True-temperature inversion algorithm for a multi-wavelength pyrometer based on fractional-order particle-swarm optimization

Herein,a method of true-temperature inversion for a multi-wavelength pyrometer based on fractional-order particle-swarm optimization is proposed for difficult inversion problems with unknown emissivity.Fractional-order calculus has the inherent advantage of easily jumping out of local extreme values;here,it is introduced into the particle-swarm algorithm to invert the true temperature.An improved adaptive-adjustment mechanism is applied to automatically adjust the current velocity order of the particles and update their velocity and position values,increasing the accuracy of the true temperature values.The results of simulations using the proposed algorithm were compared with three algorithms using typical emissivity models:the internal penalty function algorithm,the optimization function(fmincon)algorithm,and the conventional particle-swarm optimization algorithm.The results show that the proposed algorithm has good accuracy for true-temperature inversion.Actual experimental results from a rocket-motor plume were used to demonstrate that the true-temperature inversion results of this algorithm are in good agreement with the theoretical true-temperature values.

The Theoretical Analysis of Multi-wavelength Pyrometer:Check and Autosearch for Emissivity General Expression

In general, the dependence of the logarithm of the emissivity upon wavelength is usually used in the treatment of data measured by multi-wavelength pyrometer. In this paper, the suitability of this expression for different materials has been examined. Further more, an effective method for automatically searching the mathematical model between emissivity and wavelength has been procsed. The calculated results show that the accuracy is improved by using this data treatment method.

Terahertz Generation Using Implanted InGaAs Photomixers and Multi-wavelength Quantum Dot Lasers

We report on a study of terahertz(THz) generation using implanted In Ga As photomixers and multi-wavelength quantum dot lasers. We carry out In Ga As materials growth, optical characterization, device design and fabrication, and photomixing experiments. This approach is capable of generating a comb of electromagnetic radiation from microwave to terahertz. For shortening photomixer carrier lifetime, we employ proton implantation into an epitaxial layer of lattice matched In Ga As grown on InP. Under a 1.55 μm multimode In GaAs/In GaAsP quantum dot laser excitation, a frequency comb with a constant frequency spacing of 50 GHz generated on the photomixer is measured, which corresponds to the beats of the laser longitudinal modes. The measurement is performed with a Fourier transform infrared spectrometer. This approach affords a convenient method to achieve a broadband multi-peak coherent THz source.

Multi-wavelength continuous-wave Nd:YVO4 self-Raman laser under in-band pumping

Multi-wavelength continuous-wave self-Raman laser with an a-cut composite YVO4/Nd:YVO4/YVO4 crystal pumped by an 879-nm wavelength-locked laser diode is demonstrated for the first time.Multi-wavelength Raman lasers at 1168.4,1176,1178.7,and 1201.6 nm are achieved by the first Stokes shift of the multi-wavelength fundamental lasers at 1064,1066.7,1073.6,1084,and 1085.6 nm with two Raman shifts of 890 and 816 cm^-1.A maximum Raman output power of 2.56 W is achieved through the use of a 20-mm-long composite crystal,with a corresponding optical conversion efficiency of 9.8%.The polarization directions of different fundamental and Raman lasers are investigated and found to be orthogonalπandσpolarizations.These orthogonally polarized multi-wavelength lasers with small wavelength separation pave the way to the development of a potential laser source for application in spectral analysis,laser radar and THz generation.

Monte-Carlo Studies and Computer Modelling of Multi-wavelength Pyrometry

Ｍｏｎｔｅ－ＣａｒｌｏＳｔｕｄｉｅｓａｎｄＣｏｍｐｕｔｅｒＭｏｄｅｌｌｉｎｇｏｆＭｕｌｔｉ－ｗａｖｅｌｅｎｇｔｈＰｙｒｏｍｅｔｒｙ￥ＰＥＩＹｕｅ；ＤＡＩＪｉｎｇｍｉｎ；ＣＨＵＺａｉｘｉａｎｇ(裴越，戴景民，褚载祥)（Ｄｅｐｔ．ｏｆＰｒｅｃｉｓｅＩｎｓｔ...

