Microstructural analysis of marl stabilized with municipal solid waste and nano-MgO

Municipal solid waste(MSW)is accumulating over elapsed time across the world,and it is observed in many projects associated with weak soils,such as marl.Therefore,effective solutions to the environmental problem are essential.Conventional techniques for stabilizing marl generally use substances such as lime and cement,which could exacerbate pollution.For this,some new stabilizers,e.g.nano-MgO,are used.There are large quantities of marls and MSW in Shiraz City,Iran.The present study aims to evaluate the feasibility of using nano-MgO as a green low-carbon binder to remove MSW from the environment and make construction projects more cost-effective.Consolidated drained shear tests were conducted to evaluate the mechanical behaviors of the nano-MgO treated marl specimens at high normal stresses.The marl specimens containing MSW percentages of 15%,25%,35%,and 45%and nano-MgO percentages of 0.25%,0.5%,0.75%,and 1%,were used.It is found that the marl containing 15%and 25%MSW and 0.5%nano-MgO at 28-d curing can perform cation exchange and form new cementitious products.The soils with merely MSW show good performance due to the removal of the kaolinite and the formation of brucite.However,the soil with 25%MSW and 0.5%nano-MgO shows the same strength enhancement as the specimen with the optimal nano-MgO(0.75%)through the formation of dolomite,with a 20.59%increase in strain energy(SE).

Effects of Using Municipal Solid Waste Incineration Tailings as Lightweight Aggregate on the Mechanical Properties of Specified Density Concrete

Municipal solid waste incineration tailings were used as lightweight aggregate(MSWIT-LA)in the preparation of specified density concrete to study the effects on compressive strength,axial compressive strength,flexural strength,microhardness,total number of pores,pore area,and pore spacing.The results showed that the internal curing and morphological effects induced by an appropriate quantity of MSWIT-LA improved the compressive response of specified density concrete specimens,whereas an excessive quantity of MSWIT-LA significantly reduced their mechanical properties.An analysis of pore structure indicated that the addition of MSWIT-LA increased the total quantity of pores and promoted cement hydration,resulting in a denser microstructure than that of ordinary concrete.The results of a principal component analysis showed that the mechanical response of specified density concrete prepared with 25%MSWIT-LA was superior to that of an equivalent ordinary concrete.It was therefore concluded that MSWIT-LA can be feasibly applied to achieve excellent specified density concrete properties while utilising municipal solid waste incineration tailings to protect the environment and alleviate shortages of sand and gravel resources.

Model Prediction and Optimal Control of Gas Oxygen Content for A Municipal Solid Waste Incineration Process

In the municipal solid waste incineration process,it is difficult to effectively control the gas oxygen content by setting the air flow according to artificial experience.To address this problem,this paper proposes an optimization control method of gas oxygen content based on model predictive control.First,a stochastic configuration network is utilized to establish a prediction model of gas oxygen content.Second,an improved differential evolution algorithm that is based on parameter adaptive and t-distribution strategy is employed to address the set value of air flow.Finally,model predictive control is combined with the event triggering strategy to reduce the amount of computation and the controller's frequent actions.The experimental results show that the optimization control method proposed in this paper obtains a smaller degree of fluctuation in the air flow set value,which can ensure the tracking control performance of the gas oxygen content while reducing the amount of calculation.

Prediction of NO_(x)concentration using modular long short-term memory neural network for municipal solid waste incineration

Air pollution control poses a major problem in the implementation of municipal solid waste incineration(MSWI).Accurate prediction of nitrogen oxides(NO_(x))concentration plays an important role in efficient NO_(x)emission controlling.In this study,a modular long short-term memory(M-LSTM)network is developed to design an efficient prediction model for NO_(x)concentration.First,the fuzzy C means(FCM)algorithm is utilized to divide the task into several sub-tasks,aiming to realize the divide-and-conquer ability for complex task.Second,long short-term memory(LSTM)neural networks are applied to tackle corresponding sub-tasks,which can improve the prediction accuracy of the sub-networks.Third,a cooperative decision strategy is designed to guarantee the generalization performance during the testing or application stage.Finally,after being evaluated by a benchmark simulation,the proposed method is applied to a real MSWI process.And the experimental results demonstrate the considerable prediction ability of the M-LSTM network.

