Dynamic Response Impact of Vehicle Braking on Simply Supported Beam Bridges with Corrugated Steel Webs Based on Vehicle-Bridge Coupled Vibration Analysis

A novel approach for analyzing coupled vibrations between vehicles and bridges is presented,taking into account spatiotemporal effects and mechanical phenomena resulting fromvehicle braking.Efficient modeling and solution of bridge vibrations induced by vehicle deceleration are realized using this method.The method’s validity and reliability are substantiated through numerical examples.A simply supported beam bridge with a corrugated steel web is taken as an example and the effects of parameters such as the initial vehicle speed,braking acceleration,braking location,and road surface roughness on the mid-span displacement and impact factor of the bridge are analyzed.The results show that vehicle braking significantly amplifies mid-span displacement and impact factor responses in comparison to uniform vehicular motion across the bridge.Notably,the influence of wheelto-bridge friction forces is of particular significance and cannot be overlooked.When the vehicle initiates braking near the middle of the span,both the mid-span displacement and impact factor of the bridge exhibit substantial increases,further escalating with higher braking acceleration.Under favorable road surface conditions,the midspan displacement and the impact factor during vehicle braking may exceed the design values stipulated by codes.It is important to note that road surface roughness exerts a more pronounced effect on the impact factor of the bridge in comparison to the effects of vehicle braking.

Experimental and Numerical Investigation on the Aerodynamic Characteristics of High-Speed Pantographs with Supporting Beam Wind Deflectors

Aiming to mitigate the aerodynamic lift force imbalance between pantograph strips,which exacerbates wear and affects the current collection performance of the pantograph-catenary system,a study has been conducted to support the beam deflector optimization using a combination of experimental measurements and computational fluid dynamics(CFD)simulations.The results demonstrate that the size,position,and installation orientation of the wind deflectors significantly influence the amount of force compensation.They also indicate that the front strip deflectors should be installed downwards and the rear strip deflectors upwards,thereby forming a“π”shape.Moreover,the lift force compensation provided by the wind deflectors increases with the size of the deflector.Alternative wind compensation strategies,such as control circuits,are also discussed,putting emphasis on the pros and cons of various pantograph types and wind compensation approaches.

Effect of temperature difference load of 32 m simply supported box beam bridge on track vertical irregularity

In order to study the effect of temperature difference load （TDL） along the vertical direction of a simply supported beam bridge section on the vertical irregularity, a rail-bridge-piers calculation model was established. Taking 32 m simply supported box beam bridge which is widely used in the construction of pas- senger dedicated line in China as an example, influences of the temperature variation between the bottom and top of the bridge, temperature curve index, type of temperature gradient, and beam height on track vertical irregularity were analyzed with the model. The results show that TDL has more effects on long wave track irregularity than on short one, and the wavelength mainly affected is approxi- mately equal to the beam span. The amplitude of irregu- larity caused by TDL is largely affected by the temperature variation, temperature curve index, and type of temperature gradient, so it is necessary to monitor the temperaturedistribution of bridges in different regions to provide accurate calculation parameters. In order to avoid the irregularity exceeding the limit values, the height of 32, 48, and 64 m simply supported box beam bridges must not be less than 2.15, 3.2, and 4.05 m, respectively.

ANALYTICAL SOLUTION OF A SIMPLY SUPPORTED PIEZOELECTRIC BEAM SUBJECTED TO A UNIFORMLY DISTRIBUTED LOADING

Using the inverse method, the analytical solution of a simply supported piezoelectric beam subjected to a uniformly distributed loading has been studied.First,the polynomials of stress function and induction function are given.Then, considering the gradient properties of the elastic parameter and the potential funciton as well as the piezoelectric parameter,the analytical solution of a simply supported beam subjected to a uniformly distributed loading is obtained and discussed.

