Assembly geometric error as a part of the machine tool system errors has a significant influence on the machining accuracy of the multi-axis machine tool.And it cannot be eliminated due to the error propagation of com...Assembly geometric error as a part of the machine tool system errors has a significant influence on the machining accuracy of the multi-axis machine tool.And it cannot be eliminated due to the error propagation of components in the assembly process,which is generally non-uniformly distributed in the whole working space.A comprehensive expression model for assembly geometric error is greatly helpful for machining quality control of machine tools to meet the demand for machining accuracy in practice.However,the expression ranges based on the standard quasistatic expression model for assembly geometric errors are far less than those needed in the whole working space of the multi-axis machine tool.To address this issue,a modeling methodology based on the Jacobian-Torsor model is proposed to describe the spatially distributed geometric errors.Firstly,an improved kinematic Jacobian-Torsor model is developed to describe the relative movements such as translation and rotation motion between assembly bodies,respectively.Furthermore,based on the proposed kinematic Jacobian-Torsor model,a spatial expression of geometric errors for the multi-axis machine tool is given.And simulation and experimental verification are taken with the investigation of the spatial distribution of geometric errors on five four-axis machine tools.The results validate the effectiveness of the proposed kinematic Jacobian-Torsor model in dealing with the spatial expression of assembly geometric errors.展开更多
This study explored the concurrent scheduling of machines, tools, and tool transporter(TT) with alternative machines in a multi-machine flexible manufacturing system(FMS), taking into mind the tool transfer durations ...This study explored the concurrent scheduling of machines, tools, and tool transporter(TT) with alternative machines in a multi-machine flexible manufacturing system(FMS), taking into mind the tool transfer durations for minimization of the makespan(MSN). When tools are expensive, just a single copy of every tool kind is made available for use in the FMS system. Because the tools are housed in a central tool magazine(CTM), which then distributes and delivers them to many machines, because there is no longer a need to duplicate the tools in each machine, the associated costs are avoided. Choosing alternative machines for job operations(jb-ons), assigning tools to jb-ons, sequencing jb-ons on machines, and arranging allied trip activities, together with the TT’s loaded trip times and deadheading periods, are all challenges that must be overcome to achieve the goal of minimizing MSN. In addition to a mixed nonlinear integer programming(MNLIP) formulation for this simultaneous scheduling problem, this paper suggests a symbiotic organisms search algorithm(SOSA) for the problem’s solution. This algorithm relies on organisms’ symbiotic interaction strategies to keep living in an ecosystem. The findings demonstrate that SOSA is superior to the Jaya algorithm in providing solutions and that using alternative machines for operations helps bring down MSN.展开更多
The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negativ...The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.展开更多
Feedrate fluctuation caused by approximation errors of interpolation methods has great effects on machining quality in NURBS interpolation, but few methods can efficiently eliminate or reduce it to a satisfying level ...Feedrate fluctuation caused by approximation errors of interpolation methods has great effects on machining quality in NURBS interpolation, but few methods can efficiently eliminate or reduce it to a satisfying level without sacrificing the computing efficiency at present. In order to solve this problem, a high accurate interpolation method for NURBS tool path is proposed. The proposed method can efficiently reduce the feedrate fluctuation by forming a quartic equation with respect to the curve parameter increment, which can be efficiently solved by analytic methods in real-time. Theoretically, the proposed method can totally eliminate the feedrate fluctuation for any 2nd degree NURBS curves and can interpolate 3rd degree NURBS curves with minimal feedrate fluctuation.Moreover, a smooth feedrate planning algorithm is also proposed to generate smooth tool motion with considering multiple constraints and scheduling errors by an efficient planning strategy. Experiments are conducted to verify the feasibility and applicability of the proposed method. This research presents a novel NURBS interpolation method with not only high accuracy but also satisfying computing efficiency.展开更多
With the development of modern information technology-and particularly of the new generation of artificial intelligence(AI)technology-new opportunities are available for the development of the intelligent machine tool...With the development of modern information technology-and particularly of the new generation of artificial intelligence(AI)technology-new opportunities are available for the development of the intelligent machine tool(IMT).Based on the three classical paradigms of intelligent manufacturing as defined by the Chinese Academy of Engineering,the concept,characteristics,and systemic structure of the IMT are presented in this paper.Three stages of machine tool evolution-from the manually operated machine tool(MOMT)to the IMT-are discussed,including the numerical control machine tool(NCMT),the smart machine tool(SMT),and the IMT.Furthermore,the four intelligent control principles of the IMT-namely,autonomous sensing and connection,autonomous learning and modeling,autonomous optimization and decision-making,and autonomous control and execution-are presented in detail.This paper then points out that the essential characteristic of the IMT is to acquire and accumulate knowledge through learning,and presents original key enabling technologies,including the instruction-domain-based analytical approach,theoretical and big-data-based hybrid modeling technology,and the double-code control method.Based on this research,an intelligent numerical control(INC)system and industrial prototypes of IMTs are developed.Three intelligent practices are conducted,demonstrating that the integration of the new generation of AI technology with advanced manufacturing technology is a feasible and convenient way to advance machine tools toward the IMT.展开更多
