Design and Realization of InP/AlGaInAs MultipleQuantum Well Ring Laser

Using beam propagation method （BPM）, key optical design parameters of InP/AlGaInAs multiple quantumwell （MQW） ring laser were numerically analyzed. The influences of waveguide dimensions, curvature radiusand gap size on the coupling efficiency were discussed. An InP/AlGaInAs MQW ring laser with radius of 350 μm wasdesigned and realized. The experimental results show that the designed device, lasing at 1 563.2 nm with side modesuppression ratio higher than 20 dB, exhibited unidirectional bistability between the clockwise and counterclockwisemodes.

Evaluation of polarization field in InGaN/GaN multiple quantum well structures by using electroluminescence spectra shift

In order to investigate the inherent polarization intensity in InGaN/GaN multiple quantum well(MQW) structures,the electroluminescence(EL) spectra of three samples with different GaN barrier thicknesses of 21.3 nm, 11.4 nm, and 6.5 nm are experimentally studied. All of the EL spectra present a similar blue-shift under the low-level current injection,and then turns to a red-shift tendency when the current increases to a specific value, which is defined as the turning point.The value of this turning point differs from one another for the three InGaN/GaN MQW samples. Sample A, which has the GaN barrier thickness of 21.3 nm, shows the highest current injection level at the turning point as well as the largest value of blue-shift. It indicates that sample A has the maximum intensity of the polarization field. The red-shift of the EL spectra results from the vertical electron leakage in InGaN/GaN MQWs and the corresponding self-heating effect under the high-level current injection. As a result, it is an effective approach to evaluate the polarization field in the InGaN/GaN MQW structures by using the injection current level at the turning point and the blue-shift of the EL spectra profiles.

Influence of barrier thickness on the structural and optical properties of InGaN/GaN multiple quantum wells

The structural and optical properties of InGaN/GaN multiple quantum wells （MQWs） with different barrier thick-nesses are studied by means of high resolution X-ray diffraction （HRXRD）, a cross-sectional transmission electron mi-croscope （TEM）, and temperature-dependent photoluminescence （PL） measurements. HRXRD and cross-sectional TEM measurements show that the interfaces between wells and barriers are abrupt and the entire MQW region has good periodic- ity for all three samples. As the barrier thickness is increased, the temperature of the turning point from blueshift to redshift of the S-shaped temperature-dependent PL peak energy increases monotonously, which indicates that the localization po- tentials due to In-rich clusters is deeper. From the Arrhenius plot of the normalized integrated PL intensity, it is found that there are two kinds of nonradiative recombination processes accounting for the thermal quenching of photoluminescence, and the corresponding activation energy （or the localization potential） increases with the increase of the barrier thickness. The dependence on barrier thickness is attributed to the redistribution of In-rich clusters during the growth of barrier layers, i.e., clusters with lower In contents aggregate into clusters with higher In contents.

Multiple Quantum Well SEED Arrays for Flip-Chip Bonding Optoelectronic Smart Pixels

The investigation on G)s/AlG)s multiple quantum well Self Electro-optic Effec t Device (SEED) arrays for flip\|chip bonding optoelectronic smart pixels has be en reported. In order to increase the absorption of the intrinsic region, the number of quantum well periods is defined as 90 pairs. The G)s/AlG)s multiple quantum well devices are designed for 850nm operation. The measurement results under applied biases show the good optoelectronic chara cteristics of elements in SEED arrays.

Room-temperature direct-bandgap photoluminescence from strain-compensated Ge/SiGe multiple quantum wells on silicon

Strain-compensated Ge/Si0.15Ge0.85 multiple quantum wells were grown on an Si0.1 Ge0.9 virtual substrate using ultrahigh vacuum chemical vapor deposition technology on an n＋-Si（001） substrate. Photoluminescence measurements were performed at room temperature, and the quantum confinement effect of the direct-bandgap transitions of a Ge quantum well was observed, which is in good agreement with the calculated results. The luminescence mechanism was discussed by recombination rate analysis and the temperature dependence of the luminescence spectrum.

