To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation character...To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation characteristics of plasma of the electrode are investigated, effects of diameter of insulating sleeve, variety of cathode material and length of the insulating sleeve on characteristics of metal ion plasma jet are discussed. Results indicate that a directional and steady plasma jet is formed by using the novel electrode with insulating sleeve under high vacuum conditions. Moreover, the properties of metal ion plasma jet are improved by using the aluminum cathode and thin and long insulating sleeve. The study provides strong support for research of vacuum metal ion plasma thruster and ion implantation technology.展开更多
Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality wit...Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality within the first few weeks after the onset of symptoms. Minimal invasive approaches with high success and low mortality rates are therefore of considerable interest. Endoscopic therapy has the potential to offer safe and effective alternative treatment. We report here on 3 consecutive patients with infected walled-off pancreatic necrosis and 1 patient with a pancreatic abscess who underwent direct endoscopic necrosectomy 19-21 d after the onset of acute pancreatitis. The infected pancreatic necrosis or abscess was punctured transluminally with a cystostome and, after balloon dilatation, a non-covered self-expanding biliary metal stent was placed into the necrotic cavity. Following stent deployment, a nasobiliary pigtail catheter was placed into the cavity to ensure continuous irrigation. After 5-7 d, the metal stent was removed endoscopically and the necrotic cavity was entered with a therapeutic gastroscope. Endoscopic debridement was performed via the simultaneous application of a high-flow water-jet system; using a flush knife, a Dormia basket, and hot biopsy forceps. The transluminal endotherapy was repeated 2-5 times daily during the next 10 d. Supportive care included parenteral antibiotics and jejunal feeding. All patients improved dramatically and with resolution of their septic conditions; 3 patients were completely cured without any further complications or the need for surgery. One patient died from a complication of prolonged ventilation severe bilateral pneumonia, not related to the endoscopic procedure. No procedure related complications were observed. Transluminal endoscopic necrosectomy with temporary application of a self-expanding metal stent and a high-flow water-jet system shows promise for enhancing the potential of this endoscopic approach in patients with walled-off pancreatic necrosis and/or a pancreatic abscess.展开更多
In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance ...In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance on the anode side on the discharge characteristics and the generation characteristics of plasma jet are investigated.Results show that the existence of a resistor on the anode side can increase the anode potential,thereby preventing charged particles from entering the anode and promoting the ejection of charged particles along the axis of the insulating sleeve nozzle.The application of a capacitor on the anode side can not only absorb electrons at the initial stage of discharge,increasing the peak value of the cathode hump potential,but also prevent charged particles from moving to the anode,thereby improving the ejection performance of the plasma jet.In addition,the use of a larger resistance and a smaller capacitance can improve the blocking effect on charged particles and further improve the ejection performance of the plasma jet.Results of this study will provide a reference for the improvement of the ejection performance of plasma jets and their applications.展开更多
Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting ...Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials： AISI 4340 （high strength low alloy steel, hardened to 49HRc） and Aluminum 2219. Analysis of Variance （ANOVA） was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.展开更多
Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve fle...Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve flexible connector,the IPMC linear driving unit simulation model is built and the IPMC material-driving dynamic control structure of bionic gill unit is developed.Meanwhile,through the stress analysis of bionic gill plate and the motion simulation of bionic gill unit,it is verified that various dynamic control and active control of the jet orifice under the condition of different mainstream field velocities will be taken by using IPMC material-driving.Moreover,the large-deflection deformation of bionic gill plate under dynamic pressure and the comparative analysis with that of a rigid gill plate is studied,leading to the achievement of approximate revised modifier from real value to theoretical value of the displacement control of IPMC.展开更多