The research on the parameters optimization for gasbag polishing machine tools, mainly aims at a better kinematics performance and a design scheme. Serial structural arm is mostly employed in gasbag polishing machine ...The research on the parameters optimization for gasbag polishing machine tools, mainly aims at a better kinematics performance and a design scheme. Serial structural arm is mostly employed in gasbag polishing machine tools at present, but it is disadvantaged by its complexity, big inertia, and so on. In the multi-objective parameters optimization, it is very difficult to select good parameters to achieve excellent performance of the mechanism. In this paper, a statistics parameters optimization method based on index atlases is presented for a novel 5-DOF gasbag polishing machine tool. In the position analyses, the structure and workspace for a novel 5-DOF gasbag polishing machine tool is developed, where the gasbag polishing machine tool is advantaged by its simple structure, lower inertia and bigger workspace. In the kinematics analyses, several kinematics performance evaluation indices of the machine tool are proposed and discussed, and the global kinematics performance evaluation atlases are given. In the parameters optimization process, considering the assembly technique, a design scheme of the 5-DOF gasbag polishing machine tool is given to own better kinematics performance based on the proposed statistics parameters optimization method, and the global linear isotropic performance index is 0.5, the global rotational isotropic performance index is 0.5, the global linear velocity transmission performance index is 1.012 3 m/s in the case of unit input matrix, the global rotational velocity transmission performance index is 0.102 7 rad/s in the case of unit input matrix, and the workspace volume is 1. The proposed research provides the basis for applications of the novel 5-DOF gasbag polishing machine tool, which can be applied to the modern industrial fields requiring machines with lower inertia, better kinematics transmission performance and better technological efficiency.展开更多
Ultra-precision machine tool is the most important physical tool to machining the workpiece with the frequency domain error requirement, in the design process of which the dynamic accuracy design(DAD) is indispensable...Ultra-precision machine tool is the most important physical tool to machining the workpiece with the frequency domain error requirement, in the design process of which the dynamic accuracy design(DAD) is indispensable and the related research is rarely available. In light of above reasons, a DAD method of ultra-precision machine tool is proposed in this paper, which is based on the frequency domain error allocation.The basic procedure and enabling knowledge of the DAD method is introduced. The application case of DAD method in the ultra-precision flycutting machine tool for KDP crystal machining is described to show the procedure detailedly. In this case, the KDP workpiece surface has the requirements in four different spatial frequency bands, and the emphasis for this study is put on the middle-frequency band with the PSD specifications. The results of the application case basically show the feasibility of the proposed DAD method. The DAD method of ultra-precision machine tool can effectively minimize the technical risk and improve the machining reliability of the designed machine tool. This paper will play an important role in the design and manufacture of new ultra-precision machine tool.展开更多
Brittle materials are widely used for producing important components in the industry of optics,optoelectronics,and semiconductors.Ultraprecision machining of brittle materials with high surface quality and surface int...Brittle materials are widely used for producing important components in the industry of optics,optoelectronics,and semiconductors.Ultraprecision machining of brittle materials with high surface quality and surface integrity helps improve the functional performance and lifespan of the components.According to their hardness,brittle materials can be roughly divided into hard-brittle and soft-brittle.Although there have been some literature reviews for ultraprecision machining of hard-brittle materials,up to date,very few review papers are available that focus on the processing of soft-brittle materials.Due to the‘soft’and‘brittle’properties,this group of materials has unique machining characteristics.This paper presents a comprehensive overview of recent advances in ultraprecision machining of soft-brittle materials.Critical aspects of machining mechanisms,such as chip formation,surface topography,and subsurface damage for different machining methods,including diamond turning,micro end milling,ultraprecision grinding,and micro/nano burnishing,are compared in terms of tool-workpiece interaction.The effects of tool geometries on the machining characteristics of soft-brittle materials are systematically analyzed,and dominating factors are sorted out.Problems and challenges in the engineering applications are identified,and solutions/guidelines for future R&D are provided.展开更多
The methods of identifying geometric error parameters for NC machine tools are introduced. According to analyzing and comparing the different methods, a new method-displacement method with 9 lines is developed based o...The methods of identifying geometric error parameters for NC machine tools are introduced. According to analyzing and comparing the different methods, a new method-displacement method with 9 lines is developed based on the theories of the movement errors of multibody system (MBS). A lot of experiments are also made to obtain 21 terms geometric error parameters by using the error identification software based on the new method.展开更多
The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,f...The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.展开更多
In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-wa...In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si4N3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.展开更多
