Review:Multiple Functionalities of Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries are a kind of attractive power supply devices due to their high energy, environmental benignity, and intrinsic safety. In recent years, tremendous enthusiasm has been devoted to the functionalities of aqueous zinc-ion batteries, aiming to extend their potential applications in multiple dimensions and multiple scales. Here, the latest advances in the design, construction, and performance evaluation of aqueous zinc-ion batteries are summarized. The focus is on various functionalities such as flexibility, self-healing, self-charging, and miniaturization. We also highlight the materials and structures that have been engineered to realize these functionalities. Finally, we offer some general insights into the challenges and chances in such exciting field.

Multiple failure function based fragility curves for structures equipped with TMD

This paper presents a procedure to develop fragility curves of structures equipped with TMD considering multiple failure functions.The failure criteria considered are maximum inter-story drift ratio as a safety criterion,maximum absolute acceleration as a convenience criterion and TMD stroke length.The relationship between intensity measure and responses of the structure was assumed to follow the power-law model,and a regression analysis was used to estimate its properties.A nonlinear eight-story shear building subjected to near-fault earthquakes was used for the numerical studies.Fragility curves using multiple and single failure functions for an uncontrolled structure and a structure equipped with optimal TMDs were developed.Numerical analysis showed that using multiple failure functions led to increasing the fragility when compared with using the single failure function for both the uncontrolled and controlled structures.However,TMDs slightly reduced the seismic fragility and have the capability to improve the reliability of the structure.Also,it was found that the fragility was significantly influenced by the values of the capacity thresholds of both the acceleration of the structure and TMD stroke length,which should be selected by considering the target performance and application of the structure and control device.

OPTIMALITY CONDITIONS AND DUALITY RESULTS FOR NONSMOOTH VECTOR OPTIMIZATION PROBLEMS WITH THE MULTIPLE INTERVAL-VALUED OBJECTIVE FUNCTION

In this paper, both Fritz John and Karush-Kuhn-Tucker necessary optimality conditions are established for a （weakly） LU-efficient solution in the considered nonsmooth multiobjective programming problem with the multiple interval-objective function. Further, the sufficient optimality conditions for a （weakly） LU-efficient solution and several duality results in Mond-Weir sense are proved under assumptions that the functions constituting the considered nondifferentiable multiobjective programming problem with the multiple interval- objective function are convex.

Rheological Behaviour for Polymer Melts and Concentrated Solutions Part Ⅲ: A New Multiple Entanglement Model to Predict the Dependence of Linear Viscoelastic Function (η_0, Ψ_(10)~0,η_(ext)~0) on the Ranges of Primary Molecular Weights and th

It is shown theoretically that the viscoelasticity of polymer melts is determined by three combining factorst they are the primary molecular weight and its distribution, the number of entanglement sites on polymer chain and the sequence distribution of constituent chains in entanglement spacings. A unified quantity for the three combing factors is the average constrained dimensional number of constituent chains in the long entanglement spacings (v). A new relation of v to the primary molecular weight and the number of testing polymers were derived from the multiple entanglement and reptation model, and a new method for determining v was proposed. The dependences of linear viscoelastic functions on the primary molecular weight and its distribution were derived by the statistical method. When Mn=6Me to 18 Me, the values of (v) can range from 3.33 to 3.70. Their values are in a good agreement with the experiment data, and it can slightjy vary with the different species of polymers and the different ranges of molecular weight of polymers

Solutions of multiple vector refinement equations with infinite mask

This paper is devoted to investigating the solutions of refinement equations of the form Ф（x）=∑α∈Z^s α（α）Ф（Mx-α）,x∈R^s,where the vector of functions Ф = （Ф1,… ,Фr）^T is in （L1（R^s））^r, α =（α（α））α∈Z^s is an infinitely supported sequence of r × r matrices called the refinement mask, and M is an s × s integer matrix such that lim n→∞ M^-n =0, with m = detM. Some properties about the solutions of refinement equations axe obtained.

