Study of the Diffusion Behavior of Seawater Absorption in Multi-Walled Carbon Nanotubes/Halloysite Nanotubes Hybrid Nanofillers Modified Epoxy-Based Glass/Carbon Fiber Composites

In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.

Electroless deposition of Cu on multiwalled carbon nanotubes

Copper has been deposited on the surface of multiwailed carbon nanombes （MWNTs） and inside MWNTs by electroless deposition. The as-prepared Cu-MWNT composite materials have been characterized by X-ray diffractometer （XRD）, transmission electron microscopy （TEM）, and electrochemical measurement. XRD analyses showed that Cu was a face-centered cubic （fcc） structure. The average size of Cu was calculated by Scherrer＇s formula from XRD data, and it was 11 nm. TEM revealed that Cu grains on the surface of MWNTs were uniform with the sizes of about 30-60 nm. The electrochemical measurement indicated that Cu-MWNT composite materials possessed fine electron conductivity.

Sensitive determination of fenpropathrin,cyhalothrin and deltamethrin in environmental water samples using multiwalled carbon nanotubes cartridge prior to HPLC

This paper described a new method for the trace determination of fenpropathrin, cyhalothrin and deltamethrin using multiwalled carbon nanotubes （MWCNTs） cartridge. Important parameters, such as the sample pH, eluent and its volume, sample flow rate and sample volume were investigated in detail. The linear ranges, the detection limits, and precisions （R.S.D.） were in the range of 0.1- 40 μg L^-11, 1.34.3 ng L^-1 and 2.3-2.8%, respectively. The performance of the proposed method was validated with real water samples, and the spiked recoveries were in the range of 91.7-117.8%, respectively. The experimental results demonstrated that the proposed method was an excellent alternative for the routine analysis of such pollutants in environmental samples. 2007 Qing Xiang Zhou. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Photoluminescence of multiwalled carbon nanotubes excited at different wavelengths

In this paper the multiwalled carbon nanotubes （MWNTs） were synthesized by a chemical vapour deposition and the SEM graph shows that the sample has good construction. The micro-Raman spectrum shows the characteristic line of the MWNTs and an additional line produced by the defects on the outer surface of MWNTs. The photoluminescence （PL） spectra observed experimentally are variable under different excitation wavelengths and the strong excitation wavelength dependence of luminescence indicates a distribution of emitters which include electron π in excited states and the Van Hove singularities. The absorption spectra confirm the transition channels which are consistent with the PL emission.

Application of multiwalled carbon nanotubes treated by potassium permanganate for determination of trace cadmium prior to flame atomic absorption spectrometry

In this study we investigated the enrichment ability of oxidized multiwalled carbon nanotubes （MWCNTs） and established a new method for the determination of trace cadmium in environment with flame atomic absorption spectrometry. The MWCNTs were oxidized by potassium permanganate under appropriate conditions before use as preconcentration packing. Parameters influencing the recoveries of target analytes were optimized. Under optimal conditions, the target analyte exhibited a good linearity （R^2=0.9992） over the concentration range 0.5-50 ng/ml. The detection limit and precision of the proposed method were 0.15 ng/ml and 2.06%, respectively. The proposed method was applied to the determination of cadmium in real-world environmental samples and the recoveries were in the range of 91.3%-108.0%. All these experimental results indicated that this new procedure could be applied to the determination of trace cadmium in environmental waters.

Self-Decoration of PtNi Alloy Nanoparticles on Multiwalled Carbon Nanotubes for Highly Efficient Methanol Electro-Oxidation

A simple one-pot method was developed to prepare Pt Ni alloy nanoparticles,which can be self-decorated on multiwalled carbon nanotubes in [BMIm][BF4] ionic liquid.The nanohybrids are targeting stable nanocatalysts for fuel cell applications.The sizes of the supported Pt Ni nanoparticles are uniform and as small as 1–2 nm.Pt-to-Ni ratio was controllable by simply selecting a Pt Ni alloy target.The alloy nanoparticles with Pt-to-Ni ratio of 1:1 show high catalytic activity and stability for methanol electro-oxidation.The performance is much higher compared with those of both Pt-only nanoparticles and commercial Pt/C catalyst.The electronic structure characterization on the Pt Ni nanoparticles demonstrates that the electrons are transferred from Ni to Pt,which can suppress the CO poisoning effect.

