An optimization model is established for a multi-product pipeline which has a known delivery demand and operation plan for each off-take station.The aim of this optimization model is to minimize the total pumping oper...An optimization model is established for a multi-product pipeline which has a known delivery demand and operation plan for each off-take station.The aim of this optimization model is to minimize the total pumping operation cost,considering not only factors including the energy equilibrium constraint,the maximum and minimum suction and discharge pressures constraints of pump stations,and pressure constraint at special elevation points,but also the regional differences in electricity prices along the pipeline.The dynamic programming method is applied to solve the model and to find the optimal pump configuration.展开更多
What is pursued by multi-product type and variant volume(MPTVV) production is rapid response and quick switching,so that structure of transferring line in manufacturing system is no longer unalterable.Cell formation...What is pursued by multi-product type and variant volume(MPTVV) production is rapid response and quick switching,so that structure of transferring line in manufacturing system is no longer unalterable.Cell formation(CF) algorithm is the key technology of cellular manufacturing system(CMS).Currently,CF methods are mainly extended on the idea of group technology(GT) that covers a lot on analysis of resource capability matching and its algorithm.Various constraints are considered,but seldom utilized comprehensively.Aimed to the problem of manufacturing cell(MC) formation under MPTVV production mode,integrated formation technologies for typical MC as group type of cell(GC),flow type of cell(FC) and inherited cell(IC) are presented based on technical analysis of CF.Oriented to practical production constraints like delivery time,product batch,equipment ability,key machine,key part and machine sharing,etc,an integrated formation model is constructed and internal interrelations of these constraints are analyzed synthetically.Ulteriorly,formation goals of types of MCs and their formation procedures under joint effect of formation constraints and rules are spread.In case study,three highly balanced GC are formed first;then FC formation are implemented based on the same data which indicate good balancing effect of cell load and flow-style production for key tasks;When task is adjusted,a new scheme is constructed on the result of FC configuration by using IC formation method,and more optimal performance of flow-style production is manifested.The proposed comparative study of different type of cells strongly explains the validation of integrated MC formation in support of rapid manufacturing resource transformation under MPTVV production mode.展开更多
Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take techni- cal/data interactions of multiple products into account. To de...Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take techni- cal/data interactions of multiple products into account. To decrease the influence of technical/data interactions on project progresses, the information flow scheduling models based on the extended DSM is presented. Firstly, infor- mation dependencies are divided into four types: series, parallel, coupling and similar. Secondly, different types of dependencies are expressed as DSM units, and the exten- ded DSM model is brought forward, described as a block matrix. Furthermore, the information flow scheduling methods is proposed, which involves four types of opera- tions, where partitioning and clustering algorithm are modified from DSM for ensuring progress of high-priority project, merging and converting is the specific computation of the extended DSM. Finally, the information flow scheduling of two machine tools development is analyzed with example, and different project priorities correspond to different task sequences and total coordination cost. The proposed methodology provides a detailed instruction for information flow scheduling in multi-product development, with specially concerning technical/data interactions.展开更多
This paper develops an extended newsboy model and presents a formula- tion for this model. This new model has solved the budget contained multi-product newsboy problem with the reactive production. This model can be u...This paper develops an extended newsboy model and presents a formula- tion for this model. This new model has solved the budget contained multi-product newsboy problem with the reactive production. This model can be used to describe the status of entrepreneurial network construction. We use the Lagrange multiplier procedure to deal with our problem, but it is too complicated to get the exact solu-tion. So we introduce the homotopy method to deal with it. We give the flow chart to describe how to get the solution via the homotopy method. We also illustrate our model in both the classical procedure and the homotopy method. Comparing the two methods, we can see that the homotopy method is more exact and efficient.展开更多
