Experimental study of the effects of a multistage pore-throat structure on the seepage characteristics of sandstones in the Beibuwan Basin:Insights into the flooding mode

To investigate the relationship between grain sizes, seepage capacity, and oil-displacement efficiency in the Liushagang Formation of the Beibuwan Basin, this study identifies the multistage pore-throat structure as a crucial factor through a comparison of oil displacement in microscopic pore-throat experiments. The two-phase flow evaluation method based on the Li-Horne model is utilized to effectively characterize and quantify the seepage characteristics of different reservoirs, closely relating them to the distribution of microscopic pores and throats. It is observed that conglomerate sandstones at different stages exhibit significant heterogeneity and noticeable differences in seepage capacity, highlighting the crucial role played by certain large pore throats in determining seepage capacity and oil displacement efficiency. Furthermore, it was found that the displacement effects of conglomeratic sandstones with strong heterogeneity were inferior to those of conventional homogeneous sandstone, as evidenced by multiple displacement experiments conducted on core samples with varying granularities and flooding systems. Subsequently, core-based experiments on associated gas flooding after water flooding were conducted to address the challenge of achieving satisfactory results in a single displacement mode for reservoirs with significant heterogeneity. The results indicate that the oil recovery rates for associated gas flooding after water flooding increased by 7.3%-16.4% compared with water flooding alone at a gas-oil ratio of approximately 7000 m^(3)/m^(3). Therefore, considering the advantages of gas flooding in terms of seepage capacity, oil exchange ratio, and the potential for two-phase production, gas flooding is recommended as an energy supplement mode for homogeneous reservoirs in the presence of sufficient gas source and appropriate tectonic angle. On the other hand, associated gas flooding after water flooding is suggested to achieve a more favorable development effect compared to a single mode of energy supplementation for strongly heterogeneous sandstone reservoirs.

Modified Sadowski formula-based model for the slope shape amplification effect under multistage slope blasting vibration

Blasting operations,which are crucial to open-pit mine production due to their simplicity and efficiency,require precise control through accurate vibration velocity calculations.The conventional Sadowski formula mainly focuses on blast center distance but neglects the amplification effect of blasting vibration waves by terraced terrain,from which the calculated blasting vibration velocities are smaller than the actual values,affecting the safety of the project.To address this issue,our model introduces the influences of slope and time into Sadowski formula to measure safety through blast vibration displacement.In the northern section of the open-pit quartz mine in Jinchang City,Gansu Province,China,the data of a continuous blasting slope project are referred to.Our findings reveal a noticeable vibration amplification effect during blasting when a multi-stage slope platform undergoes a sudden cross-sectional change near the upper overhanging surface.The amplification vibration coefficient increases with height,while vibration waves within rocks decrease from bottom to top.Conversely,platforms without distinct crosssectional changes exhibit no pronounced amplification during blasting.In addition,the vibration intensity decreases with distance as the rock height difference change propagates.The results obtained by the proposed blast vibration displacement equation incorporating slope shape influence closely agree with real-world scenarios.According to Pearson correlation coefficient(PPMCC)analysis,the average accuracy rate of our model is 88.84%,which exceeds the conventional Sadowski formula(46.92%).

Multistage hydraulic fracturing of a horizontal well for hard roof related coal burst control:Insights from numerical modelling to field application

