True-temperature inversion algorithm for a multi-wavelength pyrometer based on fractional-order particle-swarm optimization

Herein,a method of true-temperature inversion for a multi-wavelength pyrometer based on fractional-order particle-swarm optimization is proposed for difficult inversion problems with unknown emissivity.Fractional-order calculus has the inherent advantage of easily jumping out of local extreme values;here,it is introduced into the particle-swarm algorithm to invert the true temperature.An improved adaptive-adjustment mechanism is applied to automatically adjust the current velocity order of the particles and update their velocity and position values,increasing the accuracy of the true temperature values.The results of simulations using the proposed algorithm were compared with three algorithms using typical emissivity models:the internal penalty function algorithm,the optimization function(fmincon)algorithm,and the conventional particle-swarm optimization algorithm.The results show that the proposed algorithm has good accuracy for true-temperature inversion.Actual experimental results from a rocket-motor plume were used to demonstrate that the true-temperature inversion results of this algorithm are in good agreement with the theoretical true-temperature values.

The Theoretical Analysis of Multi-wavelength Pyrometer:Check and Autosearch for Emissivity General Expression

In general, the dependence of the logarithm of the emissivity upon wavelength is usually used in the treatment of data measured by multi-wavelength pyrometer. In this paper, the suitability of this expression for different materials has been examined. Further more, an effective method for automatically searching the mathematical model between emissivity and wavelength has been procsed. The calculated results show that the accuracy is improved by using this data treatment method.

Terahertz Generation Using Implanted InGaAs Photomixers and Multi-wavelength Quantum Dot Lasers

We report on a study of terahertz(THz) generation using implanted In Ga As photomixers and multi-wavelength quantum dot lasers. We carry out In Ga As materials growth, optical characterization, device design and fabrication, and photomixing experiments. This approach is capable of generating a comb of electromagnetic radiation from microwave to terahertz. For shortening photomixer carrier lifetime, we employ proton implantation into an epitaxial layer of lattice matched In Ga As grown on InP. Under a 1.55 μm multimode In GaAs/In GaAsP quantum dot laser excitation, a frequency comb with a constant frequency spacing of 50 GHz generated on the photomixer is measured, which corresponds to the beats of the laser longitudinal modes. The measurement is performed with a Fourier transform infrared spectrometer. This approach affords a convenient method to achieve a broadband multi-peak coherent THz source.

Multi-wavelength continuous-wave Nd:YVO4 self-Raman laser under in-band pumping

Multi-wavelength continuous-wave self-Raman laser with an a-cut composite YVO4/Nd:YVO4/YVO4 crystal pumped by an 879-nm wavelength-locked laser diode is demonstrated for the first time.Multi-wavelength Raman lasers at 1168.4,1176,1178.7,and 1201.6 nm are achieved by the first Stokes shift of the multi-wavelength fundamental lasers at 1064,1066.7,1073.6,1084,and 1085.6 nm with two Raman shifts of 890 and 816 cm^-1.A maximum Raman output power of 2.56 W is achieved through the use of a 20-mm-long composite crystal,with a corresponding optical conversion efficiency of 9.8%.The polarization directions of different fundamental and Raman lasers are investigated and found to be orthogonalπandσpolarizations.These orthogonally polarized multi-wavelength lasers with small wavelength separation pave the way to the development of a potential laser source for application in spectral analysis,laser radar and THz generation.

Development of Multi-Wavelength Spectral-Correction Method

This investigation developed a new method for determining metal complex's property containing the stepwise real absorptivity(epsilon) and stability constant (K-m). The correction equation of the multi-wavelength spectral absorption was established for the simultaneous determination of various complexes to give high accuracy for trace analysis. This method was more acceptable in theory and simpler in operation than the classical methods.

LOW FLYING HEIGHT MEASUREMENT WITH MULTI-WAVELENGTH INTERFEROMETRY

A method for measurement of ultra-low flying height in head-disk spacing is described. Three different wavelengths are selected out from white light by filters to measure the spacing simultaneously. Besides solving the ambiguity problem, a more reliable result is achieved by using weighted average of measurement results from three different wavelengths, where the weight is dependent upon spacing. Fringe-bunching correction algorithm （FBC） and spot-tilling technique are adopted to suppress calibration and random errors. Moreover, incident bandwidth correction （IBC） method is introduced to compensate the error caused by low monochromaticity of incident light. Based on dynamic flying height tester （DFHT Ⅱ）, with the redesigned of photo-electric conversion and signal acquirement module, an instrument has been developed. And comparing the experimental data from the instrument with those from a KLA-FHT D6, the discrepancy is less than 5%. It indicates that the instrument is suitable to perform ultra-low flying height measurement and satisfies the reauirement of magnetic heads manufacturing.