Low efficiency, negative impacts on the environment and non-profitable operations are the main shortcomings of out-dated industrial processes. Such systems can be reconstructed and improved in the direction of multi-p...Low efficiency, negative impacts on the environment and non-profitable operations are the main shortcomings of out-dated industrial processes. Such systems can be reconstructed and improved in the direction of multi-product operations. The study of this article focuses on the development of a method for multi-product operations by reconstructing out-dated industrial processes. This article contains the theory of a developed method that enables the updating of existing process units and integrated systems on the basis of reconstruction scenarios and pathways. The goals of the set out method are: 1) to maintain the existing process units and chemical plants to a greater extent, 2) to enable the potential for finding new process alternatives and technological solutions, 3) to provide a streamlined operation for all subsystems and total systems, 4) to promote environmental and social responsibilities, and 5) to apply the concept of the presented reconstruction method to non-profitable industrial processes. In regard to multi-product operations, a conceptual model is a suitable tool for the reconstruction of industrial processes. It connects several software tools and so enables quick decision-making between process alternatives. A reconstruction method provides foresight into the possible improvements to existing industrial processes. In comparison with the indirect synthesis of DME (simple reconstruction pathway), the lower operating costs from the direct synthesis of DME (complex reconstruction pathway) were confirmed.展开更多
This paper addresses the scheduling and inventory management of a straight pipeline system connecting a single refinery to multiple distribution centers.By increasing the number of batches and time periods,maintaining...This paper addresses the scheduling and inventory management of a straight pipeline system connecting a single refinery to multiple distribution centers.By increasing the number of batches and time periods,maintaining the model resolution by using linear programming-based methods and commercial solvers would be very time-consuming.In this paper,we make an attempt to utilize the problem structure and develop a decomposition-based algorithm capable of finding near-optimal solutions for large instances in a reasonable time.The algorithm starts with a relaxed version of the model and adds a family of cuts on the fly,so that a near-optimal solution is obtained within a few iterations.The idea behind the cut generation is based on the knowledge of the underlying problem structure.Computational experiments on a real-world data case and some randomly generated instances confirm the efficiency of the proposed algorithm in terms of the solution quality and time.展开更多
Suppliers play the vital role of ensuring the continuous supply of goods to themarket for businesses.If businesses do not maintain a strong bond with their suppliers,they may not be able to secure a steady supply of g...Suppliers play the vital role of ensuring the continuous supply of goods to themarket for businesses.If businesses do not maintain a strong bond with their suppliers,they may not be able to secure a steady supply of goods and products for their customers.As a result of failure to deliver products,the production and business activities of the business can be delayed which leads to the loss of customers.Normally,each trading enterprise will have a variety of commodity supply chains withmultiple suppliers.Suppliers play an important role and contribute to the value of the entire supply chain.Should any supplier encounters a problem,the whole supply chain of businesses will be affected and could lead to not guaranteeing the stable supply to the market.Thus,suppliers can be seen as a threat to businesses where they have the ability to increase input prices or decrease the quality of the required products and services they provide.The quantity of the business,and the supply lead time directly affect the operations and reduce the profitability of the business.The paper mainly focuses on the supplier selection problemunder a variety of price level and product families when using a two-phase fuzzy multi-objective linear programming.The objectives of the proposed model are to minimize the total purchasing and ordering cost in order to reduce the quantity of defective materials and the late-delivery components from suppliers.Moreover,the piecewise linear membership function is applied in themodel to determine an optimal solution which is based on the requirement of decision makers under their fuzzy environment.The results of this study can be applied in various business environment and provide a reliable decision tool for choosing potential suppliers relating to these objectives.Based on the results,the company canmake a good decision on supplier selection;therefore,the company can improve the quality and quantity of their final product.This is because,the best supplier can supply raw material using just-in-time application and reduce production risk on the manufacturing process.展开更多
This paper presents a multi-objective production planning model for a factory operating under a multi-product, and multi-period environment using the lexicographic (pre-emptive) procedure. The model objectives are to ...This paper presents a multi-objective production planning model for a factory operating under a multi-product, and multi-period environment using the lexicographic (pre-emptive) procedure. The model objectives are to maximize the profit, minimize the total cost, and maximize the Overall Service Level (OSL) of the customers. The system consists of three potential suppliers that serve the factory to serve three customers/distributors. The performance of the developed model is illustrated using a verification example. Discussion of the results proved the efficacy of the model. Also, the effect of the deviation percentages on the different objectives is discussed.展开更多