Multistage hydraulic fracturing of horizontal wells(MFHW)is a promising technology for controlling coal burst caused by thick and hard roofs in China.However,challenges remain regarding the MFHW control mechanism of coal burst and assessment of the associated fracturing effects.In this study,these challenges were investigated through numerical modelling and field applications,based on the actual operating parameters of MFHW for hard roofs in a Chinese coal mine.A damage parameter(D)is proposed to assess the degree of hydraulic fracturing in the roof.The mechanisms and effects of MFHW for controlling coal burst are analyzed using microseismic(MS)data and front-abutment stress distribution.Results show that the degree of fracturing can be categorized into lightly-fractured(D≤0.3),moderately fractured(0.3<D≤0.6),well-fractured(0.6<D≤0.9),and over-fractured(0.9<D≤0.95).A response stage in the fracturing process,characterized by a slowdown in crack development,indicates the transition to a wellfractured condition.After MFHW,the zone range and peak value of the front-abutment stress decrease.Additionally,MS events shift from near the coal seam to the fractured roof layers,with the number of MS events increases while the average MS energy decreases.The MFHW control mechanisms of coal bursts involve mitigating mining-induced stress and reducing seismic activity during longwall retreat,ensuring stresses remain below the ultimate stress level.These findings provide a reference for evaluating MFHW fracturing effects and controlling coal burst disasters in engineering.

Characteristics and demographic factors of traditional Chinese medicine constitution types among elderly individuals in China:A national multistage cluster random study Author links open overlay panel

Objective:To reveal the distribution characteristics and demographic factors of traditional Chinese medicine(TCM)constitution among elderly individuals in China.Methods: Elderly individuals from seven regions in China were selected as samples in this study using a multistage cluster random sampling method.The basic information questionnaire and Constitution in Chinese Medicine Questionnaire(Elderly Edition)were used.Descriptive statistical analysis,chi-squared tests,and binary logistic regression analysis were used.Results: The single balanced constitution(BC)accounted for 23.9%.The results of the major TCM constitution types showed that BC(43.2%)accounted for the largest proportion and unbalanced constitutions ranged from 0.9%to 15.7%.East China region(odds ratio[OR]=2.097;95%confidence interval[CI],1.912 to 2.301),married status(OR=1.341;95%CI,1.235 to 1.457),and managers(OR=1.254;95%CI,1.044 to 1.505)were significantly associated with BC.Age>70 years was associated with qi-deficiency constitution and blood stasis constitution(BSC).Female sex was significantly associated with yang-deficiency constitution(OR=1.646;95%CI,1.52 to 1.782).Southwest region was significantly associated with phlegm-dampness constitution(OR=1.809;95%CI,1.569 to 2.086).North China region was significantly associated with inherited special constitution(OR=2.521;95%CI,1.569 to 4.05).South China region(OR=2.741;95%CI,1.997 to 1.3.763),Central China region(OR=8.889;95%CI,6.676 to 11.835),senior middle school education(OR=2.442;95%CI,1.932 to 3.088),and managers(OR=1.804;95%CI,1.21 to 2.69)were significantly associated with BSC.Conclusions: This study defined the distribution characteristics and demographic factors of TCM constitution in the elderly population.Adjusting and improving unbalanced constitutions,which are correlated with diseases,can help promote healthy aging through the scientific management of these demographic factors.

B-Spline曲线聚风装置直线翼垂直轴风力机启动性能数值模拟

为了提升直线翼垂直轴风力机的启动性能,基于B-Spline曲线生成方法,提出一种具有流线型轮廓的聚风装置,将其分别安装在风轮顶端和底端,用以提升风轮附近的来流风速,使风轮汲取更多风能,达到更易启动的特点.选取聚风装置的5个结构参数进行设计:聚风装置与风轮间隙距离ΔL、底圆半径R_(1)、顶圆半径R_(2)、入口角度α_(1)和出口角度α_(2).设计方法采用二次旋转正交组合筛选最优模型,通过三维数值模拟研究聚风装置参数对直线翼垂直轴风力机启动性能的影响,获得了最佳外形参数组合.此外,对有无加装聚风装置的直线翼垂直轴风力机进行了静态三维数值模拟.结果表明,通过添加具有外凸流线型轮廓的聚风装置,直线翼垂直轴风力机的启动性能有显著提升.在风速较低的情况下,性能改善更加明显.聚风装置可使直线翼垂直轴风力机的平均启动力矩系数最大增加38.8%,峰值平均启动力矩系数最大可增加31.2%.

