Centrifuge modeling of unreinforced and multi-row stabilizing piles reinforced landslides subjected to reservoir water level fluctuation

With the construction of the Three Gorges Reservoir dam,frequent reservoir landslide events have been recorded.In recent years,multi-row stabilizing piles(MRSPs)have been used to stabilize massive reservoir landslides in China.In this study,two centrifuge model tests were carried out to study the unreinforced and MRSP-reinforced slopes subjected to reservoir water level(RWL)operation,using the Taping landslide as a prototype.The results indicate that the RWL rising can provide lateral support within the submerged zone and then produce the inward seepage force,eventually strengthening the slope stability.However,a rapid RWL drawdown may induce outward seepage forces and a sudden debuttressing effect,consequently reducing the effective soil normal stress and triggering partial pre-failure within the RWL fluctuation zone.Furthermore,partial deformation and subsequent soil structure damage generate excess pore water pressures,ultimately leading to the overall failure of the reservoir landslide.This study also reveals that a rapid increase in the downslope driving force due to RWL drawdown significantly intensifies the lateral earth pressures exerted on the MRSPs.Conversely,the MRSPs possess a considerable reinforcement effect on the reservoir landslide,transforming the overall failure into a partial deformation and failure situated above and in front of the MRSPs.The mechanical transfer behavior observed in the MRSPs demonstrates a progressive alteration in relation to RWL fluctuations.As the RWL rises,the mechanical states among MRSPs exhibit a growing imbalance.The shear force transfer factor(i.e.the ratio of shear forces on pile of the n th row to that of the first row)increases significantly with the RWL drawdown.This indicates that the mechanical states among MRSPs tend toward an enhanced equilibrium.The insights gained from this study contribute to a more comprehensive understanding of the failure mechanisms of reservoir landslides and the mechanical behavior of MRSPs in reservoir banks.

3D FEM simulation of flow velocity field for 5052 aluminum alloy multi-row sprocket in cold semi-precision forging process

Based on the design of the multi-row sprocket with a new tooth profile,a cold semi-precision forging process for manufacturing 5052 aluminum alloy multi-row sprocket was presented.Through simulating the forging process of 5052 aluminum alloy sprocket billet with 3D rigid-viscoplastic FEM,both the distributions of flow velocity field in axial(U_Z),radial(U_R) and circumferential(U_θ) directions and the curves of velocity component in different deformation regions were respectively obtained.By comparison and analysis of the velocity varying curves,the velocity component relation conditions for filling the die cavity were clarified.It shows that when the die cavity is almost fully filled,the circumferential velocity U_θ increases sharply,implying that U_θplays a key role in fully filling the die cavity.

Upper-bound and finite element analyses of multi-row sprocket during cold semi-precision forging process

The cold semi-precision forging of a multi-row sprocket was investigated using upper-bound （UB） and finite element methods combined with experiments. Based on the design of a new tooth profile for the sprocket, a cold semi-precision forging process and a kinematically admissible velocity field for filling the die cavity were proposed. Using the UB method, the velocity fields of the sprocket billet in the forming process were divided theoretically and calculated. The process of forging a multi-row sprocket was simulated using the FEM package Deform-3D V6.1 to obtain the distributions of the velocity field and the effective stress field in filling the die cavity. Similar to the simulated results, the experiment on cold forging a 5052 aluminum alloy sprocket was successfully performed. By comparing the calculated （UB method）, experimental and simulated load-stroke curves, the calculated and simulated results were basically in accordance with the experimental results. The study provides a theoretical foundation for the development of the precision forging of multi-row sprockets.

SELF-ALIGNING EVEN LOAD MECHANISM OF MULTI-ROW BEARINGS OF LARGE STRIP ROLLING MILL

The load distribution of multi-row bearings of large strip rolling mill is fully analyzed by 3D contact boundary element method （BEM）. It is found out that bearings are frequently worn out due to serious uneven load on the multi-row rollers. The constraint mechanism of the previous rolling system is found to be unreasonable by theoretical analysis on heavy machinery structure. A mechanism of self-aligning even load for workroll bearing of 2 050 mm hot rolling mill of Baoshan I＆S Co. is developed. This device is manufactured with particular regard to the structure of 2 050 mm hot rolling mill mentioned above. Hence, uneven load on multi-row bearings is greatly relieved and their lives are remarkably prolonged. Meanwhile, theoretical analysis and on-spot tests prove the rationality and validity of the device.