STABILITY AND LOCAL BIFURCATION IN A SIMPLY-SUPPORTED BEAM CARRYING A MOVING MASS

The stability and local bifurcation of a simply-supported flexible beam （Bernoulli- Euler type） carrying a moving mass and subjected to harmonic axial excitation are investigated. In the theoretical analysis, the partial differential equation of motion with the fifth-order nonlinear term is solved using the method of multiple scales （a perturbation technique）. The stability and local bifurcation of the beam are analyzed for 1/2 sub harmonic resonance. The results show that some of the parameters, especially the velocity of moving mass and external excitation, affect the local bifurcation significantly. Therefore, these parameters play important roles in the system stability.

Buckling of stepped beams with elastic supports

The tangent stiffness matrix of Timoshenko beam element is applied in the buckling of multi-step beams under several concentrated axial forces with elastic supports. From the governing differential equation of lateral deflection including second-order effects,the relationship of force versus displacement is established. In the formulation of finite element method (FEM),the stiffness matrix developed has the same accuracy with the solution of exact differential equations. The proposed tangent stiffness matrix will degenerate into the Bernoulli-Euler beam without the effects of shear deformation. The critical buckling force can be determined from the determinant element assemblage by FEM. The equivalent stiffness matrix constructed by the topmost deflection and slope is established by static condensation method,and then a recurrence formula is proposed. The validity and efficiency of the proposed method are shown by solving various numerical examples found in the literature.

FE Dynamic Analysis Using Moving Support Element on Multi-Span Beams Subjected to Support Motions

In the present study, finite element dynamic analysis or time history analysis of two-span beams subjected to asynchronous multi-support motions is carried out by using the moving support finite element. The elemental equation of the element is based on total displacements and is derived under the concept of the quasi-static displacement decomposition. The use of moving support element shows that the element is very simple and convenient to represent continuous beam moving, deforming and vibrating simultaneously due to support motions. The comparison between the numerical results and analytical solutions indicates that the FE result agrees with the analytical solution.

Finite Element Modeling of Stability of Beam-Column Supports for Field Fabricated Spherical Storage Pressure Vessels

Spherical pressure vessels in large sizes are generally supported on legs or columns evenly spaced around the circumference. The legs are attached at or near the equator of the sphere. This research work focussed on flexural-torsional buckling of beam-column supports of field fabricated spherical pressure vessels using finite element analysis. Flexuraltorsional buckling is an important limit state that must be considered in structural steel design and it occurs when a structural member experiences significant out-of-plane bending and twisting. This research has therefore considered the total potential energy equation for the flexural-torsional buckling of a beam-column element. The energy equation was formulated by summing the strain energy and the potential energy of the external loads. The finite element method was applied in conjunction with the energy method to analyze the flexural-torsional buckling of beam-column supports. To apply the finite element method, the displacement functions are assumed to be cubic polynomials, and the shape functions used to derive the element stiffness and element geometric stiffness matrices. The element stiffness and geometric stiffness matrices were assembled to obtain the global stiffness matrices of the structure. The final finite element equation obtained was in the form of an eigenvalue problem. The flexural-torsional buckling loads of the structure were determined by solving for the eigenvalue of the equation. The resulting eigenvalue equation from the finite element analysis was coded using FORTRAN 90 programming language to aid in the analysis process. To validate FORTRAN 90 coding developed for the finite element analysis and the methodology, the results given by the software were compared to existing solutions and showed no significant difference P > 0.05.