The principle and Application of the Multiple and Partial Coherence Analysis

The basic principles of the partial and multiple coherence ananlysis and their utilization on vibration source identification are discussed in detail in this paper. The partial coherence analysis is the effective method of vibration source identification in multiple input single output systems.Formerly, there was not any this kind of function in the signal processor, and there was not any special software too. The software which we developed and used in the 7T 17S signal processor has this function. This software can be used not only for the partial and multiple coherence analysis of signal, but also for the correlation analysis, power spectrum analysis, transfer function analysis et al.We used this software to make the identifcation of the vibration source of the car floor board of electrical measuring vehicle, and to find the main factors which effect the vibration of the car board.The excellent result was obtained. This method can also be used for making the identifications of noise source and other sources.

Application of Multiple Mean Generational Function Method to Typhoon Prediction over the Western North Pacific

[ Objective] The multiple mean generational function （MMGF） method was applied to forecast the annual number of typhoons （TYs） over the Western North Pacific （WNP）. [Method]The method yields a number of predictors by mean generational function based on the rolling 50- year data of TYs frequency and sunspot number, and was repeated to generate forecasts year after year by optimal subset regression. [ Result] The results showed a reasonably high predictive ability dudng period 2000 -2010, with an average root mean square （RMSE） value of 1.92 and a mean absolute error （MAE） value of 1.64. [ Conclusion] Although the MMGF method needs further validation in the practical operation, it already has strong potential for the improvement of skill at forecasting annual frequency of TYs in the WNP.

The Biorthogonality of Multiple Vector-valued Bivariate Wavelet Packets

The notion of a sort of biorthogonal multiple vector-valued bivariate wavelet packets,which are associated with a quantity dilation matrix,is introduced.The biorthogonality property of the multiple vector-valued wavelet packets in higher dimensions is studied by means of Fourier transform and integral transform biorthogonality formulas concerning these wavelet packets are obtained.

Order of Magnitude of Multiple Fourier Coefficients

The order of magnitude of multiple Fourier coefficients of complex valued functions of generalized bounded variations like （∧^1,.. .,∧^N）BV^（p） and r-BV, over [0,2π]^ N, are estimated.

Unconventional Designs for Functional Sodium-Sulfur Batteries

Sodium-sulfur(Na–S)batteries that utilize earth-abundant materials of Na and S have been one of the hottest topics in battery research.The low cost and high energy density make them promising candidates for next-generation storage technologies as required in the grid and renewable energy.In recent years,extensive efforts have been devoted to the diversity and functionalities of Na–S batteries,aiming to extend their potential applications across multiple temporal and spatial dimensions.Here,we summarize the unconventional designs for the functionalities of Na–S batteries such as flexible batteries,solid-state cells,flame resistance,and operation at extreme temperatures.By highlighting these design strategies that help to realize the functionalities,we hope this review offers a pathway to foster the bright future of Na–S batteries in diverse applications.

MULTIPLE POSITIVE SOLUTIONS OF A SINGULAR (n-1,1) CONJUGATE BOUNDARY VALUE PROBLEM WITH DELAY

This paper discusses the singular ( n\|1,1 ) conjugate boundary value problem as follows by using a fixed point index theorem in cones[HL(2:1,Z;2,Z]u (n) (t)+a(t)f(u(w(t)))=0,(0<t<1), u(t)=φ(t),(-τ≤t<0), u (j) (0)=u(1)=0,(1≤j≤n-2).Effort is devoted to give some sufficient conditions for which the equation has at least two positive solutions.An example to illustrate the application of this theorem is given. [FQ(6*2。39,X-W]

Finite-Time H∞ Control of Switched Nonlinear Systems under State-Dependent Switching

This paper investigates the finite-time H∞ control problem of switched nonlinear systems via state-dependent switching and state feedback control. Unlike the existing approach based on time-dependent switching strategy, in which the switching instants must be given in advance, the state-dependent switching strategy is used to design switching signals. Based on multiple Lyapunov-like functions method, several criteria for switched nonlinear systems to be finite-time H∞ control are derived. Finally, a numerical example with simulation results is provided to show the validity of the conclusions.

