Design of Multi-mode Mobile Terminal Chips

Based on the analysis of B3G evolution, the base-band processing chips for mobile terminals are introduced. Key technologies for multi-mode mobile terminal base-band chips are discussed. Terminal technologies are thought to be the key of B3G, and terminal base-band chips are regarded as the core of terminal technologies. Therefore, a unified wireless development platform is required for the R&D of multi-mode mobile terminal base-band processing chips.

Modeling and Comprehensive Review of Signaling Storms in 3GPP-Based Mobile Broadband Networks:Causes,Solutions,and Countermeasures

Control signaling is mandatory for the operation and management of all types of communication networks,including the Third Generation Partnership Project(3GPP)mobile broadband networks.However,they consume important and scarce network resources such as bandwidth and processing power.There have been several reports of these control signaling turning into signaling storms halting network operations and causing the respective Telecom companies big financial losses.This paper draws its motivation from such real network disaster incidents attributed to signaling storms.In this paper,we present a thorough survey of the causes,of the signaling storm problems in 3GPP-based mobile broadband networks and discuss in detail their possible solutions and countermeasures.We provide relevant analytical models to help quantify the effect of the potential causes and benefits of their corresponding solutions.Another important contribution of this paper is the comparison of the possible causes and solutions/countermeasures,concerning their effect on several important network aspects such as architecture,additional signaling,fidelity,etc.,in the form of a table.This paper presents an update and an extension of our earlier conference publication.To our knowledge,no similar survey study exists on the subject.

A Multi-mode Electronic Load Sensing Control Scheme with Power Limitation and Pressure Cut-off for Mobile Machinery

In mobile machinery,hydro-mechanical pumps are increasingly replaced by electronically controlled pumps to improve the automation level,but diversified control functions(e.g.,power limitation and pressure cut-off)are integrated into the electronic controller only from the pump level,leading to the potential instability of the overall system.To solve this problem,a multi-mode electrohydraulic load sensing(MELS)control scheme is proposed especially considering the switching stability from the system level,which includes four working modes of flow control,load sensing,power limitation,and pressure control.Depending on the actual working requirements,the switching rules for the different modes and the switching direction(i.e.,the modes can be switched bilaterally or unilaterally)are defined.The priority of different modes is also defined,from high to low:pressure control,power limitation,load sensing,and flow control.When multiple switching rules are satisfied at the same time,the system switches to the control mode with the highest priority.In addition,the switching stability between flow control and pressure control modes is analyzed,and the controller parameters that guarantee the switching stability are obtained.A comparative study is carried out based on a test rig with a 2-ton hydraulic excavator.The results show that the MELS controller can achieve the control functions of proper flow supplement,power limitation,and pressure cut-off,which has good stability performance when switching between different control modes.This research proposes the MELS control method that realizes the stability of multi-mode switching of the hydraulic system of mobile machinery under different working conditions.

基于MobileNetV3Small-ECA的水稻病害轻量级识别研究

为实现水稻病害的轻量化识别与检测,使用ECA注意力机制改进MobileNetV3Small模型,并使用共享参数迁移学习对水稻病害进行智能化轻量级识别和检测。在PlantVillage数据集上进行预训练,将预训练得到的共享参数迁移到对水稻病害识别模型上微调优化。在开源水稻病害数据集上进行试验测试,试验结果表明,在非迁移学习下,识别准确率达到97.47%,在迁移学习下识别准确率达到99.92%,同时参数量减少26.69%。其次,通过Grad-CAM进行可视化,本文方法与其他注意力机制CBAM和SENET相比,ECA模块生成的结果与图像中病斑的位置和颜色更加一致,表明网络可以更好地聚焦水稻病害的特征,并且通过可视化和各水稻病害分析了误分类原因。本文方法实现了水稻病害识别模型的轻量化,使其能够在移动设备等资源受限的场景中部署,达到快速、高效、便携的目的。同时开发了基于Android的水稻病害识别系统,方便于在边缘端进行水稻病害识别分析。

Air-Ground Collaborative Mobile Edge Computing:Architecture,Challenges,and Opportunities

