Global Research Progress on Municipal Waste and Future Prospect Based on the Cross-national Comparisons

Due to the acceleration of urbanization,the municipal waste(MW)problem has transformed into a global challenge for urb-an sustainability.To elucidate historical trends,current focal points,and future directions in MW research,we conducted a bibliometric analysis and employed knowledge graph visualization to scrutinize a total of 34212 articles,which were published between 1991 and 2021 in the Web of Science(WoS)core database.The results indicated that current major research themes encompass waste classifica-tion and recycling,waste management and public behavior,waste disposal methods and technologies,as well as environmental impact and evaluation.There has been a shift in the research focus from the environmental impacts of waste incineration to sustainable manage-ment related issues.A comparison of research from six typical countries revealed the differences in research priorities and techniques advantages.Scholars from the USA and Britain initiated MW research earlier than other countries and investigated management issues in depth,such as public behavior and willingness to pay.Meanwhile,Japanese,German,and Swedish scholars conducted extensive studies on advanced waste treatment technologies,such as disposal and recycling,risk assessment,and waste-to-energy techniques.Chinese scholars placed particular emphasis on end-of-pipe treatments and their associated environmental impacts.Hotspots and poten-tial future frontiers were identified by burst detection analysis.Keywords with high value of burst index(BI)worldwide are food waste and circular economy.Chinese scholars have put great efforts on waste environmental impact and its recycling technologies,while we’re expecting to further investigating vulnerable population.Furthermore,this study contributes to bridging the regional gap of scientific research among different countries and fostering international collaboration.

Leaching behavior of heavy metals with hydrochloric acid fromfly ash generated in municipal waste incineration plants

The extraction behavior of heavy metals from municipal waste incineration （MWI） fly ash was investigated systematically. The extraction process includes two steps, namely, fly ash was firstly washed with water, and then subjected to hydrochloric acid leaching. The main parameters for water washing process were tested, and under the optimal conditions, about 86% Na, 70% K and 12% Ca were removed from fly ash, respectively. Hydrochloric acid was used for the extraction of valuable elements from the water-washed fly ash, and the optimal extraction was achieved for each heavy metal as follows： 86% for Pb, 98% for Zn, 82% for Fe, 96% for Cd, 62% for Cu, 80% for Al, respectively. And the main compositions of the finally obtained solid residue are Ca2PbO4, CaSi2Os, PbsSiO7, Ca3A12Si3012 and SiO2.

Anaerobic Co-digestion Process Efficiency Estimation in Phases as an Alternative for Municipal Waste Treatment

The incorrect disposal of the waste generated in the municipalities contributes to water and soil contamination,resulting in a real concern in order to find an adequate disposal as well as obtain by-products that can be used to reduce CO2 emissions.Anaerobic digestion turns out to be the most efficient treatment,both in environmental and economic terms.The objective of this study is to evaluate the anaerobic co-digestion process in phases as an alternative for the treatment of municipal waste:sludge from water treatment plants and the biodegradable part of Municipal Solid Waste(MSW),for three HRTs(Hydraulic Retention Times).Testing results show up a max elimination of 70.68%in VS(Volatile Solids)and 74.01%in COD(Chemical Oxygen Demand).With these percentages of elimination on average,15.96 L/d of biogas was produced,for each kg of COD eliminated 0.56 m3 of biogas was produced and for each kg of SV 0.85 m3 and methane of 50.10%.

HVAC Design Strategies for Municipal Waste Incineration Power Plants

In recent years,relevant government departments have achieved the goal of reduction and harmless application through the development and implementation of municipal waste incineration power plants,in order to advocate ecological and environmental protection.At present,in order to further achieve the goal of sustainable development,municipal waste incineration power plants have actively responded to the national call and requirements as well as made overall arrangements for the energy-saving design and optimization design of their internal system.Therefore,with the concept of sustainable development,this paper studies and analyzes the problems of the HVAC design as well as suggests related strategies for municipal waste incineration power plants in order to provide relevant reference.