Study on Plant Landscaping Methods in Garden Landscape Construction

Garden landscape is a beautiful complex formed by space and time complementing each other and acting together.Garden plants are the core landscaping elements in garden landscape construction.It is necessary to flexibly use a variety of plant landscaping methods to create a richer and more vivid natural landscape,and promote the improvement of the quality of the living environment and the harmonious coexistence between man and nature.

多层螺旋CT灌注成像在肺癌诊断中的价值

目的:评价多层螺旋CT灌注在诊断肺癌中的价值。材料与方法:回顾性分析2013年1月至2014年12月间经手术确诊的肺部肿瘤患者共48例,患者术前均行CT灌注检查和CT常规增强。结果:肺癌的BV、BF、PS均高于良性病变,而肺癌的MTT则低于良性病变。常规CT增强检查和CTP对肺癌的检出率分别为65%和90%,两者具有统计学差异。结论:多层螺旋CT灌注为肺癌的诊断提供重要信息。

Design and experiment of multi-row pneumatic precision metering device for rapeseed

The main objective of this study was to design a pneumatic disk with four-rows for planting rapeseed and to investigate its performance under several rotating speeds and vacuum pressure values.The effects of rotating speeds,vacuum pressure and rows on seed sucking and retaining were inspected.Six rotating speeds(5 r/min,10 r/min,15 r/min,20 r/min,25 r/min and 30 r/min)incorporated with the application of vacuum pressure were employed for detecting the optimum vacuum amount that was sufficient for seed sucking under each speed.These values of vacuum were found to be 1.1 kPa,1.25 kPa,1.35 kPa,1.65 kPa,1.8 kPa and 2.0 kPa,respectively.Moreover,a regression model was developed for predicting of vacuum pressure that corresponds with each rotating speed.Based on seed mass analysis,statistical differences were found at 5%significance under the influence of speeds and negative pressure and existed also between and within rows according to Duncan’s Test.The highest seed mass means of 3.17 g and 3.96 g were obtained by row 1 under the effects of speed and vacuum pressure,respectively,while the lowest means of 2.79 g and 3.05 g were attained by row 4.Due to the influence of rows,important differences were occurred between row 1(closer to the center of rotation)and row 4(farther one),particularly under high speeds(25 r/min and 30 r/min).Results concluded that,pneumatic disk with multiple-rows could be satisfactorily used for seed sowing with a little variation in seed amount between rows without any seed damage.The rows of hole farther from plate center of rotation were obviously influenced by angular velocity and vacuum amount rather than the closer ones.

Design and experiment of the pneumatic cylinder type precision metering system for wheat

The main goal of this study was to design a pneumatic cylindrical-type metering device with six-rows for wheat precision and to analyze its output under different rotating speeds and vacuum pressure values.The effect of the pressure,rotating speed and rows on seed suction,retention and dropping was shown inspected.Six levels of rotating speed(5,10,15,20,25 and 30 r/min.)combined with the applying of different vacuum pressures(1.8,2.1,2.4,2.7,3.0,and 3.3 kPa)were inspected to detect the optimum pressure which was adequate for seed sucking at each speed.In addition,to predict the vacuum pressure corresponding with each rotating speed,a regression model was developed.Based on seed mass analysis,statistical differences under the influence of velocities and negative pressure were found at 5 percent significance according to Duncan’s Test,whereas the differences were existed between and within rows.Results revealed that the highest seed mass means of 19.02 g and 22.64 g were obtained by row1while the lowest means of 18.02 g and 21.49 g were attained by row6 under the effect of the speed and vacuum pressure,respectively.The noticeable variation between row1 and row 6,particularly under high speeds(25 and 30 r/min),might be returned to the truth that row 1 was closer to vacuum inlet,and row 6 was the farthest one.Results concluded that the multiple-row pneumatic cylinder with oblong shape seed nozzle was found to be capable for single seed picking with a small rows variation but without seed damage.