A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus...A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus, the zero-failure data form and corresponding Bayesian model are developed to solve the zero-failure problem of NCMTs, for which no previous suitable statistical model has been developed. An expert-judgment process that incorporates prior information is presented to solve the difficulty in obtaining reliable prior distributions of Weibull parameters. The equations for the posterior distribution of the parameter vector and the Markov chain Monte Carlo(MCMC) algorithm are derived to solve the difficulty of calculating high-dimensional integration and to obtain parameter estimators. The proposed method is applied to a real case; a corresponding programming code and trick are developed to implement an MCMC simulation in Win BUGS, and a mean time between failures(MTBF) of 1057.9 h is obtained. Given its ability to combine expert judgment, prior information, and data, the proposed reliability modeling and assessment method under the zero failure of NCMTs is validated.展开更多
Model parameters estimation is a pivotal issue for runoff modeling in ungauged catchments.The nonlinear relationship between model parameters and catchment descriptors is a major obstacle for parameter regionalization...Model parameters estimation is a pivotal issue for runoff modeling in ungauged catchments.The nonlinear relationship between model parameters and catchment descriptors is a major obstacle for parameter regionalization,which is the most widely used approach.Runoff modeling was studied in 38 catchments located in the Yellow–Huai–Hai River Basin(YHHRB).The values of the Nash–Sutcliffe efficiency coefficient(NSE),coefficient of determination(R2),and percent bias(PBIAS)indicated the acceptable performance of the soil and water assessment tool(SWAT)model in the YHHRB.Nine descriptors belonging to the categories of climate,soil,vegetation,and topography were used to express the catchment characteristics related to the hydrological processes.The quantitative relationships between the parameters of the SWAT model and the catchment descriptors were analyzed by six regression-based models,including linear regression(LR)equations,support vector regression(SVR),random forest(RF),k-nearest neighbor(kNN),decision tree(DT),and radial basis function(RBF).Each of the 38 catchments was assumed to be an ungauged catchment in turn.Then,the parameters in each target catchment were estimated by the constructed regression models based on the remaining 37 donor catchments.Furthermore,the similaritybased regionalization scheme was used for comparison with the regression-based approach.The results indicated that the runoff with the highest accuracy was modeled by the SVR-based scheme in ungauged catchments.Compared with the traditional LR-based approach,the accuracy of the runoff modeling in ungauged catchments was improved by the machine learning algorithms because of the outstanding capability to deal with nonlinear relationships.The performances of different approaches were similar in humid regions,while the advantages of the machine learning techniques were more evident in arid regions.When the study area contained nested catchments,the best result was calculated with the similarity-based parameter regionalization scheme because of the high catchment density and short spatial distance.The new findings could improve flood forecasting and water resources planning in regions that lack observed data.展开更多
The objective of this study was to develop an online tool-wear-measurement scheme for small diameter end-mills based on machine vision to increase tool life and the production efficiency. The geometrical features of w...The objective of this study was to develop an online tool-wear-measurement scheme for small diameter end-mills based on machine vision to increase tool life and the production efficiency. The geometrical features of wear zone of each end mill were analyzed, and three tool wear criterions of small-diameter end mills were defined. With the uEye camera, macro lens and 3-axis micro milling machine, it was proved the feasibility of measuring flank wear with the milling tests on a 45# steel workpiece. The design of experiment (DOE) showed that Vc was the most remarkable effect factor for the flank wear of small-diameter end mill. The wear curve of the experiments of milling was very similar to the Taylor curve.展开更多
Adaptable design aims to extend the utilities of design and product.The specific methods are developed for practical applications of adaptable design in the design of mechanical structures, including adaptable platfor...Adaptable design aims to extend the utilities of design and product.The specific methods are developed for practical applications of adaptable design in the design of mechanical structures, including adaptable platform,interface and module designs.Adaptable redesign problems are formulated as adaptable platform design under adaptability bound constraints.Analysis tools are then suggested for the implementation of the redesign of machine tool structures,including variation techniques based sensitivity analysis,similarity-based commonality analysis,performance improvement,and adaptability measures.The specific measure of adaptability for machine tool structures is measured through the quantification of the structural similarity and performance improvement gained from adaptable design.The method provides designers with an approach that brings adaptability into the design process,with considering the cost and benefits of such adaptability. The redesign of CNC spiral bevel gear cutting machine structures has been included to illustrate these concepts and methods.展开更多
Machine tool thermal error is an important reason for poor machining accuracy.Thermal error compensation is a primary technology in accuracy control.To build thermal error model,temperature variables are needed to be ...Machine tool thermal error is an important reason for poor machining accuracy.Thermal error compensation is a primary technology in accuracy control.To build thermal error model,temperature variables are needed to be divided into several groups on an appropriate threshold.Currently,group threshold value is mainly determined by researchers experience.Few studies focus on group threshold in temperature variable grouping.Since the threshold is important in error compensation,this paper arms to find out an optimal threshold to realize temperature variable optimization in thermal error modeling.Firstly,correlation coefficient is used to express membership grade of temperature variables,and the theory of fuzzy transitive closure is applied to obtain relational matrix of temperature variables.Concepts as compact degree and separable degree are introduced.Then evaluation model of temperature variable clustering is built.The optimal threshold and the best temperature variable clustering can be obtained by setting the maximum value of evaluation model as the objective.Finally,correlation coefficients between temperature variables and thermal error are calculated in order to find out optimum temperature variables for thermal error modeling.An experiment is conducted on a precise horizontal machining center.In experiment,three displacement sensors are used to measure spindle thermal error and twenty-nine temperature sensors are utilized to detect the machining center temperature.Experimental result shows that the new method of temperature variable optimization on optimal threshold successfully worked out a best threshold value interval and chose seven temperature variables from twenty-nine temperature measuring points.The model residual of z direction is within 3 m.Obviously,the proposed new variable optimization method has simple computing process and good modeling accuracy,which is quite fit for thermal error compensation.展开更多