Microstructural analysis of marl stabilized with municipal solid waste and nano-MgO

Municipal solid waste(MSW)is accumulating over elapsed time across the world,and it is observed in many projects associated with weak soils,such as marl.Therefore,effective solutions to the environmental problem are essential.Conventional techniques for stabilizing marl generally use substances such as lime and cement,which could exacerbate pollution.For this,some new stabilizers,e.g.nano-MgO,are used.There are large quantities of marls and MSW in Shiraz City,Iran.The present study aims to evaluate the feasibility of using nano-MgO as a green low-carbon binder to remove MSW from the environment and make construction projects more cost-effective.Consolidated drained shear tests were conducted to evaluate the mechanical behaviors of the nano-MgO treated marl specimens at high normal stresses.The marl specimens containing MSW percentages of 15%,25%,35%,and 45%and nano-MgO percentages of 0.25%,0.5%,0.75%,and 1%,were used.It is found that the marl containing 15%and 25%MSW and 0.5%nano-MgO at 28-d curing can perform cation exchange and form new cementitious products.The soils with merely MSW show good performance due to the removal of the kaolinite and the formation of brucite.However,the soil with 25%MSW and 0.5%nano-MgO shows the same strength enhancement as the specimen with the optimal nano-MgO(0.75%)through the formation of dolomite,with a 20.59%increase in strain energy(SE).

Effects of Using Municipal Solid Waste Incineration Tailings as Lightweight Aggregate on the Mechanical Properties of Specified Density Concrete

Municipal solid waste incineration tailings were used as lightweight aggregate(MSWIT-LA)in the preparation of specified density concrete to study the effects on compressive strength,axial compressive strength,flexural strength,microhardness,total number of pores,pore area,and pore spacing.The results showed that the internal curing and morphological effects induced by an appropriate quantity of MSWIT-LA improved the compressive response of specified density concrete specimens,whereas an excessive quantity of MSWIT-LA significantly reduced their mechanical properties.An analysis of pore structure indicated that the addition of MSWIT-LA increased the total quantity of pores and promoted cement hydration,resulting in a denser microstructure than that of ordinary concrete.The results of a principal component analysis showed that the mechanical response of specified density concrete prepared with 25%MSWIT-LA was superior to that of an equivalent ordinary concrete.It was therefore concluded that MSWIT-LA can be feasibly applied to achieve excellent specified density concrete properties while utilising municipal solid waste incineration tailings to protect the environment and alleviate shortages of sand and gravel resources.

Model Prediction and Optimal Control of Gas Oxygen Content for A Municipal Solid Waste Incineration Process

In the municipal solid waste incineration process,it is difficult to effectively control the gas oxygen content by setting the air flow according to artificial experience.To address this problem,this paper proposes an optimization control method of gas oxygen content based on model predictive control.First,a stochastic configuration network is utilized to establish a prediction model of gas oxygen content.Second,an improved differential evolution algorithm that is based on parameter adaptive and t-distribution strategy is employed to address the set value of air flow.Finally,model predictive control is combined with the event triggering strategy to reduce the amount of computation and the controller's frequent actions.The experimental results show that the optimization control method proposed in this paper obtains a smaller degree of fluctuation in the air flow set value,which can ensure the tracking control performance of the gas oxygen content while reducing the amount of calculation.

A new complex plant for carbonization and composting of municipal wastes

A new complex plant for carbonization and composting of municipal wastes proposed for Gero City is introduced. The separated combustible waste and non-separated combustible waste are carbonized in two fluidized carbonization furnaces in the plant, and the coke produced is used in steelworks. The separated garbage and forest-wastes are mixed with dried septic-tank sludge to produce high quality compost for farms. This use of waste materials in the complex plant considerably lowers the amount of waste going to land-fills, and in addition, creates lower total emission of dioxins and carbon dioxide into the environment.