Weight reduction is a key driving force for materials development in aerospace industry,which leads to extensive usage of lightweight structural materials such as fiber reinforced polymer(FRP),titanium alloy,aluminum ...Weight reduction is a key driving force for materials development in aerospace industry,which leads to extensive usage of lightweight structural materials such as fiber reinforced polymer(FRP),titanium alloy,aluminum alloy,etc.Hole making is indispensable to assembling these lightweight components by riveted or bolted joints.However,hole making of FRP / metal stacks is always the most challenging task due to differences of material properties between FRP and metals.A comprehensive literature review on hole making of FRP/metal stacks in the last decade is given with a focus on four main aspects including drilling operation,drilling damages and machining parameter optimization,tool performance and wear,and developments in hole making technology.Finally,in order to ensure the precise and efficient hole making of FRP/metal stacks,an idea of low frequency vibration assisted drilling(LFVAD)FRP/metal stacks based on material removal characteristics is put forward by fully exploiting the unique advantages of LFVAD technology.展开更多
Liquid metal free surface flows （films, jets and droplets） are considered as diverter/ limiter system and first wall in fusion reactor, but the knowledge Of liquid metal free surface under a non-uniform magnetic fie...Liquid metal free surface flows （films, jets and droplets） are considered as diverter/ limiter system and first wall in fusion reactor, but the knowledge Of liquid metal free surface under a non-uniform magnetic field is very limited. In this article, the stability of a jet flow under a gradient magnetic field is investigated, and its MHD effects are the top concern. Based on numerical simulation and experimental results, a simplified model is developed to analyze the MHD effects of the jet flow and to explain the reason why it can keep stable under a strong non-uniform magnetic field.展开更多
基金supported by National Natural Science Foundation of China(No.51577011)
文摘To improve the performance of a metal ion plasma jet in vacuum discharge, an anode-insulated cone-cylinder electrode with insulating sleeve is proposed in this paper. Discharge characteristics and generation characteristics of plasma of the electrode are investigated, effects of diameter of insulating sleeve, variety of cathode material and length of the insulating sleeve on characteristics of metal ion plasma jet are discussed. Results indicate that a directional and steady plasma jet is formed by using the novel electrode with insulating sleeve under high vacuum conditions. Moreover, the properties of metal ion plasma jet are improved by using the aluminum cathode and thin and long insulating sleeve. The study provides strong support for research of vacuum metal ion plasma thruster and ion implantation technology.
文摘Walled-off pancreatic necrosis and a pancreatic abscess are the most severe complications of acute pancreatitis. Surgery in such critically ill patients is often associated with significant morbidity and mortality within the first few weeks after the onset of symptoms. Minimal invasive approaches with high success and low mortality rates are therefore of considerable interest. Endoscopic therapy has the potential to offer safe and effective alternative treatment. We report here on 3 consecutive patients with infected walled-off pancreatic necrosis and 1 patient with a pancreatic abscess who underwent direct endoscopic necrosectomy 19-21 d after the onset of acute pancreatitis. The infected pancreatic necrosis or abscess was punctured transluminally with a cystostome and, after balloon dilatation, a non-covered self-expanding biliary metal stent was placed into the necrotic cavity. Following stent deployment, a nasobiliary pigtail catheter was placed into the cavity to ensure continuous irrigation. After 5-7 d, the metal stent was removed endoscopically and the necrotic cavity was entered with a therapeutic gastroscope. Endoscopic debridement was performed via the simultaneous application of a high-flow water-jet system; using a flush knife, a Dormia basket, and hot biopsy forceps. The transluminal endotherapy was repeated 2-5 times daily during the next 10 d. Supportive care included parenteral antibiotics and jejunal feeding. All patients improved dramatically and with resolution of their septic conditions; 3 patients were completely cured without any further complications or the need for surgery. One patient died from a complication of prolonged ventilation severe bilateral pneumonia, not related to the endoscopic procedure. No procedure related complications were observed. Transluminal endoscopic necrosectomy with temporary application of a self-expanding metal stent and a high-flow water-jet system shows promise for enhancing the potential of this endoscopic approach in patients with walled-off pancreatic necrosis and/or a pancreatic abscess.