New amperometric glucose biosensor by entrapping glucose oxidase into chitosan/nanoporous ZrO_2/multiwalled carbon nanotubes nanocomposite film

A new nanocomposite material for construction of glucose biosensor was prepared. The biosensor was formed by entrapping glucose oxidase(Gox) into chitosan/nanoporous ZrO2/multiwalled carbon nanotubes nanocomposite film. In this biosensing thin film, the multiwalled carbon nanotubes can effectively catalyze hydrogen peroxide and nanoporous ZrO2 can enhance the stability of the immobilized enzyme. The resulting biosensor provides a very effective matrix for the immobilization of glucose oxidase and exhibits a wide linear response range from 8 μmol/L to 3 mmol/L with a correlation coefficient of 0.994 for the detection of glucose. And the response time and detection limit of the biosensor are determined to be 6 s and 3.5 μmol/L, respectively. Another attractive characteristic is that the biosensor is inexpensive, stable and reliable.

Laccase biosensor using magnetic multiwalled carbon nanotubes and chitosan/silica hybrid membrane modified magnetic carbon paste electrode

A simple and rapid strategy to construct laccase biosensor for determination of catechol was investigated. Magnetic multiwalled carbon nanotubes (MMCNT) which possess excellent capability of electron transfer were prepared by chemical coprecipitation method. Scanning electron microscope (SEM) and vibrating sample magnetometer (VSM) were used to identify its surfacetopography and magnetization, respectively. Laccase was immobilized on the MMCNT modified magnetic carbon paste electrode by the aid of chitosan/silica (CS) hybrid membrane. Using current-time detection method, the biosensor shows a linear response related to the concentration of catechol in the range from 10-7 to 0.165×10-3 mol/L. The corresponding detection limit is 3.34×10-8 mol/L based on signal-to-noise ratios (S/N) ≥3 under the optimized conditions. In addition, its response current retains 90% of the original after being stored for 45 d. The results indicate that this proposed strategy can be expected to develop other enzyme-based biosensors.

Highly conjugated water soluble CdSe quantum dots to multiwalled carbon nanotubes

Highly conjugated multiwalled carbon nanotube-quantum dot heterojunctions were synthesized by ethylene carbodiimide coupling procedure. The functional multiwalled carbon nanotube with carboxylic groups on sidewall could react with the amino group of L-cysteine capped CdSe quantum dots and then resulted in nanotube-quantum dot heterojunctions. Scanning electron microscopy was used to characterize the heterojunctions.

Adsorption of Silver Nanoparticles from Aqueous Solution by Multiwalled Carbon Nanotubes

Silver nanoparticles (AgNPs) are becoming an emerging pollutant of the environment. In this study, the efficacy of Multiwalled carbon nanotubes (MWCNTS) to remove AgNPs from aqueous solution at a concentration of 250 and 500 mg/100 ml MWCNTS was investigated. The results showed that the adsorption of AgNPs by 250 and 500 mg/100 ml MWCNTS after a contact time of 10 min., 30 min., 60 min., 120 min. and 240 min was 33.95%, 34.36%, 40.32%, 45.33%, 58.53% and 57.29%, 61.27%, 64.89%, 87.21%, 88.58%, respectively. The statistical analysis of data showed that, after adding 250 and 500 mg/100 ml MWCNTS, the total residues of AgNPs were significantly reduced in all MWCNTS exposed samples when compared to the control groups (P < 0.05). Moreover, at the two used concentrations, there were significant differences between 240 min. and all other contact times. The result concluded that the removal percent of AgNPs from aqueous solution was increased with the increase in contact time and concentrations of MWCNTS. Additionally, MWCNTS are expected to be potential adsorbent in the future due to their high removal capacity of nano-sized silver.

