A Fusion Localization Method Based on Target Measurement Error Feature Complementarity and Its Application

In the multi-radar networking system,aiming at the problem of locating long-distance targets synergistically with difficulty and low accuracy,a dual-station joint positioning method based on the target measurement error feature complementarity is proposed.For dual-station joint positioning,by constructing the target positioning error distribution model and using the complementarity of spatial measurement errors of the same long-distance target,the area with high probability of target existence can be obtained.Then,based on the target distance information,the midpoint of the intersection between the target positioning sphere and the positioning tangent plane can be solved to acquire the target's optimal positioning result.The simulation demonstrates that this method greatly improves the positioning accuracy of target in azimuth direction.Compared with the traditional the dynamic weighted fusion(DWF)algorithm and the filter-based dynamic weighted fusion(FBDWF)algorithm,it not only effectively eliminates the influence of systematic error in the azimuth direction,but also has low computational complexity.Furthermore,for the application scenarios of multi-radar collaborative positioning and multi-sensor data compression filtering in centralized information fusion,it is recommended that using radar with higher ranging accuracy and the lengths of baseline between radars are 20–100 km.

A Novel Multi-sensor Data Fusion Algorithm and Its Application to Diagnostics

To Meet the requirements of multi-sensor data fusion in diagnosis for complex equipment systems,a novel, fuzzy similarity-based data fusion algorithm is given. Based on fuzzy set theory, it calculates the fuzzy similarity among a certain sensor's measurement values and the multiple sensor's objective prediction values to determine the importance weigh of each sensor,and realizes the multi-sensor diagnosis parameter data fusion.According to the principle, its application software is also designed. The applied example proves that the algorithm can give priority to the high-stability and high -reliability sensors and it is laconic ,feasible and efficient to real-time circumstance measure and data processing in engine diagnosis.

Applications of state estimation in multi-sensor information fusion for the monitoring of open pit mine slope deformation

The traditional open pit mine slope deformation monitoring system can not use the monitoring information coming from many monitoring points at the same time, can only using the monitoring data coming from a key monitoring point,and that is to say it can only handle one-dimensional time series.Given this shortage in the monitoring, the multi-sensor information fusion in the state estimation techniques would be intro- duced to the slope deformation monitoring system,and by the dynamic characteristics of deformation slope,the open pit slope would be regarded as a dynamic goal,the condi- tion monitoring of which would be regarded as a dynamic target tracking.Distributed In- formation fusion technology with feedback was used to process the monitoring data and on this basis Klman filtering algorithms was introduced,and the simulation examples was used to prove its effectivenes.

Disparity estimation for multi-scale multi-sensor fusion

The perception module of advanced driver assistance systems plays a vital role.Perception schemes often use a single sensor for data processing and environmental perception or adopt the information processing results of various sensors for the fusion of the detection layer.This paper proposes a multi-scale and multi-sensor data fusion strategy in the front end of perception and accomplishes a multi-sensor function disparity map generation scheme.A binocular stereo vision sensor composed of two cameras and a light deterction and ranging(LiDAR)sensor is used to jointly perceive the environment,and a multi-scale fusion scheme is employed to improve the accuracy of the disparity map.This solution not only has the advantages of dense perception of binocular stereo vision sensors but also considers the perception accuracy of LiDAR sensors.Experiments demonstrate that the multi-scale multi-sensor scheme proposed in this paper significantly improves disparity map estimation.

Research on the Mechanism of Multi-Sensor Fusion Configuration Based on the Optimal Principle of the Vehicle

In order to address the issue of sensor configuration redundancy in intelligent driving,this paper constructs a multi-objective optimization model that considers cost,coverage ability,and perception performance.And then,combining a specific set of parameters,the NSGA-II algorithm is used to solve the multi-objective model established in this paper,and a Pareto front containing 24 typical configuration schemes is extracted after considering empirical constraints.Finally,using the decision preference method proposed in this paper that combines subjective and objective factors,decision scores are calculated and ranked for various configuration schemes from both cost and performance preferences.The research results indicate that the multi-objective optimization model established in this paper can screen and optimize various configuration schemes from the optimal principle of the vehicle,and the optimized configuration schemes can be quantitatively ranked to obtain the decision results for the vehicle under different preference tendencies.

