Origin of nucleation and growth of extension twins in grains unsuitably oriented for twinning during deformation of Mg-1%Al

A large number of anomalous extension twins,with low or even negative twinning Schmid factors,were found to nucleate and grow in a strongly textured Mg-1Al alloy during tensile deformation along the extruded direction.The deformation mechanisms responsible for this behaviour were investigated through in-situ electron back-scattered diffraction,grain reference orientation deviation,and slip trace-modified lattice rotation.It was found that anomalous extension twins nucleated mainly at the onset of plastic deformation at or near grain boundary triple junctions.They were associated with the severe strain incompatibility between neighbour grains as a result from the differentbasal slip-induced lattice rotations.Moreover,the anomalous twins were able to grow with the applied strain due to the continuous activation ofbasal slip in different neighbour grains,which enhanced the strain incompatibility.These results reveal the complexity of the deformation mechanisms in Mg alloys at the local level when deformed along hard orientations.

Diagnostic Study of an Extreme Explosive Cyclone over the Kuroshio/Kuroshio Extension Region

Explosive cyclones(ECs)occur frequently over the Kuroshio/Kuroshio Extension region.The most rapidly intensified EC over the Kuroshio/Kuroshio Extension region during the 42 years(1979-2020)of cold seasons(October-April)was studied to reveal the variations of the key factors at different explosive-developing stages.This EC had weak low-level baroclinicity,mid-level cyclonic-vorticity advection,and strong low-level water vapor convergence at the initial explosive-developing stage.The low-level baroclinicity and mid-level cyclonic-vorticity advection increased substantially during the maximum-deepening-rate stage.The diagnostic analyses using the Zwack-Okossi equation showed that diabatic heating was the main contributor to the initial rapid intensification of this EC.The cyclonic-vorticity advection and warm-air advection enhanced rapidly in the middle and upper troposphere and contributed to the maximum rapid intensification,whereas the diabatic heating weakened slightly in the mid-low troposphere.The relative contribution of the diabatic heating decreased from the initial explosive-developing stage to the maximum-deepening-rate stage due to the enhancement of other factors(the cyclonic-vorticity advection and warm-air advection).Furthermore,the physical factors contributing to this EC varied with the explosive-developing stage.The non-key factors at the initial explosive-developing stage need attention to forecast the rapid intensification.

A Multi-Stage Differential-Multifactorial Evolutionary Algorithm for Ingredient Optimization in the Copper Industry

Ingredient optimization plays a pivotal role in the copper industry,for which it is closely related to the concentrate utilization rate,stability of furnace conditions,and the quality of copper production.To acquire a practical ingredient plan,which should exhibit long duration time with sufficient utilization and feeding stability for real applications,an ingredient plan optimization model is proposed in this study to effectively guarantee continuous production and stable furnace conditions.To address the complex challenges posed by this integer programming model,including multiple coupling feeding stages,intricate constraints,and significant non-linearity,a multi-stage differential-multifactorial evolution algorithm is developed.In the proposed algorithm,the differential evolutionary(DE)algorithm is improved in three aspects to efficiently tackle challenges when optimizing the proposed model.First,unlike traditional time-consuming serial approaches,the multifactorial evolutionary algorithm is utilized to optimize multiple complex models contained in the population of evolutionary algorithm caused by the feeding stability in a parallel manner.Second,a repair algorithm is employed to adjust infeasible ingredient lists in a timely manner.In addition,a local search strategy taking feedback from the current optima and considering the different positions of global optimum is developed to avoiding premature convergence of the differential evolutionary algorithm.Finally,the simulation experiments considering different planning horizons using real data from the copper industry in China are conducted,which demonstrates the superiority of the proposed method on feeding duration and stability compared with other commonly deployed approaches.It is practically helpful for reducing material cost as well as increasing production profit for the copper industry.

