A microreactor system was used to study the catalytic reaction of NO+CO→1/2 N_2+CO_2 over Cu,Fe, Mn,Cr,and Ce oxides supported on alumina,and the effect of adding Ce in supported Cu-M-O(M=Mn,Fe and Cr) catalysts on t...A microreactor system was used to study the catalytic reaction of NO+CO→1/2 N_2+CO_2 over Cu,Fe, Mn,Cr,and Ce oxides supported on alumina,and the effect of adding Ce in supported Cu-M-O(M=Mn,Fe and Cr) catalysts on their catalytic activities for the topic reaction and the concentration of N_2O produced.It was found that the catalytic activity order of the single-element oxide is:CuO>Fe_2O_3≈Cr_2O_3> MnO_2>CeO_2>NiO.Cu-Mn-O is more active than CuO,and Cu-Fe-O is more active than Cu-Mn-O and Cu-Cr-O for NO+CO reaction.This study shows that the addition of Ce in supported Cu-M-O can promote their catalytic activities Jot the topic reaction,which makes the reaction of 2NO+CO→N_2O+CO_2 fast,and N_2O is an intermediate compound produced during NO+CO reaction.展开更多
Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for C...Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for CO oxidation with high catalytic activity.The catalytic performance between the（CuCe）/MIL-53（A1） and the Cu/MIL-53（A1） catalytic material was compared to understand the catalytic behavior of the catalysts.The catalysts were characterized by thermogravimetric-differential scanning calorimetry（TGDSC）,N2 adsorption- desorption,X-ray diffraction（XRD）,and transmission electron microscopy（TEM）.The characterization results showed that MIL-53（A1） had good stability and high surface areas,the（Ce-Cu）nanoparticles on the MIL-53（A1） support was uniform.Therefore,the heterogeneous catalytic composite materials（Ce-Cu）/MIL-53（A1） catalyst exhibited much higher activity than that of the Cu/MIL- 53（A1） catalyst in CO oxidation test,with 100%conversion at 80 ℃.The results reveal that（Cu-Ce）/MIL-53（A1） is the suitable candidate for achieving low temperature and higher activity CO oxidation catalyst of MOFs.展开更多
Ammonia （NH3） has an important use in the chemical industry and is widely found in industrial wastewater. For this investigation of copper-based rare earth composite metal materials, aqueous solutions containing 400...Ammonia （NH3） has an important use in the chemical industry and is widely found in industrial wastewater. For this investigation of copper-based rare earth composite metal materials, aqueous solutions containing 400 mg/L of ammonia were oxidized in a batch-bed reac-tor with a catalyst prepared by the co-precipitation of copper nitrate, lanthanum nitrate and cerium nitrate. Barely any of the dissolved ammo-nia was removed by wet oxidation without a catalyst, but about 88% of the ammonia was reduced during wet oxidation over the catalysts at 423 K with an oxygen partial pressure of 4.0 MPa. The catalytic redox behavior was determined by cyclic voltammetry （CV）. Furthermore, the catalysts were characterized using thermogravimetric analyzer （TGA） and scanning electron microscope-energy dispersive X-ray spectroscopy （SEM-EDX）, which showed that the catalytic behavior was related to the metal oxide properties of the catalyst. In addition, the copper-lanthanum-cerium composite-induced cytotoxicity in the human lung MRC-5 cell line was tested, and the percentage cell survival was determined by 3-（4,5-dimethylthiazol-2-yl）-5-（3-carboxymethoxyphenyl）-2-（4-sulfophenyl）-2H-tetra-zolium （MTS） analysis in vitro. No ap-parent cytotoxicity was observed when the human lung cells were exposed to the copper-lanthanum-cerium composite.展开更多
文摘A microreactor system was used to study the catalytic reaction of NO+CO→1/2 N_2+CO_2 over Cu,Fe, Mn,Cr,and Ce oxides supported on alumina,and the effect of adding Ce in supported Cu-M-O(M=Mn,Fe and Cr) catalysts on their catalytic activities for the topic reaction and the concentration of N_2O produced.It was found that the catalytic activity order of the single-element oxide is:CuO>Fe_2O_3≈Cr_2O_3> MnO_2>CeO_2>NiO.Cu-Mn-O is more active than CuO,and Cu-Fe-O is more active than Cu-Mn-O and Cu-Cr-O for NO+CO reaction.This study shows that the addition of Ce in supported Cu-M-O can promote their catalytic activities Jot the topic reaction,which makes the reaction of 2NO+CO→N_2O+CO_2 fast,and N_2O is an intermediate compound produced during NO+CO reaction.
基金Funded by the Guiding Research Project of Hubei Province Department of Education(No.B2016098)
文摘Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for CO oxidation with high catalytic activity.The catalytic performance between the（CuCe）/MIL-53（A1） and the Cu/MIL-53（A1） catalytic material was compared to understand the catalytic behavior of the catalysts.The catalysts were characterized by thermogravimetric-differential scanning calorimetry（TGDSC）,N2 adsorption- desorption,X-ray diffraction（XRD）,and transmission electron microscopy（TEM）.The characterization results showed that MIL-53（A1） had good stability and high surface areas,the（Ce-Cu）nanoparticles on the MIL-53（A1） support was uniform.Therefore,the heterogeneous catalytic composite materials（Ce-Cu）/MIL-53（A1） catalyst exhibited much higher activity than that of the Cu/MIL- 53（A1） catalyst in CO oxidation test,with 100%conversion at 80 ℃.The results reveal that（Cu-Ce）/MIL-53（A1） is the suitable candidate for achieving low temperature and higher activity CO oxidation catalyst of MOFs.
基金supported by the National Science Council of Taiwan (NSC 98-2221-E-132-003-MY3)
文摘Ammonia （NH3） has an important use in the chemical industry and is widely found in industrial wastewater. For this investigation of copper-based rare earth composite metal materials, aqueous solutions containing 400 mg/L of ammonia were oxidized in a batch-bed reac-tor with a catalyst prepared by the co-precipitation of copper nitrate, lanthanum nitrate and cerium nitrate. Barely any of the dissolved ammo-nia was removed by wet oxidation without a catalyst, but about 88% of the ammonia was reduced during wet oxidation over the catalysts at 423 K with an oxygen partial pressure of 4.0 MPa. The catalytic redox behavior was determined by cyclic voltammetry （CV）. Furthermore, the catalysts were characterized using thermogravimetric analyzer （TGA） and scanning electron microscope-energy dispersive X-ray spectroscopy （SEM-EDX）, which showed that the catalytic behavior was related to the metal oxide properties of the catalyst. In addition, the copper-lanthanum-cerium composite-induced cytotoxicity in the human lung MRC-5 cell line was tested, and the percentage cell survival was determined by 3-（4,5-dimethylthiazol-2-yl）-5-（3-carboxymethoxyphenyl）-2-（4-sulfophenyl）-2H-tetra-zolium （MTS） analysis in vitro. No ap-parent cytotoxicity was observed when the human lung cells were exposed to the copper-lanthanum-cerium composite.