Comprehensive evaluation of chemical breakers for multistage network ultra-high strength gel

Polymer gels have been accepted as a useful tool to address many sealing operations such as drilling and completion,well stimulation,wellbore integrity,water and gas shutoff,etc.Previously,we developed an ultra-high strength gel(USGel)for medium to ultra-low temperature reservoirs.However,the removal of USGel is a difficult problem for most temporary plugging operations.This paper first provides new insights into the mechanism of USGel,where multistage network structure and physical entanglement are the main reasons for USGel possessing ultra-high strength.Then the effects of acid breakers,encapsulated breakers,and oxidation breakers(including H_(2)O_(2),Na_(2)S_(2)O_(8),Ca(ClO)_(2),H_(2)O_(2)+NaOH,Na_(2)S_(2)O_(8)+NaOH,and Ca(ClO)_(2)+NaOH)were evaluated.The effects of component concentration and temperature on the breaking solution were studied,and the corrosion performance,physical simulation and formation damage tests of the breaking solution were carried out.The final formulation of 2%-4%NaOH+4.5%-6%H_(2)O_(2) breaking solution was determined,which can make USGel completely turn into water at 35e105C.The combinations of“acid t breaking solution”,“acid+encapsulated breaker”and“encapsulated breaker+breaking solution”were evaluated for breaking effect.The acid gradually reduced the volume of USGel,which increased the contact area between breaking solution and USGel,and the effect of“4%acid+breaking solution”was 23 times higher than that of breaking solution alone at 35C.However,the acid significantly reduced the strength of USGel.This paper provides new insights into the breaking of high-strength gels with complex network structures.

Multistage Triaxial Behavior of Shallow Landslide Hazard Site Soil of Rangamati Sadar Area, Bangladesh

The soil samples were collected from a shallow landslide hazard site of the Rangamati Sadar in Bangladesh to determine the shear strength properties of the soil. Multistage triaxial consolidation undrained test has become worldwide more accepted to determine the shear strength parameters. Multistage triaxial undrained tests were performed on five samples taken from five different depths of boreholes. Samples were evaluated under two natural conditions and three remolded situations. Samples were consolidated before shearing at confining pressures from 50 kPa to 1200 kPa. All the test results are discussed in terms of deviator stress versus axial strain, mean effective stress versus deviator curves, stress ratio versus axial strain, and excess p. w. p. versus axial strain curves. The samples consolidated at low effective stress first displayed peak positive values of excess p. w. p., followed by increased strains due to sample bulging failure, and only a few samples formed a shear surface failure. The strength parameters were estimated using the maximum deviator stress as the failure criterion i.e. the overall value of the cohesion is 20 kPa and the friction angle is 34°. Hence, the critical state line has been constructed and the critical state parameters have been calculated. The critical state stress ratio M was calculated to be 0.036. The shear strength of soil is one of the significant mechanical properties that are thoroughly used to assess the landslide and liquefaction potentiality of the soil.

基于B-spline的路径规划与轨迹跟踪研究

为满足局部路径规划换道路径下的特性和提高智能驾驶车辆在多种变曲率条件下的路径跟踪精度和稳定性,采用贝塞尔曲线、B-spline等路径规划换道条件下的方法,分别在圆形轨迹、8字形轨迹、S形轨迹、正弦曲线形轨迹路径下,基于MATLAB对4类路径跟踪算法进行分析,得出最合理的B-spline路径规划和跟踪算法。结果表明,B-spline算法在换道点和并道点曲率为0,满足换道条件的要求;MPC算法在正弦轨迹下比其他算法平均误差小约48.6%,在圆形轨迹下比其他算法平均误差小约84%,说明该算法在多种轨迹下都具有很好的跟踪性,能在一定程度上保证智能驾驶汽车的安全性和稳定性,为今后智能车辆路径规划和轨迹跟踪控制研究提供参考。

Multistage Stochastic Programming Model for the Portfolio Problem of a Property-Liability Insurance Company

The current portfolio model for property-liability insurance company is only single period that can not meet the practical demands of portfolio management, and the purpose of this paper is to develop a multiperiod model for its portfolio problem. The model is a multistage stochastic programming which considers transaction costs, cash flow between time periods, and the matching of asset and liability; it does not depend on the assumption for normality of return distribution. Additionally, an investment constraint is added. The numerical example manifests that the multiperiod model can more effectively assist the property-liability insurer to determine the optimal composition of insurance and investment portfolio and outperforms the single period one.

