Glassy carbon electrode modified with multi-walled carbon nanotubes sensor for the quantihication of antihistamine drug pheniramine in solubilized systems

A sensitive electroanalytical method for quantification of pheniramine in pharmaceutical formulation has been investigated on the basis of the enhanced electrochemical response at glassy carbon electrode modified with multi-walled carbon nanotubes in the presence of sodium lauryl sulfate.The experimental results suggest that the phcniramine in anionic surfactant solution exhibits electrocatalytic effect resulting in a marked enhancement of the peak current response.Peak current response is linearly dependent on the concentration of pheniramine in the range 200-1500 μg/mL with correlation coefficient 0.9987.The limit of detection is 58.31 μg/m L.The modified electrode shows good sensitivity and repeatability.

Determination of 6-Mercaptopurine in Rat Blood by Microdialysis Coupled with High Performance Liquid Chromatography on a Functionalized Multi-wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electrocatalytic oxidation of 6-mercaptopurine(6-MP). The CME can be used as the working electrode in the liquid chromatography for the determination of 6-MP. The peak current of 6-MP is linearly changed with its concentration ranging from 4.0×10 -7 to 1.0×10 -4 mol/L with the calculated detection limit (S/N=3) of 2.0×10 -7 mol/L. Coupled with microdialysis sampling, the method has been successfully applied to assessing the content of 6-MP in rat blood.

Electrocatalytic behaviors of poly acridine orange/multi-walled carbon nanotube modified electrode

In this work, noncovalent functionalization of multiwalled carbon nanotube （MWNT） with acridine orange （AO） by electropolymerization is studied. The obtained composite film is a viable alternate electrode material, non-toxic, chemical inert, not volatile, using to construct modified electrode. The new type modified electrode has both of unique properties of MWNT and poly acridine orange （POAO）, can provide good sensitivity, low limits of detection, good response precision, and superb response stability.

Study of enzyme biosensor based on carbon nanotubes modified electrode for detection of pesticides residue

The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon electrode （GCE）, Acetylcholinesterase （ACHE） was immobilized directly to the modified GCE by LBL self-assembly method, the activity value of AChE was detected by using i-t technique based on the modified Ellman method. Then the composition of carbaryl were detected by the enzyme electrode with 0.01U activity value and the detection limit of carbaryl is 10^- 12 g L ^-1 so the enzyme biosensor showed good properties for pesticides residue detection.

Sensitive voltammetric determination of xanthinol nicotinate at a carbon nanotubes-ionic liquid gel modified electrode

The electrochemistry of xanthinol nicotinate （Xan） was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes （MWNTs） and room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate （BMIMPF6）. The modified electrode exhibited good promotion to the electrochemical oxidation of Xan and an ultrasensitive electrochemical method was proposed for the determination of Xan. This method was successfully applied to the determination of Xan in Xan tablets. C 2009 XiaoYu Bao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Direct Electrochemistry of Catalase on Single Wall Carbon Nanotubes Modified Glassy Carbon Electrode

Direct electrochemistry of catalase (Ct) has been studied on single wall carbon nanotubes (SWNTs) modified glassy carbon (GC) electrode. A pair of well-defined nearly reversible redox peaks is given at –0.48 V (vs. SCE) in 0.1 mol/L phosphate solution (pH 7.0). The peak current in cyclic voltammogram is proportional to the scan rate. The peak potential of catalase is shifted to more negative value when the pH increases. Catalase can adsorb on the SWNTs modified electrode.

Pyrolyzed Iron Phthalocyanine-Modified Multi-Walled Carbon Nanotubes as Composite Anode in Marine Sediment Microbial Fuel Cells and Its Electrochemical Performance

Improving the performance of anode is a crucial step for increasing output power of marine sediment microbial fuel cells(MSMFCs)to drive marine monitor to work for a long term on the ocean floor.A pyrolyzed iron phthalocyanine modified multi-walled carbon nanotubes composite(FePc/MWCNTs)has been utilized as a novel nodified anode in the MSMFC.Its structure of the composite modified anode and electrochemical performance have been investigated respectively in the paper.There is a substantial improvement in electron-transfer efficiency from the bacteria biofilm to the modified anode via the pyrolyzed FePc/MWCNTs composite based on their cyclic voltammetry(CV)and Tafel curves.The electron transfer kinetic activity of the FePc/MWCNTs-modified anode is 1.86 times higher than of the unmodified anode.The maximum power density of the modified MSMFC was 572.3±14 m W m^-2,which is 2.6 times larger than the unmodified one(218.3±11 m W m^-2).The anodic structure and cell scale would be greatly minimized to obtain the same output power by the modified MSMFC,so that it will make the MSMFC to be easily deployed on the remote ocean floor.Therefore,it would have a great significance for us to design a novel and renewable long term power source.Finally,a novel molecular synergetic mechanism is proposed to elucidate its excellent electrochemical performance.