Release of volatile organic compounds during bio-drying of municipal solid waste

Three treatments were tested to investigate the release concentrations of volatile organic compounds （VOCs） during the bio-drying of municipal solid waste （MSW） by the aerobic and combined hydrolytic-aerobic processes.Results showed that VOCs were largely released in the first 4 days of bio-drying and the dominant components were：dimethyl disulfide,dimethyl sulfide,benzene,2-butanone,limonene and methylene chloride.Thus,the combined hydrolytic-aerobic process was suggested for MSW bio-drying due to fewer aeration quantities in this phase when compared with the aerobic process,and the treatment strategies should base on the key properties of these prominent components.Malodorous sulfur compounds and terpenes were mainly released in the early phase of bio-drying,whereas,two peaks of release concentrations appeared for aromatics and ketones during bio-drying.Notably,for the combined hydrolytic-aerobic processes there were also high concentrations of released aromatics in the shift from hydrolytic to aerobic stages.High concentrations of released chlorinateds were observed in the later phase.For the VOCs produced during MSW bio-drying,i.e.,malodorous sulfur compounds,terpenes and chlorinateds,their release concentrations were mainly determined by production rates;for the VOCs presented initially in MSW,such as aromatics,their transfer and transport in MSW mainly determined the release concentrations.

Biodrying of municipal solid waste with high water content by combined hydrolytic-aerobic technology

The high water content of municipal solid waste(MSW)will reduce the effciency of mechanical sorting,consequently unfavorable for beneficial utilization.In this study,a combined hydrolytic-aerobic biodrying technology was introduced to remove water from MSW.The total water removals were proved to depend on the ventilation frequency and the temporal span in the hydrolytic stage. The ventilation frequency of 6 times/d was preferable in the hydrolytic stage.The hydrolytic span should not be prolonged more than ...

Effects of Sulfur Compounds on Cd Partitioning in a Simulated Municipal Solid Waste Incinerator

The effect of sulfur compounds （including sulfur, sulfide, sulfite and sulfate）, initial concentration of heavy metal and operating conditions on Cd emission in municipal solid waste （MSW） incineration were investi-gated using a simulated tubular furnace and simulated MSW spiked with Cd. The concentration of Cd was meas-ured by inductively coupled plasma-atomic emission spectrometry （ICP-AES） after digesting the samples including bottom ash, fly ash and flue gas according to related USEPA methods. The results show that S and Na2S tend to in- crease Cd partitioning in bottom ash, whereas Na2SO3 and Na2SO4 tend to reduce Cd partitioning in bottom ash. The effect of sulfur compounds on Cd partitioning in bottom ash was in the sequence of Na2S〉S〉Na2SO3〉 Na2SO4. chemical equilibrium analysis is also performed to determine the effect of sorbents on Cd adsorption. The calculations show that S presents strong affinity for Cd and restrains Cd adsorption by SiO2, whereas when temperature rises to between 830℃ and 1030℃, Cd adsorption efficiency of SiO2 is over 80% and the efficiency of Al2O3 is up to 85%.

Solidification of Municipal Solid Waste Incineration FlyAsh with Cement and Its Leaching Behaviors of Heavy Metals

The solidifying effect of cement addition on municipal solid waste incineration fly ash (MSWFA for short,collected from the gas exhaust system of MSW incinerator),the interaction of MSWFA with cement and water and the leaching of heavy metals from cement solidified MSWFA are investigated.The main results show that:(1) when MSWFA is mixed with cement and water,H 2 evolution,the formation and volume expansion of AFt will take place,the volume expansion can be reduced by ground rice husk ash addition;(2) heavy metals do leach from cement solidified MSWFA and at lower pH more leaching will occur;(3) compared with cement-solidified fly ash,the leachate of solidified MSWFA is with higher heavy metal contents;(4) with the increment of cement addition leached heavy metals are decreased;and (5) concentrations of Zn,Mn,Cu and Cd in all the leachates can meet the relevant Standards of Japan,but as the regulations for soil and groundwater protection of Japan are concerned,precautions against the leaching of Pb,Cl - and Cr 6+ and so on are needed.

