In conjunction with the working characteristics of the high-clearance wheeled sprayer and the benefits of the closed hydraulic system,a series of reasonable working parameters should be established,and a hydraulic sys...In conjunction with the working characteristics of the high-clearance wheeled sprayer and the benefits of the closed hydraulic system,a series of reasonable working parameters should be established,and a hydraulic system that fulfills the requisite specifications should be designed.The AMESim software model is employed to construct a closed hydraulic transmission system,and the simulation analysis is then performed according to the data of hydraulic components.According to analysis results,the prototype can be optimized and upgraded,and a verification test is further carried out.The test results demonstrate that the designed closed hydraulic transmission system meets the actual working requirements of the high-clearance wheeled sprayer and provides a stable experimental platform for intelligent control of agricultural machinery.展开更多
Based on the prototypes of a 130 t/h boiler, constant proportional cold-state test bench is established, flow characteristics of multi-nozzle in natural gas reburning burner and its influence on the covering effect fo...Based on the prototypes of a 130 t/h boiler, constant proportional cold-state test bench is established, flow characteristics of multi-nozzle in natural gas reburning burner and its influence on the covering effect for the upflow in the furnace are researched. Numerical simulations of this process are also made with standard ?turbulence model. The results show that air flow fullness in furnace is better in the case of the reburning zone with 8 nozzles compared to 4 nozzles and also coverage effect of the reburning flow for the updraft gas in the furnace is better. In the condition each nozzle airflow velocity is constant, the effect of reburning flow on coverage of up-secondary air is best when the incident angle for four corners is 14.17?, while Center of the furnace wall is 84.57. And while the best incident angle is invariable, the effect of reburning flow on coverage of up-secondary air is best when the speed of reburning gas in the corners of furnace is 51 m/s, the same to the center of the furnace wall’s.展开更多
The study was aimed at determining the impacts of operating Manually Operated Hand Lever Knapsack Sprayers (MOHLKS) on physiological responses of the operators as dependent on anthropometric variations and sex. Twenty...The study was aimed at determining the impacts of operating Manually Operated Hand Lever Knapsack Sprayers (MOHLKS) on physiological responses of the operators as dependent on anthropometric variations and sex. Twenty eight subjects, (4 female, 24 male) Mean ± SD: Age 22.5 ± 1.92, 24.29 ± 2.2 years;Body Mass Index 24.6 ± 4.8, 21.7 ± 2.4 kg/m<sup>2</sup> were employed in the study. Selected anthropometric parameters of weight and height were used to determine body mass index (BMI), with these are arm-reach forward, elbow to fingertip, hand length and hand width were measured to establish human variations in diversity. Subjects undertook the operation at 5 replicates each, before and after which information about operators’ body pain locations and body physiological changes of heart rates were obtained. Measured parameters were used in the determination of expended energy (EE), physiological cost (PC), oxygen intake (VO<sub>2</sub>) and aerobic power (VO<sub>2</sub>max). Alongside with these were operational parameters of stroke, pace and time taken to get the operation done and environmental factors of temperature and relative humidity. The results revealed on the average that the BMI (24.61 ± 4.78 kg/m<sup>2</sup>) in female operators was higher, this corresponded to PC and VO<sub>2</sub>, while the VO<sub>2</sub>max (34.83 ± 3.30 ml/min/kg) in males is higher. More EE was obtained in female subjects (3.53 ± 3.76 kCal/min) as compared to male subjects (3.42 ± 7.48 kCal/min). The main effects plot of operational factors on EE displayed the stroke made by the subjects during spraying operation as parameter with largest effect on EE. Regression equation for EE and PCI is given as PCI = 1.97 + 25.2 EE, while the P-value at α = 0.05 is 0.000 and R<sup>2</sup> = 98.8%. Post operational body pain showed that 19 out of 28 subjects incurred at least one type of body pain, with shoulder pain as most frequent. The results of the study suggest that early incidence of fatigue may occur in female operators as compared to the males, and in addition, cumulative trauma at shoulder, back, and upper and lower arm may result over time. Hence, it is recommended that the tank volume should be reduced and the straps for the shoulders should be supported with additional cushion.展开更多
Comparisons were performed between self-propelled boom sprayer and traditional mechanis, such as knapsack sprayer and sprayer-duster, stretcher-type powered sprayer, as well as single rotor unmanned sprayer and multi-...Comparisons were performed between self-propelled boom sprayer and traditional mechanis, such as knapsack sprayer and sprayer-duster, stretcher-type powered sprayer, as well as single rotor unmanned sprayer and multi-rotor un- manned sprayer. The effects on rice injury, lodging, and rehabilitation were conclud- ed and drug uniform distribution, sedimentation and prevention effects were ana- lyzed. The results showed that the self-propelled boom sprayer is characterized by high degree of automation, convenient operation, high adaptability, and high work efficiency. What＇s more, the sprayed fog quality is better, and fog distribution is more uniform. During the work process, fog loss would be diminished substantially, improving work efficiency and cutting down drug and water. It is notable that the underpart of the sprayer can be widely applied to plant protection in large-scale ar- eas in Jiangsu Province, significantly advancing whole-process mechanization of rice production.展开更多
This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysi...This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium nitrate.The performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were investigated.Results indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design parameters.The decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary nozzles.The optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.展开更多
基金Supported by 2023 Xinjiang Uygur Autonomous Region R&D and Promotion and Application of Key Technologies of CNC Sprayer for Seed Corn(2023NC010).
