussian low-pass filte rs to the synthetic images to re move noise and obtain accurate look angles for the soft X-ray pea ks.From the filte red images,we calculate RS and its accuracy for different LEXI locations,look directions,and solar wind densities by using the OpenGGCM subsolar magnetopause location as ground truth.Our method estimates RS with an accuracy of<0.3 RE when the solar wind density exceeds>10 cm-3.The accuracy improves for greater solar wind densities and during southward interplanetary magnetic fields.The method ca ptures the magnetopause motion during southwa rd interplaneta ry magnetic field turnings.Consequently,the technique will enable quantitative analysis of the magnetopause motion and help reveal the dayside reconnection modes for dynamic solar wind conditions.This technique will suppo rt the LEXI and SMILE missions in achieving their scientific o bjectives.

Magnonic band-pass and band-stop filters with structurally modulated waveguides

Magnonics is a fascinating and emerging field, which mainly studies processing information with spin waves.Magnonic devices with in-plane magnetization have recently been realized. Because of the isotropic propagation, magnonic devices based on perpendicular magnetization are attracting extensive interest. Here, we numerically demonstrate two magnonic filters with out-of-plane magnetization using micromagnetic simulations. The band-pass and the band-stop functions have been realized in two structurally modulated waveguides, respectively. The intensity of spin waves is manipulated when they arrive at the uniformly/non-uniformly magnetized modulators, which results in the variation of transmission coefficients. It is found that the proposed filters can work at multiple frequencies, which can be further adjusted by the external magnetic field. Our designed magnonic devices with Néel-type skyrmion could promote the development of spin wave computing using spin textures.

An improved particle filter indoor fusion positioning approach based on Wi-Fi/PDR/geomagnetic field

The existing indoor fusion positioning methods based on Pedestrian Dead Reckoning(PDR)and geomagnetic technology have the problems of large initial position error,low sensor accuracy,and geomagnetic mismatch.In this study,a novel indoor fusion positioning approach based on the improved particle filter algorithm by geomagnetic iterative matching is proposed,where Wi-Fi,PDR,and geomagnetic signals are integrated to improve indoor positioning performances.One important contribution is that geomagnetic iterative matching is firstly proposed based on the particle filter algorithm.During the positioning process,an iterative window and a constraint window are introduced to limit the particle generation range and the geomagnetic matching range respectively.The position is corrected several times based on geomagnetic iterative matching in the location correction stage when the pedestrian movement is detected,which made up for the shortage of only one time of geomagnetic correction in the existing particle filter algorithm.In addition,this study also proposes a real-time step detection algorithm based on multi-threshold constraints to judge whether pedestrians are moving,which satisfies the real-time requirement of our fusion positioning approach.Through experimental verification,the average positioning accuracy of the proposed approach reaches 1.59 m,which improves 33.2%compared with the existing particle filter fusion positioning algorithms.

Multi-mode Multi-frequency GNSS-IR Combination System for Sea Level Retrieval

With the development of Global Navigation Satellite Systems(GNSS),geodetic GNSS receivers have been utilized to monitor sea levels using GNSS-Interferometry Reflectometry(GNSS-IR)technology.The multi-mode,multi-frequency signals of GPS,GLONASS,Galileo,and Beidou can be used for GNSS-IR sea level retrieval,but combining these retrievals remains problematic.To address this issue,a GNSS-IR sea level retrieval combination system has been developed,which begins by analyzing error sources in GNSS-IR sea level retrieval and establishing and solving the GNSS-IR retrieval equation.This paper focuses on two key points:time window selection and equation stability.The stability of the retrieval combination equations is determined by the condition number of the coefficient matrix within the time window.The impact of ill-conditioned coefficient matrices on the retrieval results is demonstrated using an extreme case of SNR data with only ascending or descending trajectories.After determining the time window and removing ill-conditioned equations,the multi-mode,multi-frequency GNSS-IR retrieval is performed.Results from three International GNSS Service(IGS)stations show that the combination method produces high-precision,high-resolution,and high-reliability sea level retrieval combination sequences.

Sensor-Based Adaptive Estimation in a Hybrid Environment Employing State Estimator Filters

It is widely acknowledged that navigation is a significant source of between sites.The Global Positioning System(GPS)has numerous navi-gational advancements,and hence it is used widely.GPS navigation can be compromised at any level between position,location,and estimation,to the detriment of the user.Consequently,a navigation system requires the precise location and underpinning tracking of an object without signal loss.The objective of a hybrid environment prediction system is to foresee the location of the user and their territory by employing a variety of sensors for position estimation and monitoring navigation.This article presents a state estimation of the relative position for indoor and outdoor activity solved with a state estimation algorithm utilizing Kalman filter.Also,a comparative study of variants of the Kalman filter,where linearizing current mean and covariance with nonlinear state estimation as an approach of Extended Kalman Filter(EFK)is applied to the collected data.The third comparative aspect uses probability distribution for the selected points with a Sigma Point Kalman Filter(SPKF)for evaluating an accelerometer,gyroscope,and GPS data in hybrid environments for various activities for different data collection scenar-ios from users.The findings of the presented model demonstrate the robust performance of all forms of the Kalman filter algorithm for diverse user-performed activities in totally contaminated indoor and outdoor environ-ments.Experimental findings with various patterns and data,conducted by different subjects using multiple modes of navigation,show that the approach can indeed lead to the intelligent development of sensor-based navigation and monitoring.State estimation and prediction is extraordinarily beneficial for mining applications,autonomous vehicle localization/tracking,and location-based services.This research work demonstrates both EKF-based and SPKF-based sensor fusion to provide an appropriate estimation.

Simulation Model for Passive Harmonic Filters Using Matlab/Simulink: A Case Study

Electrical grid power quality is a global issue. The grid must supply electricity at sinusoidal voltages and currents without frequency or amplitude fluctuations. Harmonics from non-linear loads change the stable reference point voltage waveform and cause other problems. Harmonic reduction is essential for grid health. Electrical and electronic equipment users, manufacturers, and suppliers all contribute. This article presents a case analysis of the plastic processing industry, which has historically struggled with a difficulty related to the fifth harmonic. Unwanted harmonics are reduced by using a single-tuned passive filter, a double-tuned passive filter, and a second-order damped filter. The total harmonic distortion is almost identical, but the second-order damped filter provides the best harmonic mitigation, meeting the requirements of the IEE 519-1992 Standard.