By pushing computation,cache,and network control to the edge,mobile edge computing(MEC)is expected to play a leading role in fifth generation(5G)and future sixth generation(6G).Nevertheless,facing ubiquitous fast-growing computational demands,it is impossible for a single MEC paradigm to effectively support high-quality intelligent services at end user equipments(UEs).To address this issue,we propose an air-ground collaborative MEC(AGCMEC)architecture in this article.The proposed AGCMEC integrates all potentially available MEC servers within air and ground in the envisioned 6G,by a variety of collaborative ways to provide computation services at their best for UEs.Firstly,we introduce the AGC-MEC architecture and elaborate three typical use cases.Then,we discuss four main challenges in the AGC-MEC as well as their potential solutions.Next,we conduct a case study of collaborative service placement for AGC-MEC to validate the effectiveness of the proposed collaborative service placement strategy.Finally,we highlight several potential research directions of the AGC-MEC.

Leveraging User-Generated Comments and Fused BiLSTM Models to Detect and Predict Issues with Mobile Apps

In the last decade, technical advancements and faster Internet speeds have also led to an increasing number ofmobile devices and users. Thus, all contributors to society, whether young or old members, can use these mobileapps. The use of these apps eases our daily lives, and all customers who need any type of service can accessit easily, comfortably, and efficiently through mobile apps. Particularly, Saudi Arabia greatly depends on digitalservices to assist people and visitors. Such mobile devices are used in organizing daily work schedules and services,particularly during two large occasions, Umrah and Hajj. However, pilgrims encounter mobile app issues such asslowness, conflict, unreliability, or user-unfriendliness. Pilgrims comment on these issues on mobile app platformsthrough reviews of their experiences with these digital services. Scholars have made several attempts to solve suchmobile issues by reporting bugs or non-functional requirements by utilizing user comments.However, solving suchissues is a great challenge, and the issues still exist. Therefore, this study aims to propose a hybrid deep learningmodel to classify and predict mobile app software issues encountered by millions of pilgrims during the Hajj andUmrah periods from the user perspective. Firstly, a dataset was constructed using user-generated comments fromrelevant mobile apps using natural language processing methods, including information extraction, the annotationprocess, and pre-processing steps, considering a multi-class classification problem. Then, several experimentswere conducted using common machine learning classifiers, Artificial Neural Networks (ANN), Long Short-TermMemory (LSTM), and Convolutional Neural Network Long Short-Term Memory (CNN-LSTM) architectures, toexamine the performance of the proposed model. Results show 96% in F1-score and accuracy, and the proposedmodel outperformed the mentioned models.

Adaptive Trajectory Tracking Control for Nonholonomic Wheeled Mobile Robots:A Barrier Function Sliding Mode Approach

The trajectory tracking control performance of nonholonomic wheeled mobile robots(NWMRs)is subject to nonholonomic constraints,system uncertainties,and external disturbances.This paper proposes a barrier function-based adaptive sliding mode control(BFASMC)method to provide high-precision,fast-response performance and robustness for NWMRs.Compared with the conventional adaptive sliding mode control,the proposed control strategy can guarantee that the sliding mode variables converge to a predefined neighborhood of origin with a predefined reaching time independent of the prior knowledge of the uncertainties and disturbances bounds.Another advantage of the proposed algorithm is that the control gains can be adaptively adjusted to follow the disturbances amplitudes thanks to the barrier function.The benefit is that the overestimation of control gain can be eliminated,resulting in chattering reduction.Moreover,a modified barrier function-like control gain is employed to prevent the input saturation problem due to the physical limit of the actuator.The stability analysis and comparative experiments demonstrate that the proposed BFASMC can ensure the prespecified convergence performance of the NWMR system output variables and strong robustness against uncertainties/disturbances.

A finite-time fuzzy adaptive output-feedback fault-tolerant control for underactuated wheeled mobile robots systems

This paper investigates the adaptive fuzzy finite-time output-feedback fault-tolerant control (FTC) problemfor a class of nonlinear underactuated wheeled mobile robots (UWMRs) system with intermittent actuatorfaults. The UWMR system includes unknown nonlinear dynamics and immeasurable states. Fuzzy logic systems(FLSs) are utilized to work out immeasurable functions. Furthermore, with the support of the backsteppingcontrol technique and adaptive fuzzy state observer, a fuzzy adaptive finite-time output-feedback FTC scheme isdeveloped under the intermittent actuator faults. It is testifying the scheme can ensure the controlled nonlinearUWMRs is stable and the estimation errors are convergent. Finally, the comparison results and simulationvalidate the effectiveness of the proposed fuzzy adaptive finite-time FTC approach.