Bird’s-eye view of recycled solid wastes in road engineering

Recent trends in road engineering have explored the potential of incorporating recycled solid wastes into infrastructures that including pavements,bridges,tunnels,and accessory structures.The utilization of solid wastes is expected to offer sustainable solutions to waste recycling while enhancing the performance of roads.This review provides an extensive analysis of the recycling of three main types of solid wastes for road engineering purposes:industrial solid waste,infrastructure solid waste,and municipal life solid waste.Industrial solid wastes suitable for road engineering generally include coal gangue,fly ash,blast furnace slag,silica fume,and steel slag,etc.Infrastructure solid wastes recycled in road engineering primarily consist of construction&demolition waste,reclaimed asphalt pavements,and recycled cement concrete.Furthermore,recent exploration has extended to the utilization of municipal life solid wastes,such as incinerated bottom ash,glass waste,electronics waste,plastic waste,and rubber waste in road engineering applications.These recycled solid wastes are categorized into solid waste aggregates,solid waste cements,and solid waste fillers,each playing distinct roles in road infrastructure.Roles of solid waste acting aggregates,cements,and fillers in road infrastructures were fully investigated,including their pozzolanic properties,integration effects to virgin materials,modification or enhancement solutions,engineering performances.Utilization of these materials not only addresses the challenge of waste management but also offers environmental benefits aiming carbon neutral and contributes to sustainable infrastructure development.However,challenges such as variability in material properties,environmental impact mitigation,secondary pollution to environment by leaching,and concerns regarding long-term performance need to be further addressed.Despite these challenges,the recycled solid wastes hold immense potential in revolutionizing road construction practices and fostering environmental stewardship.This review delves into a bird’seye view of the utilization of recycled solid wastes in road engineering,highlighting advances,benefits,challenges,and future prospects.

Forecasting the Municipal Solid Waste Using GSO-XGBoost Model

Waste production rises in tandem with population growth and increased utilization.The indecorous disposal of waste paves the way for huge disaster named as climate change.The National Environment Agency(NEA)of Singapore oversees the sustainable management of waste across the country.The three main contributors to the solid waste of Singapore are paper and cardboard(P&C),plastic,and food scraps.Besides,they have a negligible rate of recycling.In this study,Machine Learning techniques were utilized to forecast the amount of garbage also known as waste audits.The waste audit would aid the authorities to plan their waste infrastructure.The applied models were k-nearest neighbors,Support Vector Regressor,ExtraTrees,CatBoost,and XGBoost.The XGBoost model with its default parameters performed better with a lower Mean Absolute Percentage Error(MAPE)of 8.3093(P&C waste),8.3217(plastic waste),and 6.9495(food waste).However,Grid Search Optimization(GSO)was used to enhance the parameters of the XGBoost model,increasing its effectiveness.Therefore,the optimized XGBoost algorithm performs the best for P&C,plastics,and food waste with MAPE of 4.9349,6.7967,and 5.9626,respectively.The proposed GSO-XGBoost model yields better results than the other employed models in predicting municipal solid waste.

The Impact of Solid Waste Generation, Storage and Separation Practices among Households on the Environment in Freetown

As urbanization and population growth continue to increase in Freetown, due to changes in economic, social, environmental, political, and demographic factors, the municipal solid waste (MSW) generation also continues to increase, making its management difficult for the municipal authority. Efficient separation and storage of solid waste at the source of generation can boost resource and energy recovery from MSW. This study examines the municipal solid waste management (MSWM) process, focusing on generation, storage and separation practices among households and their impact on the environment in Freetown. It emphasizes the inclusion of MSWM programs in primary schools to raise public awareness, the implementation of effective waste management practices, and the enforcement of related policies to enhance the MSWM sector, contributing to sustainable MSWM in Freetown. By utilizing both qualitative and quantitative methods, 393 structured questionnaires were administered across three selected sections to collect data on household solid waste storage and separation practices. The analysis employed descriptive statistics, using Origin-Pro9 and MS Excel. The findings show that with a population of 1.53 million people in Freetown, the per capita solid waste generation is 0.58 kg per day. The findings also show that 97% of the households have storage facilities as a result of the increase in awareness and education about the proper storage of solid waste. However, 96% of respondents do not practice separation of solid waste at the source of generation, which has become a concern among researchers in Sierra Leone. Additionally, 88% of respondents are unaware of ISWM principles, with only 12% aware, most of whom have received some education on proper solid waste management. The study recommends improving MSWM in Freetown to protect public health and the environment.