Using Chinese microdata from 2000 to 2013,we document how demand shocks in export markets lead multi-product exporters to adjust markups across products.We find that,in response to positive demand shocks,quality-based...Using Chinese microdata from 2000 to 2013,we document how demand shocks in export markets lead multi-product exporters to adjust markups across products.We find that,in response to positive demand shocks,quality-based competitive multi-product firms increase product markups significantly,particularly for core products,whereas cost-based competitive multi-product firms respond by reducing product markups.The reason for this is that positive foreign demand affects markups through two opposite channels:pro-innovative effects and pro-competitive ejfects.Pro-innovative effects are predominant among quality-based competitive multi-product firms,and these firms respond to positive foreign demand shocks by increasing product quality,prices,and markups.Pro-competitive ejfects are predominant among cost-based competitive multi-product firms,and these firms respond to positive foreign demand shocks by lowering product cost,prices,and markups.We demonstrate the presence of these mechanisms empirically.The results imply that firms with different competition strategies should adopt different measures in response to foreign demand shocks.展开更多
In this paper,a multi-product newsvendor problem is formulated as a random nonlinear integrated optimization model by taking into consideration the selling price,the producing and outsourcing quantities,and the nonlin...In this paper,a multi-product newsvendor problem is formulated as a random nonlinear integrated optimization model by taking into consideration the selling price,the producing and outsourcing quantities,and the nonlinear budget constraint.Different from the existing models,the demands of products depend on the prices,as well as being timevarying due to random market fluctuation.In addition,outsourcing strategy is adopted to deal with possible shortage caused by the limited capacity.Consequently,the constructed model is involved with joint optimization of the producing and outsourcing quantities,and the selling prices of all the products.For this model with continuous random demands,we first transform it into a nonlinear programming problem by expectation method.Then,an efficient algorithm,called the feasible-direction-based spectral conjugate gradient algorithm,is developed to find a robust solution of the model.By case study and sensitivity analysis,some interesting conclusions are drawn as follows:(a)Budget is a critical constraint for optimizing the decision-making of the retailer,and there exist different threshold values of the budget for the substitute and complementarity scenarios.(b)The price sensitivity matrix seriously affects the maximal expected profit mainly through affecting the optimal outsourcing quantity.展开更多
Robot Application and Adjustment of Export Product Scope:Can We Have Both Efficiency and Quality?Jianhong Qi,Zhitong Zhang Based on the matching data of China Industrial Enterprise Database and China Customs Database ...Robot Application and Adjustment of Export Product Scope:Can We Have Both Efficiency and Quality?Jianhong Qi,Zhitong Zhang Based on the matching data of China Industrial Enterprise Database and China Customs Database from 2000 to 2015,this paper examines the infuence of robot application(RA)on the export product scope(EPS)of multi-product enterprises(MPEs),the influence channels,and the export competition strategies of these enterprises.The research results show that RA has promoted the expansion of EPS of MPEs,and this promotion effect is prominent especially for the export of laborintensive products,resource-intensive products and for non-state-owned enterprises(SOEs).The adjustment of EPS by RA not only enhances efficiency through productivity improvement effect and cost-saving effect,but also improves quality through emission-reduction effect and product quality effect,which is very obvious in long-quality-ladder enterprises.The RA-expanded product scope covers both old products and new products manufactured in the same industry.Facing fierce competition in the same industry,robot-using enterprises prefer quality competition strategy,which further promotes the expansion of EPS.展开更多
A study of the dynamical-fluctuation property of 2-jet events is carried out. It is found that the dynamical fluctuations of the hadronic system inside 2-jet events change with the variation of the cut parameter ycut....A study of the dynamical-fluctuation property of 2-jet events is carried out. It is found that the dynamical fluctuations of the hadronic system inside 2-jet events change with the variation of the cut parameter ycut. There is a transition point, where the dynamical fluctuations in these systems are circular in the transverse plane; and are elliptical in the longitudinal-transverse planes. It is shown that this transition point corresponds to the scale of visible jets. Meanwhile, the dynamical fluctuation properties inside a single-jet in 2-jet and 3-jet events are compared. The dynamical fluctuations inside quark- and gluon-jets are found to be qualitatively different. A scale for the 'visible gluon jet' production is thus obtained.展开更多
文摘An optimization model is established for a multi-product pipeline which has a known delivery demand and operation plan for each off-take station.The aim of this optimization model is to minimize the total pumping operation cost,considering not only factors including the energy equilibrium constraint,the maximum and minimum suction and discharge pressures constraints of pump stations,and pressure constraint at special elevation points,but also the regional differences in electricity prices along the pipeline.The dynamic programming method is applied to solve the model and to find the optimal pump configuration.