UAV-assisted cooperative offloading energy efficiency system for mobile edge computing

Reliable communication and intensive computing power cannot be provided effectively by temporary hot spots in disaster areas and complex terrain ground infrastructure.Mitigating this has greatly developed the application and integration of UAV and Mobile Edge Computing(MEC)to the Internet of Things(loT).However,problems such as multi-user and huge data flow in large areas,which contradict the reality that a single UAV is constrained by limited computing power,still exist.Due to allowing UAV collaboration to accomplish complex tasks,cooperative task offloading between multiple UAVs must meet the interdependence of tasks and realize parallel processing,which reduces the computing power consumption and endurance pressure of terminals.Considering the computing requirements of the user terminal,delay constraint of a computing task,energy constraint,and safe distance of UAV,we constructed a UAV-Assisted cooperative offloading energy efficiency system for mobile edge computing to minimize user terminal energy consumption.However,the resulting optimization problem is originally nonconvex and thus,difficult to solve optimally.To tackle this problem,we developed an energy efficiency optimization algorithm using Block Coordinate Descent(BCD)that decomposes the problem into three convex subproblems.Furthermore,we jointly optimized the number of local computing tasks,number of computing offloaded tasks,trajectories of UAV,and offloading matching relationship between multi-UAVs and multiuser terminals.Simulation results show that the proposed approach is suitable for different channel conditions and significantly saves the user terminal energy consumption compared with other benchmark schemes.

IRS Assisted UAV Communications against Proactive Eavesdropping in Mobile Edge Computing Networks

In this paper,we consider mobile edge computing(MEC)networks against proactive eavesdropping.To maximize the transmission rate,IRS assisted UAV communications are applied.We take the joint design of the trajectory of UAV,the transmitting beamforming of users,and the phase shift matrix of IRS.The original problem is strong non-convex and difficult to solve.We first propose two basic modes of the proactive eavesdropper,and obtain the closed-form solution for the boundary conditions of the two modes.Then we transform the original problem into an equivalent one and propose an alternating optimization(AO)based method to obtain a local optimal solution.The convergence of the algorithm is illustrated by numerical results.Further,we propose a zero forcing(ZF)based method as sub-optimal solution,and the simulation section shows that the proposed two schemes could obtain better performance compared with traditional schemes.

Time Parameter Based Low-Energy Data Encryption Method for Mobile Applications

Various mobile devices and applications are now used in daily life.These devices require high-speed data processing,low energy consumption,low communication latency,and secure data transmission,especially in 5G and 6G mobile networks.High-security cryptography guarantees that essential data can be transmitted securely;however,it increases energy consumption and reduces data processing speed.Therefore,this study proposes a low-energy data encryption(LEDE)algorithm based on the Advanced Encryption Standard(AES)for improving data transmission security and reducing the energy consumption of encryption in Internet-of-Things(IoT)devices.In the proposed LEDE algorithm,the system time parameter is employed to create a dynamic S-Box to replace the static S-Box of AES.Tests indicated that six-round LEDE encryption achieves the same security level as 10-round conventional AES encryption.This reduction in encryption time results in the LEDE algorithm having a 67.4%lower energy consumption and 43.9%shorter encryption time than conventional AES;thus,the proposed LEDE algorithm can improve the performance and the energy consumption of IoT edge devices.

Observer-based dynamic event-triggered control for distributed parameter systems over mobile sensor-plus-actuator networks

We develop a policy of observer-based dynamic event-triggered state feedback control for distributed parameter systems over a mobile sensor-plus-actuator network.It is assumed that the mobile sensing devices that provide spatially averaged state measurements can be used to improve state estimation in the network.For the purpose of decreasing the update frequency of controller and unnecessary sampled data transmission, an efficient dynamic event-triggered control policy is constructed.In an event-triggered system, when an error signal exceeds a specified time-varying threshold, it indicates the occurrence of a typical event.The global asymptotic stability of the event-triggered closed-loop system and the boundedness of the minimum inter-event time can be guaranteed.Based on the linear quadratic optimal regulator, the actuator selects the optimal displacement only when an event occurs.A simulation example is finally used to verify that the effectiveness of such a control strategy can enhance the system performance.