基于二维B-splines方法研究强磁场中类氢离子He+的低能能级

采用改进的二维B-spline方法在柱坐标系下研究了强磁场下类氢离子He^(+)的结构和电子空间几率密度,计算包含三种对称性0^(+)、0^(-)和(^(-)1)^(+)共10个本征态1 0^(+)、2 0^(+)、ν 0^(-)(ν=1~4)和ν(-1)^(+)(ν=1~4)的能级,选定磁感应强度分别为0、0.001、0.003、0.005、0.007、0.010、0.030、0.050、0.070、0.100、0.200、0.300、0.500、0.700和1.000 a.u.。计算结果表明,类氢离子He^(+)的能级在强磁场中发生劈裂,简并度消除,得到了各个能级随磁感应强度变化规律,并且发现随着磁感应强度的增加能级高低会改变,甚至会发生能级翻转现象;定量地研究了类氢离子He^(+)的基态1 0^(+)和激发态3 0^(-)几率密度分布随磁感应强度的变化规律,并与氢原子进行比较。本研究部分计算结果与他人研究结果十分吻合,有助于进一步理解其他复杂原子的电子运动行为。

Multistage Extension and Age Dating of the Xiaoqinling Metamorphic Core Complex,Central China

Abstract There are two extensional systems in the Xiaoqinling metamorphic core complex (XMCC). One is the detachment fault system developed along the peripheries of the XMCC, which extended in an ESE-WNW direction and whose upper plate moved towards the WNW. The other extensional system includes the retrograde shear zones and normal faults developed within the XMCC, which represent the collapse of the XMCC. Ar-Ar and K-Ar dating shows that the extension of the detachment fault system continued from 135 to 123 Ma, i.e. in the late stage of its evolution at about 127 Ma. The collapse represented by the extensional system within the XMCC was operative during 120–106 Ma, and its main activity occurred about 116 Ma ago. These suggest that the XMCC experienced two extensional stages in its evolution, i.e., the syn-orogenic regional extension and post-orogenic collapse extension.

Bayesian synthetic evaluation of multistage reliability growth with instant and delayed fix modes

In the multistage reliability growth tests with instant and delayed fix modes, the failure data can be assumed to follow Weibull processes with different parameters at different stages. For the Weibull process within a stage, by the proper selection of prior distribution form and the parameters, a concise posterior distribution form is obtained, thus simplifying the Bayesian analysis. In the multistage tests, the improvement factor is used to convert the posterior of one stage to the prior of the subsequent stage. The conversion criterion is carefully analyzed to determine the distribution parameters of the subsequent stage＇s variable reasonably. Based on the mentioned results, a new synthetic Bayesian evaluation program and algorithm framework is put forward to evaluate the multistage reliability growth tests with instant and delayed fix modes. The example shows the effectiveness and flexibility of this method.

Experimental mass transfer coefficients in a pilot plant multistage column extractor

The volumetric overall mass transfer coefficients in a multistage column have been measured using axial dispersion model for toluene–acetone–water system. The effect of operating parameters on the volumetric overall mass transfer coefficients has been investigated for both mass transfer directions. The results show that the mass transfer performance is strongly dependent on rotor speed and mass transfer direction, although only slightly dependent on phase flow rates. In addition, empirical correlations to predict the overall mass transfer coefficients have been developed. The proposed correlations based on dimensionless numbers can be considered as a useful tool for the possible scale up of the multistage column extractor.