The grouping and optimization approach to identify the key thermal points on machine tools is studied.To solve the difficulty in grouping because of the high correlated variables from distinct groups,the variables gro...The grouping and optimization approach to identify the key thermal points on machine tools is studied.To solve the difficulty in grouping because of the high correlated variables from distinct groups,the variables grouping technique is improved.Temperature variables are sorted according to their relativities with the thermal errors.The representative temperature variables are determined by analyzing the variable correlation in sort order and removing the other variables in the same group.Considering the diverse effect of importing the different variables on thermal error model,the method of variable combination optimization is improved.Regression models made up of different combination of representative temperature variables are evaluated by the index of both the determined coefficient and the average residual squares to select the combination of the temperature variables.For the machine tools with complicated structures which need more initial temperature measuring points the improvement is demanded.The improved approach is applied to a precision horizontal machining center to identify the key thermal points.Experimental results show that the proposed approach is capable of avoiding the high correlation among the different groups' variables,effectively reducing the number of the key thermal points without depressing the prediction accuracy of the thermal error model for machine tools.展开更多
It is concluded from the results of testing the frequency characteristics of the sub micron precision machine tool servo control system, that the existence of several oscillating modalities is the main factor that aff...It is concluded from the results of testing the frequency characteristics of the sub micron precision machine tool servo control system, that the existence of several oscillating modalities is the main factor that affects the performance of the control system. To compensate for this effect,several concave filters are utilized in the system to improve the control accuracy. The feasibility of compensating for several oscillating modalities with a single concave filter is also studied. By applying a modified Butterworth concave filter to the practical system, the maximum stable state output error remains under ±10 nm in the closed loop positioning system.展开更多
Wear of cutting tools is a big concern for industrial manufacturers, because of their acquisition cost as well as the impact on the production lines when they are unavailable. Law of wear is very important in determin...Wear of cutting tools is a big concern for industrial manufacturers, because of their acquisition cost as well as the impact on the production lines when they are unavailable. Law of wear is very important in determining cutting tools lifespan, but most of the existing models don’t take into account the cutting temperature. In this work, the theoretical and experimental results of a dynamic study of metal machining against cutting temperature of a treated steel of grade S235JR with a high-speed steel tool are provided. This study is based on the analysis of two complementary approaches, an experimental approach with the measurement of the temperature and on the other hand, an approach using modeling. Based on unifactorial and multifactorial tests (speed of cut, feed, and depth of cut), this study allowed the highlighting of the influence of the cutting temperature on the machining time. To achieve this objective, two specific approaches have been selected. The first was to measure the temperature of the cutting tool and the second was to determine the wear law using Rayleigh-Ham dimensional analysis method. This study permitted the determination of a law that integrates the cutting temperature in the calculations of the lifespan of the tools during machining.展开更多
基金Supported by National Natural Science Foundation of China (Grant No.51975369)National Key Science and Technology Research Program of China (Grant No.2019ZX04027001)。
文摘Assembly geometric error as a part of the machine tool system errors has a significant influence on the machining accuracy of the multi-axis machine tool.And it cannot be eliminated due to the error propagation of components in the assembly process,which is generally non-uniformly distributed in the whole working space.A comprehensive expression model for assembly geometric error is greatly helpful for machining quality control of machine tools to meet the demand for machining accuracy in practice.However,the expression ranges based on the standard quasistatic expression model for assembly geometric errors are far less than those needed in the whole working space of the multi-axis machine tool.To address this issue,a modeling methodology based on the Jacobian-Torsor model is proposed to describe the spatially distributed geometric errors.Firstly,an improved kinematic Jacobian-Torsor model is developed to describe the relative movements such as translation and rotation motion between assembly bodies,respectively.Furthermore,based on the proposed kinematic Jacobian-Torsor model,a spatial expression of geometric errors for the multi-axis machine tool is given.And simulation and experimental verification are taken with the investigation of the spatial distribution of geometric errors on five four-axis machine tools.The results validate the effectiveness of the proposed kinematic Jacobian-Torsor model in dealing with the spatial expression of assembly geometric errors.