Optimization Control of Multi-Mode Coupling All-Wheel Drive System for Hybrid Vehicle

The all-wheel drive(AWD)hybrid system is a research focus on high-performance new energy vehicles that can meet the demands of dynamic performance and passing ability.Simultaneous optimization of the power and economy of hybrid vehicles becomes an issue.A unique multi-mode coupling(MMC)AWD hybrid system is presented to realize the distributed and centralized driving of the front and rear axles to achieve vectored distribution and full utilization of the system power between the axles of vehicles.Based on the parameters of the benchmarking model of a hybrid vehicle,the best model-predictive control-based energy management strategy is proposed.First,the drive system model was built after the analysis of the MMC-AWD’s drive modes.Next,three fundamental strategies were established to address power distribution adjustment and battery SOC maintenance when the SOC changed,which was followed by the design of a road driving force observer.Then,the energy consumption rate in the average time domain was processed before designing the minimum fuel consumption controller based on the equivalent fuel consumption coefficient.Finally,the advantage of the MMC-AWD was confirmed by comparison with the dynamic performance and economy of the BYD Song PLUS DMI-AWD.The findings indicate that,in comparison to the comparative hybrid system at road adhesion coefficients of 0.8 and 0.6,the MMC-AWD’s capacity to accelerate increases by 5.26%and 7.92%,respectively.When the road adhesion coefficient is 0.8,0.6,and 0.4,the maximum climbing ability increases by 14.22%,12.88%,and 4.55%,respectively.As a result,the dynamic performance is greatly enhanced,and the fuel savings rate per 100 km of mileage reaches 12.06%,which is also very economical.The proposed control strategies for the new hybrid AWD vehicle can optimize the power and economy simultaneously.

Detection and Prevention of Malware in Android Mobile Devices: A Literature Review

Despite only being around for a few years, mobile devices have steadily risen to become the most extensively used computer devices. Given the number of people who rely on smartphones, which can install third-party apps, it has become an increasingly important issue for end-users and service providers to ensure that both the devices and the underlying network are secure. People will become more reliant on applications such as SMS, MMS, Internet Access, Online Transactions, and so on due to such features and capabilities. Thousands of devices ranging from low-cost phones to high-end luxury phones are powered by the Android operating system, which has dominated the smartphone marketplace. It is about making it possible for people from all socioeconomic backgrounds to get and use mobile devices in their daily activities. In response to this growing popularity, the number of new applications introduced to the Android market has skyrocketed. The recent appearance of a wide range of mobile malware has caught the attention of security professionals and scholars alike. In light of the ongoing expansion of the mobile phone industry, the likelihood of it being used in criminal activities will only continue to rise in the future. This article reviews the literature on malware detection and prevention in Android mobile devices, analyzes the existing literature on major studies and tasks, and covers articles, journals, and digital resources such as Internet security publications, scientific studies, and conferences.

A Problem Not to Be Ignored: The Influencing Factors of Mobile Phone Addiction and Its Influence on Sleep Quality

Background and Objective: With the popularity and widespread use of mobile phones, the effects of mobile phone dependence and addiction on individuals’ physical and mental health have attracted more and more attention. The present study aims to analyze the current state of mobile phone addiction and its impact on sleep quality within the population, while also exploring the influence of related factors on sleep quality. Ultimately, this research will provide a scientific foundation for targeted intervention measures and strategies. Methods: A total of 253 permanent residents in Nanjing were randomly selected as study subjects. The Mobile Phone Addiction Index (MPAI) and Pittsburgh Sleep Quality Index (PSQI) were used to evaluate the degree of smartphone addiction and sleep quality of the study subjects. Body mass index (BMI) was measured according to standardized procedures. Independent sample t-test, Chi-square test, rank sum test and multiple linear regression were used to analyze the correlation between mobile phone addiction and sleep quality, and P Results: 117 people (46.2%) were addicted to mobile phones. Chi-square test showed that the rate of mobile phone addiction in drinking group was significantly higher than that in non-drinking group (P P P P P P P P P P Conclusion: Mobile phone addiction may lead to shorter sleep duration and reduce sleep efficiency. The withdrawal of mobile phone addiction may have a negative impact on sleep quality. According to the characteristics of the population, appropriate comprehensive intervention measures should be taken to build an effective evaluation system, so as to reduce the impact of mobile phone addiction and withdrawal problems on sleep and improve sleep quality.

