The building of a large-scale external-target experiment, abbreviated as CEE, in the cooling storage ring at the Heavy Ion Research Facility in Lanzhou has been planned. The CEE is a multi-purpose spectrometer that wi...The building of a large-scale external-target experiment, abbreviated as CEE, in the cooling storage ring at the Heavy Ion Research Facility in Lanzhou has been planned. The CEE is a multi-purpose spectrometer that will be used for various studies on heavy-ion collisions. A multi-wire drift chamber(MWDC) array is the forward tracking detector of the CEE. In this work, GEANT4 simulations were performed for the MWDC forward tracking array with a focus on the track reconstruction algorithm. Combined with the time of flight information,particle identification is achieved. The residue is about 30 μm, while the tracking efficiency is higher than 90%with the current redundancy. In addition, a prototype of the forward tracking system using three MWDCs was assembled and tested using a high-energy proton beam. The firing efficiency of the detector and the reconstruction accuracy of the prototype were derived. The track residue for the protons at about 400 MeV/c is better than 300 μm, meeting the requirements of the CEE. Suggestions for improving the performance of the forward tracking system are given.展开更多
In order to identify heavier elements, we have developed a new longitudinal field gas ionization chamber (IC)with an angle of 30° of plate (as shown in Fig.1). The IC is operated in flowing iso-butane gas at a pr...In order to identify heavier elements, we have developed a new longitudinal field gas ionization chamber (IC)with an angle of 30° of plate (as shown in Fig.1). The IC is operated in flowing iso-butane gas at a pressure of 10kPa. After testing by using a 3- component α particle source and comparing with the old longitudinal展开更多
The design principle for a multi-wire proportional chamber with a cathode strip and delay-line readout is described. A prototype chamber of a size of 10 cm×10 cm was made together with the readout electronics cir...The design principle for a multi-wire proportional chamber with a cathode strip and delay-line readout is described. A prototype chamber of a size of 10 cm×10 cm was made together with the readout electronics circuit. A very clean signal with very low background noise was obtained by applying a transformer between the delay-line and the pre-amplifier in order to match the resistance. Along the anode wire direction a position resolution of less than 0.5 mm was achieved with a ^55Fe-5.9 keV X ray source. The simple structure, large effective area and high position resolution allow the application of a gas chamber of this kind to many purposes.展开更多
基金supported by the National Basic Research Program of China(973)(No.2015CB856903)the National Science Foundation of China(No.U1332207)
文摘The building of a large-scale external-target experiment, abbreviated as CEE, in the cooling storage ring at the Heavy Ion Research Facility in Lanzhou has been planned. The CEE is a multi-purpose spectrometer that will be used for various studies on heavy-ion collisions. A multi-wire drift chamber(MWDC) array is the forward tracking detector of the CEE. In this work, GEANT4 simulations were performed for the MWDC forward tracking array with a focus on the track reconstruction algorithm. Combined with the time of flight information,particle identification is achieved. The residue is about 30 μm, while the tracking efficiency is higher than 90%with the current redundancy. In addition, a prototype of the forward tracking system using three MWDCs was assembled and tested using a high-energy proton beam. The firing efficiency of the detector and the reconstruction accuracy of the prototype were derived. The track residue for the protons at about 400 MeV/c is better than 300 μm, meeting the requirements of the CEE. Suggestions for improving the performance of the forward tracking system are given.
文摘In order to identify heavier elements, we have developed a new longitudinal field gas ionization chamber (IC)with an angle of 30° of plate (as shown in Fig.1). The IC is operated in flowing iso-butane gas at a pressure of 10kPa. After testing by using a 3- component α particle source and comparing with the old longitudinal
基金Major State Basic Research Development Program of China (2007CB815002)NSFC (10775003, 10827505)
文摘The design principle for a multi-wire proportional chamber with a cathode strip and delay-line readout is described. A prototype chamber of a size of 10 cm×10 cm was made together with the readout electronics circuit. A very clean signal with very low background noise was obtained by applying a transformer between the delay-line and the pre-amplifier in order to match the resistance. Along the anode wire direction a position resolution of less than 0.5 mm was achieved with a ^55Fe-5.9 keV X ray source. The simple structure, large effective area and high position resolution allow the application of a gas chamber of this kind to many purposes.