Polyaniline and multi-walled carbon nanotube composite electrode for rechargeable battery

The multi-walled carbon nanotube was introduced into the polymer matrix (PANI) to improve the electric conductivity as well as mechanical properties of the original polymer matrix.PANI/multi-walled carbon nanotube (MWCNT) composites were synthesized via ex-situ and in-situ polymerization to improve their electrical property.And the DC conductivities of PANI/MWCNT according to content and diameter of MWCNT were measured by four-point probe.The highest electric conductivity of PANI/MWCNT composite is 20 S/cm when 0.3% (mass fraction) MWCNTs with 10 nm in diameter and 15 μm in length are added in composite.

Electrooxidation of Nitric Oxide at a Glass Carbon Electrode Modified with Functionalized Single-walled Carbon Nanotube

The electrocatalytic oxidation of nitric oxide（NO） at a glass carbon electrode（GC） modified with functionalized single-walled carbon nanotubes（SWCNTs） was investigated by cyclic voltammetry（CV） and electrochemical impedance spectroscopy（EIS）.It was found that the SWCNT modified electrode could speed greatly up the electron transfer rate compared with the bare GC electrode.After the SWCNT was treated with alkali or mixed acids,the reaction rate and activation energy of NO electrooxidation were changed to different extent.Chemical modification of the SWCNT surface is one of the most powerful methods to change the sensitivity of NO electrooxidation reaction.The modified electrode with SWCNT obtained by the firstly alkali treatment and then the mixed acids treatment was the best one for NO electrooxidation,the result of CV was also confirmed by that of EIS.The anodic processes of NO were recognized more clearly by exploring the reaction mechanism of NO electrooxidation at the SWCNT modified electrode.

Voltammetric Response of Epinephrine at Carbon Nanotube Modified Glassy Carbon Electrode and Activated Glassy Carbon Electrode

The electrochemical behavior of epinephrine at activated glassy carbon electrode and carbon nanotube-coated glassy carbon electrode was studied. Epinephrine could exhibit an anodic peak at about 0.2 V （vs. SCE） at bare glassy carbon electrode, but it was very small. However, when the electrode was activated at certain potential （i.e. 1.9 V） or modified with carbon nanotube, the peak became more sensitive, resulting from the increase in electrode area in addition to the electrostatic attraction. Under the selected conditions, the anodic peak current was linear to epinephrine concentration in the range of 3.3×10^-7 - 1.1×10^-5 mol/L at activated glassy carbon electrode and in the range of 1.0×10^-5 - 5.0×10^-5 mol/L at carbon nanotube-coated electrode. The correlation coefficients were 0.998 and 0.997, respectively. The determination limit was 1.0×10^-7 mol/L. The two electrodes have been successfully applied for the determination of epinephrine in adrenaline hydrochloride injection with recovery of 95%-104%.

Flow Injection Amperometric Determination of Phenol and Chlorophenols at Single Wall Carbon Nanotube Modified Glassy Carbon Electrode

Single wall carbon nanotube modified glassy carbon electrode (SWCNT/GCE) was used for flow-injection analysis (FIA) for phenolic compounds (phenol (P), 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorphenol (TCP) and pentachlorophenol (PCP)). Experimental variables such as the detection potential, flow rate and pH of the carrier solution, 0.1 M sodium acetate, were optimized. Under these conditions, the designed electrode showed a very good performance for the amperometric measurements, with no need to apply a cleaning or pre-treatment procedure. The operational stability was tested with 20 repetitive injections of each analyte and was found to be good. The analytical performance of the SWCNT/GCE electrode under flow through conditions was tested and was found to be impressive. When it is compared with other enzymatic and non-enzymatic sensors, it shows wider dynamic range for the detection of phenolic compounds with low limits of detection. These results suggest that the method is quite useful for monitoring and analyzing phenols and chlorophenols.