Multistage Enrichment of the Sawafuqi Uranium Deposit: New Insights into Sandstone-hosted Uranium Deposits in the Intramontane Basins of Tian Shan, China

Meso-Cenozoic intracontinental orogenic processes in the Tian Shan orogenic belt have significant effect on the sandstone-hosted uranium deposits in the intramontane basins and those adjacent to the orogen. The Sawafuqi uranium deposit, which is located in the South Tian Shan orogenic belt, is investigated to reveal the relationships between uranium mineralization and orogenies. Recent exploration results show that the Sawafuqi uranium deposit has tabular, stratiform, quasi-stratiform, and lens-like orebodies and various geological characteristics different from typical interlayer oxidation zone sandstone-hosted uranium deposits. Systematic studies of ore samples from the Sawafuqi uranium deposit using a variety of techniques, including thin section observation, a-track radiograph, electron microprobe and scanning electron microscope, suggest that uranium mineralization is closely related to pyrite and organic matter. Mineralization-related alterations in the host rocks are mainly silicification and argillation including kaolinite, illite （and illite-smectite mixed layer） and chlorite. Tree stages of mineralization were identified in the Sawafuqi uranium deposit： （i） uranium-bearing detritus and synsedimentary initial pre-enrichment; （ii） interlayer oxidization zone uranium mineralization; and （iii） vein-type uranium mineralization. The synsedimentary uranium pre-enrichment represents an early uranium enrichment in the Sawafuqi uranium deposit, and interlayer oxidation zone uranium mineralization formed the main orebodies, which are superimposed by the vein-type uranium mineralization. Combining the results of this study with previous studies on the Meso-Cenozoic orogenies of South Tian Shan, it is proposed that the synsedimentary uranium pre-enrichment of the Sawafuqi uranium deposit was caused by Triassic Tian Shan uplift, and the interlayer oxidation zone uranium mineralization occurred during the Eocence-Oligocene period, when tectonism was relatively quiet, whereas the vein-type uranium mineralization took place in relation to the strong orogeny of South Tian Shan since Miocene.

FINITE ELEMENT SIMULATION AND OPTIMIZATION OF MULTISTAGE WARM/HOT FORMING FOR OUTER RACE

A multistage warm/hot forming is simulated for the cross grove outer race ofconstant velocity joint, using a thermo-mechanical coupled rigid viscoplastic finite element method,and specially some problem for process development and die design are analyzed. A forming testshows that computed results have good agreement with experimental results. Above obtained resultscan be applied to development of multistage warm/hot forming process and die design for outer race.

Variable selection-based SPC procedures for high-dimensional multistage processes

Monitoring high-dimensional multistage processes becomes crucial to ensure the quality of the final product in modern industry environments. Few statistical process monitoring(SPC) approaches for monitoring and controlling quality in highdimensional multistage processes are studied. We propose a deviance residual-based multivariate exponentially weighted moving average(MEWMA) control chart with a variable selection procedure. We demonstrate that it outperforms the existing multivariate SPC charts in terms of out-of-control average run length(ARL) for the detection of process mean shift.

Charcoal Production via Multistage Pyrolysis

Interests in charcoal usage have recently been re-ignited because it is believed that charcoal is a muchbetter fuel than wood. The conventional charcoal production consumes a large amount of energy due to the prolonged heating time and cooling time which contribute to the process completing in one to several days. Wood py-rolysis consists of both endothermic and exothermic reactions as well as the decomposition of the different components at different temperature range （hemicellulose： 200-260℃; cellulose： 240-350℃ and lignin： 280-500℃）. Inthis study we propose a multistagepyrolysis which is an approach to carry out pyrolysis with multiple heating stages so as to gain certain processing benefits. We propose a three-stage approach which includes rapid stepwise heating stage to a variable target temperatures of 250 ℃, 300℃, 350 ℃ and 400 ℃, slow and gradual heatingstage to a tinal temperature of 400℃ and adiabatic with cooling stage. The multi-stage pyrolysis process can save 30% energy and the processing time by using a first temperature target of 300 ℃and heating rate of 5℃.min-1 to produce a fixed-carbon yield of 25.73% as opposed to the base case with a fixed-carbon yield of23.18%.