Current Situation Analysis and Suggestions for Solid Waste Management Practices among Households in Freetown

Freetown which is the capital city of Sierra Leone is facing challenges with population growth, urbanization, and industrialization, leading to an increase in municipal solid waste (MSW) generation. The study aims to evaluate MSW generation, composition, and disposal methods, as well as the impact of collection fees, policy implementation, and women’s participation in municipal solid waste management (MSWM). The study used both qualitative and quantitative methods for data collection and analysis. The study administered 393 structured questionnaires in three selected sections to collect data on variables such as family size, education, level of knowledge, etc. The study used door-to-door data collection to determine the rate of solid waste generation, composition, and disposal in 66 households from two of the selected sections and 34 households from the other section to evaluate the current situation of MSWM practices among households in Freetown. The study used a descriptive statistic to analyze the data collected using Origin-Pro9 and MS Excel software. The findings showed that with a 4.2% urban growth rate, Freetown had a population of 1,467,543 in 2023, generating 851 tons of MSW per day, with organic waste accounting for 78% of the total MSW generated. Plastic waste generation also increased from 7.6% in 2020 to 13% in 2023. The study emphasizes the need to sustain the MSWM system by prioritizing solid waste collection fees, policy enforcement, and women’s participation in the MSWM sector. It further suggests and provides recommendations for developing an efficient and sustainable MSWM system in Sierra Leone, including knowledge transfer from countries like China and the US.

Assessing the Factors Influencing Effective Municipal Solid Waste Management System in Barishal Metropolitan Areas

Unorganized municipal solid waste (MSW) disposal system leads to stress on ecosystems and disturbs various nature cycles and human health. Solid waste management all over world is looked as a major challenge to civil bodies, especially in developing countries like Bangladesh. The proper management system of municipal solid waste depends on various factors like social, cultural, financial, political, environmental, physical and institutional and so on. The purpose of this study is to explore the leading factors that affect the solid waste management in Barishal city. For achieving this purpose, this research first has identified the socio-economic, cultural, physical and technical, institutional and environmental factors and then analyzed the factors which affect the solid waste management system in the study area. To achieve the purpose of the study, quantitative method has been used in this research. As a sample of this study, 150 household heads from total household members of the city have been selected randomly by using lottery method. A structured questionnaire has been constructed for collecting quantitative data. The quantitative data have been analyzed in this study by using SPSS Program, and Microsoft Excel. The findings of the study show that all city people know solid waste and solid waste management stakeholders present in the city and waste pickers collect all types of waste in the city and socio-economic, cultural, physical and technical, institutional factors affect the effective solid waste management in the study area where environmental factors have no influence on effective solid waste management in the study area. The study people have a bad impression of the current existing management system of the solid waste and they express their expectations where they mention that if municipal authorities improve the condition of the infrastructure, roads and vehicles;allow more budgets to manage waste;take proper strategies and planning to manage waste smartly like imposing fines, set up rules, then the municipal authorities will be able to manage solid waste properly. Finally, this research has proposed some recommendations that might be helpful for the policy-makers in the study area for making policies and further research regarding solid waste management.

A perspective analysis on municipal solid waste(MSW) energy recovery in China

The paper analysed the current situation of municipal solid waste(MSW) quantity and quality in China and the changing tendencies of its composition. Further more, the energy value of MSW was discussed. To the point of the technical and economic aspects, the feasibility of the energy recovery from MSW was also analysed. The conclusion is that the energy can be effectively recovered through a landfill gas utilization process and the energy produced by an incineration process. Through a suitable energy recovery process, it is possible to improve the economic viability of a MSW treatment process.

Technology of comprehensive disposal and utilization of municipal solid waste (MSW)

The project for treating MSW of 200 tons each day was built in Yibin, Sichuan Province of China. The disposal processes are: separation and selection of usable resources; compost and fermentation of “heavy” organic waste (kitchen, garden composting rubbish); incineration of “light” waste (plastic, paper, wood and bamboo etc.) and landfill of inorganic waste. The thermal energy generated in the process can be used as 1/3 of the whole energy for drying fertilizers. In the process, there is no wastewater drainage, and air emissions can be effectively controlled by a series of measures. The sanitary and environmental indicators of disposal site meet the national standards. This project has worked well for two years. It not only disposes of and reduces the MSW, but also retrieves the resource effectively. The organic fertilizer has been applied in the ten thousand acres of fields, with productivity increase by more than 10%.

Characterisation of Municipal Solid Waste Compost (MSWC) from Selected Indian Cities—A Case Study for Its Sustainable Utilisation

Utilisation of Municipal Solid Waste is important to curb the ever rising demand of scarce land for its disposal. Changing life style patterns, particularly in urban areas, has led to increase in generation of MSW. Municipal solid waste from Indian cities estimated to have 40% - 60% organic matter, which could be recycled as compost. The most suitable way to recycle it with low investment is aerobic composting using windrow method. With the compliance of Municipal Solid Waste (Management and Handling) Rules 2000, many cities in India are making compost with organic portion of MSW. Before applying MSWC for agricultural uses, it is important to inventories heavy metals in compost to assess its toxicity. In the present study the compost samples were quantified for its toxicity from three highly populated cities of India, i.e., Delhi (Capital of India), Ahmedabad (Gujarat) and Bangalore (Karnataka). The MSWC samples were analysed for total heavy metals and in extractable fractions. Few samples were found with higher concentration of metals then the prescribed limits for its application as compost in Indian MSW rules, whereas, samples have not showed significant heavy metals concentration in extractable fractions. Therefore, studied MSW compost samples had demonstrated its suitability to use as green compost.