Multi-wavelength laser active coherent combination

A seed laser oscillating at different frequencies is proved to have the potential to mitigate the stimulated Brillouin scattering（SBS） effect in a fiber amplifier,which may increase the emission power of a coherent beam combination（CBC） system greatly.In this study,a basic mathematical model describing the multi-wavelength CBC is proposed on the fundamentals of CBC.A useful method for estimating the combination effect and analysing the feasibility and the validity of the multi-wavelength coherent combination is provided.In the numerical analysis,accordant results with four-wavelength four-channel CBC experiments are obtained.Through calculations of some examples with certain spectra,the unanticipated excellent combination effect with a few frequencies involved is explained,and the dependence of the combination effect on the variance of the amplifier chain length and the channel number is clarified.

Development of Multi-Wavelength Spectral-Correction Method

This investigation developed a new method for determining metal complex's property containing the stepwise real absorptivity(epsilon) and stability constant (K-m). The correction equation of the multi-wavelength spectral absorption was established for the simultaneous determination of various complexes to give high accuracy for trace analysis. This method was more acceptable in theory and simpler in operation than the classical methods.

LOW FLYING HEIGHT MEASUREMENT WITH MULTI-WAVELENGTH INTERFEROMETRY

A method for measurement of ultra-low flying height in head-disk spacing is described. Three different wavelengths are selected out from white light by filters to measure the spacing simultaneously. Besides solving the ambiguity problem, a more reliable result is achieved by using weighted average of measurement results from three different wavelengths, where the weight is dependent upon spacing. Fringe-bunching correction algorithm （FBC） and spot-tilling technique are adopted to suppress calibration and random errors. Moreover, incident bandwidth correction （IBC） method is introduced to compensate the error caused by low monochromaticity of incident light. Based on dynamic flying height tester （DFHT Ⅱ）, with the redesigned of photo-electric conversion and signal acquirement module, an instrument has been developed. And comparing the experimental data from the instrument with those from a KLA-FHT D6, the discrepancy is less than 5%. It indicates that the instrument is suitable to perform ultra-low flying height measurement and satisfies the reauirement of magnetic heads manufacturing.

HPLC多波长切换指纹图谱结合化学计量学研究白术土炒前后成分变化规律

目的 建立测定白术、土白术水溶性和脂溶性成分的高效液相色谱-二极管阵列检测器(HPLC-DAD)多波长切换指纹图谱,结合化学计量学研究白术土炒前后成分变化规律。方法 建立白术、土白术水溶性及脂溶性成分的HPLC-DAD多波长切换指纹图谱测定方法,测定17批白术和17批土白术的HPLC指纹图谱,采用相似度评价、聚类分析、OPLS-DA分析进行统计分析。结果 白术指纹图谱中共标定9个共有峰,土白术指纹图谱中共标定10个共有峰。指认了新绿原酸、绿原酸、白术内酯Ⅰ、白术内酯Ⅱ、白术内酯Ⅲ及苍术酮6个成分,土炒后1号峰、4号峰(白术内酯Ⅲ)、8号峰(白术内酯Ⅱ)峰面积增加,2号峰(新绿原酸)、3号峰(绿原酸)、5号峰、6号峰、7号峰、9号峰(白术内酯Ⅰ)、10号峰(苍术酮)土炒后峰面积均降低。结论 所建立指纹图谱方法能够系统地分析白术土炒前后化学成分的变化规律,可为进一步规范白术土炒工艺,制定土白术专属性质量标准,研究土白术炮制原理提供实验基础。

一种多波长激光器的多模式驱动研究

介绍了一种多波长半导体激光器驱动系统的设计,该系统采用了压控电流源与PicoLAS模块混合驱动的方法,具有效率高、体积小、电路简单可靠、易于系统集成等优点,为半导体激光器的驱动设计提供了一种选择和参考。