文摘In conjunction with the working characteristics of the high-clearance wheeled sprayer and the benefits of the closed hydraulic system,a series of reasonable working parameters should be established,and a hydraulic system that fulfills the requisite specifications should be designed.The AMESim software model is employed to construct a closed hydraulic transmission system,and the simulation analysis is then performed according to the data of hydraulic components.According to analysis results,the prototype can be optimized and upgraded,and a verification test is further carried out.The test results demonstrate that the designed closed hydraulic transmission system meets the actual working requirements of the high-clearance wheeled sprayer and provides a stable experimental platform for intelligent control of agricultural machinery.
文摘Based on the prototypes of a 130 t/h boiler, constant proportional cold-state test bench is established, flow characteristics of multi-nozzle in natural gas reburning burner and its influence on the covering effect for the upflow in the furnace are researched. Numerical simulations of this process are also made with standard ?turbulence model. The results show that air flow fullness in furnace is better in the case of the reburning zone with 8 nozzles compared to 4 nozzles and also coverage effect of the reburning flow for the updraft gas in the furnace is better. In the condition each nozzle airflow velocity is constant, the effect of reburning flow on coverage of up-secondary air is best when the incident angle for four corners is 14.17?, while Center of the furnace wall is 84.57. And while the best incident angle is invariable, the effect of reburning flow on coverage of up-secondary air is best when the speed of reburning gas in the corners of furnace is 51 m/s, the same to the center of the furnace wall’s.
文摘The study was aimed at determining the impacts of operating Manually Operated Hand Lever Knapsack Sprayers (MOHLKS) on physiological responses of the operators as dependent on anthropometric variations and sex. Twenty eight subjects, (4 female, 24 male) Mean ± SD: Age 22.5 ± 1.92, 24.29 ± 2.2 years;Body Mass Index 24.6 ± 4.8, 21.7 ± 2.4 kg/m<sup>2</sup> were employed in the study. Selected anthropometric parameters of weight and height were used to determine body mass index (BMI), with these are arm-reach forward, elbow to fingertip, hand length and hand width were measured to establish human variations in diversity. Subjects undertook the operation at 5 replicates each, before and after which information about operators’ body pain locations and body physiological changes of heart rates were obtained. Measured parameters were used in the determination of expended energy (EE), physiological cost (PC), oxygen intake (VO<sub>2</sub>) and aerobic power (VO<sub>2</sub>max). Alongside with these were operational parameters of stroke, pace and time taken to get the operation done and environmental factors of temperature and relative humidity. The results revealed on the average that the BMI (24.61 ± 4.78 kg/m<sup>2</sup>) in female operators was higher, this corresponded to PC and VO<sub>2</sub>, while the VO<sub>2</sub>max (34.83 ± 3.30 ml/min/kg) in males is higher. More EE was obtained in female subjects (3.53 ± 3.76 kCal/min) as compared to male subjects (3.42 ± 7.48 kCal/min). The main effects plot of operational factors on EE displayed the stroke made by the subjects during spraying operation as parameter with largest effect on EE. Regression equation for EE and PCI is given as PCI = 1.97 + 25.2 EE, while the P-value at α = 0.05 is 0.000 and R<sup>2</sup> = 98.8%. Post operational body pain showed that 19 out of 28 subjects incurred at least one type of body pain, with shoulder pain as most frequent. The results of the study suggest that early incidence of fatigue may occur in female operators as compared to the males, and in addition, cumulative trauma at shoulder, back, and upper and lower arm may result over time. Hence, it is recommended that the tank volume should be reduced and the straps for the shoulders should be supported with additional cushion.
基金Supported by National Natural Science Foundation of China(31401296)Independent Innovation Foundation of Science and Technology in Jiangsu Province(CX(14)2101)
文摘Comparisons were performed between self-propelled boom sprayer and traditional mechanis, such as knapsack sprayer and sprayer-duster, stretcher-type powered sprayer, as well as single rotor unmanned sprayer and multi-rotor un- manned sprayer. The effects on rice injury, lodging, and rehabilitation were conclud- ed and drug uniform distribution, sedimentation and prevention effects were ana- lyzed. The results showed that the self-propelled boom sprayer is characterized by high degree of automation, convenient operation, high adaptability, and high work efficiency. What＇s more, the sprayed fog quality is better, and fog distribution is more uniform. During the work process, fog loss would be diminished substantially, improving work efficiency and cutting down drug and water. It is notable that the underpart of the sprayer can be widely applied to plant protection in large-scale ar- eas in Jiangsu Province, significantly advancing whole-process mechanization of rice production.
基金the financial support for this work provided by the National Key R&D Program of China‘Technologies and Integrated Application of Magnesite Waste Utilization for High-Valued Chemicals and Materials’(2020YFC1909303)。
文摘This study developed a numerical model to efficiently treat solid waste magnesium nitrate hydrate through multi-step chemical reactions.The model simulates two-phase flow,heat,and mass transfer processes in a pyrolysis furnace to improve the decomposition rate of magnesium nitrate.The performance of multi-nozzle and single-nozzle injection methods was evaluated,and the effects of primary and secondary nozzle flow ratios,velocity ratios,and secondary nozzle inclination angles on the decomposition rate were investigated.Results indicate that multi-nozzle injection has a higher conversion efficiency and decomposition rate than single-nozzle injection,with a 10.3%higher conversion rate under the design parameters.The decomposition rate is primarily dependent on the average residence time of particles,which can be increased by decreasing flow rate and velocity ratios and increasing the inclination angle of secondary nozzles.The optimal parameters are injection flow ratio of 40%,injection velocity ratio of 0.6,and secondary nozzle inclination of 30°,corresponding to a maximum decomposition rate of 99.33%.