Multi-Stage Multidisciplinary Design Optimization Method for Enhancing Complete Artillery Internal Ballistic Firing Performance

To enhance the comprehensive performance of artillery internal ballistics—encompassing power,accuracy,and service life—this study proposed a multi-stage multidisciplinary design optimization(MS-MDO)method.First,the comprehensive artillery internal ballistic dynamics(AIBD)model,based on propellant combustion,rotation band engraving,projectile axial motion,and rifling wear models,was established and validated.This model was systematically decomposed into subsystems from a system engineering perspective.The study then detailed the MS-MDO methodology,which included Stage I(MDO stage)employing an improved collaborative optimization method for consistent design variables,and Stage II(Performance Optimization)focusing on the independent optimization of local design variables and performance metrics.The methodology was applied to the AIBD problem.Results demonstrated that the MS-MDO method in Stage I effectively reduced iteration and evaluation counts,thereby accelerating system-level convergence.Meanwhile,Stage II optimization markedly enhanced overall performance.These comprehensive evaluation results affirmed the effectiveness of the MS-MDO method.

Research on Regulation Method of Energy Storage System Based on Multi-Stage Robust Optimization

To address the scheduling problem involving energy storage systems and uncertain energy,we propose a method based on multi-stage robust optimization.This approach aims to regulate the energy storage system by using a multi-stage robust optimal control method,which helps overcome the limitations of traditional methods in terms of time scale.The goal is to effectively utilize the energy storage power station system to address issues caused by unpredictable variations in environmental energy and fluctuating load throughout the day.To achieve this,a mathematical model is constructed to represent uncertain energy sources such as photovoltaic and wind power.The generalized Benders Decomposition method is then employed to solve the multi-stage objective optimization problem.By decomposing the problem into a series of sub-objectives,the system scale is effectively reduced,and the algorithm’s convergence ability is improved.Compared with other algorithms,the multi-stage robust optimization model has better economy and convergence ability and can be used to guide the power dispatching of uncertain energy and energy storage systems.

Estimation of Displacement and Extension due to Reverse Drag of Normal Faults: Forward Method

In the case of reverse drag of normal faulting, the displacement and horizontal extension are determined based on the established equations for the three mechanisms: rigid body, vertical shear and inclined shear. There are three sub-cases of basal detachment for the rigid body model: horizontal detachment, antithetic detachment and synthetic detachment. For the rigid body model, the established equations indicate that the total displacement on the synthetic base (Dt2) is the largest, that on the horizontal base (Dt1) is moderate, and that on the antithetic base (Dt3) is the smallest. On the other hand, the value of (Dt1) is larger than the displacement for the vertical shear (Dt4). The value of (Dt1) is larger than or less than the displacement for the inclined shear (Dt5) depending on the original fault dip δ0, bedding angle θ, and the angle of shear direction β. For all original parameters, the value of Dt5 is less than the value of Dt4. Also, by comparing three rotation mechanisms, we find that the inclined shear produces largest extension, the rigid body model with horizontal detachment produces the smallest extension, and the vertical shear model produces moderate extension.

Analysis of the Digital Skill Gap of Agricultural Extension Personnel in South-East, Nigeria

The study analysed the digital skill gap of agricultural extension personnel on the use of digital technologies for extension services delivery in South-East, Nigeria. The specific objectives were to describe the socioeconomic characteristics of agricultural extension personnel in South-East Nigeria and identify the digital skill gaps among agricultural extension personnel in the area of study. Purposive sampling technique was used to select 364 Agricultural Extension personnel for the study. Data were collected through the use of structured questionnaire and were analysed using simple descriptive statistical tools such as percentages, mean score, and standard deviation. Findings indicated that most of the personnel were male (57.8%), within the age bracket of 38 - 47 years (62.9%), had B.Sc./HND as their highest educational qualification (74.7%), married (86.3%), and had a household size of 6 - 10 Persons (57.7%). It was further revealed that the majority (70.1%) were members of professional organization, earned a monthly income of N50,001.00 - N100,000.00 (65.7%), had a work experience of 11 - 15 years (51.1%), and owned a smartphone/ iPad/laptop (91.5%). Findings further indicated that they had moderate skill gap in Basic Computer skills (Mean = 4.32), and digital communication and collaboration skills (Mean = 4.26). Findings also showed that they had a high skill gap in digital technical skills (Mean = 2.46), digital data analysis skills (Mean = 2.09), digital content creation skills (Mean = 2.43), digital ethical skills (Mean = 2.79), multimedia production skills (Mean = 2.81), and video library management skills (Mean = 2.39). The study concluded that though there exists a high digital skill gap among agricultural extension personnel in South-East, Nigeria, their socioeconomic characteristics are capable of supporting the implementation of digital extension services in the area. The study recommended that the management of Agricultural Development Programs in South-East, Nigeria, should provide digital training for extension personnel to close the digital skill gap that currently exists among the personnel.