托顶煤巷道锚固“梁-拱”结构分类及顶板冲击失稳机制

我国煤矿托顶煤巷道冲击地压频发,且冲击动载下顶板灾害尤为严重。为探究托顶煤巷道顶板锚固结构类型和冲击失稳机制,以陕西某矿301工作面回风巷道大面积冲击垮顶为工程背景,运用相似实验、理论分析及数据统计等方法,分析了托顶煤巷道围岩应力、位移和巷表加速度的动载响应特征,研究了顶煤厚度与支护构件影响下顶板锚固结构的分类特征,探究了弹性波下托顶煤巷道的应力响应机制,提出顶板锚固“梁-拱”结构的冲击失稳机制,评估了301工作面回风巷道的抗冲能力,并提出了相应的抗冲支护优化方案。结果表明:①冲击动载下托顶煤围岩应力和位移等监测数据验证了顶板存在内、外层的梁或拱形锚固结构,因顶煤厚度增加,顶板内层锚固结构存在由“梁”向“拱”的转换;②基于顶煤厚度与支护构件相对关系,将顶板锚固结构划分为薄顶煤的“叠加梁-拱”、厚顶煤的“组合梁-拱”和特厚顶煤的“组合拱”,建立了厚煤梁由“梁”向“拱”转化的临界厚度指标;③顶板锚固梁结构和锚固拱结构的冲击失稳机制为动静载荷下分别达到其拉伸、剪切强度极限后破坏,锚固“梁-拱”结构对冲击载荷的放大效应受其尺寸影响明显;④特厚顶煤的“组合拱”结构中内层拱承载强度较低,可增加锚杆长度提升内层拱厚,对应的“组合拱”结构的承载能力上升明显,与抗冲能力评估结果相符。

杭州电竞中心结构设计重难点概述

杭州电竞中心内圈主体结构采用钢框架-支撑结构,外圈采用“大倾角梭形斜柱+多段钢折梁框架”,是集承重与抗侧力于一体的结构体系,屋盖采用车辐式索承网格自平衡结构形式。详细介绍了地下结构、中央场馆结构的设计要点,门厅处利用建筑造型空间设计为多段钢折梁与跨层桁架相结合的结构形式;室内二层至三层楼面设计一浮空弧形人行桥,截面形式为薄壁钢箱梁,桥宽2.2m,跨度57m,采用“上挂下支”的稳定结构形式。对整体结构进行了静力弹性、动力弹塑性、振动台试验、典型节点有限元、整体稳定以及局部稳定等系列分析与试验。结果表明:结构在静力荷载和地震作用下强度和刚度均满足规范要求;典型节点极限承载力为荷载设计值的4.17倍;结构整体稳定性安全系数为3.79;斜柱局部稳定安全系数为2.52。合理的设计保证了结构的安全、经济和实用性。

弹性环梁支撑下圆形深基坑支护结构变形解析解

将环梁和支护结构分别视为弹性圆环和弹性圆柱薄壳,基于环梁和圆柱壳的变形协调,得到了具有任意数目弹性环梁支撑圆形深基坑支护结构变形的解析解.在验证解析解合理性和可靠性的基础上,针对某一实际圆形基坑工程,比较了在刚性和弹性环梁支撑下支护结构变形和内力的差异,并分析了支护结构底部边界条件、环梁弹性模量、尺寸和数量以及位置等参数对支护结构变形和内力分布的影响.研究结果表明:相对于刚性环梁支撑,弹性环梁支撑处内力变化较小,环梁弹性模量和尺寸的改变只对基坑挖掘面以上支护结构变形和内力影响显著,而对挖掘面以下的支护结构变形和内力几乎没有影响.该研究成果为圆形基坑支护结构设计提供了理论依据和指导.

非线性曲面梁形态优化及恒压支撑装置设计

基于超前支护设备顶梁支撑结构研究一种恒压支撑装置的设计方法,恒压支撑装置由正刚度线性弹簧、负刚度非线性平面曲梁及承压气囊组合而成。通过对巷道顶板应力场分析,得到支撑结构的边界条件;利用B样条曲线简述负刚度非线性平面曲梁的特点;基于遗传算法与非线性有限元法对负刚度非线性平面曲梁进行形态优化设计;依据恒压支撑装置的工作原理,对线性螺旋弹簧刚度/强度特性进行分析与设计;对恒压支撑装置的零部组件进行设计,实现支撑装置输出压强大小恒定及自我保护功能。恒压支撑装置设计方法为综掘巷道超前支护研制提供了有力技术支撑。