A Fusion Neutron Source Driven Sub-Critical Nuclear Energy System: A Way for Early Application of Fusion Technology

This paper proposes a sub-critical nuclear energy system driven by fusion neutron source, FDS, which can be used to transmute long-lived radioactive wastes and to produce fissile nuclear fuel as a way for early application of fusion technology. The necessity and feasibility to develop that system in China are illustrated on the basis of prediction of the demand of energy source in the first half of the 21th century, the status of current fission energy supply and the progress in fusion technology in the world. The characteristics of fusion neutron driver and the potential for transmutation of long-lived nuclear wastes and breeding of fissile nuclear fuel in a blanket are analyzed. A scenario of development steps is proposed.

State Estimation Method for GNSS/INS/Visual Multi-sensor Fusion Based on Factor Graph Optimization for Unmanned System

With the development of unmanned driving technology,intelligent robots and drones,high-precision localization,navigation and state estimation technologies have also made great progress.Traditional global navigation satellite system/inertial navigation system(GNSS/INS)integrated navigation systems can provide high-precision navigation information continuously.However,when this system is applied to indoor or GNSS-denied environments,such as outdoor substations with strong electromagnetic interference and complex dense spaces,it is often unable to obtain high-precision GNSS positioning data.The positioning and orientation errors will diverge and accumulate rapidly,which cannot meet the high-precision localization requirements in large-scale and long-distance navigation scenarios.This paper proposes a method of high-precision state estimation with fusion of GNSS/INS/Vision using a nonlinear optimizer factor graph optimization as the basis for multi-source optimization.Through the collected experimental data and simulation results,this system shows good performance in the indoor environment and the environment with partial GNSS signal loss.

Data acquisition,analysis and applications of multi-sensor integration

This paper presents some key techniques for multi-sensor integration system, which is applied to the intelligent transportation system industry and surveying and mapping industry, e.g. road surface condition detection, digital map making. The techniques are synchronization control of multi-sensor, space-time benchmark for sensor data, and multi-sensor data fusion and mining. Firstly, synchronization control of multi-sensor is achieved through a synchronization control system which is composed of a time synchronization controller and some synchronization sub-controllers. The time synchronization controller can receive GPS time information from GPS satellites, relative distance information from distance measuring instrument and send space-time information to the synchronization sub-controller. The latter can work at three types of synchronization mode, i.e. active synchronization, passive synchronization and time service synchronization. Secondly, space-time benchmark can be established based on GPS time and global reference coordinate system, and can be obtained through position and azimuth determining system and synchronization control system. Thirdly, there are many types of data fusion and mining, e.g. GPS/Gyro/DMI data fusion, data fusion between stereophotogrammetry and PADS, data fusion between laser scanner and PADS, and data fusion between CCD camera and laser scanner. Finally, all these solutions presented in paper have been applied to two areas, i.e. land-bone intelligent road detection and measurement system and 3D measurement system based on unmanned helicopter. The former has equipped some highway engineering Co. , Ltd. and has been successfully put into use. The latter is an ongoing resealch.

Application of Attributes Fusion Technology in Prediction of Deep Reservoirs in Paleogene of Bohai Sea

1 Introduction The Paleogene strata(with a depth of more than 2500m)in the Bohai sea is complex(Xu Changgui,2006),the reservoir buried deeply,the reservoir prediction is difficult(LAI Weicheng,XU Changgui,2012),and more

Weighted Multi-sensor Data Level Fusion Method of Vibration Signal Based on Correlation Function

As the differences of sensor＇s precision and some random factors are difficult to control,the actual measurement signals are far from the target signals that affect the reliability and precision of rotating machinery fault diagnosis.The traditional signal processing methods,such as classical inference and weighted averaging algorithm usually lack dynamic adaptability that is easy for trends to cause the faults to be misjudged or left out.To enhance the measuring veracity and precision of vibration signal in rotary machine multi-sensor vibration signal fault diagnosis,a novel data level fusion approach is presented on the basis of correlation function analysis to fast determine the weighted value of multi-sensor vibration signals.The approach doesn＇t require knowing the prior information about sensors,and the weighted value of sensors can be confirmed depending on the correlation measure of real-time data tested in the data level fusion process.It gives greater weighted value to the greater correlation measure of sensor signals,and vice versa.The approach can effectively suppress large errors and even can still fuse data in the case of sensor failures because it takes full advantage of sensor＇s own-information to determine the weighted value.Moreover,it has good performance of anti-jamming due to the correlation measures between noise and effective signals are usually small.Through the simulation of typical signal collected from multi-sensors,the comparative analysis of dynamic adaptability and fault tolerance between the proposed approach and traditional weighted averaging approach is taken.Finally,the rotor dynamics and integrated fault simulator is taken as an example to verify the feasibility and advantages of the proposed approach,it is shown that the multi-sensor data level fusion based on correlation function weighted approach is better than the traditional weighted average approach with respect to fusion precision and dynamic adaptability.Meantime,the approach is adaptable and easy to use,can be applied to other areas of vibration measurement.

