Multifunctional AlPO_(4)reconstructed LiMn_(2)O_(4)surface for electrochemical lithium extraction from brine

LiMn_(2)O_(4)(LMO)electrochemical lithium-ion pump has gained widespread attention due to its green,high efficiency,and low energy consumption in selectively extracting lithium from brine.However,collapse of crystal structure and loss of lithium extraction capacity caused by Mn dissolution loss limits its industrialized application.Hence,a multifunctional coating was developed by depositing amorphous AlPO_(4)on the surface of LMO using sol-gel method.The characterization and electrochemical performance test provided insights into the mechanism of Li^(+)embedment and de-embedment and revealed that multifunctional AlPO_(4)can reconstruct the physical and chemical state of LMO surface to improve the interface hydrophilicity,promote the transport of Li^(+),strengthen cycle stability.Remarkably,after 20 cycles,the capacity retention rate of 0.5AP-LMO reached 93.6%with only 0.147%Mn dissolution loss.The average Li^(+)release capacity of 0.5AP-LMO//Ag system in simulated brine is 28.77 mg/(g h),which is 90.4%higher than LMO.Encouragingly,even in the more complex Zabuye real brine,0.5AP-LMO//Ag can still maintain excellent lithium extraction performance.These results indicate that the 0.5AP-LMO//Ag lithium-ion pump shows promising potential as a Li^(+)selective extraction system.

Adhesion-enhancing coating embedded with osteogenesis-promoting PDA/HA nanoparticles for peri-implant soft tissue sealing and osseointegration

Following dental implantation,the characteristic bacterial milieu of the oral cavity may lead to peri-implant inflammation,which can negatively impact osseointegration and cause implant failure.To improve soft tissue sealing around the implant,enhance osseointegration,and improve implant success rates,this paper proposes a composite multifunctional coating(PHG)prepared using gelatin and polydopamine/hydroxyapatite nanoparticles,investigates the effects of this novel coating on cell adhesion,proliferation,antibacterial activity,osteogenic differentiation,and evaluates its immune-related properties.The PHG coating was proved to have satisfactory hydrophilicity and wettability for cell attachment.Furthermore,it improved the expression of adhesion-related genes and proteins in human gingival fibroblasts,indicating its adhesion-promoting effect.Additionally,bone marrow mesenchymal stem cells exhibited strong osteogenic differentiation potential and mineralization on PHG-coated surfaces.Notably,the PHG coating exhibited antibacterial activity against Streptococcus mutans,as well as anti-inflammatory effects,potentially via the regulation of macrophages.Therefore,the proposed PHG coating may promote soft tissue sealing and bone bonding,providing a potential strategy for the surface modification of dental implants.

Simple and scalable synthesis of super-repellent multilayer nanocomposite coating on Mg alloy with mechanochemical robustness,high-temperature endurance and electric protection

Multi-functionalization is the future development direction for protective coatings on metal surface,but has not yet been explored a lot.The effective integration of multiple functions into one material remains a huge challenge.Herein,a superhydrophobic multilayer coating integrated with multidimensional organic-inorganic components is designed on magnesium alloy via one-step plasma-induced thermal field assisted crosslinking deposition(PTCD)processing followed by after-thermal modification.Hard porous MgO ceramic layer and polytetrafluoroethylene(PTFE)nano-particles work as the bottom layer skeleton and filler components separately,forming an organic-inorganic multilayer structure,in which organic nano-particles can be crosslinked and cured to form a compact polymer-like outer layer with hierarchical surface textures.Remarkably,the chemical robustness after prolonged exposure to aqua regia,strong base and simulated seawater solution profits from polymer-like nanocomposite layer uniformly and compactly across the film bulk.Moreover,the self-similar multilayer structure coating endows it attractive functions of strong mechanical robustness(>100th cyclic rotary abrasion),stable and ultra-low friction coefficient(about 0.084),high-temperature endurance,and robust self-cleaning.The organic-inorganic multilayer coating also exhibits high insulating property with breakdown voltage of 1351.8±42.4 V,dielectric strength of 21.4±0.7 V/μm and resistivity of 3.2×10^(10)Ω·cm.The excellent multifunction benefits from ceramic bottom skeleton,the assembly and deposition of multidimensional nano-particles,and the synergistic effect of organic inorganic components.This study paves the way for designing next generation protective coating on magnesium alloy with great potential for multifunctional applications.

Zincophilic Ti_(3)C_(2)Cl_(2)MXene and anti-corrosive Cu NPs for synergistically regulated deposition of dendrite-free Zn metal anode

