Piecewise Acoustic Source Imaging with Unknown Speed of Sound Using a Level-Set Method

We investigate the following inverse problem:starting from the acoustic wave equation,reconstruct a piecewise constant passive acoustic source from a single boundary temporal measurement without knowing the speed of sound.When the amplitudes of the source are known a priori,we prove a unique determination result of the shape and propose a level set algorithm to reconstruct the singularities.When the singularities of the source are known a priori,we show unique determination of the source amplitudes and propose a least-squares fitting algorithm to recover the source amplitudes.The analysis bridges the low-frequency source inversion problem and the inverse problem of gravimetry.The proposed algorithms are validated and quantitatively evaluated with numerical experiments in 2D and 3D.

Clinical issues and challenges in imaging of gastrointestinal diseases:A minireview and our experience

Imaging techniques play a crucial role in the modern era of medicine,particularly in gastroenterology.Nowadays,various non-invasive and invasive imaging modalities are being routinely employed to evaluate different gastrointestinal(GI)diseases.However,many instrumental as well as clinical issues are arising in the area of modern GI imaging.This minireview article aims to briefly overview the clinical issues and challenges encountered in imaging GI diseases while highlighting our experience in the field.We also summarize the advances in clinically available diagnostic methods for evaluating different diseases of the GI tract and demonstrate our experience in the area.In conclusion,almost all imaging techniques used in imaging GI diseases can also raise many challenges that necessitate careful consideration and profound expertise in this field.

Lossless Compression Method for the Magnetic and Helioseismic Imager(MHI)Payload

The Solar Polar-orbit Observatory(SPO),proposed by Chinese scientists,is designed to observe the solar polar regions in an unprecedented way with a spacecraft traveling in a large solar inclination angle and a small ellipticity.However,one of the most significant challenges lies in ultra-long-distance data transmission,particularly for the Magnetic and Helioseismic Imager(MHI),which is the most important payload and generates the largest volume of data in SPO.In this paper,we propose a tailored lossless data compression method based on the measurement mode and characteristics of MHI data.The background out of the solar disk is removed to decrease the pixel number of an image under compression.Multiple predictive coding methods are combined to eliminate the redundancy utilizing the correlation(space,spectrum,and polarization)in data set,improving the compression ratio.Experimental results demonstrate that our method achieves an average compression ratio of 3.67.The compression time is also less than the general observation period.The method exhibits strong feasibility and can be easily adapted to MHI.

Advancements and challenges in gastrointestinal imaging

A recent review by Gulinac et al,provides an in-depth analysis of current clinical issues and challenges in gastrointestinal imaging.This editorial highlights the advancements in imaging techniques,including the integration of artificial intelligence and functional imaging modalities,and discusses the ongoing relevance of traditional nuclear medicine tests.The future of gastrointestinal imaging looks promising,with continuous improvements in resolution,enhanced ability to analyze color and texture beyond visual diagnosis,faster image processing,and the application of molecular imaging and nanoparticles expected to enhance diagnostic accuracy and clinical outcomes.

A Visual Indoor Localization Method Based on Efficient Image Retrieval

The task of indoor visual localization, utilizing camera visual information for user pose calculation, was a core component of Augmented Reality (AR) and Simultaneous Localization and Mapping (SLAM). Existing indoor localization technologies generally used scene-specific 3D representations or were trained on specific datasets, making it challenging to balance accuracy and cost when applied to new scenes. Addressing this issue, this paper proposed a universal indoor visual localization method based on efficient image retrieval. Initially, a Multi-Layer Perceptron (MLP) was employed to aggregate features from intermediate layers of a convolutional neural network, obtaining a global representation of the image. This approach ensured accurate and rapid retrieval of reference images. Subsequently, a new mechanism using Random Sample Consensus (RANSAC) was designed to resolve relative pose ambiguity caused by the essential matrix decomposition based on the five-point method. Finally, the absolute pose of the queried user image was computed, thereby achieving indoor user pose estimation. The proposed indoor localization method was characterized by its simplicity, flexibility, and excellent cross-scene generalization. Experimental results demonstrated a positioning error of 0.09 m and 2.14° on the 7Scenes dataset, and 0.15 m and 6.37° on the 12Scenes dataset. These results convincingly illustrated the outstanding performance of the proposed indoor localization method.

A review of the wave gradiometry method for seismic imaging

As dense seismic arrays at different scales are deployed,the techniques to make full use of array data with low computing cost become increasingly needed.The wave gradiometry method(WGM)is a new branch in seismic tomography,which utilizes the spatial gradients of the wavefield to determine the phase velocity,wave propagation direction,geometrical spreading,and radiation pattern.Seismic wave propagation parameters obtained using the WGM can be further applied to invert 3D velocity models,Q values,and anisotropy at lithospheric(crust and/or mantle)and smaller scales(e.g.,industrial oilfield or fault zone).Herein,we review the theoretical foundation,technical development,and major applications of the WGM,and compared the WGM with other commonly used major array imaging methods.Future development of the WGM is also discussed.

