Toughening mechanism of lined Al_2O_3-ZrO_2 multiphaseceramics in SHS composite pipes

Hypoeutectic and hypereutectic Al2O3-ZrO2 multiphase ceramics-lined composite pipes were produced by using the gravitational separation self-propagate high-temperature synthesis （SHS） process. The microstructure of the ceramics was observed by means of SEM and EPMA. The fracture toughness of the multiphase ceramics was tested by using the Vickers indentation method. The fracture toughness of hypoeutectic Al2O3-ZrO2 multiphase ceramics is 15.96 MPa·m^1/2 and that of hypoeutectic Al2O3-ZrO2 multiphase ceramics is 15.23 MPa·m^1/2. The toughening mechanisms were systematically investigated by means of SEM and XRD. The results show that the bridging toughening mechanism, stress induced ZrO2 transformation toughening mechanism, and microcrack toughening mechanism are the predominant toughening mechanism.

Effects of BN content on the mechanical properties of nanocrystalline 3Y-TZP/Al_(2)O_(3)/BN dental ceramics

3Y-TZP/3wt%Al_(2)O_(3) powder was coated with varying amounts of BN using the urea and borate reaction sintering method,and then multiphase ceramics were prepared by hot pressing sintering.The micro-topography and the compositional analysis of synthesized ceramics were conducted through scanning electron microscopy,transmission electron microscopy and X-ray diffraction.A mechanical tester was used to analyze the Vickers hardness,fracture toughness,and bending strength of the synthesized ceramics.The results showed that the ceramic with a BN content of 12wt%showed the best processability,but had diminished mechanical properties(such as fracture toughness and bending strength).The ceramic with a BN content of 9wt%showed better processability than those with 3wt%and 6wt%BN.However,the fracture toughness was affected by the addition of 9wt%BN,making this ceramic only usable as a base material for a three-unit fixed bridge.In contrast,the ceramics with a BN content of 3wt%or 6wt%fulfilled the criteria for use in multi-unit restoration,but their low processability made them unsuitable for milling after sintering.

Preparation of micro-nano hollow multiphase ceramic microspheres containing MnFe_2O_4 absorbent by self-reactive quenching method

Fe–Fe2O3–MnO2–sucrose–epoxy resin and O2 as reaction system and feed gas,separately,were used to prepare micro-nano hollow multiphase ceramic microspheres containing MnFe2O4absorbent by self-reactive quenching method which is integrated with flame jet,selfpropagating high-temperature synthesis(SHS),and rapidly solidification.The morphologies and phase compositions of hollow microspheres were studied by scanning electron microscope(SEM),transmission electron microscope(TEM),X-ray diffraction(XRD),and energy dispersive spectroscopy.The results show that the quenching products are regular spherical substantially with hollow structure,particle size is between few hundreds nanometers and 5 lm.Phase compositions are diphase of Fe3O4,Mn3O4,and MnFe2O4,and the spinel soft magnetic ferrite MnFe2O4 with microwave magnetic properties is in majority.Collisions with each other,burst as well as‘‘refinement’’of agglomerate powders in flame field may be the main reasons for the formation of micro-nano hollow multiphase ceramic microspheres containing MnFeOabsorbent.

Preparation of hollow ceramic microspheres absorbent based on self-reactive quenching technology

A1 ＋ BaO2 ＋ Fe2O3 ＋ sucrose and O2 as reaction system and feeding gas, respectively, are used to prepare hollow multiphase ceramic microspheres （HMCMs） absorbent based on self-reactive quenching technology. The morphologies, particle size distribution, hollow structure and phase compositions were characterized by scanning electron microscope （SEM）, X-ray diffraction （XRD） and size analysis. The results show that the quenching products possess high sphere-forming rate, and most of them are hollow structures. Owing to the self-burst, the particle size is between 40 and 70 μm. The phase compositions contain Al2O3, Fe3O4, Fe2O3, Ba2Fe14O22, BaO2 and BaFe4O7. The microwave absorbing tests show that the lowest reflectivity of HMCMs is -19 dB. The frequency bands less than -10 dB are from 13.0 to 15.8 GHz. The reasons for HMCMs possessing good microwave absorbing properties may be their magnetic and electrical properties as well as special hollow structure.