基金supported by National Defence Science&Technology Foundation of China(Grant No.K1301020706)
文摘What is pursued by multi-product type and variant volume(MPTVV) production is rapid response and quick switching,so that structure of transferring line in manufacturing system is no longer unalterable.Cell formation(CF) algorithm is the key technology of cellular manufacturing system(CMS).Currently,CF methods are mainly extended on the idea of group technology(GT) that covers a lot on analysis of resource capability matching and its algorithm.Various constraints are considered,but seldom utilized comprehensively.Aimed to the problem of manufacturing cell(MC) formation under MPTVV production mode,integrated formation technologies for typical MC as group type of cell(GC),flow type of cell(FC) and inherited cell(IC) are presented based on technical analysis of CF.Oriented to practical production constraints like delivery time,product batch,equipment ability,key machine,key part and machine sharing,etc,an integrated formation model is constructed and internal interrelations of these constraints are analyzed synthetically.Ulteriorly,formation goals of types of MCs and their formation procedures under joint effect of formation constraints and rules are spread.In case study,three highly balanced GC are formed first;then FC formation are implemented based on the same data which indicate good balancing effect of cell load and flow-style production for key tasks;When task is adjusted,a new scheme is constructed on the result of FC configuration by using IC formation method,and more optimal performance of flow-style production is manifested.The proposed comparative study of different type of cells strongly explains the validation of integrated MC formation in support of rapid manufacturing resource transformation under MPTVV production mode.
基金Supported by National Natural Science Foundation of China(Grant Nos.51475077,51005038)Science and Technology Foundation of Liaoning China(Grant Nos.201301002,2014028012)
文摘Multi-product collaborative development is adopted widely in manufacturing enterprise, while the present multi-project planning models don't take techni- cal/data interactions of multiple products into account. To decrease the influence of technical/data interactions on project progresses, the information flow scheduling models based on the extended DSM is presented. Firstly, infor- mation dependencies are divided into four types: series, parallel, coupling and similar. Secondly, different types of dependencies are expressed as DSM units, and the exten- ded DSM model is brought forward, described as a block matrix. Furthermore, the information flow scheduling methods is proposed, which involves four types of opera- tions, where partitioning and clustering algorithm are modified from DSM for ensuring progress of high-priority project, merging and converting is the specific computation of the extended DSM. Finally, the information flow scheduling of two machine tools development is analyzed with example, and different project priorities correspond to different task sequences and total coordination cost. The proposed methodology provides a detailed instruction for information flow scheduling in multi-product development, with specially concerning technical/data interactions.
文摘This paper develops an extended newsboy model and presents a formula- tion for this model. This new model has solved the budget contained multi-product newsboy problem with the reactive production. This model can be used to describe the status of entrepreneurial network construction. We use the Lagrange multiplier procedure to deal with our problem, but it is too complicated to get the exact solu-tion. So we introduce the homotopy method to deal with it. We give the flow chart to describe how to get the solution via the homotopy method. We also illustrate our model in both the classical procedure and the homotopy method. Comparing the two methods, we can see that the homotopy method is more exact and efficient.
基金This research work was funded by the Public Agency for the Development of the Republic of Slovenia(ADRS),the Ministry of Education,Science,Culture and Sport,for which we sincerely thank them.