文摘This study explored the concurrent scheduling of machines, tools, and tool transporter(TT) with alternative machines in a multi-machine flexible manufacturing system(FMS), taking into mind the tool transfer durations for minimization of the makespan(MSN). When tools are expensive, just a single copy of every tool kind is made available for use in the FMS system. Because the tools are housed in a central tool magazine(CTM), which then distributes and delivers them to many machines, because there is no longer a need to duplicate the tools in each machine, the associated costs are avoided. Choosing alternative machines for job operations(jb-ons), assigning tools to jb-ons, sequencing jb-ons on machines, and arranging allied trip activities, together with the TT’s loaded trip times and deadheading periods, are all challenges that must be overcome to achieve the goal of minimizing MSN. In addition to a mixed nonlinear integer programming(MNLIP) formulation for this simultaneous scheduling problem, this paper suggests a symbiotic organisms search algorithm(SOSA) for the problem’s solution. This algorithm relies on organisms’ symbiotic interaction strategies to keep living in an ecosystem. The findings demonstrate that SOSA is superior to the Jaya algorithm in providing solutions and that using alternative machines for operations helps bring down MSN.
基金support by the Ministry of Science and Technology under Grant No.MOST 108-2622-E-169-006-CC3.
文摘The heating,ventilating,and air conditioning(HVAC)system consumes nearly 50%of the building’s energy,especially in Taiwan with a hot and humid climate.Due to the challenges in obtaining energy sources and the negative impacts of excessive energy use on the environment,it is essential to employ an energy-efficient HVAC system.This study conducted the machine tools building in a university.The field measurement was carried out,and the data were used to conduct energymodelling with EnergyPlus(EP)in order to discover some improvements in energy-efficient design.The validation between fieldmeasurement and energymodelling was performed,and the error rate was less than 10%.The following strategies were proposed in this study based on several energy-efficient approaches,including room temperature settings,chilled water supply temperature settings,chiller coefficient of performance(COP),shading,and building location.Energy-efficient approaches have been evaluated and could reduce energy consumption annually.The results reveal that the proposed energy-efficient approaches of room temperature settings(3.8%),chilled water supply temperature settings(2.1%),chiller COP(5.9%),using shading(9.1%),and building location(3.0%),respectively,could reduce energy consumption.The analysis discovered that using a well-performing HVAC system and building shading were effective in lowering the amount of energy used,and the energy modelling method could be an effective and satisfactory tool in determining potential energy savings.
基金Supported by National Natural Science Foundation of China(Grant No.11290144)Innovation Foundation of BUAA for Ph D Graduates,China
文摘Feedrate fluctuation caused by approximation errors of interpolation methods has great effects on machining quality in NURBS interpolation, but few methods can efficiently eliminate or reduce it to a satisfying level without sacrificing the computing efficiency at present. In order to solve this problem, a high accurate interpolation method for NURBS tool path is proposed. The proposed method can efficiently reduce the feedrate fluctuation by forming a quartic equation with respect to the curve parameter increment, which can be efficiently solved by analytic methods in real-time. Theoretically, the proposed method can totally eliminate the feedrate fluctuation for any 2nd degree NURBS curves and can interpolate 3rd degree NURBS curves with minimal feedrate fluctuation.Moreover, a smooth feedrate planning algorithm is also proposed to generate smooth tool motion with considering multiple constraints and scheduling errors by an efficient planning strategy. Experiments are conducted to verify the feasibility and applicability of the proposed method. This research presents a novel NURBS interpolation method with not only high accuracy but also satisfying computing efficiency.
基金The authors would like to express special thanks to Prof.Ji Zhou from the Chinese Academy of Engineering.This paper is supported by the National Natural Science Foundation of China(51675204 and 51575210)the National Science and Technology Major Project of the Ministry of Science and Technology of China(2018ZX04035002-002).
文摘With the development of modern information technology-and particularly of the new generation of artificial intelligence(AI)technology-new opportunities are available for the development of the intelligent machine tool(IMT).Based on the three classical paradigms of intelligent manufacturing as defined by the Chinese Academy of Engineering,the concept,characteristics,and systemic structure of the IMT are presented in this paper.Three stages of machine tool evolution-from the manually operated machine tool(MOMT)to the IMT-are discussed,including the numerical control machine tool(NCMT),the smart machine tool(SMT),and the IMT.Furthermore,the four intelligent control principles of the IMT-namely,autonomous sensing and connection,autonomous learning and modeling,autonomous optimization and decision-making,and autonomous control and execution-are presented in detail.This paper then points out that the essential characteristic of the IMT is to acquire and accumulate knowledge through learning,and presents original key enabling technologies,including the instruction-domain-based analytical approach,theoretical and big-data-based hybrid modeling technology,and the double-code control method.Based on this research,an intelligent numerical control(INC)system and industrial prototypes of IMTs are developed.Three intelligent practices are conducted,demonstrating that the integration of the new generation of AI technology with advanced manufacturing technology is a feasible and convenient way to advance machine tools toward the IMT.