Removal of Lead Ions from Wastewater Using Functionalized Multiwalled Carbon Nanotubes with Tris(2-Aminoethyl)Amine

Recently, many attempts have been made to use carbon nanotubes in analytical chemistry, especially in adsorption of heavy metal ions from water. In this study, multiwalled carbon nanotubes (MWCNTs) were functionalized with tris(2-aminoethyl) amine. The functionalized nanoparticles were characterized using Fourier transform infrared (FTIR), thermal gravimetric analyzer (TGA), elemental analysis, and Raman spectroscopy. The results revealed that the functionalization reaction was successfully accomplished. Lead adsorption from water was carried out using functionalized MWCNTs and measured by flame atomic absorption spectrometry (FAAS). The effects of pH, shaking time, initial metal ion concentration, and adsorbent dosage on the adsorption process were studied via batch method. The results obtained showed that removal of lead ions strongly depended on the pH. Desorption study revealed that lead ions adsorbed on the functionalized MWCNTs could be desorbed at pH 3 due to breakage of complexes formed on the sorbent surface. Maximum adsorption capacity of the sorbent under the optimal conditions was 43 mg/g. This favorable adsorption capacity suggests that functionalized carbon nanotubes can be applied for removal of lead from water solutions. The data obtained were fitted with the Langmuir and Freundlich isotherm adsorption models and Langmuir model showed better agreement with the experimental data.

Development of a reversed dispersive based graphene functionalized with multiwalled carbon nanotubes for detection ofβ2-agonists in pork by high-performance liquid chromatography

A reliable and inexpensive pretreatment procedure in the determination ofβ2-agonists in pork was developped.The procedure used a nanocomposite of multiwalled carbon nanotubes(CNTs)functionalized with graphene(rGO)as the reversed dispersive sorbent.It was analyzed after purification by highperformance liquid chromatography,the extraction time and the properties of the nanocomposite were optimized.Under optimized conditions,present method has linear response over concentration range of 0.5–50 ng/mL in pork samples with a satisfactory detection limit close to 0.1 ng/mL.The precisions of the current method(coefficient of variation)are lower than 5%,while recoveries are more than 98.3%.The nanocomposite exhibited high adsorptivity,long-term storage stability,satisfactory anti-interfering activity and high selectivity toward2-agonists compared with those of rGO and CNTs.

Electrochemical Determination of Reduced Glutathione at Multiwalled Carbon Nanotubes/Poly(bromocresol green) Modified Glassy Carbon Electrode

A multiwalled carbon nanotubes/poly(bromocresol green) modfied glassy carbon electrode (MWNTs-PBG/GCE) was used to investigate the electrochemical behavior of reduced glutathione(GSH). GSH showed an irreversible oxidation process on MWNTs-PBG/GCE with an oxidation peak at 0.77 V(vs. SCE) in a phosphate buffer solution(pH=4.0). The kinetic parameters of the electrochemical behavior of GSH on MWNTs-PBG/GCE were calculated. Under the optimal conditions and with the help of amperometric method, a linear relationship was obtained between the oxidation peak current and GSH concentration in the range from 2×10-7 mol/L to 5×10-6 mol/L with the detection limit as 1×10-8 mol/L(signal-to-noise ratio of 3). The current reached the steady-state current within about 5 s. The modified electrode surface had very good reproducibility and stability.

Nanostructured multilayer thin films of multiwalled carbon nanotubes/gold nanoparticles/glutathione for the electrochemical detection of dopamine

In the present study, multiwalled carbon nanotubes（MWCNTs）, gold nanoparticles（AuN Ps）, and glutathione（GSH） were used to fabricate multilayer nanoscale thin films. The composite thin films were fabricated by layer-by-layer technique as the films were constructed by the alternate deposition of cationic and anionic polyelectrolytes. The MWCNTs were modified via a noncovalent surface modification method using poly（diallydimethylammonium chloride） to form a cationic polyelectrolyte. An anionic polyelectrolyte was prepared by the chemical reduction of HAuCl_4 using sodium citrate as both the stabilizing and reducing agent to form anionic AuN Ps. GSH was used as an electrocatalyst toward the electro-oxidation of dopamine. The constructed composite electrode exhibits excellent electrocatalytic activity toward dopamine with a short response time and a wide linear range from 1 to 100 mmol/L. The limits of detection and quantitation of dopamine are（0.316 ± 0.081） mmol/L and（1.054 ± 0.081） mmol/L, respectively. The method is satisfactorily applied for the determination of dopamine in plasma and urine samples to obtain the recovery in the range from 97.90% to 105.00%.

