Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low inse...Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.展开更多
The demonstration of a higher data rate transmission system was amajor aspect to be considered by researchers in recent years. The most relevantaspect to be studied and analyzed is the need for a reliable system to ha...The demonstration of a higher data rate transmission system was amajor aspect to be considered by researchers in recent years. The most relevantaspect to be studied and analyzed is the need for a reliable system to handlenonlinear impairments and reduce them. Therefore, this paper examines theinfluence of Four-Wave Mixing (FWM) impairment on the proposed highdata rate Dual polarization–Differential Quadrature phase shift keying (DPDQPSK)system using the Optisystem software. In the beginning, the impactof varied input power on the proposed system’s performance was evaluated interms of QF and BER metrics. More power is used to improve system performance.However, increasing power would raise theFWMeffects. Accordingly,a−10dBminput power and the proposed system are used to reduce the impactof FWM. Additionally, a hybrid amplification method is proposed to enhancesystem performance by utilizing the major amplification methods of erbiumdopedfiber amplifier (EDFA): semiconductor optical amplifier (SOA) andRadio optical amplifier (ROA). The evaluation demonstrates that the OAEDFAoutperformed the other two key amplification techniques of (EDFASOA)and (EDFA-ROA) in improving Quality factor (QF) and Bit error rate(BER) system results for all distances up to 720 km. Consequently, the methodcontributes to minimizing the impact of FWM. In the future, other forms ofnonlinearity will be investigated and studied to quantify their impact on theproposed system.展开更多
We have successfully demonstrated a 1 Kb spin-orbit torque(SOT)magnetic random-access memory(MRAM)multiplexer(MUX)array with remarkable performance.The 1 Kb MUX array exhibits an in-die function yield of over 99.6%.Ad...We have successfully demonstrated a 1 Kb spin-orbit torque(SOT)magnetic random-access memory(MRAM)multiplexer(MUX)array with remarkable performance.The 1 Kb MUX array exhibits an in-die function yield of over 99.6%.Additionally,it provides a sufficient readout window,with a TMR/RP_sigma%value of 21.4.Moreover,the SOT magnetic tunnel junctions(MTJs)in the array show write error rates as low as 10^(-6)without any ballooning effects or back-hopping behaviors,ensuring the write stability and reliability.This array achieves write operations in 20 ns and 1.2 V for an industrial-level temperature range from-40 to 125℃.Overall,the demonstrated array shows competitive specifications compared to the state-of-the-art works.Our work paves the way for the industrial-scale production of SOT-MRAM,moving this technology beyond R&D and towards widespread adoption.展开更多
基金supported in part by the ZTE Industry-University-Institute Cooperation Funds.
文摘Weakly-coupled mode division multiplexing(MDM)technique is considered a promising candidate to enhance the capacity of an optical transmission system,in which mode multiplexers/demultiplexers(MMUX/MDEMUX)with low insertion loss and modal crosstalk are the key components.In this paper,a low-modal-crosstalk 4-mode MMUX/MDEMUX for the weakly-coupled triple-ring-core few-mode fiber(TRC-FMF)is designed and fabricated with side-polishing processing.The measurement results show that a pair of MMUX/MDEMUX and 25 km weakly-coupled TRC-FMF MDM link achieve low modal crosstalk of lower than−17.5 dB and insertion loss of lower than 11.56 dB for all the four modes.Based on the TRC-FMF and all-fiber MMUX/MDEMUX,an experiment for 25 km real-time 4-mode 3-λwavelength division multiplexing(WDM)-MDM transmission is conducted using commercial 400G optical transport network(OTN)transceivers.The experimental results prove weakly-coupled MDM techniques facilitate a smooth upgrade of the optical transmission system.
基金the Ministry of Higher Education (MOHE)in Malaysia,Universiti Teknologi Malaysia (UTM),and Universitas Sriwijaya (UNSRI)for sponsoring the Matching Grant Research between UTM and UNSRI (R.J.130000.7309.4B571).
文摘The demonstration of a higher data rate transmission system was amajor aspect to be considered by researchers in recent years. The most relevantaspect to be studied and analyzed is the need for a reliable system to handlenonlinear impairments and reduce them. Therefore, this paper examines theinfluence of Four-Wave Mixing (FWM) impairment on the proposed highdata rate Dual polarization–Differential Quadrature phase shift keying (DPDQPSK)system using the Optisystem software. In the beginning, the impactof varied input power on the proposed system’s performance was evaluated interms of QF and BER metrics. More power is used to improve system performance.However, increasing power would raise theFWMeffects. Accordingly,a−10dBminput power and the proposed system are used to reduce the impactof FWM. Additionally, a hybrid amplification method is proposed to enhancesystem performance by utilizing the major amplification methods of erbiumdopedfiber amplifier (EDFA): semiconductor optical amplifier (SOA) andRadio optical amplifier (ROA). The evaluation demonstrates that the OAEDFAoutperformed the other two key amplification techniques of (EDFASOA)and (EDFA-ROA) in improving Quality factor (QF) and Bit error rate(BER) system results for all distances up to 720 km. Consequently, the methodcontributes to minimizing the impact of FWM. In the future, other forms ofnonlinearity will be investigated and studied to quantify their impact on theproposed system.
基金supported by the National Key Research and Development Program of China (Nos.2021YFB3601303,2021YFB3601304,2021YFB3601300,2022YFB4400200,2022YFB4400201,2022YFB4400203)the National Natural Science Foundation of China (Grant No.62171013)。
文摘We have successfully demonstrated a 1 Kb spin-orbit torque(SOT)magnetic random-access memory(MRAM)multiplexer(MUX)array with remarkable performance.The 1 Kb MUX array exhibits an in-die function yield of over 99.6%.Additionally,it provides a sufficient readout window,with a TMR/RP_sigma%value of 21.4.Moreover,the SOT magnetic tunnel junctions(MTJs)in the array show write error rates as low as 10^(-6)without any ballooning effects or back-hopping behaviors,ensuring the write stability and reliability.This array achieves write operations in 20 ns and 1.2 V for an industrial-level temperature range from-40 to 125℃.Overall,the demonstrated array shows competitive specifications compared to the state-of-the-art works.Our work paves the way for the industrial-scale production of SOT-MRAM,moving this technology beyond R&D and towards widespread adoption.