Efficiency droop suppression in GaN-based light-emitting diodes by chirped multiple quantum well structure at high current injection

Gallium nitride （GaN） based light-emitting diodes （LEDs） with chirped multiple quantum well （MQW） structures have been investigated experimentally and numerically in this paper. Compared to conventional LEDs with uniform quantum wells （QWs）, LEDs with chirped MQW structures have better internal quantum efficiency （IQE） and carrier injection efficiency. The droop ratios of LEDs with chirped MQW structures show a remarkable improvement at 600 mA/mm2, reduced down from 28.6% （conventional uniform LEDs） to 23.7% （chirped MQWs-a） and 18.6% （chirped MQWs-b）, respectively. Meanwhile, the peak IQE increases from 76.9% （uniform LEDs） to 83.7% （chirped MQWs-a） and 88.6% （chirped MQWs-b）. The reservoir effect of chirped MQW structures is the significant reason as it could increase hole injection efficiency and radiative recombination. The leakage current and Auger recombination of chirped MQW structures can also be suppressed. Furthermore, the chirped MQWs-b structure with lower potential barriers can enhance the reservoir effect and obtain further improvement of the carrier injection efficiency and radiative recombination, as well as further suppressing efficiency droop.

Low driving voltage in an organic light-emitting diode using MoO_3/NPB multiple quantum well structure in a hole transport layer

The driving voltage of an organic light-emitting diode（OLED） is lowered by employing molybdenum trioxide（MoO3）/N,N＇-bis（naphthalene-1-yl）-N,N＇-bis（phe-nyl）-benzidine（NPB） multiple quantum well（MQW） structure in the hole transport layer.For the device with double quantum well（DQW） structure of ITO/[MoO3（2.5 nm）/NPB（20 nm）]2/Alq3（50 nm）/LiF（0.8 nm）/Al（120 nm）],the turn-on voltage is reduced to 2.8 V,which is lowered by 0.4 V compared with that of the control device（without MQW structures）,and the driving voltage is 5.6 V,which is reduced by 1 V compared with that of the control device at the 1000 cd/m2.In this work,the enhancement of the injection and transport ability for holes could reduce the driving voltage for the device with MQW structure,which is attributed not only to the reduced energy barrier between ITO and NPB,but also to the forming charge transfer complex between MoO3 and NPB induced by the interfacial doping effect of MoO3.

High quality above 3-μm mid-infrared InGaAsSb/AlGaInAsSb multiple-quantum well grown by molecular beam epitaxy

The GaSb-based laser shows its superiority in the 3-4 ~tm wavelength range. However, for a quantum well （QW） laser structure of InGaAsSb/AIGaInAsSb multiple-quantum well （MQW） grown on GaSb, uniform content and high com- pressive strain in InGaAsSb/A1GaInAsSb are not easy to control. In this paper, the influences of the growth tempera- ture and compressive strain on the photoluminescence （PL） property of a 3.0μm lnGaAsSb/A1GaInAsSb MQW sample are analyzed to optimize the growth parameters. Comparisons among the PL spectra of the samples indicate that the Ino.485GaAso.184Sb/Alo.3Gao.45Ino.25Aso.22Sbo.78 MQW with 1.72% compressive strain grown at 460 ~C posseses the op- timum optical property. Moreover, the wavelength range of the MQW structure is extended to 3.83 μm by optimizing the parameters.

Directional Modulation Based on a Quantum Genetic Algorithm for a Multiple-Reflection Model

Directional modulation is one of the hot topics in data security researches.To fulfill the requirements of communication security in wireless environment with multiple paths,this study takes into account the factors of reflections and antenna radiation pattern for directional modulation.Unlike other previous works,a novel multiple-reflection model,which is more realistic and complex than simplified two-ray reflection models,is proposed based on two reflectors.Another focus is a quantum genetic algorithm applied to optimize antenna excitation in a phased directional modulation antenna array.The quantum approach has strengths in convergence speed and the globe searching ability for the complicated model with the large-size antenna array and multiple paths.From this,a phased directional modulation transmission system can be optimized as regards communication safety and improve performance based on the constraint of the pattern of the antenna array.Our work can spur applications of the quantum evolutionary algorithm in directional modulation technology,which is also studied.

Direct Observation of Carrier Transportation Process in InGaAs/GaAs Multiple Quantum Wells Used for Solar Cells and Photodetectors

The resonant excitation is used to generate photo-excited carriers in quantum wells to observe the process of the carriers transportation by comparing the photoluminescence results between quantum wells with and without a p-n junction. It is observed directly in experiment that most of the photo-excited carriers in quantum wells with a p-n junction escape from quantum wells and form photoeurrent rather than relax to the ground state of the quantum wells. The photo absorption coei^cient of multiple quantum wells is also enhanced by a p-n junction. The results pave a novel way for solar cells and photodetectors making use of low-dimensional structure.