Development of Chitosan/Poly(L-Lactide)/Multiwalled Carbon Nanotubes Scaffolds for Bone Tissue Engineering

This work focuses to improve the mechanical properties and investigates the growth of osteoblasts on a degradable chitosan/poly(L-lactide)/carbon nanotubes composite for tissue engineering. The morphological and mechanical properties characterizations were performed using scanning electronic microscopy (SEM) and rheometrics analysis system (RSA). Osteoblasts differentiation was determined by alkaline phosphatase activity, total number cells by an Alamar Blue assay, cell attachment and proliferation were visualized qualitatively using SEM, mineralization was characterized by transformed infrared spectroscopy, energy dispersive spectroscopy, and X-ray diffraction. The results suggest that the chitosan/poly(L-lactide)/multiwalled carbon nanotubes composites exhibit the ability to promote cell adhesion, proliferation, and differentiation on their surface.

Nanobiocomposite Electrochemical Biosensor Utilizing Synergic Action of Neutral Red Functionalized Carbon Nanotubes

An amperometric hydrogen peroxide biosensor using a nanobiocomposite based on neutral red modified carbon nanotubes and co-immobilized glucose oxidase and horseradish peroxidase is reported. Modification of the nanobiocomposite electrode with neutral red resulted in a sensitive, low-cost and reliable H_2O_2 sensor. The use of carbon nanotubes, as the conductive part of the composite, facilitated fast electron transfer rates. The biosensor was characterized for the influence of p H, potential and temperature. A remarkable feature of the biosensor is the detection of H_2O_2 at low applied potentials where the noise level and interferences are minimal. The sensor has a fast steady-state measuring time of 10 s with a quick response(2 s). The biosensor showed a linear range from 15 n M to 45 m M of H_2O_2 and a detection limit of 5 n M. Nafion, which is used as a binder, makes the determination free from other electroactive substances. The repeatability, reproducibility,stability and analytical performance of the sensor are very good.

具有宽带微波吸收性能的MWCNTs/SiC纳米复合材料的点击化学法制备及性能研究

多壁碳纳米管/碳化硅(MWCNTs/SiC)纳米复合材料,以电阻型微波吸收剂MWCNTs为基体材料,电介质型微波吸收剂碳化硅作为损耗介质通过点击反应制备。采用XRD,IR,XPS,TG,SEM,矢量网络分析仪进行该复合材料的结构表征和微波吸收性能测试。此外还探讨了不同投料比,对复合材料的微波吸收性能的影响。实验结果表明:MWCNTs/SiC二元纳米复合材料由点击法成功制备;当投料的质量比MWCNTs:SiC=1∶1时,MWCNTs/SiC二元纳米复合材料在2.0 mm的厚度下,其最小反射损耗(RLmin)达到了-44.96 dB,在1.5 mm的超薄厚度下有效吸收的最宽带宽(RL<-10 dB)达到5.04 GHz(从12.66~17.93 GHz,覆盖了Ku波段的87.8%);此外,MWCNTs/SiC二元纳米复合材料可以在整个X波段有效吸收电磁波,厚度范围为2.0~2.5 mm。并且,通过调整吸收层的厚度,几乎可以有效覆盖所有的C、X和Ku波段。MWCNTs和SiC之间通过点击反应以共价键连接,分子内部形成导电通道,产生足够的载流子,在外加电场的作用下产生感应电流,也可以衰减电磁波,从而增强对电磁波能量的消耗。