基金supported by National Natural Science Foundation of China (Grant No. 51005207)Open Foundation of the Mechanical Engineering in Zhejiang University of Technology, China (Grant No.2009EP004)Foundation of Zhejiang Provincial Education Department of China (Grant No. Y200908129)
文摘The research on the parameters optimization for gasbag polishing machine tools, mainly aims at a better kinematics performance and a design scheme. Serial structural arm is mostly employed in gasbag polishing machine tools at present, but it is disadvantaged by its complexity, big inertia, and so on. In the multi-objective parameters optimization, it is very difficult to select good parameters to achieve excellent performance of the mechanism. In this paper, a statistics parameters optimization method based on index atlases is presented for a novel 5-DOF gasbag polishing machine tool. In the position analyses, the structure and workspace for a novel 5-DOF gasbag polishing machine tool is developed, where the gasbag polishing machine tool is advantaged by its simple structure, lower inertia and bigger workspace. In the kinematics analyses, several kinematics performance evaluation indices of the machine tool are proposed and discussed, and the global kinematics performance evaluation atlases are given. In the parameters optimization process, considering the assembly technique, a design scheme of the 5-DOF gasbag polishing machine tool is given to own better kinematics performance based on the proposed statistics parameters optimization method, and the global linear isotropic performance index is 0.5, the global rotational isotropic performance index is 0.5, the global linear velocity transmission performance index is 1.012 3 m/s in the case of unit input matrix, the global rotational velocity transmission performance index is 0.102 7 rad/s in the case of unit input matrix, and the workspace volume is 1. The proposed research provides the basis for applications of the novel 5-DOF gasbag polishing machine tool, which can be applied to the modern industrial fields requiring machines with lower inertia, better kinematics transmission performance and better technological efficiency.
基金Supported by Zhejiang Provincial Natural Science Foundation of China(Grant No.LQ16E050012)National Natural Science Foundation of China(Grant Nos.51705462 and 51275115)International Science and Technology Cooperation Program of China(Grant No.2015DFA70630)
文摘Ultra-precision machine tool is the most important physical tool to machining the workpiece with the frequency domain error requirement, in the design process of which the dynamic accuracy design(DAD) is indispensable and the related research is rarely available. In light of above reasons, a DAD method of ultra-precision machine tool is proposed in this paper, which is based on the frequency domain error allocation.The basic procedure and enabling knowledge of the DAD method is introduced. The application case of DAD method in the ultra-precision flycutting machine tool for KDP crystal machining is described to show the procedure detailedly. In this case, the KDP workpiece surface has the requirements in four different spatial frequency bands, and the emphasis for this study is put on the middle-frequency band with the PSD specifications. The results of the application case basically show the feasibility of the proposed DAD method. The DAD method of ultra-precision machine tool can effectively minimize the technical risk and improve the machining reliability of the designed machine tool. This paper will play an important role in the design and manufacture of new ultra-precision machine tool.
文摘Brittle materials are widely used for producing important components in the industry of optics,optoelectronics,and semiconductors.Ultraprecision machining of brittle materials with high surface quality and surface integrity helps improve the functional performance and lifespan of the components.According to their hardness,brittle materials can be roughly divided into hard-brittle and soft-brittle.Although there have been some literature reviews for ultraprecision machining of hard-brittle materials,up to date,very few review papers are available that focus on the processing of soft-brittle materials.Due to the‘soft’and‘brittle’properties,this group of materials has unique machining characteristics.This paper presents a comprehensive overview of recent advances in ultraprecision machining of soft-brittle materials.Critical aspects of machining mechanisms,such as chip formation,surface topography,and subsurface damage for different machining methods,including diamond turning,micro end milling,ultraprecision grinding,and micro/nano burnishing,are compared in terms of tool-workpiece interaction.The effects of tool geometries on the machining characteristics of soft-brittle materials are systematically analyzed,and dominating factors are sorted out.Problems and challenges in the engineering applications are identified,and solutions/guidelines for future R&D are provided.
基金This project is supported by National Advanced ResearchFoundation (No.PD521910) and National Natural ScienceFoundation of Ch
文摘The methods of identifying geometric error parameters for NC machine tools are introduced. According to analyzing and comparing the different methods, a new method-displacement method with 9 lines is developed based on the theories of the movement errors of multibody system (MBS). A lot of experiments are also made to obtain 21 terms geometric error parameters by using the error identification software based on the new method.
