Numerical Integration Method in Analysis of Wire Antennas

The numerical evaluation of an integral is a frequently encountered problem in antenna analysis. A special Gauss Christoffel quadrature formula for nonclassical weight function is constructed for solving the pseudo singular integration problem arising from the analysis of thin wire antennas. High integration accuracy is obtained at comparable low computation cost by the quadrature formula constructed. This integration method can be also used in other electromagnetic integral equation problems.

Adaptive Fractional-Order PID Control for VSC-HVDC Systems via Cooperative Beetle Antennae Search with Offshore Wind Integration

Since the voltage source converter based high voltage direct current(VSC-HVDC)systems owns the features of nonlinearity,strong coupling and multivariable,the classical proportional integral(PI)control is hard to obtain content control effect.Hence,a new perturbation observer based fractional-order PID(PoFoPID)control strategy is designed in this paper for(VSC-HVDC)systems with offshore wind integration,which can efficiently boost the robustness and control performance of entire system.Particularly,it employs a fractional-order PID(FoPID)fra-mework for the sake of compensating the perturbation estimate,which dramatically boost the dynamical responds of the closed-loop system,and the cooperative beetle antennae search(CBAS)algorithm is adopted to quickly and effi-ciently search its best control parameters.Besides,CBAS algorithm is able to efficiently escape a local optimum because of a suitable trade-off between global exploration and local exploitation can be realized.At last,comprehensive case studies are carried out,namely,active and reactive power tracking,5-cycle line-line-line-ground(LLLG)fault,and offshore wind farm integration.Simulation results validate superiorities and effectiveness of PoFoPID control in com-parison of that of PID control and feedback linearization sliding-mode control(FLSMC),respectively.

Millimeter wave dielectric loaded exponentially tapered slot antenna array using substrate integrated waveguide for gigabit wireless communications

A new and upcoming application is the use of 60 GHz antennas for high date rate point-to-point connections to serve Gigabit(Gi-Fi)w ireless communications.The design of M illimeter w ave(M m W)antennas has to cope w ith the unadorned influences of manufacturing tolerances and losses at 60 GHz.In this paper,the concept of Substrate Integrated Waveguide(SIW)and Exponentially Tapered Slot(ETS)antenna w ere used together to design a high gain,efficient planar dielectric loaded antenna for M m W Gi-Fi w ireless communications at 60 GHz.The SIW is used to feed the antenna and a dielectric is utilized in front of the antenna to increase the gain.The dielectric loaded ETS antenna and compact SIW feed w ere fabricated on a single substrate,resulting in low cost and easy fabrication.The antenna w ith elliptical shaped dielectric loaded w as fabricated using printed circuit board process.The measured gain of the single element antenna is 10.2 dB,w hile the radiation efficiency of 96.84%is obtained at 60 GHz.The Y-junction SIW pow er divider is used to form a 1×4 array structure.M easured gain of the 1×4 array antenna is 13.3 dB,w hile the measured radiation pattern and gain are almost constant w ithin the w ide bandw idth of the antenna.

A multi-frequency circularly polarized metasurface antenna array based on quarter-mode substrate integrated waveguide for sub-6 applications

A miniaturized multi-frequency circularly polarized array is designed in this paper.The antenna array is composed of three independent sub-arrays employing modified quarter-mode substrate ntegrated aveguide(QMSIW)to achieve three circularly polarized frequency bands.By introducing strip-slot,the impedance bandwidth of the antenna array is broadened while the dimension is decreased by 75%to realize miniaturization.Meanwhile,metasurface causes the impedance bandwidth of the sub-array to be further enhanced.Moreover,the metal vias are employed in the antenna array design to further achieve miniaturization.The antenna array is manufactured and measured to verify the design.Both the measured and simulated results display that the array achieves the impedance bandwidths of 10%,11.7%,and 14.8%and axial ratio bandwidths of 8.8%,8.0%,and 8.5%at 2.5,3.5,and 4.8 GHz,respectively.The gain is stable in the operating band within an uncertainty of 0.7 d Bi.The whole dimension is 0.92λ×0.63λ×0.04λ,whereλ_(0) is the wavelength at the lowest resonant frequency.Furthermore,the simple structure and miniaturization provides great convenience in sub-6 applications.