Monte-Carlo Studies and Computer Modelling of Multi-wavelength Pyrometry

Ｍｏｎｔｅ－ＣａｒｌｏＳｔｕｄｉｅｓａｎｄＣｏｍｐｕｔｅｒＭｏｄｅｌｌｉｎｇｏｆＭｕｌｔｉ－ｗａｖｅｌｅｎｇｔｈＰｙｒｏｍｅｔｒｙ￥ＰＥＩＹｕｅ；ＤＡＩＪｉｎｇｍｉｎ；ＣＨＵＺａｉｘｉａｎｇ(裴越，戴景民，褚载祥)（Ｄｅｐｔ．ｏｆＰｒｅｃｉｓｅＩｎｓｔ...

Multi-wavelength laser active coherent combination

A seed laser oscillating at different frequencies is proved to have the potential to mitigate the stimulated Brillouin scattering（SBS） effect in a fiber amplifier,which may increase the emission power of a coherent beam combination（CBC） system greatly.In this study,a basic mathematical model describing the multi-wavelength CBC is proposed on the fundamentals of CBC.A useful method for estimating the combination effect and analysing the feasibility and the validity of the multi-wavelength coherent combination is provided.In the numerical analysis,accordant results with four-wavelength four-channel CBC experiments are obtained.Through calculations of some examples with certain spectra,the unanticipated excellent combination effect with a few frequencies involved is explained,and the dependence of the combination effect on the variance of the amplifier chain length and the channel number is clarified.

Switching,explosion,and chaos of multi-wavelength soliton states in ultrafast fiber lasers

Because of the complexity and difficulty of realizing a multi-wavelength soliton state,reports on its internal dynamic characteristics are scarce.In this study,the switching and periodic soliton explosion processes of the multi-wavelength soliton state in a negative dispersion passively mode-locked fiber laser are realized.The generation of the multi-wavelength soliton state undergoes the process of noise,oscillation,and stable mode-locking,and the splitting and annihilation of solitons with different group velocities directly impact the generation and disappearance of three wavelengths.Positive and negative dispersion lead to different group velocities of solitons.The presence and displacement of solitons with different group velocities cause soliton collisions,which lead to soliton explosions.A soliton experiences relative phase oscillation,chaos,and oscillation,as well as convergence and separation before and after an explosion.With an increase in parameters related to pump power,single-soliton oscillation,multi-wavelength solitons,and chaos are found in experiments and simulations,proving the relevance and reliability between simulation and experimental results.This work promotes the dynamical study of multi-soliton collisions in nonlinear science and the development of chaos theory in multi-comb lasers.

Large-field objective lens for multi-wavelength microscopy at mesoscale and submicron resolution

Conventional microscopes designed for submicron resolution in biological research are hindered by a limited field of view,typically around 1 mm.This restriction poses a challenge when attempting to simultaneously analyze various parts of a sample,such as different brain areas.In addition,conventional objective lenses struggle to perform consistently across the required range of wavelengths for brain imaging in vivo.Here we present a novel mesoscopic objective lens with an impressive field of view of 8 mm,a numerical aperture of 0.5,and a working wavelength range from 400 to 1000 nm.We achieved a resolution of 0.74μm in fluorescent beads imaging.The versatility of this lens was further demonstrated through high-quality images of mouse brain and kidney sections in a wide-field imaging system,a confocal laser scanning system,and a two-photon imaging system.This mesoscopic objective lens holds immense promise for advancing multi-wavelength imaging of large fields of view at high resolution.

中国不同地区气溶胶消光特性分析(英文)

The multi-wavelength aerosol optical depths and the Angstrom exponent between 450 nm and 900 nm in four locations of China (Miyun, Beijing; Xinfeng, Guangdong; Waliguan, Qinghai and Damxung, Tibet) have been observed by sun-photometers. This paper analyzes their characteristics for a one-year period from February 1998 to January 1999. The results show that in the arid and semi-arid locations like Miyun (117.12°E, 40.65°N) and Waliguan (100.90°E, 36.29°N), there is a maximum of aerosol optical depth in the spring, it is about twice as large as in any other season. In a humid region like Xinfeng (114.2“E, 24.5°N), the aerosol optical depth also has a maximum in the spring, however it is only slightly larger than in other seasons. The Angstrom exponent shows a significant minimum at Waliguan in spring, about 0.15, indicating relatively large dust aerosol particles. Large variability of the monthly mean Angstrom exponent is also found in Miyun and Xinfeng, but there is no tendency with seasons. It means that the source of aerosol in these locations is complicated.