基金supported by the Fundamental Research Funds for the Central Universities(No.2019YJS187)National Natural Science Foundation of China(No.51577011)。
文摘In a pulsed vacuum discharge,the ejection performance of a metal plasma jet can be effectively improved by preventing charged particles from moving to the anode.In this paper,the effects of resistance and capacitance on the anode side on the discharge characteristics and the generation characteristics of plasma jet are investigated.Results show that the existence of a resistor on the anode side can increase the anode potential,thereby preventing charged particles from entering the anode and promoting the ejection of charged particles along the axis of the insulating sleeve nozzle.The application of a capacitor on the anode side can not only absorb electrons at the initial stage of discharge,increasing the peak value of the cathode hump potential,but also prevent charged particles from moving to the anode,thereby improving the ejection performance of the plasma jet.In addition,the use of a larger resistance and a smaller capacitance can improve the blocking effect on charged particles and further improve the ejection performance of the plasma jet.Results of this study will provide a reference for the improvement of the ejection performance of plasma jets and their applications.
文摘Full factorial design of experiments was developed in order to investigate the effects of jet pressure, abrasive mixing rate, cutting feed, and plate thickness upon three response variables, surface finish of cutting wear zone, percentage proportion of striation free area, and maximum width of cut. The set of sixteen experiments was performed on each of the following two ductile materials： AISI 4340 （high strength low alloy steel, hardened to 49HRc） and Aluminum 2219. Analysis of Variance （ANOVA） was performed on experimental data in order to determine the significance of effects of different parameters on the performance measures. It was found that cutting feed and thickness were highly influential parameters, while abrasive mixing rate is influential upon surface roughness only. Strong interaction was found between jet pressure and workpiece material. Multi-criteria numerical optimization was performed in order to simultaneously maximize/minimize different combinations of performance measures.
基金Project(51275102)supported by the National Natural Science Foundation of ChinaProject(HEUCF140713)supported by the Fundamental Research Funds for the Central Universities,China
文摘Based on the biological prototype characteristics of shark’s gill jet orifice,the flexible driving characteristics of ionic exchange polymer metal composites(IPMC)artificial muscle materials and the use of sleeve flexible connector,the IPMC linear driving unit simulation model is built and the IPMC material-driving dynamic control structure of bionic gill unit is developed.Meanwhile,through the stress analysis of bionic gill plate and the motion simulation of bionic gill unit,it is verified that various dynamic control and active control of the jet orifice under the condition of different mainstream field velocities will be taken by using IPMC material-driving.Moreover,the large-deflection deformation of bionic gill plate under dynamic pressure and the comparative analysis with that of a rigid gill plate is studied,leading to the achievement of approximate revised modifier from real value to theoretical value of the displacement control of IPMC.
基金supported by the National Natural Science Foundation of China (No. 51875284)
文摘Weight reduction is a key driving force for materials development in aerospace industry,which leads to extensive usage of lightweight structural materials such as fiber reinforced polymer(FRP),titanium alloy,aluminum alloy,etc.Hole making is indispensable to assembling these lightweight components by riveted or bolted joints.However,hole making of FRP / metal stacks is always the most challenging task due to differences of material properties between FRP and metals.A comprehensive literature review on hole making of FRP/metal stacks in the last decade is given with a focus on four main aspects including drilling operation,drilling damages and machining parameter optimization,tool performance and wear,and developments in hole making technology.Finally,in order to ensure the precise and efficient hole making of FRP/metal stacks,an idea of low frequency vibration assisted drilling(LFVAD)FRP/metal stacks based on material removal characteristics is put forward by fully exploiting the unique advantages of LFVAD technology.
基金Supported by National Natural Science Foundation of China（B10275019）
文摘Liquid metal free surface flows （films, jets and droplets） are considered as diverter/ limiter system and first wall in fusion reactor, but the knowledge Of liquid metal free surface under a non-uniform magnetic field is very limited. In this article, the stability of a jet flow under a gradient magnetic field is investigated, and its MHD effects are the top concern. Based on numerical simulation and experimental results, a simplified model is developed to analyze the MHD effects of the jet flow and to explain the reason why it can keep stable under a strong non-uniform magnetic field.