Substrate Integrated Waveguide Based Monopulse Slot Antenna Arrays for 60 GHz Applications

Monopulse slot antenna arrays based on substrate integrated waveguide （SIW） are proposed for the application of 60 GHz mono- pulse tracking systems in this paper. The sum-difference monopulse comparator can provide a high amplitude and phase balance over wide frequency band and no phase delay technique is required for the difference channel. Resonant slot antennas are adopted as the radiating elements since they can be integrated with the sum-difference monopulse comparator in a single layer with a compact size. Two monopulse arrays with 2× 4 and 4×4 slot elements are designed, fabricated, and measured. Measured results show that the proposed antenna arrays have wide bandwidth covering the unlicensed 60-GHz band. The peak sum beam gain is 13.85 dBi for the 2 ×4 element array and 16.24 dBi for the 4×4 element array. The peak difference beam gain is 11.20 dBi for the 2×4 element array and 12.11 dBi for the 4×4 element array and the maximum null depth can reach -40 dB.

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.

Bandwidth-enhanced dual-polarized antenna with improved broadband integrated balun and distributed parasitic element

A bandwidth-enhanced dual-polarized antenna is proposed for 2/3/4/5G applications,which is composed of distributed parasitic elements(DPEs),a main radiator,two improved broadband integrated baluns and a reflector.First,a novel tooth-shape shorted slot line in the improved broadband integrated balun is analyzed to adjust the input impedance of the antenna.Then,DPEs with 2×2 circular plates loading over the main radiator are proposed to improve broadband impedance matching and radiation pattern.By utilizing impedance compensation of the tooth-shaped shorted slot line and the electromagnetic induction of the DPEs,the antenna achieves an enhanced impedance bandwidth and a stable radiation pattern.To verify these ideas,the bandwidth-enhanced dual-polarized antenna was fabricated and measured.The experimental results indicate that the proposed antenna achieves an operating bandwidth of 72.2%(1.69 to 3.60 GHz)with a return loss(RL)less than-15 dB and a port-to-port isolation(ISO)larger than 30 dB.The antenna obtains a half-power beamwidth(HPBW)within(66±5)°and a gain within(9.0±0.6)dBi in the 2/3/4G bands,and an HPBW within(61.5±2.5)°and a gain within(9.8±0.3)dBi in the 5G band.Across the whole band,the cross-polarization discrimination(XPD)and the front-to-back ratio are both larger than 20 dB.

Construction Method of Rail Transit Oriented Metropolitan Area under the Integration of Four Networks

In the process of metropolitan area integration,the current rail transit development is not enough to support the rapid expansion of the economy and population of the metropolitan area.It is necessary to attach importance to the important role of rail transit as a support system,promote the integrated development of the metropolitan area,and create a metropolitan area on the track.Through the problems in rail transit development,the development concept of “four networks integration” of rail transit is put forward.From multiple aspects of planning,construction and operation,reasonable promotion strategies are proposed,which could provide feasible suggestions for promoting the construction of metropolitan area on the track.

Metamaterial beam scanning leaky-wave antenna based on quarter mode substrate integrated waveguide structure

In this paper, we first propose a metamaterial structure by etching the same two interdigital fingers on the upper ground of quarter mode substrate integrated waveguide（QMSIW）. The simulated results show that the proposed QMSIWbased metamaterial has a continuous phase constant changing from negative to positive values within its passband. A periodic leaky-wave antenna（LWA）, which consists of 11 QMSIW-based metamaterial unit cells, is designed, fabricated,and measured. The measured results show that the fabricated antenna achieves a continuous beam scanning property from backward-43° to forward ＋32° over an operating frequencyrange of 8.9 GHz–11.8 GHz with return loss better than 10 d B.The measured antenna gain keeps consistent with the variation of less than 2 d B over the operating frequency range with a maximum gain of 12 d B. Besides, the measured and simulated results are in good agreement with each other, indicating the significance and effectiveness of this method.