Comparative Study of the Socioeconomic Characteristics and Digital Literacy Level of Agricultural Extension Personnel in Imo and Ebonyi States, South-East, Nigeria

The study comparatively analysed the socioeconomic characteristics and digital literacy level of Agricultural Extension personnel (AEP) in Ebonyi and Imo States, South-East, Nigeria. The specific objectives were to describe the socioeconomic characteristics of agricultural extension personnel in Ebonyi and Imo States, and to ascertain the digital literacy level of AEP in the studied states. Purposive sampling technique was used to select 312 Agricultural Extension personnel (132 from Ebonyi State Agricultural Development Program and 180 from Imo State Agricultural Development Program) for the study. Data were collected through the use of validated and structured questionnaire, and administered through the help of well-trained enumerators. Data were analysed using simple descriptive statistical tools such as percentages mean score, standard deviation and weighted mean. Findings indicated that they were more male in the both States (55.3% and 57.8%) for Ebonyi and Imo State respectively and that the average age of AEP in Ebonyi and Imo States were 44.7 years and 49.2 years respectively. It was further revealed that the majority (77.3% and 82.8%) had B.Sc./HND as their highest academic qualifications, belonged to professional organisations (62.1% and 75%), and were earning an average monthly income of N58,798 and N62,648 for Ebonyi and Imo State respectively. Also, it was revealed that their mean years of service were 12.4 years and 13.4 years for Ebonyi and Imo State respectively. Almost all of them (87.9% and 95.0%) own a smartphone, had access to the internet (80.3% and 90.0%), but do not own a laptop/ipad (82.6% and 72.8%) for Ebon-yi and Imo State respectively. Results further revealed that Agricultural extension personnel in both Ebonyi and Imo State respectively had low digital literacy level ( = 2.41 and 2.32). The study concluded that AEP in Ebonyi and Imo State respectively had similar socioeconomic characteristics and low level of digital literacy. The study recommended that the management of ADPs in both Ebonyi and Imo State should ensure the training of AEP in digital skills to enhance their digital literacy level to enable them use digital technologies in their work.

Wellbore Cleaning Degree and Hydraulic Extension in Shale Oil Horizontal Wells

The efficient development and exploitation of shale oil depends on long-distance horizontal wells. As the degreeof cleaning of the wellbore plays a key role in these processes, in this study, this problem is investigated experimentallyby focusing on the dimensionless cuttings bed height. A method is proposed to calculate the horizontalwellhydraulic extension taking into account the influence of the wellbore cleaning degree on the wellborepressure distribution and assess the effect of a variety of factors such as the bottom hole pressure, the circulatingpressure drop, the drilling pump performance and the formation properties. The analysis shows that the hydraulicextension of horizontal wells decreases with an increase in the cuttings bed height, and the higher the displacementof drilling fluid, the faster the hydraulic extension declines. The annular pressure drop of the horizontalsection increases with the increase of the cuttings bed height, resulting in a higher bottom-hole pressure. Severalarguments are provided to guide the safe drilling of shale oil horizontal wells and overcome the limits of currenttechnological approaches.