端钩型钢纤维混凝土简支梁受弯承载力试验

为改善普通钢筋混凝土梁自重大、易开裂、承载力低等缺点,在混凝土中常加入钢纤维,端钩型钢纤维,作为常见的一种高性能钢纤维得到广泛关注,中外学者针对端钩型钢纤维混凝土的基本力学性能开展了较多研究,而对端钩型钢纤维混凝土受弯构件的正截面受力性能有待深入研究。为研究端钩型钢纤维混凝土简支梁受弯性能,制作4根端钩型钢纤维混凝土梁及1根普通混凝土梁,对其进行受弯性能试验,根据试验得到的破坏形态、承载力、荷载-挠度曲线、荷载-应变曲线,分析端钩型钢纤维体积掺量对试件受弯承载力及破坏形态的影响。结果表明:端钩型钢纤维混凝土简支梁与一般混凝土简支梁受弯过程类似,均经历了弹性、开裂、带裂缝工作、破坏4个阶段;端钩型钢纤维混凝土简支梁与一般混凝土简支梁受弯过程均基本符合“平截面假定”;端钩型钢纤维限制了裂缝的产生和发展,使得纤维混凝土梁变形能力增强;与一般混凝土梁相比,端钩型钢纤维混凝土梁抗裂性及极限承载力得到提高,且构件承载力与钢纤维体积掺量基本呈现正相关;基于试验数据,对现行规范中开裂弯矩及极限承载力计算公式进行优化,开裂弯矩方面考虑对截面抵抗矩塑性影响系数进行修正,极限承载力方面引入纤维混凝土正截面承载力影响系数ζ,经修正计算值可较好吻合试验值。

结构实验综合实验平台设计

结构实验是土木工程专业一门必修的实验课程,钢筋混凝土梁的抗弯和抗剪实验是其中的一项重要内容。设计了一体支座、对中系统、垂直度校正器、上梁装置、试件加载系统,最后对实验平台承载力进行了验算。实验平台采用2种形式,一种为自平衡式,另一种为地槽固定式。该实验平台除了用于梁的抗弯实验之外还可以用于柱的抗压实验。

基于主线不停运的城轨支线独立运营改造方案

研究目的:针对大型铁路枢纽接入已运营轨道交通线路引起的既有线改造问题,为满足铁路枢纽与轨道交通连接线(支线)施工期间主线正常运营不受影响,对改造涉及的运营组织与接轨方案进行系统研究,并对土建、轨道、接触网、环网与动照、信号、综合监控与通信系统等的改造及影响进行深入研究,在统筹考虑实施难度、投资与工期的基础上,提出实施风险最小、技术最合理的改造方案。研究结论:(1)既有高架车站与区间改造影响范围较小且相对可控,可以实现主线正常运营情况下新建独立运营支线工程;(2)为最大程度保障主线运营不受影响,在现有技术水平条件下,应尽量避免在运营天窗期进行各类信号光电缆的割接;(3)支线独立运营方案,应尽量采取措施将新建支线与主线相连、轨道相通,以利于车辆检修与维保,并增加运营的灵活性;(4)桥梁浇筑与平移施工临近既有线,实施阶段应进一步完善工艺衔接与交叉施工统筹,增加既有线安全保障;(5)本研究结论可为类似工程提供参考。

基于PSO−ELM的综采工作面液压支架姿态监测方法

针对基于惯性测量单元的液压支架姿态解算方法会产生累计误差、校正结果不准确的问题,提出一种基于粒子群优化(PSO)−极限学习机(ELM)的综采工作面液压支架姿态监测方法。以液压支架顶梁俯仰角为监测对象,采用倾角传感器和陀螺仪采集液压支架顶梁支护姿态实时信息,对采集到的数据进行预处理,将处理后的数据输入PSO−ELM误差补偿模型中,得到解算误差预测值;同时通过卡尔曼滤波融合进行液压支架姿态解算,得到解算值;再用误差预测值对解算值进行误差补偿,从而求得更加准确的顶梁支护姿态数据。该方法只考虑加速度和角速度数据与解算误差的关系,不依赖具体的物理模型,可有效降低姿态解算累计误差。实验结果表明:液压支架顶梁俯仰角平均绝对误差由补偿前的1.4208°减少到0.0580°,且误差曲线具有良好的收敛性,验证了所提方法可持续稳定地监测液压支架的支护姿态。