Electrochemical behaviors of lomefloxacin at a single-wall carbon nanotube-modified electrode and its interaction with bovine serum albumin

The electrochemical behaviors of lomefloxacin at a single-wall carbon nanotube-modified glassy carbon electrode have been investigated by cyclic voltammetry.In a Britton-Robinson buffer (pH 4.5),lomefloxacin yields a sensitive and well-defined oxidation peak at ca.1.24 V (vs.SCE) on the modified electrode.Compared with the bare glassy carbon electrode,the oxidation peak current of lomefloxacin significantly increases and the oxidation peak potential positively shifts.Under the optimal conditions,the interaction of lomefloxacin with bovine serum albumin is also investigated.The results indicate that an electrochemically inactive supramolecular complex is formed and the formation of complex between lomefloxacin and bovine serum albumin is an intercalation mechanism.The proposed methods offer a reference for the studies on the biological effects and action mechanism of lomefloxacin with albumins in vivo.

Sucrose pyrolysis assembling carbon nanotubes on graphite felt using for vanadium redox flow battery positive electrode

In the present paper, multi-walled carbon nanotubes（MWCNTs） are successfully assembled on graphite felt（GF） using sucrose pyrolysis method for the first time. The in situ formed pyrolytic carbon is chosen as the binder because it is essentially carbon materials as well as CNTs and GF which has a natural tendency to achieve high bonding strength and low contact resistance. The MWCNTs/GF electrode is demonstrated to increase surface area, reduce polarization, lower charge transfer resistance and improve energy conversion efficiency comparing with GF. This excellent electrochemical performance is mainly ascribed to the high electro-catalytic activity of MWCNTs and increasing surface area.

Study on the supramolecular systems of two basic violets with cyclodextrins by MWNTs/Nafion modified glassy carbon electrode

Abstract The electrochemical properties of two basic violets （methyl violet and ethyl violet） at the MWNTs/Nafion modified glassy carbon electrode were investigated. The redox of the basic violets is two-electron and two-proton process, and methyl violet presents stronger electron transfer capacity than ethyl violet. Meanwhile, the inclusion constants of the two basic violets with five CDs were determined by differential pulse voltammetry （DPV）. The two basic violets and CDs can form 1：1 complexes, The inclusion capacities of the two basic violets follow the same order： CM-β-CD 〉 HP-β-CD 〉 TM-β-CD 〉 DM-β- CD 〉 β-CD. ？2009 Yu Jing Guo. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Modification of Carbon Nanotube Powder Microelectrode and Nitrite Reduction

The properties of the carbon nanotube powder microelectrodes (denoted CNTPME) are remarkably altered by anodic pretreatment and preadsorption of mediators. It seems that anodic pretreatment leads the long and tangled carbon nanotubes to be partially cut shorter, resulting in more openings as shown by TEM. Besides, the anodic pretreatment may adjust the hydrophobicity of nanotubes to match with that of Os(bpy)32+. As a result, the real surface area and the ability of adsorbing mediator Os(bpy)32+ of the nanotubes are markedly increased so as to effectively catalyze NO2- reduction in acidic solution.

Trace determination of zirconium using anodic adsorptive voltammetry at a carbon paste electrode modified with multi-walled carbon nanotubes

A carbon paste electrode modified with multi-walled carbon nanotubes (MWCNT) was prepared and the determination of ultra trace amount of zirconium based on the anodic adsorptive voltammetry of the zirconium-calcium-alizarin red S mix-polynuclear complex is described in this paper for the first time. The results showed that the sensitivity and the selectivity of the method are excellent. The second de-rivative linear scan voltammograms of the complex were recorded by polarographic analyzer from 200 to 1200 mV (vs. SCE) and it was found that the complex can be adsorbed on the surface of the electrode, yielding a peak at about 840 mV, corresponding to the oxidation of ARS in the complex. The peak cur-rent increases linearly with Zr (IV) concentration in the range of 6.0×10-12―6.0×10-11 mol·L-1 (accumu-lation time 120 s), 6.0×10-11―2.0×10-9 mol·L-1 (accumulation time 90 s) and 2.0×10-9―1.0×10-7 mol·L-1 (accumulation time 60 s) and the detection limit (S/N = 3) is 2.0×10-12 mol·L-1 (accumulation time 180 s). The procedure has been successfully applied to the determination of zirconium in the ore samples.

Synthesis and characterization of novel dopamine-derivative:Application of modified multi-wall carbon nanotubes paste electrode for electrochemical investigation

Novel dopamine-derivative compound,3,5-diamino-N-（3,4-dihydroxyphenethyl）benzamide（3,5-DAB）was prepared in two steps.In the first step dopamine hydrochloride was reacted with 3,5-dinitrobenzoyl chloride in the presence of propylene oxide.In the second step reduction of nitro groups resulted in preparation of 3,5-DAB in quantitative yield.This material was characterized using conventional spectroscopic methods such as FT-IR and ~1H NMR.In addition,the redox response of a modified carbon nanotubes paste electrode of 3,5-DAB was investigated in aqueous solution at a neutral pH.The result showed that the electrode process has a quasi-reversible response,withΔE_p,greater than the（59/n） mV expected for a reversible system.Finally,the diffusion coefficient for redox process in paraffin oil matrix obtained using chronoamperometry methods.