Robust high frequency seismic bandwidth extension with a deep neural network trained using synthetic data

Geophysicists interpreting seismic reflection data aim for the highest resolution possible as this facilitates the interpretation and discrimination of subtle geological features.Various deterministic methods based on Wiener filtering exist to increase the temporal frequency bandwidth and compress the seismic wavelet in a process called spectral shaping.Auto-encoder neural networks with convolutional layers have been applied to this problem,with encouraging results,but the problem of generalization to unseen data remains.Most published works have used supervised learning with training data constructed from field seismic data or synthetic seismic data generated based on measured well logs or based on seismic wavefield modelling.This leads to satisfactory results on datasets similar to the training data but requires re-training of the networks for unseen data with different characteristics.In this work seek to improve the generalization,not by experimenting with network architecture(we use a conventional U-net with some small modifications),but by adopting a different approach to creating the training data for the supervised learning process.Although the network is important,at this stage of development we see more improvement in prediction results by altering the design of the training data than by architectural changes.The approach we take is to create synthetic training data consisting of simple geometric shapes convolved with a seismic wavelet.We created a very diverse training dataset consisting of 9000 seismic images with between 5 and 300 seismic events resembling seismic reflections that have geophysically motived perturbations in terms of shape and character.The 2D U-net we have trained can boost robustly and recursively the dominant frequency by 50%.We demonstrate this on unseen field data with different bandwidths and signal-to-noise ratios.Additionally,this 2D U-net can handle non-stationary wavelets and overlapping events of different bandwidth without creating excessive ringing.It is also robust in the presence of noise.The significance of this result is that it simplifies the effort of bandwidth extension and demonstrates the usefulness of auto-encoder neural network for geophysical data processing.

The Effects of Infrastructure Projects on House Prices and Rents:Evidence from the HS2 Extension Cancellation in the UK

This paper uses the HS2 extension cancellation in November 2021 as a quasi-experiment to study its impact on house prices and rents in Leeds.Using a DiD approach on repeat sales and monthly rents,I compare property values near the HS2 station and proposed construction site before and after the announcement.Results show a 3.6%decrease in house prices and a 3.9%decline in rents near the station,while properties near the construction site experienced a 2.4%increase in prices and a 2.1%rise in rents.This is the first paper to analyse the HS2 cancellation effect using panel data methods.

SWAT和WetSpa Extension在罗玉沟流域的应用比较

近年来,运用水文模型来研究流域水文状况越来越普遍,本文以黄土高原丘陵沟壑区第三副区的典型小流域为例,基于SWAT和WetSpa Extension两个模型,从模型的输入数据、模型的参数和模型模拟结果等方面进行比较,以期为该区水沙模拟选择合适水文模型并为将来模型性能的改进提供参考。连续15年的校准验证表明:两个模型都能得到较好的结果,而SWAT模型能应用于水文及泥沙等模拟过程,相对来说功能更全面;WetSpa Extension模型目前仅能提供水文模拟的模块,优点在于模拟时间步长较任意,可进行洪水模拟。

基于Multi-Stage DEA模型的中国细羊毛生产技术效率实证分析

以内蒙古等4省区为例，采用基于规模报酬可变假设的产出主导型Muhi-StageDEA模型，对2001～2010年中国细羊毛生产技术效率进行了测算和分析。研究结果表明，中国细羊毛生产技术效率不高，存在显著的技术效率损失；细羊毛生产在总体上出现了纯技术效率下降和规模效率提高并存的现象，2008年以来纯技术效率提高对细羊毛生产技术效率改善的促进作用逐渐增强，而细羊毛生产规模效率则呈现出了一定的下降趋势；各省区细羊毛生产技术效率存在较大差异，细羊毛生产的规模效率均要高于纯技术效率，规模效率仍是影响各省区细羊毛生产技术效率改善和提高的主要因素。最后提出改善和提高中国细羊毛生产技术效率的政策建议。

Triangular Au-Ag framework nanostructures prepared by multi-stage replacement and their spectral properties