Assessment of column aerosol optical properties using ground-based sun-photometer at urban Harbin, Northeast China

Aerosol plays a key role in determining radiative balance, regional climate and human health.Severe air pollution over Northeast China in recent years urges more comprehensive studies to figure out the adverse effects caused by excessive aerosols. In this study, column aerosol measurements over urban Harbin, a metropolis located at the highest latitude in Northeast China, during May 2016 to March 2017 were conducted using a CIMEL sun-photometer to analyze local aerosol properties and its variation from different aspects. According to the observations, aerosol optical depth at 440 nm（AOD_（440）） ranges from 0.07 up to 1.54, and the large variability in both AOD_（440） and Angstrom Exponent（AE_（440–870）） indicates the frequent change of aerosol types due of different emission sources. Coarse mode particles dominated Harbin during the studying period because of the long-range transported dust and probably the suspended snow crystals in winter. As the wavelength increases, relatively consistent decrease trends of single scattering albedo（SSA） and asymmetry factor（ASY） were observed in spring, autumn, and winter, indicating the presence of absorbing polluted aerosols. Mixed type（MIX） aerosol dominated the study region with a total percentage of 34%, and biomass burning and urban industry（BB/UI）, clean continental（CC）, and desert dust（DD） aerosols were found to be 31%, 27%, and 8%, respectively. The current work fills up the optical characteristics of aerosols in Harbin, and will contribute to the in-depth understanding of local aerosol variation and regional climate change over Northeast China.

Enhancement of MAD/MIR phasing at low resolution and a new procedure for automatic phase extension

To achieve de novo protein structure determination of challenging cases, multi-wavelength anomalous diffraction(MAD) and multiple isomorphous replacement(MIR) phasing can be powerful tools to obtain low-resolution initial phases from heavy-atom derivative datasets, then phase extension is needed against high-resolution data to obtain accurate structures.In this context, we propose a direct-methods procedure here that could improve the initial low-resolution MAD/MIR phase quality.And accordingly, an automated process for extending initial phases to high resolution is also described.These two procedures are both implanted in the newly released IPCAS pipeline.Three cases are used to perform the test, including one set of 4.17 ? MAD data from a membrane protein and two sets of MAD/MIR data with derivatives truncated down to 6.80 ? and 6.90 ?, respectively.All the results have shown that the initial phases generated from the direct-methods procedure are better than that from the conventional MAD/MIR methods.The automated phase extensions for the latter two cases starting from 6.80 ? to 3.00 ? and 6.90 ? to 2.80 ? are proved to be successful, leading to complete models.This may provide convenient and reliable tools for phase improvement and phase extension in difficult low-resolution tasks.

Noise Reduction in White Light Lidar Signal Using a One-Dim and Two-Dim Daubechies Wavelet Shrinkage Method

A 1-D and 2-D Daubechies 5 (db5) discrete wavelet shrinkage methods using a 10 level decomposition was applied to white light lidar data particularly at 350 nm and 550 nm backscattered signal. At 350 nm, the backscattered signal is very weak as compared to 550 nm backscattered signal because of the spectral intensity distribution of the generated white light. The 1-D and 2-D wavelet shrinkage method gave a much better result as compared with the moving average method. However, the 2-D wavelet shrinkage method produced a much better denoised lidar signal compared with the 1-D wavelet shrinkage method. This is indicated by the 142% increase in correlation coefficient between the 2-D denoised lidar signal and the 800 nm original lidar signal as compared with only 12% increase in correlation coefficient for the 1-D denoised lidar signal. The 2-D wavelet shrinkage method also gave a much higher SNR value of 65.9 compared to 1-D which is 38.8.

Fiber laser with simultaneous multi-wavelength Er/Yb passively Q-switched and single-wavelength Tm gain-switched operations

We report the experimental investigation of an all-fiber multi-wavelength passively Q-switched Er/Yb laser with simultaneous gain-switched pulsed operation by using a thulium-doped fiber as a saturable absorber.Laser emission is obtained in three wavelength regions with central peaks at around 1546 nm, 1561 nm, and1862 nm. Multi-wavelength emission with separation of approximately 1 nm is obtained around the wavelength regions of 1546 nm and 1561 nm. Stable laser pulses are generated in the pump power range from 3.6 W to7.3 W.

Ultra-long-period grating-based multi-wavelength ultrafast fiber laser [Invited]

We propose and demonstrate the cascaded multi-wavelength mode-locked erbium-doped fiber laser(EDFL) based on ultralong-period gratings(ULPGs) for the first time, to the best of our knowledge.Study found that the ULPG can be used as both a mode-locker for pulse shaping and a comb filter for multi-wavelength generation simultaneously.Using the dual-function of ULPG, three-, four-, five-, six-, and seven-wavelength mode-locked pulses are obtained in EDFL, seven of which are the largest number of wavelengths up to now.For the four-wavelength soliton pulses, their pulse width is about 7.8 ps.The maximum average output power and slope efficiency of these pulses are 8.4 m W and 2.03%, respectively.Besides the conventional pulses, hybrid soliton pulses composed of a four-wavelength pulse and single soliton are also observed.Finally, the effect of cavity dispersion on the multi-wavelength mode-locked pulses is also discussed.Our findings indicate that apart from common sensing and filtering, the ULPG may also possess attractive nonlinear pulse-shaping property for ultrafast photonics application.