Electrochemical Studies of Cytochrome c on Electrodes Modified by Single-Wall Carbon Nanotubes

Single wall carbon nanotubes (SWNTs) modified gold electrodes were prepared by using two different methods. The electrochemical behavior of cytochrome c on the modified gold electrodes was investigated. The first kind of SWNT modified electrode (noted as SWNT/Au electrode) was prepared by the adsorption of carboxyl terminated SWNTs from DMF dispersion on the gold electrode. The oxidatively processed SWNT tips were covalently modified by coupling with amines (AET) to form amide linkage. Via Au—S chemical bonding, the self assembled monolayer of thiol unctionalized nanotubes on gold surface was fabricated so as to prepare the others SWNT modified electrode (noted as SWNT/AET/Au electrode). It was shown from cyclic voltammetry experiments that cytochrome c exhibited direct electrochemical responses on the both electrodes, but only the current of controlled diffusion existed on the SWNT/Au electrode while both the currents of controlled diffusion and adsorption of cytochrome c occurred on the SWNT/AET/Au electrode. Photoelastic Modulation Infared Reflection Absorption Spectroscopy (PEM IRRAS) and Quartz Crystal Microbalance (QCM) were employed to verify the adsorption of SWNTs on the gold electrodes. The results proved that SWNTs could enhance the direct electron transfer process between the electrodes and redox proteins.

Graphene oxide/multi-walled carbon nanotubes/gold nanoparticle hybridfunctionalized disposable screen-printed carbon electrode to determine Cd(II)and Pb(II)in soil

Cadmium(Cd)and lead(Pb)in soil or water environment cause the ecological destruction and environmental deterioration when their contents exceed the natural background values.To trace the concentrations of Cd(II)and Pb(II),a sensitive and selective electrode was developed using disposable screen-printed carbon electrode(SPE)immobilized with a composite film of reduced graphene oxide/carboxylation multi-walled carbon nanotubes/gold nanoparticle hybrid(RGO-MWNT-AuNP)throughπ-πbind.This highly conductive nano-composite layer,“RGO-MWNT-AuNP,”was characterized by scanning electron microscopy,UV-visible spectrometer,cyclic voltammetry,and electrochemical impedance spectroscopy.Square wave stripping voltammetry was applied to RGO-MWNT-AuNP/SPE to electroplate bismuth film and monitor the Cd(II)and Pb(II)simultaneously.To obtain high current responses,the detecting parameters were optimized.Under optimized conditions,the current responses showed a linear relationship with the concentrations of Cd(II)and Pb(II)in the range from 1.0 to 80.0μg/L with a lower detection limit of 0.7μg/L and 0.3μg/L(S/N=3),respectively.Finally,the prepared electrode was further employed to detect Cd(II)and Pb(II)in soil samples with good results.

Electrochemical detection and degradation of ibuprofen from water on multi-walled carbon nanotubes-epoxy composite electrode

This work describes the electrochemical behaviour of ibuprofen on two types of multi-walled carbon nanotubes based composite electrodes, i.e., multi-walled carbon nanotubes-epoxy （MWCNT） and silver-modified zeolite-multi-wailed carbon nanotubes-epoxy （AgZMWCNT） composites electrodes. The composite electrodes were obtained using two-roll mill procedure. SEM images of surfaces of the composites revealed a homogeneous distribution of the composite components within the epoxy matrix. AgZMWCNT composite electrode exhibited the better electrical conductivity and larger electroactive surface area. The electrochemical determination of ibuprofen （IBP） was achieved using AgZMWCNT by cyclic voltammetry, differential-pulsed voltammetry, square-wave voltammetry and chronoamperometry. The IBP degradation occurred on both composite electrodes under controlled electrolysis at 1.2 and 1.75 V vs. Ag/AgCl, and IBP concentration was determined comparatively by differential-pulsed voltammetry, under optimized conditions using AgZMWCNT electrode and UV-Vis spectrophotometry methods to determine the IBP degradation performance for each electrode. AgZMWCNT electrode exhibited a dual character allowing a double application in IBP degradation process and its control.