Fake News Detection Based on Text-Modal Dominance and Fusing Multiple Multi-Model Clues

In recent years,how to efficiently and accurately identify multi-model fake news has become more challenging.First,multi-model data provides more evidence but not all are equally important.Secondly,social structure information has proven to be effective in fake news detection and how to combine it while reducing the noise information is critical.Unfortunately,existing approaches fail to handle these problems.This paper proposes a multi-model fake news detection framework based on Tex-modal Dominance and fusing Multiple Multi-model Cues(TD-MMC),which utilizes three valuable multi-model clues:text-model importance,text-image complementary,and text-image inconsistency.TD-MMC is dominated by textural content and assisted by image information while using social network information to enhance text representation.To reduce the irrelevant social structure’s information interference,we use a unidirectional cross-modal attention mechanism to selectively learn the social structure’s features.A cross-modal attention mechanism is adopted to obtain text-image cross-modal features while retaining textual features to reduce the loss of important information.In addition,TD-MMC employs a new multi-model loss to improve the model’s generalization ability.Extensive experiments have been conducted on two public real-world English and Chinese datasets,and the results show that our proposed model outperforms the state-of-the-art methods on classification evaluation metrics.

SAC-Based Computation Offloading for Reconfigurable Intelligent Surface-Aided Mobile Edge Networks

In this paper,we concentrate on a reconfigurable intelligent surface(RIS)-aided mobile edge computing(MEC)system to improve the offload efficiency with moving user equipments(UEs).We aim to minimize the energy consumption of all UEs by jointly optimizing the discrete phase shift of RIS,UEs’transmitting power,computing resources allocation,and the UEs’task offloading strategies for local computing and offloading.The formulated problem is a sequential decision making across multiple coherent time slots.Furthermore,the mobility of UEs brings uncertainties into the decision-making process.To cope with this challenging problem,the deep reinforcement learning-based Soft Actor-Critic(SAC)algorithm is first proposed to effectively optimize the discrete phase of RIS and the UEs’task offloading strategies.Then,the transmitting power and computing resource allocation can be determined based on the action.Numerical results demonstrate that the proposed algorithm can be trained more stably and perform approximately 14%lower than the deep deterministic policy gradient benchmark in terms of energy consumption.

Time and Space Efficient Multi-Model Convolution Vision Transformer for Tomato Disease Detection from Leaf Images with Varied Backgrounds

A consumption of 46.9 million tons of processed tomatoes was reported in 2022 which is merely 20%of the total consumption.An increase of 3.3%in consumption is predicted from 2024 to 2032.Tomatoes are also rich in iron,potassium,antioxidant lycopene,vitamins A,C and K which are important for preventing cancer,and maintaining blood pressure and glucose levels.Thus,tomatoes are globally important due to their widespread usage and nutritional value.To face the high demand for tomatoes,it is mandatory to investigate the causes of crop loss and minimize them.Diseases are one of the major causes that adversely affect crop yield and degrade the quality of the tomato fruit.This leads to financial losses and affects the livelihood of farmers.Therefore,automatic disease detection at any stage of the tomato plant is a critical issue.Deep learning models introduced in the literature show promising results,but the models are difficult to implement on handheld devices such as mobile phones due to high computational costs and a large number of parameters.Also,most of the models proposed so far work efficiently for images with plain backgrounds where a clear demarcation exists between the background and leaf region.Moreover,the existing techniques lack in recognizing multiple diseases on the same leaf.To address these concerns,we introduce a customized deep learning-based convolution vision transformer model.Themodel achieves an accuracy of 93.51%for classifying tomato leaf images with plain as well as complex backgrounds into 13 categories.It requires a space storage of merely 5.8 MB which is 98.93%,98.33%,and 92.64%less than stateof-the-art visual geometry group,vision transformers,and convolution vision transformermodels,respectively.Its training time of 44 min is 51.12%,74.12%,and 57.7%lower than the above-mentioned models.Thus,it can be deployed on(Internet of Things)IoT-enabled devices,drones,or mobile devices to assist farmers in the real-time monitoring of tomato crops.The periodicmonitoring promotes timely action to prevent the spread of diseases and reduce crop loss.