Triangular Au-Ag framework nanostructures （TFN） were synthesized via a multi-step galvanic replacement reaction （MGRR） of single-crystalline triangular silver nanoplates in a chlorauric acid （HAuCl4） solution at room temperature. The morphological, compositional, and crystal structural changes involved with reaction steps were analyzed by using transmission electron microscopy（TEM）, energy-dispersive X-ray spectrometry （EDX）, and X-ray diffraction. TEM combined with EDX and selected area electron diffraction confirmed the replacement of Ag with Au. The in-plane dipolar surface plasmon resonance （SPR） absorption band of the Ag nanoplates locating initially at around 700 nm gradually redshifted to 1 100 nm via a multi-stage replacement manner after 7 stages. The adding amount of HAuCl4 per stage influenced the average redshift value per stage, thus enabled a fine tuning of the in-plane dipolar band. A proposed formation mechanism of the original Ag nanoplates developing pores while growing Au nanoparticles covering this underlying structure at more reaction steps was confirmed by exploiting surface-enhanced Raman scattering （SERS）.

Research on the extension of Tamarix shrubs resulted from devel-opment projects in arid area

Tamarix plant is widely distributed in the arid areas of China for its great tolerance of draught, salt and alkali and attracts more attention by its strong capacity in windbreak and sand-fixations. “Tamarix dunes” constitute special desert bio-landscape in arid area. During last several decades,Tamarix shrubs declined and “Tamarix dunes” were also severely destroyed due to the land exploitation and serious deforestation, etc. From the 1980s until now, the extending phenomenon ofTamarix shrubs caused by developmental projects such as building highway, railway was studied in the western dry area of China, including western section of Hexi Corridor of Gansu, railroads and highways around the two greatest basin in Xinjiang and interior regions in Gurbantonggut desert, through on-the-spot survey along the transportation lines and setting up sampling plots along the roads. It was found that large quantities ofTamarix plants grow in the catchment area of low-lying lands that were formed by bulldozer operation during road building period. The extension ofTamarix shrubs caused by engineering was similar to that of the other section of the area to some extent, but went beyond the original distribution. This extension is beneficial to the ecological restoration and re-vegetation of western region of China and plays an important role in control of the sandstorms and improvement of ecological environments. As a result, it is necessary to make a further study on the extending phenomenon ofTamarix shrubs and to seek approach to promote wider extension ofTamarix shrubs in suitable habitats. Key words Arid area - Tamarix - Development engineering - Vegetation extension CLC number S718.541 Document code A Article ID 1007-662X(2004)01-0045-04 Foundation Item: This study is supported by key projects of National Natural Science Foundation (39730100), National Foundation (30070640) and part of Project 973(G19990435).Biography: Huang Pei-You (1936-), Male, Professor in College of Life Science and Technology, Xinjiang University, Urumqi, 830046Responsible editor: Chai Ruihai

Site-directed Mutagenesis Based on Overlap Extension PCR

[Objective] To establish an efficient, convenient and economical method for site-directed mutagenesis. [Method] The target mutation was introduced into primers designed by DNAMAN5.0 software. Through overlap extension PCR for twice obtained the mutation gene which of the full length of the recombinant Human Tissue type plasminogen activator （Reteplase）. The mutation gene cloned it into pEASY- blunt simple cloning vector for sequencing. [Result] The sequencing results showed that three site mutations were fully consistent with the expected results （10~ site had been added a base-pair of A, C had been changed into G at 137~ site, G had been changed into A at 686~ site）.Three site mutations were introduced by using overlap extension PCR on one-step. The overall rate of obtaining the mutant sites was 100%. Site-directed mutagenesis will clone the recombinant Human Tissue type plas- minogen activator and laid the basis for the functional study. [Conclusion] Site-directed mutagenesis was successfully implemented based on the overlap extension PCR which is an efficient, convenient and economical DNA-directed mutagenesis method.

Extension Study on the Use of Slope Farmland in West Region

Based on the research of slope farmland in northern Shaanxi,the extension decision model was set up by the original theory of extenics. The optimal solution is obtained by expanding analysis,provide scientific basis for decision-making and increase the economic benefits to farmers.