Design of compact integrated diamond nitrogen-vacancy center quantum probe

An integrated quantum probe for magnetic field imaging is proposed,where the nitrogen–vacancy(NV)center fixed at the fiber tip is located on the periphery of flexible ring resonator.Using flexible polyimide(PI)as the substrate medium,we design a circular microstrip antenna,which can achieve a bandwidth of 140 MHz at Zeeman splitting frequency of 2.87 GHz,specifically suitable for NV center experiments.Subsequently,this antenna is seamlessly fixed at a three-dimensional-printed cylindrical support,allowing the optical fiber tip to extend out of a dedicated aperture.To mitigate errors originating from processing,precise tuning within a narrow range can be achieved by adjusting the conformal amplitude.Finally,we image the microwave magnetic field around the integrated probe with high resolution,and determine the suitable area for placing the fiber tip(SAP).

Analysis and Design of Broadband Stacked Microstrip Patch Antennas

A broadband microstrip patch antenna was analyzed and designed.Full wave analysis method(FWAM) was employed to show that a stacked microstrip dual patch antenna(SMDPA) might have a much wider bandwidth than that of the ordinanry uni patch one.By means of discrete complex image theory(DCIT),the Sommerfeld integrals (SI) involved were accurately calculated at a speed several hundred times faster than numerical integration method(NIM).The feeding structure of the SMDPA was then improved and the bandwidth was extended to about 22% or more for voltage standing wave ratio (VSWR)s≤2 Finally,a matching network was constructed to obtain a bandwidth of about 25% for s≤1.5.

Frequency-Diversified Space-Efficient Radiating Surface Using Convolved Electric and Magnetic Currents for Highly Dense Multiband Antenna-Frontend Integration

We propose and investigate a methodology based on convolved electric and magnetic currents for the generation of multi-band responses over a space-shared radiating surface.First,a single wideband antenna operation principle based on inter-leaved dipole and slot modes is studied and analyzed using full-wave simulations followed by a qualitative time domain analysis.Subsequently,a 2×2 dual-band radiating unit is conceived and developed by closely arranging single wideband antennas.In this case,multimode resonances are generated in a lower frequency band by a proper convolving and coupling of the magnetic and electric currents realized in the gaps between the antennas and on the surface of the antennas,respectively.This methodology can be deployed repeatedly to build up a self-scalable topology by reusing the electromagnetically(EM)connected radiating surfaces and gaps be-tween the radiating units.Due to the efficient reuse of the electromagnetic region for the development of multiband radiation,a high aperture-reuse efficiency is achieved.Finally,as a proof of concept,a 2×4 dual-band array operating in Ku-and Ka-bands is devel-oped and fabricated by a linear arrangement of the two developed radiating units.Our measurement results show that the proposed antenna array provides impedance and gain bandwidths of 30%and 25.4%in the Ku-band and 10.65%and 8.52%in the Ka-band,respectively.

A Review on Applications of Integrated Terahertz Systems

A review on Terahertz end-to-end systems with an emphasis on integrated approaches is presented.Four major catalogs of THz integrated systems,including THz communication systems,THz imaging systems,THz radars,and THz spectroscopy systems,are reviewed in this article.The performance of integrated systems is compared with non-integrated solutions,followed by a discussion on the trend in future research avenues and applications.