文摘Low efficiency, negative impacts on the environment and non-profitable operations are the main shortcomings of out-dated industrial processes. Such systems can be reconstructed and improved in the direction of multi-product operations. The study of this article focuses on the development of a method for multi-product operations by reconstructing out-dated industrial processes. This article contains the theory of a developed method that enables the updating of existing process units and integrated systems on the basis of reconstruction scenarios and pathways. The goals of the set out method are: 1) to maintain the existing process units and chemical plants to a greater extent, 2) to enable the potential for finding new process alternatives and technological solutions, 3) to provide a streamlined operation for all subsystems and total systems, 4) to promote environmental and social responsibilities, and 5) to apply the concept of the presented reconstruction method to non-profitable industrial processes. In regard to multi-product operations, a conceptual model is a suitable tool for the reconstruction of industrial processes. It connects several software tools and so enables quick decision-making between process alternatives. A reconstruction method provides foresight into the possible improvements to existing industrial processes. In comparison with the indirect synthesis of DME (simple reconstruction pathway), the lower operating costs from the direct synthesis of DME (complex reconstruction pathway) were confirmed.
文摘This paper addresses the scheduling and inventory management of a straight pipeline system connecting a single refinery to multiple distribution centers.By increasing the number of batches and time periods,maintaining the model resolution by using linear programming-based methods and commercial solvers would be very time-consuming.In this paper,we make an attempt to utilize the problem structure and develop a decomposition-based algorithm capable of finding near-optimal solutions for large instances in a reasonable time.The algorithm starts with a relaxed version of the model and adds a family of cuts on the fly,so that a near-optimal solution is obtained within a few iterations.The idea behind the cut generation is based on the knowledge of the underlying problem structure.Computational experiments on a real-world data case and some randomly generated instances confirm the efficiency of the proposed algorithm in terms of the solution quality and time.
文摘Suppliers play the vital role of ensuring the continuous supply of goods to themarket for businesses.If businesses do not maintain a strong bond with their suppliers,they may not be able to secure a steady supply of goods and products for their customers.As a result of failure to deliver products,the production and business activities of the business can be delayed which leads to the loss of customers.Normally,each trading enterprise will have a variety of commodity supply chains withmultiple suppliers.Suppliers play an important role and contribute to the value of the entire supply chain.Should any supplier encounters a problem,the whole supply chain of businesses will be affected and could lead to not guaranteeing the stable supply to the market.Thus,suppliers can be seen as a threat to businesses where they have the ability to increase input prices or decrease the quality of the required products and services they provide.The quantity of the business,and the supply lead time directly affect the operations and reduce the profitability of the business.The paper mainly focuses on the supplier selection problemunder a variety of price level and product families when using a two-phase fuzzy multi-objective linear programming.The objectives of the proposed model are to minimize the total purchasing and ordering cost in order to reduce the quantity of defective materials and the late-delivery components from suppliers.Moreover,the piecewise linear membership function is applied in themodel to determine an optimal solution which is based on the requirement of decision makers under their fuzzy environment.The results of this study can be applied in various business environment and provide a reliable decision tool for choosing potential suppliers relating to these objectives.Based on the results,the company canmake a good decision on supplier selection;therefore,the company can improve the quality and quantity of their final product.This is because,the best supplier can supply raw material using just-in-time application and reduce production risk on the manufacturing process.
文摘This paper presents a multi-objective production planning model for a factory operating under a multi-product, and multi-period environment using the lexicographic (pre-emptive) procedure. The model objectives are to maximize the profit, minimize the total cost, and maximize the Overall Service Level (OSL) of the customers. The system consists of three potential suppliers that serve the factory to serve three customers/distributors. The performance of the developed model is illustrated using a verification example. Discussion of the results proved the efficacy of the model. Also, the effect of the deviation percentages on the different objectives is discussed.
基金Tenglong Zhong is grateful for the support by the Youth Project from the National Natural Science Foundation of China(No.71903003)the Program for Innovation Research in Central University of Finance and Economics+1 种基金Ming Xu is grateflil for support from the Beijing-Tianjin-Hebei Coordinated Development Think Tank Basic Research Project from the Chinese Academy of Social Sciences(No.2020P05)the Major Project of Research and Interpretation of the Spirit of the 5th Plenary Session of the 19th Central Committee of the Communist Party of China from the National Office for Philosophy and Social Sciences(No.21ZDA021).