Hydration Kinetics of Municipal Solid Wastes Incineration(MSWI) Fly Ash-Cement

Hydration heat behavior and kinetics of blended cement containing up to 20% MSWI fly ash were investigated based on its hydration heat evolution rate measured by isothermal calorimeter. Kinetics parameters, N and K, and hydration degree, Ca(OH)2 content, were also calculated and analyzed. According to the experimental results, the induction period was elongated, the second heat evolution peak was in advance, and the third hydration heat peak could be detected due to MSWI fly ash pozzolanic reaction. The hydration reaction rate was controlled by nucleation kinetics in the acceleration period and then by diffusion in the decay period, but in the deceleration period, the hydration experienced a dual controlling reaction of autocatalytic chemical reaction and diffusion. The hydration rate of blended cement was faster. Ca(OH)2 content increased before 14 days.

Exploring Enablers and Barriers to Municipal Solid Waste (MSW) Management Technologies Adoption in the Kingdom of Bahrain

Municipal Solid Waste (MSW) becomes a point of focus globally due to its harmful effects on the environment and human health if it is not managed properly. MSW was proved globally to be used as a resource, and it has a major opportunity in the realm of conversion technologies. Accordingly, this study aims to explore the enablers and barriers to six different MSW management (MSWM) technologies adopted in the Kingdom of Bahrain, in order to ensure the successful adoption of these technologies that are Anaerobic Digestion (AD), Incineration, Pyrolysis, Gasification, Composting and Refused Derived Fuel (RDF). This study provides sufficient information to the decision and policy-makers for the processes of selection and adoption of the MSWM technologies in Bahrain, using a qualitative approach “mainly semi-structured interviews” with experts and then Thematic Analysis using nvivo12 software. The results show that the main themes that enablers and barriers fall under are: political (e.g. national waste management strategy), technical (e.g. segregation at source), managerial (e.g. capacity building), social (e.g. public awareness), economic (e.g. incentives to investment) and environmental (e.g. air quality). This study concluded that in order to succeed in the MSWM technologies adoption, the resulted barriers should be overcome. Furthermore, Incineration was recommended as the best solution to manage MSW which has the least barriers and most enablers in Bahrain as per the experts.

Assessment of Methane Flux from Municipal Solid Waste (MSW) Landfill Areas of Delhi, India

Carbon dioxide, methane and nitrous oxide are the major Greenhouse Gases (GHG’s), which emit from landfill areas and contribute significantly to global warming. Moreover, that the global warming potential of methane is 21 times higher than that of carbon dioxide and it has highest generation (60%) than other gases. Therefore, there is immense concern for its abatement or utilization from landfill areas. Compared to the west, the composition of municipal solid waste (MSW) in developing countries has higher (40% - 60%) organic waste. This would have potential to emit higher GHG’s from per ton of MSW compared to developed world. Beside that landfills areas in India are not planned or en- gineered generally low lying open areas, where MSW is indiscriminate disposed. This leads to uncontrolled emission of trace gases, foul smell, bird menace, ground and surface water pollution etc. Due to scarcity of land in big cities, mu- nicipal authorities are using same landfill for nearly 10 - 20 years. Hence, the possibility of anaerobic emission of GHG’s further increases. In the present paper we had quantified the methane emission from three MSW landfill areas of Delhi i.e., Gazipur, Bhalswa and Okhla. The results showed that the range of methane emission various in winter from 12.94 to 58.41 and in Summer from 82.69 - 293 mg/m2/h in these landfill areas. The paper has also reviewed the literature on methane emission from India and the status of landfill areas in India.