Dendrites growth,chemical corrosion,and hydrogen evolution reaction(HER)on zinc anodes are the main barriers for the development of aqueous zinc-ion batteries(AZIBs).Constructing interfacial protec-tive layer is an effective way to alleviate the side reactions on the anodes.Herein,Cu/Ti_(3)C_(2)Cl_(2)MXene(CMX)with high zincophilic and hydrophobic property is prepared by the lewis molten salts etching method,and the CMX interface protection layer is constructed by a simple spin coating.The CMX coat-ing layer can provide abundant nucleation sites and uniformize the charge distribution through the zin-cophilic Ti_(3)C_(2)Cl_(2)MXene matrix,leading to homogenous Zn deposition.In addition,the hydrophobic coat-ing contained anti-corrosive Cu nanoparticles can prevent the Zn anode from the electrolyte,beneficial for suppressing the chemical corrosion and HER.Therefore,the stable and reversible Zn plating/stripping is achieved for the Zn anode coated by the CMX,which exhibits the lifespan of over 1400 h at 0.5 mA cm^(−2),and even can steadily run for 700 h with 65 mV at 10 mA cm^(−2).Furthermore,CMX@Zn shows a high coulombic efficiency of over 100%for 3800 cycles,which indicates that the CMX@Zn electrode has excellent stability and reversibility of Zn stripping/plating.The full batteries assembled with ZnCoMnO/C(ZCM)cathodes also exhibits higher capacity(450.6 mAh g^(−1)at 0.1 A g^(−1))and cycle stability(capacity retention of 70%after 1500 cycles).This work enhanced the lifespan of AZIBs and broaden the research of multifunctional coating layer to other secondary batteries based on metal anodes.

Improved thermochromic and photocatalytic activities of F-VO_(2)/ Nb-TiO_(2) multifunctional coating films

Multifunctional photocatalytic and thermochromic composites consisting of fluorine-doped vanadium dioxide(F-VO_(2))and niobium-doped TiO_(2)(NTO)were prepared by a simple physical mixing.The composites exhibited a higher thermochromic activity and nitrogen oxide(NO_(x))decomposition activity than that of pristine VO_(2)/NTO.Both VO_(2) and NTO materials were synthesized using an environmentally friendly soft chemical solvothermal/hydrothermal process,which produced NTO nanoparticles with a controllable morphology and particle size by changing the ratio of ethanol and acetic acid sol-vent.F-VO_(2)/NTO showed a better multifunctionality of thermochromic and photocatalytic activities than those of VO_(2)/NTO samples.The coexistence coating films showed a better effect on thermochromic and deNO_(x)(NO_(x) reduction)activity than those of double-sided films for F-VO_(2)/NTO samples.The best thermochromic and photocatalytic activities obtained from sample F-VO_(2)/NTO 60 showed the ΔT_(1500 nm)[difference of transmittance(ΔT)at the wavelength of 1500 nm under 25°C and 95°C]of up to 29.5%and deNO_(x) activity of up to 40%at λ>290 nm under mercury lamp irradiation.The use of F-VO_(2)/NTO coexistence coating films showed the appropriateness for multifunctional materials.

Corrosion Resistance and Antifouling Bioinspired Coating with Doped Polyaniline and TO@CA Self-Healing Nanocapsules

In this study,an integrative bioinspired coating system for antifouling and corrosion resistance was investigated,in which self-healing nanocapsules(tung oil calcium alginate,TO@CA),doped polyaniline and nano-titanium dioxide nanocomposites(SPAn–TiO_(2))and a biostructure metal surface were combined.The antifouling property of the bioinspired coating resulted from the synergistic antifouling effect of nano-TiO_(2)and acid-doped polyaniline in SPAn–TiO_(2).The protonated nitrogen with a positive charge in SPAn–TiO_(2)and the intrinsic bactericidal property of nano-TiO_(2)could damage negatively charged single-celled chlorella,endowing the composite coating with good antifouling performance(less algae attached on the surfaces after a 90-day antifouling test and a conductivity test).The composite bioinspired coating had excellent corrosion resistance,which was due to the good synergistic anticorrosion barrier effect of SPAn–TiO_(2)with TO@CA nanocapsules and the repairing ability of microcracks of TO@CA nanocapsules during the corrosion process.The bioinspired coating with 2 wt%SPAn–TiO_(2)and 2 wt%TO@CA nanocapsules exhibited a better adhesion,corrosion resistance and antifouling performance than the other coatings did.

A trilogy antimicrobial strategy for multiple infections of orthopedic implants throughout their life cycle

Bacteria-associated infection represents one of the major threats for orthopedic implants failure during their life cycles.However,ordinary antimicrobial treatments usually failed to combat multiple waves of infections during arthroplasty and prosthesis revisions etc.As these incidents could easily introduce new microbial pathogens in/onto the implants.Herein,we demonstrate that an antimicrobial trilogy strategy incorporating a sophisticated multilayered coating system leveraging multiple ion exchange mechanisms and fine nanotopography tuning,could effectively eradicate bacterial infection at various stages of implantation.Early stage bacteriostatic effect was realized via nano-topological structure of top mineral coating.Antibacterial effect at intermediate stage was mediated by sustained release of zinc ions from doped CaP coating.Strong antibacterial potency was validated at 4 weeks post implantation via an implanted model in vivo.Finally,the underlying zinc titanate fiber network enabled a long-term contact and release effect of residual zinc,which maintained a strong antibacterial ability against both Staphylococcus aureus and Escherichia coli even after the removal of top layer coating.Moreover,sustained release of Sr2+and Zn2+during CaP coating degradation substantially promoted implant osseointegration even under an infectious environment by showing more peri-implant new bone formation and substantially improved bone-implant bonding strength.