文摘Using Chinese microdata from 2000 to 2013,we document how demand shocks in export markets lead multi-product exporters to adjust markups across products.We find that,in response to positive demand shocks,quality-based competitive multi-product firms increase product markups significantly,particularly for core products,whereas cost-based competitive multi-product firms respond by reducing product markups.The reason for this is that positive foreign demand affects markups through two opposite channels:pro-innovative effects and pro-competitive ejfects.Pro-innovative effects are predominant among quality-based competitive multi-product firms,and these firms respond to positive foreign demand shocks by increasing product quality,prices,and markups.Pro-competitive ejfects are predominant among cost-based competitive multi-product firms,and these firms respond to positive foreign demand shocks by lowering product cost,prices,and markups.We demonstrate the presence of these mechanisms empirically.The results imply that firms with different competition strategies should adopt different measures in response to foreign demand shocks.
基金supported by National Natural Science Foundation of China(Grant No.71671190)。
文摘In this paper,a multi-product newsvendor problem is formulated as a random nonlinear integrated optimization model by taking into consideration the selling price,the producing and outsourcing quantities,and the nonlinear budget constraint.Different from the existing models,the demands of products depend on the prices,as well as being timevarying due to random market fluctuation.In addition,outsourcing strategy is adopted to deal with possible shortage caused by the limited capacity.Consequently,the constructed model is involved with joint optimization of the producing and outsourcing quantities,and the selling prices of all the products.For this model with continuous random demands,we first transform it into a nonlinear programming problem by expectation method.Then,an efficient algorithm,called the feasible-direction-based spectral conjugate gradient algorithm,is developed to find a robust solution of the model.By case study and sensitivity analysis,some interesting conclusions are drawn as follows:(a)Budget is a critical constraint for optimizing the decision-making of the retailer,and there exist different threshold values of the budget for the substitute and complementarity scenarios.(b)The price sensitivity matrix seriously affects the maximal expected profit mainly through affecting the optimal outsourcing quantity.
基金the major project(17ZDA040)of National Social Science Fundthe major project(72192842)of National Natural Science Foundation for their support.
文摘Robot Application and Adjustment of Export Product Scope:Can We Have Both Efficiency and Quality?Jianhong Qi,Zhitong Zhang Based on the matching data of China Industrial Enterprise Database and China Customs Database from 2000 to 2015,this paper examines the infuence of robot application(RA)on the export product scope(EPS)of multi-product enterprises(MPEs),the influence channels,and the export competition strategies of these enterprises.The research results show that RA has promoted the expansion of EPS of MPEs,and this promotion effect is prominent especially for the export of laborintensive products,resource-intensive products and for non-state-owned enterprises(SOEs).The adjustment of EPS by RA not only enhances efficiency through productivity improvement effect and cost-saving effect,but also improves quality through emission-reduction effect and product quality effect,which is very obvious in long-quality-ladder enterprises.The RA-expanded product scope covers both old products and new products manufactured in the same industry.Facing fierce competition in the same industry,robot-using enterprises prefer quality competition strategy,which further promotes the expansion of EPS.
基金the Nation Natural Seienee Foundation ofChina(Grant No.19975021)by theseienee Foundation of the Edueation DePartment of Hubei Provinee
文摘A study of the dynamical-fluctuation property of 2-jet events is carried out. It is found that the dynamical fluctuations of the hadronic system inside 2-jet events change with the variation of the cut parameter ycut. There is a transition point, where the dynamical fluctuations in these systems are circular in the transverse plane; and are elliptical in the longitudinal-transverse planes. It is shown that this transition point corresponds to the scale of visible jets. Meanwhile, the dynamical fluctuation properties inside a single-jet in 2-jet and 3-jet events are compared. The dynamical fluctuations inside quark- and gluon-jets are found to be qualitatively different. A scale for the 'visible gluon jet' production is thus obtained.