Data Fusion in Distributed Multi-sensor System

This paper presents a data fusion method in distributed multi-sensor system including GPS and INS sensors’ data processing. First, a residual χ 2 \|test strategy with the corresponding algorithm is designed. Then a coefficient matrices calculation method of the information sharing principle is derived. Finally, the federated Kalman filter is used to combine these independent, parallel, real\|time data. A pseudolite (PL) simulation example is given.

STUDY ON THE COAL-ROCK INTERFACE RECOGNITION METHOD BASED ON MULTI-SENSOR DATA FUSION TECHNIQUE

The coal-rock interface recognition method based on multi-sensor data fusiontechnique is put forward because of the localization of single type sensor recognition method. Themeasuring theory based on multi-sensor data fusion technique is analyzed, and hereby the testplatform of recognition system is manufactured. The advantage of data fusion with the fuzzy neuralnetwork (FNN) technique has been probed. The two-level FNN is constructed and data fusion is carriedout. The experiments show that in various conditions the method can always acquire a much higherrecognition rate than normal ones.

Multi-sensor measurement and data fusion technology for manufacturing process monitoring:a literature review

Due to the rapid development of precision manufacturing technology,much research has been conducted in the field of multisensor measurement and data fusion technology with a goal of enhancing monitoring capabilities in terms of measurement accuracy and information richness,thereby improving the efficiency and precision of manufacturing.In a multisensor system,each sensor independently measures certain parameters.Then,the system uses a relevant signalprocessing algorithm to combine all of the independent measurements into a comprehensive set of measurement results.The purpose of this paper is to describe multisensor measurement and data fusion technology and its applications in precision monitoring systems.The architecture of multisensor measurement systems is reviewed,and some implementations in manufacturing systems are presented.In addition to the multisensor measurement system,related data fusion methods and algorithms are summarized.Further perspectives on multisensor monitoring and data fusion technology are included at the end of this paper.

Rui Liao's work on patient-specific 3-D model guidance for interventional and hybrid-operating-room applications

Compared to surgery,interventional and hybrid-operating-room(OR) approaches diagnose or treat pathology with the most minimally invasive techniques possible.By minimizing the physical trauma to the patient,peripheral or hybrid approaches can reduce infection rates and recovery time as well as shorten hospital stays.Minimally invasive approaches therefore are the trend and often the preferred choice,and may even be the only option for the patients associated with high surgery risks.Common interventional imaging modalities include 2-D X-ray fluoroscopy and ultrasound.However,fluoroscopic images do not display the anatomic structures without a contrast agent,which on the other hand,needs to be minimized for patients' safety.Ultrasound images suffer from relatively low image quality and tissue contrast problems.To augment the doctor's view of the patient's anatomy and help doctors navigate the devices to the targeted area with more confidence and a higher accuracy,high-resolution pre-operative volumetric data such as computed tomography and/or magnetic resonance can be fused with intra-operative 2-D images during interventions.A seamless workflow and accurate 2-D/3-D registrationas well as cardiac and/or respiratory motion compensation are the key components for a successful image guidance system using a patient-specific 3-D model.Dr.Liao's research has been focused on developing methods and systems of 3-D model guidance for various interventions and hybrid-OR applications.Dr.Liao' s work has led to several Siemens products with high clinical and/or market impact and a good number of scientific publications in leading journals/conferences on medical imaging.

An Indoor Pedestrian Localization Algorithm Based on Multi-Sensor Information Fusion

For existing indoor localization algorithm has low accuracy, high cost in deployment and maintenance, lack of robustness, and low sensor utilization, this paper proposes a particle filter algorithm based on multi-sensor fusion. The pedestrian’s localization in indoor environment is described as dynamic system state estimation problem. The algorithm combines the smart mobile terminal with indoor localization, and filters the result of localization with the particle filter. In this paper, a dynamic interval particle filter algorithm based on pedestrian dead reckoning (PDR) information and RSSI localization information have been used to improve the filtering precision and the stability. Moreover, the localization results will be uploaded to the server in time, and the location fingerprint database will be built incrementally, which can adapt the dynamic changes of the indoor environment. Experimental results show that the algorithm based on multi-sensor improves the localization accuracy and robustness compared with the location algorithm based on Wi-Fi.