Correlations between mineral composition and mechanical properties of granite using digital image processing and discrete element method

This study investigated the correlations between mechanical properties and mineralogy of granite using the digital image processing(DIP) and discrete element method(DEM). The results showed that the X-ray diffraction(XRD)-based DIP method effectively analyzed the mineral composition contents and spatial distributions of granite. During the particle flow code(PFC2D) model calibration phase, the numerical simulation exhibited that the uniaxial compressive strength(UCS) value, elastic modulus(E), and failure pattern of the granite specimen in the UCS test were comparable to the experiment. By establishing 351 sets of numerical models and exploring the impacts of mineral composition on the mechanical properties of granite, it indicated that there was no negative correlation between quartz and feldspar for UCS, tensile strength(σ_(t)), and E. In contrast, mica had a significant negative correlation for UCS, σ_(t), and E. The presence of quartz increased the brittleness of granite, whereas the presence of mica and feldspar increased its ductility in UCS and direct tensile strength(DTS) tests. Varying contents of major mineral compositions in granite showed minor influence on the number of cracks in both UCS and DTS tests.

Relational graph location network for multi-view image localization

In multi-view image localization task,the features of the images captured from different views should be fused properly.This paper considers the classification-based image localization problem.We propose the relational graph location network(RGLN)to perform this task.In this network,we propose a heterogeneous graph construction approach for graph classification tasks,which aims to describe the location in a more appropriate way,thereby improving the expression ability of the location representation module.Experiments show that the expression ability of the proposed graph construction approach outperforms the compared methods by a large margin.In addition,the proposed localization method outperforms the compared localization methods by around 1.7%in terms of meter-level accuracy.

Adaptive Boundary and Semantic Composite Segmentation Method for Individual Objects in Aerial Images

There are two types of methods for image segmentation.One is traditional image processing methods,which are sensitive to details and boundaries,yet fail to recognize semantic information.The other is deep learning methods,which can locate and identify different objects,but boundary identifications are not accurate enough.Both of them cannot generate entire segmentation information.In order to obtain accurate edge detection and semantic information,an Adaptive Boundary and Semantic Composite Segmentation method(ABSCS)is proposed.This method can precisely semantic segment individual objects in large-size aerial images with limited GPU performances.It includes adaptively dividing and modifying the aerial images with the proposed principles and methods,using the deep learning method to semantic segment and preprocess the small divided pieces,using three traditional methods to segment and preprocess original-size aerial images,adaptively selecting traditional results tomodify the boundaries of individual objects in deep learning results,and combining the results of different objects.Individual object semantic segmentation experiments are conducted by using the AeroScapes dataset,and their results are analyzed qualitatively and quantitatively.The experimental results demonstrate that the proposed method can achieve more promising object boundaries than the original deep learning method.This work also demonstrates the advantages of the proposed method in applications of point cloud semantic segmentation and image inpainting.

Autofocus technique for ISAR imaging of uniformly rotating targets based on the ExCoV method

The inverse synthetic aperture radar (ISAR) imaging can be converted into a sparse reconstruction problem and solved by the l1norm minimization algorithm. The basis matrix in sparse ISAR imaging is usually characterized by the unknown rotation rate of a moving target, thus the rotation rate and the sparse signal should be jointly estimated. Especially due to the imperfect coarse motion compensation, we consider the phase error correction problem in the context of the sparse signal reconstruction. To address this issue, we propose an iterative reweighted method, which jointly estimates the rotation rate, corrects the phase error and reconstructs a high resolution ISAR image. The proposed method gives a gradual and interweaved iterative process to refine the unknown parameters to achieve the best sparse representation for the ISAR signals. Particularly, in ISAR image reconstruction, the l1norm minimization algorithm is sensitive to user parameters. Setting these user parameters are not trivial and the reconstruction performance depends significantly on their choices. Then, we consider an expansion-compression variance-component (ExCoV) based method, which is automatic and demands no prior knowledge about signal-sparsity or measurement-noise levels. Both numerical and electromagnetic data experiments are implemented to show the effectiveness of the proposed method. It is shown that the proposed method can estimate the rotation rate and correct the phase errors simultaneously, and its superior performance is proved in terms of high resolution ISAR image. © 2017 Beijing Institute of Aerospace Information.