Ultra-long-period grating-based multi-wavelength ultrafast fiber laser [Invited]

We propose and demonstrate the cascaded multi-wavelength mode-locked erbium-doped fiber laser(EDFL) based on ultralong-period gratings(ULPGs) for the first time, to the best of our knowledge.Study found that the ULPG can be used as both a mode-locker for pulse shaping and a comb filter for multi-wavelength generation simultaneously.Using the dual-function of ULPG, three-, four-, five-, six-, and seven-wavelength mode-locked pulses are obtained in EDFL, seven of which are the largest number of wavelengths up to now.For the four-wavelength soliton pulses, their pulse width is about 7.8 ps.The maximum average output power and slope efficiency of these pulses are 8.4 m W and 2.03%, respectively.Besides the conventional pulses, hybrid soliton pulses composed of a four-wavelength pulse and single soliton are also observed.Finally, the effect of cavity dispersion on the multi-wavelength mode-locked pulses is also discussed.Our findings indicate that apart from common sensing and filtering, the ULPG may also possess attractive nonlinear pulse-shaping property for ultrafast photonics application.

A Raman laser system for multi-wavelength satellite laser ranging

In order to develop a laser system for multi-wavelength satellite laser ranging,the joint group of the Shanghai Astronomical Observatory and the Czech Technical University has studied the conversion efficiency of the Raman-shifting beam and its spatial characteristics.We adopted a 0.53 μm laser with pulse width of 35 ps and peak energy of 35 mJ,the second harmonic of a Nd:YAG actively and passively mode-locked laser,to pump a one-meter-long Raman tube which is full of H2 with high pressure at the Prague-based laboratory.We get the first Stokes laser (0.68 μm):7 mJ (single pulse) with beam divergence of 40" (arcsecond) and spatial wobbling of less than 4";and the first anti-Stokes laser (0.43 μm):2 mJ (single pulse) with divergence of 56" and spatial wobbling of less than 4".The emitting beam from the Raman cell also includes 0.53μm:10 mJ (single pulse) with divergence of 40" and spatial wobbling of less than 7".According to the radar link equation and based on the above on the above obtained multi-wavelength’s energy,we can estimate the detection probabilities for three colors respectivelyl.It is shown by the result that the developed multi-wavelength Raman laser system has the capability of satellite ranging.The Raman laser system will be installed at the laser station in Shanghai Astronomical Observatory to research the multi-wavelength satellite laser ranging.

Multi-wavelength fiber ring laser based on a chirped moiré fiber grating and a semiconductor optical amplifier

A simple and cost-effective multi-wavelength fiber ring laser based on a chirped Moire fiber grating （CMFG） and a semiconductor optical amplifier （SOA） is proposed. Stable triple-wavelength lasing oscillations at room temperature are experimentally demonstrated. The measured optical signal-to-noise ratio （SNR） reaches the highest value of 50 dB and the power fluctuation of each wavelength is less than 0.2 dB within a 1-h period. To serve as a wavelength selective element, the CMFG possesses excellent comb-like filtering characteristics including stable wavelength interval and ultra-narrow passband, and its fabrication method is easy and flexible. The lasing oscillation shows a narrower bandwidth than SOA-based multi-wavelength fiber lasers utilizing some other kinds of wavelength selective components. Methods to optimize the laser performance are also discussed.

New Solution to Surface Temperature of Casting Slab Measurement Based on Preceded Reflector and Multi-Wavelength

The surface temperature of casting slab is an important parameter in the metallurgy field. Because the surface emissivity is uncertain and also unknown, it is difficult to measure the slab surface temperature accurately. A method based on preceded reflector and multi-wavelength was put forward to deal with the difficulty in surface temperature measurement of casting slab. On the premise of preceded reflector and non-preceded reflector, the method establishes the radiation energy equations and works out the emissivity and temperature in the equations. Also, the multilayer modeling of casting slab surface and multiple reflection-absorption process modeling were built by Monte Carlo method. The temperature measuring method had been applied in the continuous casting field. In order to verify the measured result, the thermal imaging method was adopted when the slab surface emissivity was set by repeated tests. Finally, the measured and verified temperature curves keep a same tendency and the error of the values is lower than 5℃. The comparison result shows that the method can measure temperature accurately.