New Solution to Surface Temperature of Casting Slab Measurement Based on Preceded Reflector and Multi-Wavelength

The surface temperature of casting slab is an important parameter in the metallurgy field. Because the surface emissivity is uncertain and also unknown, it is difficult to measure the slab surface temperature accurately. A method based on preceded reflector and multi-wavelength was put forward to deal with the difficulty in surface temperature measurement of casting slab. On the premise of preceded reflector and non-preceded reflector, the method establishes the radiation energy equations and works out the emissivity and temperature in the equations. Also, the multilayer modeling of casting slab surface and multiple reflection-absorption process modeling were built by Monte Carlo method. The temperature measuring method had been applied in the continuous casting field. In order to verify the measured result, the thermal imaging method was adopted when the slab surface emissivity was set by repeated tests. Finally, the measured and verified temperature curves keep a same tendency and the error of the values is lower than 5℃. The comparison result shows that the method can measure temperature accurately.

A Raman laser system for multi-wavelength satellite laser ranging

In order to develop a laser system for multi-wavelength satellite laser ranging,the joint group of the Shanghai Astronomical Observatory and the Czech Technical University has studied the conversion efficiency of the Raman-shifting beam and its spatial characteristics.We adopted a 0.53 μm laser with pulse width of 35 ps and peak energy of 35 mJ,the second harmonic of a Nd:YAG actively and passively mode-locked laser,to pump a one-meter-long Raman tube which is full of H2 with high pressure at the Prague-based laboratory.We get the first Stokes laser (0.68 μm):7 mJ (single pulse) with beam divergence of 40" (arcsecond) and spatial wobbling of less than 4";and the first anti-Stokes laser (0.43 μm):2 mJ (single pulse) with divergence of 56" and spatial wobbling of less than 4".The emitting beam from the Raman cell also includes 0.53μm:10 mJ (single pulse) with divergence of 40" and spatial wobbling of less than 7".According to the radar link equation and based on the above on the above obtained multi-wavelength’s energy,we can estimate the detection probabilities for three colors respectivelyl.It is shown by the result that the developed multi-wavelength Raman laser system has the capability of satellite ranging.The Raman laser system will be installed at the laser station in Shanghai Astronomical Observatory to research the multi-wavelength satellite laser ranging.

First-Stokes and second-Stokes multi-wavelength continuous-wave operation in Nd:YVO4/BaWO4 Raman laser under in-band pumping

A continuous-wave Nd:YVO4/BaWO4 Raman laser generating simultaneous multi-wavelength first-Stokes and second-Stokes emissions is demonstrated for the first time, to the best of our knowledge. Investigations concerning different pump spot sizes and crystal lengths were conducted to improve the thermal effect and pump absorption. Three first-Stokes lasers at 1103.6, 1175.9, and 1180.7 nm and two second-Stokes lasers at 1145.7 and 1228.9 nm are obtained simultaneously using the Raman shifts of 925 cm-1 and 332 cm-1 in BaWO4 and 890 cm-1 in YVO4. At the incident pump power of 23.1 W, 1.24 W maximum Raman output power is achieved,corresponding to an optical conversion efficiency of 5.4%. We also present a theoretical analysis of the competition between different Stokes lines.

Multi-Wavelength Ultra-Weak Fiber Bragg Grating Arrays for Long-Distance Quasi-Distributed Sensing

Fiber Bragg grating(FBG)array,consisting of a number of sensing units in a single optical fiber,can be practically applied in quasi-distributed sensing networks.Serious signal crosstalk occurring between large-serial of identical FBGs,however,has limited the further increase in the number of sensing units,thus restricting applications only for short-distance sensing networks.To reduce the signal crosstalk,we design two novel types of 10-kilometer-long FBG arrays with 10000 equally spaced gratings,written on-line using a customized grating inscription system,which is affiliated to a drawing tower.Main factors causing signal crosstalk,such as spectral shadowing and multiple reflections,are firstly investigated in theory.Consistent with the theoretical findings,experimental results are proving that ultra-weak(the reflectivity of—40 dB)and multi-wavelength gratings of a number more than 10000 can be readily identified,with satisfied low crosstalk.The maximum attenuation of grating signal and minimum signal-to-noise ratio(SNR)in a single-wavelength array are 10.69 dB and 5.62 dB,respectively.As a comparison,by increasing the number of central wavelengths to three,the attenuation can be effectively reduced to 5.54dB and the minimum SNR has been improved to 8.14 dB.The current study significantly enhances the multiplexing capacity of FBG arrays and demonstrates promising potentials for establishing large-capacity quasi-distributed sensing networks.