基于Aspen Plus的MSW气化熔融工艺全流程模拟研究

城市固体废物(MSW)气化熔融工艺能够减少二噁英的生成和熔融固化重金属,是一种清洁高效的固体废物处理方式。已有研究多针对MSW的热解特性以及污染物的生成与排放,而对气化熔融工艺系统模块之间的影响和各反应器间物质流、能量流的联动变化过程研究不足。利用Aspen Plus模拟平台,基于吉布斯自由能最小化原理,对MSW气化熔融工艺进行了全流程模拟研究,分析了垃圾干燥温度、垃圾含水率、气化温度、气化介质以及灰熔点对工艺流程节点参数、物质流和能量流的影响,并提出了优化的工艺流程和运行参数。结果表明:在垃圾热解模拟时,垃圾含水率为9%,通过烟气循环能达到能量自给;在相同条件下,以水蒸气作为气化介质的气化效率最高,且在气化温度为850℃,水蒸气当量比为50%时,达到最佳工艺效果;当气化后产生的焦炭在熔融炉内燃烧刚满足灰熔点温度时,灰熔点的升高使气化剂比例、气化气有效气体摩尔流量和碳转化率不断降低。不同工况下的物质流、能量流的变化对实际工程具有指导意义。

Engineering properties for high kitchen waste content municipal solid waste

Engineering properties of municipal solid waste （MSW） depend largely on the waste＇s initial compositionand degree of degradation. MSWs in developing countries usually have a high kitchen waste content（called HKWC MSW）. After comparing and analyzing the laboratory and field test results of physicalcomposition, hydraulic properties, gas generation and gas permeability, and mechanical properties forHKWC MSW and low kitchen waste content MSW （called LKWC MSW）, the following findings wereobtained： （1） HKWC MSW has a higher initial water content （IWC） than LKWC MSW, but the field capacitiesof decomposed HKWC and LKWC MSWs are similar; （2） the hydraulic conductivity and gaspermeability for HKWC MSW are both an order of magnitude smaller than those for LKWC MSW; （3）compared with LKWC MSW, HKWC MSW has a higher landfill gas （LFG） generation rate but a shorterduration and a lower potential capacity; （4） the primary compression feature for decomposed HKWCMSW is similar to that of decomposed LKWC MSW, but the compression induced by degradation ofHKWC MSW is greater than that of LKWC MSW; and （5） the shear strength of HKWC MSW changessignificantly with time and strain. Based on the differences of engineering properties between these twokinds of MSWs, the geo-environmental issues in HKWC MSW landfills were analyzed, including highleachate production, high leachate mounds, low LFG collection efficiency, large settlement and slopestability problem, and corresponding advice for the management and design of HKWC MSW landfills wasrecommended.

Release of volatile organic compounds during bio-drying of municipal solid waste

Three treatments were tested to investigate the release concentrations of volatile organic compounds （VOCs） during the bio-drying of municipal solid waste （MSW） by the aerobic and combined hydrolytic-aerobic processes.Results showed that VOCs were largely released in the first 4 days of bio-drying and the dominant components were：dimethyl disulfide,dimethyl sulfide,benzene,2-butanone,limonene and methylene chloride.Thus,the combined hydrolytic-aerobic process was suggested for MSW bio-drying due to fewer aeration quantities in this phase when compared with the aerobic process,and the treatment strategies should base on the key properties of these prominent components.Malodorous sulfur compounds and terpenes were mainly released in the early phase of bio-drying,whereas,two peaks of release concentrations appeared for aromatics and ketones during bio-drying.Notably,for the combined hydrolytic-aerobic processes there were also high concentrations of released aromatics in the shift from hydrolytic to aerobic stages.High concentrations of released chlorinateds were observed in the later phase.For the VOCs produced during MSW bio-drying,i.e.,malodorous sulfur compounds,terpenes and chlorinateds,their release concentrations were mainly determined by production rates;for the VOCs presented initially in MSW,such as aromatics,their transfer and transport in MSW mainly determined the release concentrations.

Biodrying of municipal solid waste with high water content by combined hydrolytic-aerobic technology

The high water content of municipal solid waste(MSW)will reduce the effciency of mechanical sorting,consequently unfavorable for beneficial utilization.In this study,a combined hydrolytic-aerobic biodrying technology was introduced to remove water from MSW.The total water removals were proved to depend on the ventilation frequency and the temporal span in the hydrolytic stage. The ventilation frequency of 6 times/d was preferable in the hydrolytic stage.The hydrolytic span should not be prolonged more than ...

Environmental monitoring and fuzzy synthetic evaluation of municipal solid waste transfer stations in Beijing in 2001-2006

Transfer station(TS)is an integral part of present-day municipal solid waste(MSW)management systems.To provide information for the incorporation of waste facilities within the current integrated waste management system,the authors measured the existing environmental quality at five MSW TSs.Discharged wastewater,air,and noise were monitored and assayed at the five TSs in Beijing in 2001-2006 during rainy seasons(RSs)and dry seasons(DSs).Except Ammonia(NH_3)and hydrogen sulfide(H_2S),the analytical results of...