Photoluminescence properties of blue and green multiple InGaN/GaN quantum wells

The photoluminescence(PL) properties of blue multiple InGaN/GaN quantum well(BMQW) and green multiple InGaN/GaN quantum well(GMQW) formed on a single sapphire substrate are investigated. The results indicate that the peak energy of GMQW-related emission(PG) exhibits more significant "S-shaped" dependence on temperature than that of BMQW-related emission(PB), and the excitation power-dependent carrier-scattering effect is observed only in the PG emission;the excitation power-dependent total blue-shift(narrowing) of peak position(line-width) for the PGemission is more significant than that for the PBemission;the GMQW shows a lower internal quantum efficiency than the BMQW. All of these results can be attributed to the fact that the GMQW has higher indium content than the BMQW due to its lower growth temperature and late growth, and the higher indium content in the GMQW induces a more significant compositional fluctuation, a stronger quantum confined Stark effect, and more non-radiative centers.

The enhancement of light-emitting efficiency using GaN-based multiple quantum well light-emitting diodes with nanopillar arrays

The quest for higher modulation speed and lower energy consumption has inevitably promoted the rapid development of semiconductor-based solid lighting devices in recent years. GaN-based light-emitting diodes （LEDs） have emerged as promising candidates for achieving high efficiency and high intensity, and have received increasing attention among many researchers in this field. In this paper, we use a self-assembled array-patterned mask to fabricate InGaN/GaN multi- quantum well （MQW） LEDs with the intention of enhancing the light-emitting efficiency. By utilizing inductively coupled plasma etching with a self-assembled Ni cluster as the mask, nanopillar arrays are formed on the surface of the InGaN/GaN MQWs. We then observe the structure of the nanopillars and find that the V-defects on the surface of the conventional structure and the negative effects of threading dislocation are effectively reduced. Simultaneously, we make a comparison of the photoluminescence （PL） spectrum between the conventional structure and the nanopillar arrays, achieved under an experimental set-up with an excitation wavelength of 325 mm. The analysis demonstrates that MQW-LEDs with nanopillar arrays achieve a PL intensity 2.7 times that of conventional LEDs. In response to the PL spectrum, some reasons are proposed for the enhancement in the light-emitting efficiency as follows： 1） the improvement in crystal quality, namely the reduction in V-defects; 2） the roughened surface effect on the expansion of the critical angle and the attenuated total reflection; and 3） the enhancement of the light-extraction efficiency due to forward scattering by surface plasmon polariton modes in Ni particles deposited above the p-type GaN layer at the top of the nanopillars.

Direct-bandgap electroluminescence from tensile-strained Ge/SiGe multiple quantum wells at room temperature

Tensile-strained Ge/SiGe multiple quantum wells （MQWs） were grown on a Ge-on-Si virtual substrate using ultrahigh vacuum chemical vapor deposition on an n＋-Si （001） substrate. Direct-bandgap electroluminescence from the MQWs light emitting diode was observed at room temperature. The quantum confinement effect of the direct-bandgap transitions is in good agreement with the theoretical calculated results. The redshift mechanism of emission wavelength related to the thermal effect is discussed,

Intra-acceptor hole relaxation in Be δ-doped GaAs/AlAs multiple quantum wells

This paper studies the dynamics of intra-acceptor hole relaxation in Be δ-doped GaAs/AlAs multiple quantum wells （MQW） with doping at the centre by time-resolved pump-probe spectroscopy using a picosecond free electron laser for infrared experiments. Low temperature far-infrared absorption measurements clearly show three principal absorption lines due to transitions of the Be acceptor from the ground state to the first three odd-parity excited states respectively. The pump-probe experiments are performed at different temperatures and different pump pulse wavelengths. The hole relaxation time from 2p excited state to ls ground state in MQW is found to be much shorter than that in bulk GaAs, and shown to be independent of temperature but strongly dependent on wavelength. The zone-folded acoustic phonon emission and slower decay of the wavefunctions of impurity states are suggested to account for the reduction of the 2p excited state lifetime in MQW. The wavelength dependence of the 2p lifetime is attributed to the diffusion of the Be atom δ-layer in quantum wells.

InGaN/GaN multiple quantum well solar cells with an enhanced open-circuit voltage

In this paper, InGaN/GaN multiple quantum well solar cells （MQWSCs） with an In content of 0.15 are fabricated and studied. The short-circuit density, fill factor and open-circuit voltage （Voc） of the device are 0.7 mA/cm2, 0.40 and 2.22 V, respectively. The results exhibit a significant enhancement of Voc compared with those of InGaN-based hetero and homojunction cells. This enhancement indicates that the InGaN/GaN MQWSC offers an effective way for increasing Voc of an In-rich InxGal-~N solar cell. The device exhibits an external quantum efficiency （EQE） of 36% （7%） at 388 nm （430 nm）. The photovoltaic performance of the device can be improved by optimizing the structure of the InGaN/GaN multiple quantum well.