文摘The electrical system of CNC machine tool is very complex which involves many uncertain factors and dynamic stochastic characteristics when failure occurs.Therefore,the traditional system reliability analysis method,fault tree analysis(FTA)method,based on static logic and static failure mechanism is no longer applicable for dynamic systems reliability analysis.Dynamic fault tree(DFT)analysis method can solve this problem effectively.In this method,DFT first should be pretreated to get a simplified fault tree(FT);then the FT was modularized to get the independent static subtrees and dynamic subtrees.Binary decision diagram(BDD)analysis method was used to analyze static subtrees,while an approximation algorithm was used to deal with dynamic subtrees.When the scale of each subtree is smaller than the system scale,the analysis efficiency can be improved significantly.At last,the usefulness of this DFT analysis method was proved by applying it to analyzing the reliability of electrical system.
基金This project is supported by National Natural Science Foundation of China(59575063), the Provincial Natural Science Foundation o
文摘In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si4N3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.
基金Project(2014ZX04014-011)supported by State Key Science&Technology Program of ChinaProject([2016]414)supported by the 13th Five-year Program of Education Department of Jilin Province,China
文摘A new problem that classical statistical methods are incapable of solving is reliability modeling and assessment when multiple numerical control machine tools(NCMTs) reveal zero failures after a reliability test. Thus, the zero-failure data form and corresponding Bayesian model are developed to solve the zero-failure problem of NCMTs, for which no previous suitable statistical model has been developed. An expert-judgment process that incorporates prior information is presented to solve the difficulty in obtaining reliable prior distributions of Weibull parameters. The equations for the posterior distribution of the parameter vector and the Markov chain Monte Carlo(MCMC) algorithm are derived to solve the difficulty of calculating high-dimensional integration and to obtain parameter estimators. The proposed method is applied to a real case; a corresponding programming code and trick are developed to implement an MCMC simulation in Win BUGS, and a mean time between failures(MTBF) of 1057.9 h is obtained. Given its ability to combine expert judgment, prior information, and data, the proposed reliability modeling and assessment method under the zero failure of NCMTs is validated.
基金funded by the National Key Research and Development Program of China(2017YFA0605002,2017YFA0605004,and 2016YFA0601501)the National Natural Science Foundation of China(41961124007,51779145,and 41830863)“Six top talents”in Jiangsu Province(RJFW-031)。
文摘Model parameters estimation is a pivotal issue for runoff modeling in ungauged catchments.The nonlinear relationship between model parameters and catchment descriptors is a major obstacle for parameter regionalization,which is the most widely used approach.Runoff modeling was studied in 38 catchments located in the Yellow–Huai–Hai River Basin(YHHRB).The values of the Nash–Sutcliffe efficiency coefficient(NSE),coefficient of determination(R2),and percent bias(PBIAS)indicated the acceptable performance of the soil and water assessment tool(SWAT)model in the YHHRB.Nine descriptors belonging to the categories of climate,soil,vegetation,and topography were used to express the catchment characteristics related to the hydrological processes.The quantitative relationships between the parameters of the SWAT model and the catchment descriptors were analyzed by six regression-based models,including linear regression(LR)equations,support vector regression(SVR),random forest(RF),k-nearest neighbor(kNN),decision tree(DT),and radial basis function(RBF).Each of the 38 catchments was assumed to be an ungauged catchment in turn.Then,the parameters in each target catchment were estimated by the constructed regression models based on the remaining 37 donor catchments.Furthermore,the similaritybased regionalization scheme was used for comparison with the regression-based approach.The results indicated that the runoff with the highest accuracy was modeled by the SVR-based scheme in ungauged catchments.Compared with the traditional LR-based approach,the accuracy of the runoff modeling in ungauged catchments was improved by the machine learning algorithms because of the outstanding capability to deal with nonlinear relationships.The performances of different approaches were similar in humid regions,while the advantages of the machine learning techniques were more evident in arid regions.When the study area contained nested catchments,the best result was calculated with the similarity-based parameter regionalization scheme because of the high catchment density and short spatial distance.The new findings could improve flood forecasting and water resources planning in regions that lack observed data.
基金Supported by the Ministerial Level Advanced Research Foundation(51318020309)
文摘The objective of this study was to develop an online tool-wear-measurement scheme for small diameter end-mills based on machine vision to increase tool life and the production efficiency. The geometrical features of wear zone of each end mill were analyzed, and three tool wear criterions of small-diameter end mills were defined. With the uEye camera, macro lens and 3-axis micro milling machine, it was proved the feasibility of measuring flank wear with the milling tests on a 45# steel workpiece. The design of experiment (DOE) showed that Vc was the most remarkable effect factor for the flank wear of small-diameter end mill. The wear curve of the experiments of milling was very similar to the Taylor curve.