Exponential stabilization of networked control systems and design of switching controller

This paper deals with the problem of switching between an open-loop estimator and a close-loop estimator for compensating transmission error and packet dropout of networked control systems. Switching impulse is considered in order to reduce the error between theory and application, a sufficient condition for exponential stabilization of networked control systems under a given switching rule is presented by multiple Lyapunov-like functions. These results are presented for both continuous-time and discrete-time domains. Controllers are designed by means of linear matrix inequalities. Sim- ulation results show the feasibility and efficiency of the proposed method.

Control of switched systems with actuator saturation

This paper is concerned with controller synthesis for linear switched systems with actuator saturation. Based on common Lyapunov function technique and multiple-Lyapunov function technique, two methods for designing state feedback controller are proposed respectively in terms of linear matrix inequalities for the switched systems with saturation. An approach on enlarging the attractive domain is then investigated, The application of the presented approach is illustrated finally by a numerical example.

Nonfragile control for a class of uncertain switching fuzzy time-delay systems

A sufficient condition for the existence of nonfragile state-feedback controllers and a switching law for a class of uncertain switching fuzzy time-delay systems are proposed based on the multiple Lyapunov functions technique, under the assumption that the controller gain to be designed has variations. The corresponding results are all formulated in terms of linear matrix inequalities (LMIs). Simulation results show the effectiveness of the design method.

INTEGRAL EQUATION METHOD'S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.

H∞ Tracking Control for Switched LPV Systems With an Application to Aero-Engines

This paper focuses on the H_∞ model reference tracking control for a switched linear parameter-varying(LPV)model representing an aero-engine. The switched LPV aeroengine model is built based on a family of linearized models.Multiple parameter-dependent Lyapunov functions technique is used to design a tracking control law for the desirable H_∞ tracking performance. A control synthesis condition is formulated in terms of the solvability of a matrix optimization problem.Simulation result on the aero-engine model shows the feasibility and validity of the switching tracking control scheme.

Global exponential stability of switched systems

This paper proposes a method for the stability analysis of deterministic switched systems.Two motivational examples are introduced （nonholonomic system and constrained pendulum）.The finite collection of models consists of nonlinear models,and a switching sequence is arbitrary.It is supposed that there is no jump in the state at switching instants,and there is no Zeno behavior,i.e.,there is a finite number of switches on every bounded interval.For the analysis of deterministic switched systems,the multiple Lyapunov functions are used,and the global exponential stability is proved.The exponentially stable equilibrium of systems is relevant for practice because such systems are robust to perturbations.

A computational model of the human glucose-insulin regulatory system

Objective：A computational model of insulin secretion and glucose metabolism for assisting the diagnosis of diabetes mellitus in clinical research is introduced.The proposed method for the estimation of parameters for a system of ordinary differential equations（ODEs）that represent the time course of plasma glucose and insulin concentrations during glucose tolerance test（GTT）in physiological studies is presented.The aim of this study was to explore how to interpret those laboratory glucose and insulin data as well as enhance the Ackerman mathematical model.Methods：Parameters estimation for a system of ODEs was performed by minimizing the sum of squared residuals（SSR）function,which quantifies the difference between theoretical model predictions and GTT＇s experimental observations.Our proposed perturbation search and multiple-shooting methods were applied during the estimating process.Results：Based on the Ackerman＇s published data,we estimated the key parameters by applying R-based iterative computer programs.As a result,the theoretically simulated curves perfectly matched the experimental data points.Our model showed that the estimated parameters,computed frequency and period values,were proven a good indicator of diabetes.Conclusion：The present paper introduces a computational algorithm to biomedical problems,particularly to endocrinology and metabolism fields,which involves two coupled differential equations with four parameters describing the glucose-insulin regulatory system that Ackerman proposed earlier.The enhanced approach may provide clinicians in endocrinology and metabolism field insight into the transition nature of human metabolic mechanism from normal to impaired glucose tolerance.

FURTHER APPLICATIONS OF POLAR COORDINATES IN C^n

Simplify the proof on the domain of convergence of multiple power series and consider the case where some of z1, …, zn are contained only in a finite number of terms of the series. Obtain some results on holomorphic functions in Cn.