Design and application of single-antenna GPS/accelerometers attitude determination system

In view of the problem that the current single-antenna GPS attitude determination system can only determine the body attitude when the sideslip angle is zero and the multiantenna GPS/SINS integrated navigation system is of large volume, high cost, and complex structure, this approach is presented to determine the attitude based on vector space with single-antenna GPS and accelerometers in the micro inertial measurement unit （MIMU）. It can provide real-time and accurate attitude information. Subsequently, the single-antenna GPS/SINS integrated navigation system is designed based on the combination of position, velocity, and attitude. Finally the semi- physical simulations of single-antenna GPS attitude determination system and single-antenna GPS/SINS integrated navigation system are carried out. The simulation results, based on measured data, show that the single-antenna GPS/SINS system can provide more accurate navigation information compared to the GPS/SINS system, based on the combination of position and velocity. Furthermore, the single-antenna GPS/SINS system is characteristic of lower cost and simpler structure. It provides the basis for the application of a single-antenna GPS/SINS integrated navigation system in a micro aerial vehicle （MAV）.

THE MOMENT METHOD ON RESONANT QUADRIFILAR HELICAL ANTENNAS

An efficient measure is taken to rearrange Nakano’s kernels of integral equationsfor an antenna system composed of arbitrarily bent wires.By means of the moment method,great efforts are made to analyze and compute the circularly polarized patterns,directivity,axialratio,front-to-back ratio and beam-shaping characteristics of resonant quadrifilar helical antennasas well as the feeding technique and the effect of an electrically large conducting body on theperformance of the antennas.

VERTICAL ANTENNA EMBEDDED IN EARTH WITH CONDUCTIVE COATING

A vertical antenna embedded in earth with conductive coating has been investi-gated by employing the method of integral equation.This topic is available to EM-MWD(Elec-tromagnetic Measurement-While-Drilling)system,which is a new real time system for drillingmeasurement.Under the condition that the wave number of the earth is much larger than that ofthe air,a current integral equation has been derived.After the current distribution having beendetermined,the electric field strength on the earth surface has been predicted and its dependenceson the operating frequency and the depth of the well have been discussed as well.

Electromagnetic Field Due to a Loop Antenna Buried in a Medium with Complex Boundaries

The radiation of a loop antenna embedded in a dissipative medium with complex boundaries isanalyzed by a perturbation method and an efficient fast multiple-integration technique. But theperturbation method can not be used directly because there is a finite-length metal cylinder in the vicinityof the loop antenna. The prolate ellipsoid equivalence of the metal cylinder is made, then the cylinder maybe removed and the perturbation method is valid. Numerical results indicate that the approach is accurateat low frequencies and stable.

Time-Domain Analysis of a Wire Antenna Near Arbitrarily Shaped Conductor Bodies

A time domain electric al field integral equation (TDEFIE) is formulated for the problem of a thin wire antenna in the presence of conductor bodies, and this equation is solved by the method of time marching algorithm. The analysis is valid for any arbitrarily shaped, oriented and positioned wire antennas relative to arbitrarily shaped conductor bodies. Current at the excited point, input admittance and radiation pattern are given and agree with the results computed by the method in frequency domain.

A Simplified Full-Wave Analysis for Microstrip Patch Antennas

The spectral domain integral equation(SDIE) provides an accurate and efficient method for computing the resonant frequency, radiation patterns, etc . Using continuous Fourier transform, the formulation utilizes the singular integral equations via the Glerkin's method to derive the deterministic equation with fewer mathematical manipulations. In contrast, discrete Fourier transform(DFT) requires intricate mathematical labor. The present scheme requires a small size, i.e ., (2×2) matrix, and it is possible to extract higher order modal solutions conveniently. Moreover, computation is reduced with the same convergence properties. Based on the present scheme, some results for resonant frequency and radiation patterns compared with available data and computed current distribution on the patch are presented.

Loaded antenna in half lossy space base on HDGA

Antenna loads can modify the current distribution on the wires, thus improving antenna characteristics in the process. However, it is difficult to calculate appropriate loads of antenna near the ground because in half lossy space there are inherent situational complexities. This paper optimizes loads of antenna near the ground base using a half-determlned genetic algorithm. The numerical results show the HDGA has a quicker convergent speed and a better convergent value than the SGA.