A Study of Multi-sensor Data Fusion System Based on MAS for Nutrient Solution Measurement

For complementarity and redundancy of multi-sensor data fusion (MSDF) system,it is an effective approach for multiple components measurement.In order to measure nutrient solution on-line,a dynamic and complex system under greenhouse environment,sensors should have intelligent properties including self-calibration and self-compensation. Meanwhile,it is necessary for multiple sensors to cooperate and interact for enhancing reliability of multi-sensor system. Because of the properties of multi-agent system (MAS),it is an appropriate tool to study MSDF system.This paper proposed an architecture of MSDF system based on MAS for the multiple components measurement of nutrient solution.The sensor agent's structure and function modules are analyzed and described in detail,the formal definitions are given,too.The relations of the sensors are modeled to implement reliability diagnosis of the multi-sensor system,so that the reliability of nutrient control system is enhanced.This study offers an effective approach for the study of MSDF.

Multi-sensor Data Fusion by Improved Hough Transformation

In this paper we present an evidence-gathering approach to slove the multi-sensor data fusion problem. It uses an improved Hough transformation method rather than the usual statistical or geometric approach to extract the directions and positions of the walls in a room and update the location (orientation and position)of a mobile robot. The simulation results show that the proposed method is of practical importance since it is very simple and easy to implement.

Obstacle avoidance technology of bionic quadruped robot based on multi-sensor information fusion

In order to improve the ability of a bionic quadruped robot to percept the location of obstacles in a complex and dynamic environment, the information fusion between an ultrasonic sensor and a binocular sensor was studied under the condition that the robot moves in the Walk gait on a structured road. Firstly, the distance information of obstacles from these two sensors was separately processed by the Kalman filter algorithm, which largely reduced the noise interference. After that, we obtained two groups of estimated distance values from the robot to the obstacle and a variance of the estimation value. Additionally, a fusion of the estimation values and the variances was achieved based on the STF fusion algorithm. Finally, a simulation was performed to show that the curve of a real value was tracked well by that of the estimation value, which attributes to the effectiveness of the Kalman filter algorithm. In contrast to statistics before fusion, the fusion variance of the estimation value was sharply decreased. The precision of the position information is 4. 6 cm, which meets the application requirements of the robot.

A Multi-Stage Security Solution for Medical Color Images in Healthcare Applications

This paper presents a robust multi-stage security solution based on fusion,encryption,and watermarking processes to transmit color healthcare images,efficiently.The presented solution depends on the features of discrete cosine transform(DCT),lifting wavelet transform(LWT),and singular value decomposition(SVD).The primary objective of this proposed solution is to ensure robustness for the color medical watermarked images against transmission attacks.During watermark embedding,the host color medical image is transformed into four sub-bands by employing three stages of LWT.The resulting low-frequency sub-band is then transformed by employing three stages of DCT followed by SVD operation.Furthermore,a fusion process is used for combining different watermarks into a single watermark image.This single fused image is then ciphered using Deoxyribose Nucleic Acid(DNA)encryption to strengthen the security.Then,the DNA-ciphered fused watermark is embedded in the host medical image by applying the suggested watermarking technique to obtain the watermarked image.The main contribution of this work is embedding multiple watermarks to prevent identity theft.In the presence of different multimedia attacks,several simulation tests on different colormedical images have been performed.The results prove that the proposed security solution achieves a decent imperceptibility quality with high Peak Signal-to-Noise Ratio(PSNR)values and high correlation between the extracted and original watermark images.Moreover,the watermark image extraction process succeeds in achieving high efficiency in the presence of attacks compared with related works.

Progress and Achievements of Multi-sensor Fusion Navigation in China during 2019—2023

Global Navigation Satellite System(GNSS)can provide all-weather,all-time,high-precision positioning,navigation and timing services,which plays an important role in national security,national economy,public life and other aspects.However,in environments with limited satellite signals such as urban canyons,tunnels,and indoor spaces,it is difficult to provide accurate and reliable positioning services only by satellite navigation.Multi-source sensor integrated navigation can effectively overcome the limitations of single-sensor navigation through the fusion of different types of sensor data such as Inertial Measurement Unit(IMU),vision sensor,and LiDAR,and provide more accurate,stable and robust navigation information in complex environments.We summarizes the research status of multi-source sensor integrated navigation technology,and focuses on the representative innovations and applications of integrated navigation and positioning technology by major domestic scientific research institutions in China during 2019—2023.