烟叶异物检测系统的设计及应用

烟叶生产过程中非烟异物检测非常重要。介绍了目前几种主要的异物检测手段,并针对这些检测手段存在的不足,设计一种近红外多波长异物检测系统。对13种异物的多次检测结果表明,该系统能够有效检测出烟叶中的异物,具有灵敏度高、速度快及成本低等优点。

Multi-wavelength erbium-doped fiber laser using four-wave mixing effect in doped fiber

We demonstrate a multi-wavelength erbium-doped fiber laser （EDFL） using erbium gain and four-wave mixing （FWM） effect in a piece of erbium-doped fiber （EDF） with high erbium ion concentration. The EDF has a pump absorption rate of 24.6 dB/m at 979 nm and is bi-directionally pumped by 980-nm laser diodes. FWM effect redistributes the energy of different oscillating lines and causes multi-wavelength operation. The laser generates more than 22 lines of optical comb with a line spacing of approximately 0.10 nm at the 1569-nm region using only 1.5-m-long EDF.

Coupling length variation and multi-wavelength demultiplexing in photonic crystal waveguides

In this Letter, the effects of material/structure parameters of photonic crystal（Ph C） parallel waveguides on the coupling length are investigated. The results show that, increasing the effective relative permittivity of the Ph C leads to a downward shift of the photonic bandgap and a variation of the coupling length. A compact Ph C 1.31/1.55 μm wavelength division multiplexer（WDM）/demultiplexer with simple structure is proposed,where the output power ratios are more than 24 d B. This WDM can multiplex/demultiplex other light waves efficiently.

Fiber laser with simultaneous multi-wavelength Er/Yb passively Q-switched and single-wavelength Tm gain-switched operations

We report the experimental investigation of an all-fiber multi-wavelength passively Q-switched Er/Yb laser with simultaneous gain-switched pulsed operation by using a thulium-doped fiber as a saturable absorber.Laser emission is obtained in three wavelength regions with central peaks at around 1546 nm, 1561 nm, and1862 nm. Multi-wavelength emission with separation of approximately 1 nm is obtained around the wavelength regions of 1546 nm and 1561 nm. Stable laser pulses are generated in the pump power range from 3.6 W to7.3 W.

An improved calculation method for fiber Raman amplifier equations with multi-wavelength pumping

A novel numerical method for fiber Raman amplifier (FRA) from standard propagation equations is presented and derived based on the one-step method for ordinary differential equation (ODE). The proposed algorithm is effective in solving FRA equations including all the interactions among pumps, signals, and noises. Applications of the numerical analysis to practical FRA-based systems show a great reduction in computation time in comparison with the average power method and the fourth-order Runge-Kutta (RK) method, under the same condition. Also the proposed method can decrease the computing time over three orders of magnitude with excellent accuracy promises in comparison with the direct integration method.

基于真实科研问题的“物理光学”教学改进探究——以“基于偏振干涉的多波长光纤激光器”为例

在新时代人才培养需求的指导下,文章分析了传统“物理光学”课程教学现状,研究将知识点与案例结合的项目式教学改进方法,以在研国家和北京市科研项目中凝练的“基于偏振干涉的多波长光纤激光器”这一真实科学问题为例,通过实物演示、模型建立和实验对比验证介绍科研方法和思路的同时,讲解偏振光产生、调节、琼斯矩阵和偏振干涉等内容,加强基础知识学习,培养学生灵活应用基础知识解决问题的工程实践能力和创新意识。