Effect of Moisture on Partitioning of Heavy Metals in Incineration of Municipal Solid Waste

The effect of moisture in municipal solid waste (MSW) on partitioning of lead (Pb), zinc (Zn), copper (Cu) and cadmium (Cd) was studied in a laboratory tubular furnace by using simulated MSW. The moisture in MSW influences heavy metals in following ways, to increase the moisture in flue gas and decrease the combustion temperature, to prolong the combustion time, and to prolong the releasing time of volatiles with the furnace temperature decreased by increasing the moisture. The volatilization of Pb, Zn and Cd was enhanced by increasing the moisture in MSW because of the prolonged combustion time. For Pb and Zn, the combustion time was important at higher temperature, while for Cd, it was important at low temperature. The moisture content showed slight effect on Cu partitioning. When extra chlorine was added to MSW, such as 1%PVC + 0.5%NaCl, the volatilization of Pb, Zn and Cu was enhanced by increasing the moisture because water evaporation reduced the temperature and increased devolatilization time. At higher temperature, NaCl tends to decompose and generates more free chlorine, producing more metal chlorides. Since Cd is a strong volatile heavy metal in MSW, the effect of moisture content on its volatilization is less than that of Pb, Zn or Cu during the MSW incineration.

Chemical speciation and mobility of heavy metals in municipal solid waste incinerator fly ash

Chemical speciation is a significant factor that governs the toxicity and mobility of heavy metals in municipal solid waste incinerator fly ash. Sequential extraction procedure is applied to fractionate heavy metals(Pb, Zn, Cd, Cu, and Cr) into five defined groups: exchangeable, carbonate, Fe-Mn oxide, organic, and residual fractions. The mobility of heavy metals is also investigated with the aid of toxicity characteristic leaching procedure. In the fly ash sample, Pb is primarily presented in the carbonate(51%) and exchangeable(20%) fractions; Cd and Zn mainly exist as the exchangeable(83% and 49% respectively); Cu is mostly contained in the last three fractions(totally 87%); and Cr is mainly contained in the residual fraction(62%). Pb, Zn and Cd showed the high mobility in the investigation, thus might be of risk to the natural environment when municipal solid waste incinerator fly ash is landfilled or reutilized.

Characteristics of gaseous product from municipal solid waste gasification with hot blast furnace slag

Possibility of combustible gas production from municipal solid waste （MSW） using hot blast furnace （BF） slag has been studied.The objective of this work is to generate combustible gas from MSW using heated BF slag.In this experiment,the thermal stability of the MSW was analyzed by thermogravimetric analysis,and effects of temperature,gasifying agent （air,N2,steam） and BF slag on the gas products were investigated at 600？900 ？C.The thermogravimetric analysis indicates that the weight loss of MSW includes four stages：evaporation of the moisture,combustion of volatile materials,burning of carbon residue and burnout of ash.The contents of the combustible gas increase with increasing temperature,and the lower calorific value （LCV） increases rapidly at 600？900 ？C.It is found that volume fraction of CO,H2 and CH4 at different atmospheres increases in the order N2〈air〈steam.It is believed that BF slag acts as the catalyst and the heat carrier,which promotes the gasification reactivity of MSW.

Volatilization of heavy metals during incineration of municipal solid wastes

Incineration experiments with MSW, which had been impregnated with heavy metals, were presented to obtain information on the volatilization behavior of the elements cadmium(Cd), lead(Pb), and zinc(Zn) under different conditions. Experiments were carried out in a bubbling fluid bed system connected to a customized inductively coupled plasma optical emission spectroscopy(ICP-OES) for analyzing metals in the flue gas. The results indicated that the combustion temperature, the gas atmosphere, and the chlorine content in the flue gas could affect the volatilization behavior of heavy metals. In the fluidized bed combustion, a large surface area was provided by the bed sand particles, and they may act as absorbents for the gaseous ash-forming compound. Comparer with the metals Cd and Pb, the vaporization of Zn was low. The formation of stable compounds such as ZnO·Al 2O 3 could greatly decrease the metals volatilization. The presence of chlorine would enhance the volatilization of heavy metals by increasing the formation of metal chlorides. However, when the oxygen content was high, the chlorinating reaction was kinetically hindered, which heavy metals release would be delayed.