岩石圈伸展的壳/幔拆离模型(Parallel Extension Tectonics):华北克拉通东部早白垩世岩石圈减薄与破坏机理

华北克拉通岩石圈减薄和破坏机理长期以来存在争议,基于岩石学、岩石地球的化学分析研究突出强调深部过程的重要性。前人提出了两种重要模式:包括以拆沉作用为代表的top-down tectonics模型和以热-机械侵蚀与化学侵蚀,或地幔置换、交代作用的bottom-up tectonics模型。然而,对于这两种模式而言尚存在许多无法合理解释的问题,比如在此深部过程中,区域性岩石圈伸展有多大的贡献?地壳伸展构造是作为深部过程的响应,还是同为岩石圈伸展的产物?本文基于早白垩世东亚地区(尤其是华北克拉通东部地区)伸展构造与岩浆活动的综合分析,揭示出华北克拉通东部不同地区伸展构造变形与岩浆活动之间的时、空和成因关系有一定的差异。但整体上看,岩石圈伸展起着主导作用,控制着岩浆上侵和就位,在拆离断层下盘侵入形成各种规模的花岗质为主的侵入体,或于上盘喷发形成火山-沉积岩盆地。在伸展构造发育的不同阶段,可以有伸展早期、伸展期及伸展期后的岩浆活动。岩浆活动的强度及岩浆源区特点有显著的时空变化。一方面,在同一地区不同演化阶段其源区有很大的差异。表现为主体上是早期以古老下地壳源为主,随着壳/幔伸展作用演化,逐渐向混合源或独立幔源的演化。同时,不同地区岩浆源区的变化规律也显著不同。以胶辽地区为例,胶东整体上是壳幔混合源区对于岩浆演化有重要贡献;而辽东地区具有显著的源区演化特点:从剪切早期古老下地壳源区为主,并伴有幔源物质加入,剪切期古老下地壳为主,到剪切晚期和剪切期后以新生下地壳为主。本文认为岩石圈伸展的壳/幔拆离模型(Parallel Extension Tectonics),可以合理地解释华北克拉通及邻区早白垩世构造-岩浆活动性。在该模型中,遭受伸展的华北克拉通岩石圈发生壳-幔拆离作用。在岩石圈伸展作用期间,地壳层次的拆离作用与岩石圈地幔层次上的拆离作用可以是耦合的或者是解耦的,从而导致华北克拉通岩石圈减薄过程中在地壳尺度上的拆离作用与变质核杂岩的剥露有三种不同的类型:同岩浆活动型伸展(C型:Co-magmatism mode extension)、无岩浆活动型伸展(A型:Amagmatism mode extension)和多阶段混合型(M型:Multi-mode extension)。

Extension集合辨析

xtension集合是可拓学理论的基础概念之一 .探讨Extension集合的特色和它与其它集合的关系 ,对于明晰可拓学的生存基础、研究价值和发展前景非常重要 .通过比较 3种集合对论域元素的识别与分类原则 ,指出Fuzzy集合Extension集合均以Cantor集合为基础 ,但各自又具有其它集合不可替代的独特之处 .Extension集合的特色在于它对论域元素潜在属性的识别角度和元素属性在特定变换下的可转换性的识别功能 .

Primer Extension-DHPLC检测线粒体DNA 12SrRNA常见耳聋相关突变方法的建立~△

目的建立针对线粒体DNA 12SrRNA基因常见耳聋相关突变的Primer Extension-DHPLC(PE-DHPLC)基因诊断新方法。方法将包含线粒体DNA 12SrRNA 961insC、T1095C、C1494T、A1555G 4种不同突变的4例外周血DNA样本和4例正常对照标本经测序验证,PCR扩增靶序列,设计延伸引物,延伸后得到线粒体DNA 12SrRNA基因961insC、T1095C、C1494T、A1555G 4个常见突变的特异性延伸片段,用全变性高效液相色谱分析延伸片段混合物,分离图谱鉴定被检样本的基因型。结果 4例包含线粒体DNA 12SrRNA基因4种耳聋相关突变的DNA样本均扩增出包含4种突变的975 bp特征性条带,PE-DHPLC检测结果显示突变者有引物峰和突变峰两个峰,完全可以鉴别出4种突变,而4例正常对照标本仅显示单个引物峰。结论本实验建立了Primer Extension-DHPLC的线粒体相关耳聋突变分析新方法,可用于耳聋的基因诊断。