Three-dimensional color particle image velocimetry based on a cross-correlation and optical flow method

Rainbow particle image velocimetry(PIV)can restore the three-dimensional velocity field of particles with a single camera;however,it requires a relatively long time to complete the reconstruction.This paper proposes a hybrid algorithm that combines the fast Fourier transform(FFT)based co-correlation algorithm and the Horn–Schunck(HS)optical flow pyramid iterative algorithm to increase the reconstruction speed.The Rankine vortex simulation experiment was performed,in which the particle velocity field was reconstructed using the proposed algorithm and the rainbow PIV method.The average endpoint error and average angular error of the proposed algorithm were roughly the same as those of the rainbow PIV algorithm;nevertheless,the reconstruction time was 20%shorter.Furthermore,the effect of velocity magnitude and particle density on the reconstruction results was analyzed.In the end,the performance of the proposed algorithm was verified using real experimental single-vortex and double-vortex datasets,from which a similar particle velocity field was obtained compared with the rainbow PIV algorithm.The results show that the reconstruction speed of the proposed hybrid algorithm is approximately 25%faster than that of the rainbow PIV algorithm.

A Content-Based Medical Image Retrieval Method Using Relative Difference-Based Similarity Measure

Content-based medical image retrieval(CBMIR)is a technique for retrieving medical images based on automatically derived image features.There are many applications of CBMIR,such as teaching,research,diagnosis and electronic patient records.Several methods are applied to enhance the retrieval performance of CBMIR systems.Developing new and effective similarity measure and features fusion methods are two of the most powerful and effective strategies for improving these systems.This study proposes the relative difference-based similarity measure(RDBSM)for CBMIR.The new measure was first used in the similarity calculation stage for the CBMIR using an unweighted fusion method of traditional color and texture features.Furthermore,the study also proposes a weighted fusion method for medical image features extracted using pre-trained convolutional neural networks(CNNs)models.Our proposed RDBSM has outperformed the standard well-known similarity and distance measures using two popular medical image datasets,Kvasir and PH2,in terms of recall and precision retrieval measures.The effectiveness and quality of our proposed similarity measure are also proved using a significant test and statistical confidence bound.

Efficient hybrid method for time reversal superresolution imaging

An efficient hybrid time reversal（TR） imaging method based on signal subspace and noise subspace is proposed for electromagnetic superresolution detecting and imaging. First, the locations of targets are estimated by the transmitting-mode decomposition of the TR operator（DORT） method employing the signal subspace. Then, the TR multiple signal classification（TR-MUSIC）method employing the noise subspace is used in the estimated target area to get the superresolution imaging of targets. Two examples with homogeneous and inhomogeneous background mediums are considered, respectively. The results show that the proposed hybrid method has advantages in CPU time and memory cost because of the combination of rough and fine imaging.

A Single Image Derain Method Based on Residue Channel Decomposition in Edge Computing

The numerous photos captured by low-price Internet of Things(IoT)sensors are frequently affected by meteorological factors,especially rainfall.It causes varying sizes of white streaks on the image,destroying the image texture and ruining the performance of the outdoor computer vision system.Existing methods utilise training with pairs of images,which is difficult to cover all scenes and leads to domain gaps.In addition,the network structures adopt deep learning to map rain images to rain-free images,failing to use prior knowledge effectively.To solve these problems,we introduce a single image derain model in edge computing that combines prior knowledge of rain patterns with the learning capability of the neural network.Specifically,the algorithm first uses Residue Channel Prior to filter out the rainfall textural features then it uses the Feature Fusion Module to fuse the original image with the background feature information.This results in a pre-processed image which is fed into Half Instance Net(HINet)to recover a high-quality rain-free image with a clear and accurate structure,and the model does not rely on any rainfall assumptions.Experimental results on synthetic and real-world datasets show that the average peak signal-to-noise ratio of the model decreases by 0.37 dB on the synthetic dataset and increases by 0.43 dB on the real-world dataset,demonstrating that a combined model reduces the gap between synthetic data and natural rain scenes,improves the generalization ability of the derain network,and alleviates the overfitting problem.

Three-dimensional,isotropic imaging of mouse brain using multi-view deconvolution light sheet microscopy

We present a threedimensional(3D)isotropic imaging of mouse brain using light-sheet fuo-rescent microscopy(LSFM)in conjumction with a multi-view imaging computation.Unlike common single view LSFM is used for mouse brain imaging,the brain tissue is 3D imaged under eight views in our study,by a home-built selective plane ilumination microscopy(SPIM).An output image containing complete structural infornation as well as significantly improved res olution(~4 times)are then computed based on these eight views of data,using a bead-guided multi-view registration and deconvolution.With superior imaging quality,the astrocyte and pyrarmidal neurons together with their subcellular nerve fbers can be clearly visualized and segmented.With further incuding other computational methods,this study can be potentially scaled up to map the conectome of whole mouse brain with a simple light.sheet microscope.