Computing Resource Allocation for Blockchain-Based Mobile Edge Computing

Users and edge servers are not fullymutually trusted inmobile edge computing(MEC),and hence blockchain can be introduced to provide trustableMEC.In blockchain-basedMEC,each edge server functions as a node in bothMEC and blockchain,processing users’tasks and then uploading the task related information to the blockchain.That is,each edge server runs both users’offloaded tasks and blockchain tasks simultaneously.Note that there is a trade-off between the resource allocation for MEC and blockchain tasks.Therefore,the allocation of the resources of edge servers to the blockchain and theMEC is crucial for the processing delay of blockchain-based MEC.Most of the existing research tackles the problem of resource allocation in either blockchain or MEC,which leads to unfavorable performance of the blockchain-based MEC system.In this paper,we study how to allocate the computing resources of edge servers to the MEC and blockchain tasks with the aimtominimize the total systemprocessing delay.For the problem,we propose a computing resource Allocation algorithmfor Blockchain-based MEC(ABM)which utilizes the Slater’s condition,Karush-Kuhn-Tucker(KKT)conditions,partial derivatives of the Lagrangian function and subgradient projection method to obtain the solution.Simulation results show that ABM converges and effectively reduces the processing delay of blockchain-based MEC.

The Contribution of AI-Powered Mobile Apps to Smart City Ecosystems

In the groundbreaking study “The Contribution of AI-powered Mobile Apps to Smart City Ecosystems,” authored by Zaki Ali Bayashot, the transformative role of artificial intelligence (AI) in urban development is meticulously examined. This comprehensive research delineates the multifaceted ways in which AI-powered mobile applications can significantly enhance the efficiency, sustainability, and livability of urban environments, marking a pivotal step towards the realization of smart cities globally. Bayashot meticulously outlines the critical areas where AI-powered apps offer unprecedented advantages, including urban mobility, public safety, energy management, and environmental monitoring. By leveraging AI’s capabilities, these applications not only streamline city operations but also foster a more sustainable interaction between city dwellers and their environment. The paper emphasizes the importance of data-driven decision-making in urban planning, showcasing how AI analytics can predict and mitigate traffic congestion, optimize energy consumption, and enhance emergency response strategies. The author also explores the social implications of AI in urban settings, highlighting the potential for these technologies to bridge the gap between government entities and citizens. Through engaging case studies, Bayashot demonstrates how participatory governance models, enabled by AI apps, can promote transparency, accountability, and citizen engagement in urban management. A significant contribution of this research is its focus on the challenges and opportunities presented by the integration of AI into smart city ecosystems. Bayashot discusses the technical, ethical, and privacy concerns associated with AI applications, advocating for a balanced approach that ensures technological advancements do not come at the expense of civil liberties. The study calls for robust regulatory frameworks to govern the use of AI in public spaces, emphasizing the need for ethical AI practices that respect privacy and promote inclusivity. Furthermore, Bayashot’s research underscores the necessity of cross-disciplinary collaboration in the development and implementation of AI technologies in urban contexts. By bringing together experts from information technology, urban planning, environmental science, and social sciences, the author argues for a holistic approach to smart city development. This interdisciplinary strategy ensures that AI applications are not only technologically sound but also socially and environmentally responsible. The paper concludes with a visionary outlook on the future of smart cities, posited on the seamless integration of AI technologies. Bayashot envisions a world where AI-powered mobile apps not only facilitate smoother urban operations but also empower citizens to actively participate in the shaping of their urban environments. This research serves as a critical call to action for policymakers, technologists, and urban planners to embrace AI as a tool for creating more sustainable, efficient, and inclusive cities. By presenting a detailed analysis of the current state of AI in urban development, coupled with practical insights and forward-looking recommendations, “The Contribution of AI-powered Mobile Apps to Smart City Ecosystems” stands as a seminal work that is poised to inspire and guide the evolution of urban landscapes worldwide. Its comprehensive exploration of the subject matter, combined with its impactful conclusions, make it a must-read for anyone involved in the field of smart city development, AI technology, or urban policy-making.