Optimization of a GaN-based irregular multiple quantum well structure for a dichromatic white LED

GaN-based irregular multiple quantum well （IMQW） structures assembled two different types of QWs emitting complementary wavelengths for dichromatic white light-emitting diodes （LEDs） are optimized in order to obtain near white light emissions. The hole distributions and spontaneous emission spectra of the IMQW structures are analysed in detail by fully considering the effects of strain, well-coupling, valence band-mixing and polarization effect through employing a newly developed theoretical model from the k. p theory. Several structure parameters such as well material component, well width, layout of the wells and the thickness of harrier between different types of QWs are employed to analyse how these parameters together with the polarization effect influence the electronic and the optical properties of IMQW structure. Numerical results show that uniform hole distributions in different types of QWs are obtained when the number of the QWs emitting blue light is two, the number of the QWs emitting yellow light is one and the barrier between different types of QWs is 8nm in thickness. The near white light emission is realized using GaN-based IMQW structure with appropriate design parameters and injection level.

Epitaxial evolution on buried cracks in a strain-controlled AlN/GaN superlattice interlayer between AlGaN/GaN multiple quantum wells and a GaN template

Epitaxial evolution of buried cracks in a strain-controlled AIN/GaN superlattice interlayer （IL） grown on GaN tem- plate, resulting in crack-free AIGaN/GaN multiple quantum wells （MQW）, was investigated. The processes of filling the buried cracks include crack formation in the IL, coalescence from both side walls of the crack, build-up of an MQW-layer hump above the cracks, lateral expansion and merging with the surrounding MQW, and two-dimensional step flow growth. It was confirmed that the filling content in the buried cracks is pure GaN, originating from the deposition of the GaN thin layer directly after the IL. Migration of Ga adatoms into the cracks plays a key role in the filling the buried cracks.

Analysis of localization effect in blue-violet light emitting InGaN/GaN multiple quantum wells with different well widths

Four blue-violet light emitting InGaN/GaN multiple quantum well（MQW） structures with different well widths are grown by metal–organic chemical vapor deposition. The carrier localization effect in these samples is investigated mainly by temperature-dependent photoluminescence measurements. It is found that the localization effect is enhanced as the well width increases from 1.8 nm to 3.6 nm in our experiments. The temperature induced PL peak blueshift and linewidth variation increase with increasing well width, implying that a greater amplitude of potential fluctuation as well as more localization states exist in wider wells. In addition, it is noted that the broadening of the PL spectra always occurs mainly on the low-energy side of the PL spectra due to the temperature-induced band-gap shrinkage, while in the case of the widest well, a large extension of the spectral curve also occurs in the high energy sides due to the existence of more shallow localized centers.

Performance analysis of quantum access network using code division multiple access model

A quantum access network has been implemented by frequency division multiple access and time division multiple access, while code division multiple access is limited for its difficulty to realize the orthogonality of the code. Recently,the chaotic phase shifters were proposed to guarantee the orthogonality by different chaotic signals and spread the spectral content of the quantum states. In this letter, we propose to implement the code division multiple access quantum network by using chaotic phase shifters and synchronization. Due to the orthogonality of the different chaotic phase shifter, every pair of users can faithfully transmit quantum information through a common channel and have little crosstalk between different users. Meanwhile, the broadband spectra of chaotic signals efficiently help the quantum states to defend against channel loss and noise.

Shannon information entropies for rectangular multiple quantum well systems with constant total lengths

We first study the Shannon information entropies of constant total length multiple quantum well systems and then explore the effects of the number of wells and confining potential depth on position and momentum information entropy density as well as the corresponding Shannon entropy.We find that for small full width at half maximum（FWHM） of the position entropy density,the FWHM of the momentum entropy density is large and vice versa.By increasing the confined potential depth,the FWHM of the position entropy density decreases while the FWHM of the momentum entropy density increases.By increasing the potential depth,the frequency of the position entropy density oscillation within the quantum barrier decreases while that of the position entropy density oscillation within the quantum well increases.By increasing the number of wells,the frequency of the position entropy density oscillation decreases inside the barriers while it increases inside the quantum well.As an example,we might localize the ground state as well as the position entropy densities of the1 st,2 nd,and 6 th excited states for a four-well quantum system.Also,we verify the Bialynicki–Birula–Mycieslki（BBM）inequality.