Environmental monitoring and fuzzy synthetic evaluation of municipal solid waste transfer stations in Beijing in 2001-2006

Transfer station(TS)is an integral part of present-day municipal solid waste(MSW)management systems.To provide information for the incorporation of waste facilities within the current integrated waste management system,the authors measured the existing environmental quality at five MSW TSs.Discharged wastewater,air,and noise were monitored and assayed at the five TSs in Beijing in 2001-2006 during rainy seasons(RSs)and dry seasons(DSs).Except Ammonia(NH_3)and hydrogen sulfide(H_2S),the analytical results of...

Influence of temperature on performance of anaerobic digestion of municipal solid waste

The influence of temperature on the performance of anaerobic reactors for treating the organic fraction of municipal sohd waste （OFMSW） was studied. Batch digestion of OFMSW was carded out for 32 d at different temperature （25℃, 35℃, 45℃ and 55℃） conditions for total solid concentrations （TS） 17% with the ratio of total organic carbon to nitrogen （C/N） being, 25：1 respectively, while keeping other parameters constant such as inoculum, start-up pH, reactor volume （2 L） and so on. Temperature can influence the methanogenic bacteria activity, accordingly inhibiting the OFMSW biodegradation and stabilization efficiency. Anaerobic reactors excelled at TS reduction, total volatile solid reduction, chemical oxygen demand reduction, increasing cumulative biogas production, whose rate was at temperature （35℃ and 55℃） conditions. Methane concentration in the biogas was above 65% in four reactors. In addition, the fluctuation of temperatures resulted in the biogas production variation. The data obtained indicated that temperature had a significant influence on anaerobic process.

Microstructures and thermal properties of municipal solid waste incineration fly ash

To analyze the feasibility of utilization of thermal technology in fly ash treatment, thermal properties and microstructures of municipal solid waste incineration （MSW1） fly ash were studied by measuring the chemical element composition, specific surface area, pore sizes, functional groups, TEM image, mineralogy and DSC-TG curves of raw and sintered fly ash specimens. The results show that MSWI fly ash particles mostly have irregular shapes and non-typical pore structure, and the supersonic treatment improves the pore structure; MSWI fly ash consists of Such crystals as SiO2, CaSO4 and silica-aluminates, and some soluble salts like KCl and NaCl. During the sintering process, mineralogy changes largely and novel solid solutions are produced gradually with the rise of temperature. Therefore, the utilization of a proper thermal technology not only destructs those persistent organic toxicants but also stabilizes hazardous heavy metals in MSWI fly ash.

Engineering properties for high kitchen waste content municipal solid waste

Engineering properties of municipal solid waste （MSW） depend largely on the waste＇s initial compositionand degree of degradation. MSWs in developing countries usually have a high kitchen waste content（called HKWC MSW）. After comparing and analyzing the laboratory and field test results of physicalcomposition, hydraulic properties, gas generation and gas permeability, and mechanical properties forHKWC MSW and low kitchen waste content MSW （called LKWC MSW）, the following findings wereobtained： （1） HKWC MSW has a higher initial water content （IWC） than LKWC MSW, but the field capacitiesof decomposed HKWC and LKWC MSWs are similar; （2） the hydraulic conductivity and gaspermeability for HKWC MSW are both an order of magnitude smaller than those for LKWC MSW; （3）compared with LKWC MSW, HKWC MSW has a higher landfill gas （LFG） generation rate but a shorterduration and a lower potential capacity; （4） the primary compression feature for decomposed HKWCMSW is similar to that of decomposed LKWC MSW, but the compression induced by degradation ofHKWC MSW is greater than that of LKWC MSW; and （5） the shear strength of HKWC MSW changessignificantly with time and strain. Based on the differences of engineering properties between these twokinds of MSWs, the geo-environmental issues in HKWC MSW landfills were analyzed, including highleachate production, high leachate mounds, low LFG collection efficiency, large settlement and slopestability problem, and corresponding advice for the management and design of HKWC MSW landfills wasrecommended.