涉水高墩现浇箱梁支撑体系的承载能力分析和方案优化

混凝土现浇梁支架虽然属于临时结构,但仍具有承载功能,而且随着桥梁工程的发展,高大支架的受力也越来越复杂,传统的结构力学手算方法已无法全面反映和权衡特殊体型、特殊部位和特殊工况的受力情况。为保证工程的顺利开展,需采用数值方法进行整体承载力计算和方案设计。该文采用Midas/Civil有限元软件,从强度、刚度、稳定性和经济性(用钢量)等方面综合评价满堂支撑、梁式支撑体系的安全性能和通用性。结果表明:(1)满堂支撑虽然施工简单,用钢量小,下部支撑杆系较多,受力均匀,变形小,最大挠度仅为2.82 mm,但是强度和稳定性不及梁式支撑,对场地要求还高。当应用于高大桥梁时,需整体进行屈曲分析,谨防结构失稳破坏;(2)梁式支撑虽然不会发生强度和失稳性破坏,对场地和地基基本没有要求。但是其用钢量高、施工难度也大,并且因跨中缺乏竖向支撑,变形有所增加。因此,在应用于“预拱度”要求较高的复杂桥梁工程中时,需进行找形分析;(3)在力学指标均达标的前提下,可以适当调整贝雷梁横向净距或下弦杆加强等措施,以获取经济性。以该文案例工程为例,贝雷梁净距由80 cm调整到100cm,可以节省约10%的用钢量。

三软煤层沿空留巷顶板结构模型及合理支护研究

为了揭示三软煤层沿空留巷围岩变形机理,探索适用于三软煤层巷道围岩控制的新技术,通过切顶沿空留巷物理相似模拟实验,研究了不切顶普通支护、切顶高强支护和切顶普通支护3种条件下顶板岩层断裂演化过程,构建了三软煤层切顶留巷顶板结构力学模型,给出了支护阻力计算方法,在韩城矿区象山煤矿进行了现场工业性试验验证。研究表明:切顶技术切断了顶板的应力传递,巷内采用高强支护,使顶板形成稳定的“短悬臂-砌体梁”结构。现场监测结果显示,不切顶普通支护的留巷顶底板平均移近量1000~1200 mm,两帮平均移近量600~700 mm;切顶高强单体支护的留巷顶底板平均移近量200~300 mm,两帮平均移近量200~300 mm;切顶组合式支架支护的留巷顶底板平均移近量50~100 mm,两帮平均移近量100~200 mm。组合式支架高强支护能够较好地控制三软煤层沿空切顶留巷围岩变形,可实现留巷二次复用无返修。

屋面花架大跨度悬挑梁板支撑架施工技术

研究了屋面花架大跨度悬挑梁板支撑架施工技术,在明确工程概况的基础上,分析了大跨度悬挑梁板支撑架施工工艺流程,强调了受力计算的重要性,并针对预留压环、“工”字钢装拆、脚手架安装、混凝土浇筑、脚手架拆除等关键环节的技术要点优化施工方案,提高施工技术应用的科学性、合理性及可靠性。

工业厂房皮带廊结构改造托梁换柱加固技术

随着城市更新的推进,针对一些大型工业建筑,不仅要满足结构受力需要,而且更需满足现代城市生活功能。针对已报废停产的工业厂房皮带廊项目,为了满足城市园区交通需求,需拔除旧厂房皮带廊项目跨中的混凝土立柱。最后采用钢托梁替代原混凝土梁的方式,改变了结构传力路径,通过ANSYS进行结构受力验算,最终提出托梁换柱的加固改造方法,现场安装临时支撑千斤顶进行结构卸载,该方法不仅满足了原设计拆除部分支撑柱的要求,同时也实现了结构原状和其历史风貌保护。