A Hierarchical Method for Locating the Interferometric Fringes of Celestial Sources in the Visibility Data

In source detection in the Tianlai project,locating the interferometric fringe in visibility data accurately will influence downstream tasks drastically,such as physical parameter estimation and weak source exploration.Considering that traditional locating methods are time-consuming and supervised methods require a great quantity of expensive labeled data,in this paper,we first investigate characteristics of interferometric fringes in the simulation and real scenario separately,and integrate an almost parameter-free unsupervised clustering method and seeding filling or eraser algorithm to propose a hierarchical plug and play method to improve location accuracy.Then,we apply our method to locate single and multiple sources’interferometric fringes in simulation data.Next,we apply our method to real data taken from the Tianlai radio telescope array.Finally,we compare with unsupervised methods that are state of the art.These results show that our method has robustness in different scenarios and can improve location measurement accuracy effectively.

A Preliminary Comparative Study on the Centering Algorithms for CassiniISS NAC Images

Obtaining high precision is an important consideration for astrometric studies using images from the Narrow Angle Camera(NAC)of the Cassini Imaging Science Subsystem(ISS).Selecting the best centering algorithm is key to enhancing astrometric accuracy.In this study,we compared the accuracy of five centering algorithms:Gaussian fitting,the modified moments method,and three point-spread function(PSF)fitting methods(effective PSF(ePSF),PSFEx,and extended PSF(x PSF)from the Cassini Imaging Central Laboratory for Operations(CICLOPS)).We assessed these algorithms using 70 ISS NAC star field images taken with CL1 and CL2 filters across different stellar magnitudes.The ePSF method consistently demonstrated the highest accuracy,achieving precision below 0.03 pixels for stars of magnitude 8-9.Compared to the previously considered best,the modified moments method,the e PSF method improved overall accuracy by about 10%and 21%in the sample and line directions,respectively.Surprisingly,the xPSF model provided by CICLOPS had lower precision than the ePSF.Conversely,the ePSF exhibits an improvement in measurement precision of 23%and 17%in the sample and line directions,respectively,over the xPSF.This discrepancy might be attributed to the xPSF focusing on photometry rather than astrometry.These findings highlight the necessity of constructing PSF models specifically tailored for astrometric purposes in NAC images and provide guidance for enhancing astrometric measurements using these ISS NAC images.

A new two-step variational model for multiplicative noise removal with applications to texture images

Multiplicative noise removal problems have attracted much attention in recent years.Unlike additive noise,multiplicative noise destroys almost all information of the original image,especially for texture images.Motivated by the TV-Stokes model,we propose a new two-step variational model to denoise the texture images corrupted by multiplicative noise with a good geometry explanation in this paper.In the first step,we convert the multiplicative denoising problem into an additive one by the logarithm transform and propagate the isophote directions in the tangential field smoothing.Once the isophote directions are constructed,an image is restored to fit the constructed directions in the second step.The existence and uniqueness of the solution to the variational problems are proved.In these two steps,we use the gradient descent method and construct finite difference schemes to solve the problems.Especially,the augmented Lagrangian method and the fast Fourier transform are adopted to accelerate the calculation.Experimental results show that the proposed model can remove the multiplicative noise efficiently and protect the texture well.

Preparation for CSST:Star-galaxy Classification using a Rotationally Invariant Supervised Machine Learning Method

Most existing star-galaxy classifiers depend on the reduced information from catalogs,necessitating careful data processing and feature extraction.In this study,we employ a supervised machine learning method(GoogLeNet)to automatically classify stars and galaxies in the COSMOS field.Unlike traditional machine learning methods,we introduce several preprocessing techniques,including noise reduction and the unwrapping of denoised images in polar coordinates,applied to our carefully selected samples of stars and galaxies.By dividing the selected samples into training and validation sets in an 8:2 ratio,we evaluate the performance of the GoogLeNet model in distinguishing between stars and galaxies.The results indicate that the GoogLeNet model is highly effective,achieving accuracies of 99.6% and 99.9% for stars and galaxies,respectively.Furthermore,by comparing the results with and without preprocessing,we find that preprocessing can significantly improve classification accuracy(by approximately 2.0% to 6.0%)when the images are rotated.In preparation for the future launch of the China Space Station Telescope(CSST),we also evaluate the performance of the GoogLeNet model on the CSST simulation data.These results demonstrate a high level of accuracy(approximately 99.8%),indicating that this model can be effectively utilized for future observations with the CSST.

A Second-Order Image Denoising Model for Contrast Preservation

In this work,we propose a second-order model for image denoising by employing a novel potential function recently developed in Zhu(J Sci Comput 88:46,2021)for the design of a regularization term.Due to this new second-order derivative based regularizer,the model is able to alleviate the staircase effect and preserve image contrast.The augmented Lagrangian method(ALM)is utilized to minimize the associated functional and convergence analysis is established for the proposed algorithm.Numerical experiments are presented to demonstrate the features of the proposed model.