Microstructure Design of High-Entropy Alloys Through a Multistage Mechanical Alloying Strategy for Temperature-Stable Megahertz Electromagnetic Absorption

Developing megahertz(MHz)electromagnetic wave(EMW)absorption materials with broadband absorption,multi-temperature adaptability,and facile preparation method remains a challenge.Herein,nanocrystalline FeCoNiCr_(0.4)Cu_(0.2) high-entropy alloy powders(HEAs)with both large aspect ratios and thin intergranular amorphous layers are constructed by a multistage mechanical alloying strategy,aiming to achieve excellent and temperature-stable permeability and EMW absorption.A single-phase face-centered cubic structure with good ductility and high crystallinity is obtained as wet milling precursors,via precisely controlling dry milling time.Then,HEAs are flattened to improve aspect ratios by synergistically regulating wet milling time.FeCoNiCr_(0.4)Cu_(0.2) HEAs with dry milling 20 h and wet milling 5 h(D20)exhibit higher and more stable permeability because of larger aspect ratios and thinner intergranular amorphous layers.The maximum reflection loss(RL)of D20/SiO_(2) composites is greater than-7 dB with 5 mm thickness,and EMW absorption bandwidth(RL<-7 dB)can maintain between 523 and 600 MHz from-50 to 150℃.Furthermore,relying on the“cocktail effect”of HEAs,D20 sample also exhibits excellent corrosion resistance and high Curie temperature.This work provides a facile and tunable strategy to design MHz electromagnetic absorbers with temperature stability,broadband,and resistance to harsh environments.

Improved Quality Prediction Model for Multistage Machining Process Based on Geometric Constraint Equation

Product variation reduction is critical to improve process efficiency and product quality, especially for multistage machining process（MMP）. However, due to the variation accumulation and propagation, it becomes quite difficult to predict and reduce product variation for MMP. While the method of statistical process control can be used to control product quality, it is used mainly to monitor the process change rather than to analyze the cause of product variation. In this paper, based on a differential description of the contact kinematics of locators and part surfaces, and the geometric constraints equation defined by the locating scheme, an improved analytical variation propagation model for MMP is presented. In which the influence of both locator position and machining error on part quality is considered while, in traditional model, it usually focuses on datum error and fixture error. Coordinate transformation theory is used to reflect the generation and transmission laws of error in the establishment of the model. The concept of deviation matrix is heavily applied to establish an explicit mapping between the geometric deviation of part and the process error sources. In each machining stage, the part deviation is formulized as three separated components corresponding to three different kinds of error sources, which can be further applied to fault identification and design optimization for complicated machining process. An example part for MMP is given out to validate the effectiveness of the methodology. The experiment results show that the model prediction and the actual measurement match well. This paper provides a method to predict part deviation under the influence of fixture error, datum error and machining error, and it enriches the way of quality prediction for MMP.

Design of Computationally Efficient Sharp FIR Filter Utilizing Modified Multistage FRM Technique for Wireless Communications Systems

Modern wireless communications gadgets demand multi-standard communications facilities with least overlap between different input radio channels. A sharp digital filter of extremely narrow transition-width with lower stop band ripples offers alias-free switching among the preferred frequency bands. A computationally competent low pass filter (LPF) structure based on the multistage frequency response masking (FRM) approach is proposed for the design of sharp finite impulse response (FIR) filters which are suitable for wireless communications applications. In comparison of basic FRM with other existing multistage FRM structures, the proposed structure has a narrow transition bandwidth and higher stop band attenuation with significant reduction in terms of the number of computational steps. A design example is incorporated to demonstrate the efficiency of the proposed approach. Simulation results establish the improvement of the proposed scheme over other recently published design strategies.