基金National Natural Science Foundation of China(No.50575084,No.50675126)Tianjin Municipal Science Technology Development Key Project,China(No.06YFGZGX00200)National Hi-tech Research Development Program of China(863 Program,No.2006AA04Z107)
文摘Adaptable design aims to extend the utilities of design and product.The specific methods are developed for practical applications of adaptable design in the design of mechanical structures, including adaptable platform,interface and module designs.Adaptable redesign problems are formulated as adaptable platform design under adaptability bound constraints.Analysis tools are then suggested for the implementation of the redesign of machine tool structures,including variation techniques based sensitivity analysis,similarity-based commonality analysis,performance improvement,and adaptability measures.The specific measure of adaptability for machine tool structures is measured through the quantification of the structural similarity and performance improvement gained from adaptable design.The method provides designers with an approach that brings adaptability into the design process,with considering the cost and benefits of such adaptability. The redesign of CNC spiral bevel gear cutting machine structures has been included to illustrate these concepts and methods.
基金supported by Jiangsu Provincial Prospective Joint Research Foundation for Industry-University-Research of China (Grant No. BY2009102)Henan Provincial Major Scientific and Technological Projects of China (Grant No. 102102210050)
文摘Machine tool thermal error is an important reason for poor machining accuracy.Thermal error compensation is a primary technology in accuracy control.To build thermal error model,temperature variables are needed to be divided into several groups on an appropriate threshold.Currently,group threshold value is mainly determined by researchers experience.Few studies focus on group threshold in temperature variable grouping.Since the threshold is important in error compensation,this paper arms to find out an optimal threshold to realize temperature variable optimization in thermal error modeling.Firstly,correlation coefficient is used to express membership grade of temperature variables,and the theory of fuzzy transitive closure is applied to obtain relational matrix of temperature variables.Concepts as compact degree and separable degree are introduced.Then evaluation model of temperature variable clustering is built.The optimal threshold and the best temperature variable clustering can be obtained by setting the maximum value of evaluation model as the objective.Finally,correlation coefficients between temperature variables and thermal error are calculated in order to find out optimum temperature variables for thermal error modeling.An experiment is conducted on a precise horizontal machining center.In experiment,three displacement sensors are used to measure spindle thermal error and twenty-nine temperature sensors are utilized to detect the machining center temperature.Experimental result shows that the new method of temperature variable optimization on optimal threshold successfully worked out a best threshold value interval and chose seven temperature variables from twenty-nine temperature measuring points.The model residual of z direction is within 3 m.Obviously,the proposed new variable optimization method has simple computing process and good modeling accuracy,which is quite fit for thermal error compensation.
基金Sponsored by the Special Fund for Scientific and Technological Achievement Transformation of Jiangsu Provincethe Basic Scientific Research Professional Expense of NUAA for Special Project
文摘The grouping and optimization approach to identify the key thermal points on machine tools is studied.To solve the difficulty in grouping because of the high correlated variables from distinct groups,the variables grouping technique is improved.Temperature variables are sorted according to their relativities with the thermal errors.The representative temperature variables are determined by analyzing the variable correlation in sort order and removing the other variables in the same group.Considering the diverse effect of importing the different variables on thermal error model,the method of variable combination optimization is improved.Regression models made up of different combination of representative temperature variables are evaluated by the index of both the determined coefficient and the average residual squares to select the combination of the temperature variables.For the machine tools with complicated structures which need more initial temperature measuring points the improvement is demanded.The improved approach is applied to a precision horizontal machining center to identify the key thermal points.Experimental results show that the proposed approach is capable of avoiding the high correlation among the different groups' variables,effectively reducing the number of the key thermal points without depressing the prediction accuracy of the thermal error model for machine tools.
文摘It is concluded from the results of testing the frequency characteristics of the sub micron precision machine tool servo control system, that the existence of several oscillating modalities is the main factor that affects the performance of the control system. To compensate for this effect,several concave filters are utilized in the system to improve the control accuracy. The feasibility of compensating for several oscillating modalities with a single concave filter is also studied. By applying a modified Butterworth concave filter to the practical system, the maximum stable state output error remains under ±10 nm in the closed loop positioning system.
文摘Wear of cutting tools is a big concern for industrial manufacturers, because of their acquisition cost as well as the impact on the production lines when they are unavailable. Law of wear is very important in determining cutting tools lifespan, but most of the existing models don’t take into account the cutting temperature. In this work, the theoretical and experimental results of a dynamic study of metal machining against cutting temperature of a treated steel of grade S235JR with a high-speed steel tool are provided. This study is based on the analysis of two complementary approaches, an experimental approach with the measurement of the temperature and on the other hand, an approach using modeling. Based on unifactorial and multifactorial tests (speed of cut, feed, and depth of cut), this study allowed the highlighting of the influence of the cutting temperature on the machining time. To achieve this objective, two specific approaches have been selected. The first was to measure the temperature of the cutting tool and the second was to determine the wear law using Rayleigh-Ham dimensional analysis method. This study permitted the determination of a law that integrates the cutting temperature in the calculations of the lifespan of the tools during machining.