A functionalized activated carbon adsorbent prepared from waste amidoxime resin by modifying with H_(3)PO_(4) and ZnCl_(2) and its excellent Cr(Ⅵ)adsorption

With the application of resins in various fields, numerous waste resins that are difficult to treat have been produced. The industrial wastewater containing Cr(Ⅵ) has severely polluted soil and groundwater environments, thereby endangering human health. Therefore, in this paper, a novel functionalized mesoporous adsorbent PPR-Z was synthesized from waste amidoxime resin for adsorbing Cr(Ⅵ). The waste amidoxime resin was first modified with H3PO4 and ZnCl_(2), and subsequently, it was carbonized through slow thermal decomposition. The static adsorption of PPR-Z conforms to the pseudo-second-order kinetic model and Langmuir isotherm, indicating that the Cr(Ⅵ) adsorption by PPR-Z is mostly chemical adsorption and exhibits single-layer adsorption. The saturated adsorption capacity of the adsorbent for Cr(Ⅵ) could reach 255.86 mg/g. The adsorbent could effectively reduce Cr(Ⅵ) to Cr(Ⅲ) and decrease the toxicity of Cr(Ⅵ) during adsorption. PPR-Z exhibited Cr(Ⅵ) selectivity in electroplating wastewater. The main mechanisms involved in the Cr(Ⅵ) adsorption are the chemical reduction of Cr(Ⅵ) into Cr(Ⅲ) and electrostatic and coordination interactions. Preparation of PPR-Z not only solves the problem of waste resin treatment but also effectively controls Cr(Ⅵ) pollution and realizes the concept of “treating waste with waste”.

Analysis of Fourteen Mycotoxins in Chili Peppers in Guizhou Province Combining DES-DLLME and UHPLC-MS/MS and Their Risk Evaluation

Mycotoxins exist widely in food and have a serious impact on human health.At present,most detection methods of mycotoxins are costly and time-consuming.Most of these methods are aimed at detecting a single type of mycotoxin,and the efficiency is not high.On this basis,in this study,QuEChERS-deep eutectic solvent liquid-liquid microextraction was applied to extract and enrich 14 mycotoxins in chili peppers from the concept of green chemistry.A simple,time-consuming and environment-friendly multi-flux pretreatment method was established,and 100 chili pepper samples were randomly sampled from farmers'markets and supermarkets in major urban areas of Guizhou Province for detection,and risk assessment was carried out according to the detection results.

Modeling of the Adsorption Allowing for the Changing Adsorbent Activity at Various Stages of the Process

The goal of this work is,first of all,to construct a mathematical model of the mass transfer process in porous adsorption layers,taking into account the fact that in most cases the adsorption process is carried out in nonstationary technological modes,which requires a clear description of its various stages.The scientific contribution of the novel model is based on a probability approach allowing for deriving a differential equation that takes into account the diffusion migration of adsorbed particles.Solving this equation allows us to calculate the reduced degree of the adsorption surface coverage along the flow and,thereby,calculate the efficiency of the mass transfer process.The model also makes it possible to determine the slip coefficient,the internal diffusion coefficient and the degree of filling of the internal surface of the pores of the adsorbent layer,which corresponds to the completion of the initial stage of adsorption and the transition of the process to a stable mode.In this case,the problem is to calculate a non-isothermal turbulent boundary layer when flowing around the surface of an adsorbent.Next,the problem of identifying the main control parameters of the model has been solved.Based on such analysis and experimental studies to assess the influence of process control parameters,the patterns of adsorption purification and solution separation have been established and the design of a highly efficient adsorption apparatus with a fixed layer of porous adsorbent have been developed.

Effects of Mycotoxin from Maize on Immune Response of Vaccine for Piglets

[Objective] The aim of this study was to investigate the effects of mycotoxin from moldy maize on immune response of piglets.[Method] ELISA method was used to determine the content of Aflatoxin B1 and ochratoxin A in maize; after the piglets were fed with the moldy maize,the corresponding antibody titers in the serums of piglets were measured.[Result] Antibody levels of tested group were obvious lower than that of the control,while the histological section of immune organs also suggested that mycotoxin could significantly inhibit the immune response of piglets.[Conclusion] Mycotoxin in maize had important effects on the internal organs and immune response of piglets.

Synthesis of Li^+ adsorbent(H_2TiO_3) and its adsorption properties

H2TiO3 was obtained from the acid-modified adsorbent precursor Li2TiO3,which was synthesized by a solid-phase reaction between TiO2 and Li2CO3.The extraction ratio of Li＋ from Li2TiO3 was 98.86%,almost with no Ti4＋ extracted.The effects of lithium titanium ratio,calcining temperature and time were investigated on the synthesis of Li2TiO3.Li2TiO3,H2TiO3 and the adsorbed Li＋ adsorbent were characterized by XRD and SEM.The lithium adsorption properties were investigated by the adsorption kinetics and adsorption isotherm.The results indicate that H2TiO3 has an excellent adsorptive capacity for Li＋.Two simplified kinetic models including the pseudo-first-order and pseudo-second-order equations were selected to follow the adsorption processes.The rate constants of adsorption for these kinetic models were calculated.The results show that the adsorption process can be described by the pseudo-second-order equation,and the process is proved to be a chemical adsorption.The adsorption process that H2TiO3 adsorbs Li＋ in LiCl solution well fits the Langmuir equation with monolayer adsorption.

Properties of Advanced Adsorbent for Solid Desiccant Cooling

Characteristics of 13x molecular sieve, silica gel and DH 5 and DH 7 prepared by authors, were investigated for the solid desiccant cooling system. The adsorption isotherms of DH 5 and DH 7 were experimentally determined. The performance parameters of adsorption capacity, air humidity, regeneration temperature and cooling volume were tested and discussed in detail. The results show that the properties of new adsorbents DH 5 and DH 7 on desiccant cooling are much better than those of common desiccants. The maximum adsorption volumes of water on DH 5 and DH 7 are 0.72?kg/kg and 0.73 ?kg/kg, respectively. The desiccant cooling volumes of DH 7and DH 5 are 2.2 and 1.3 times larger than those of silica gel and 13x(molecular sieve), respectively, after regeneration at 100?℃. The cooling volume per mass unit of DH 5 is 1.9 times larger that of 13x.

Mycotoxin’s Infections and Prevention Methods: State of the Art

Fungi that attack field crops and contaminate agricultural commodities produce mycotoxins when conditions are favorable. These are specialized metabolites made of poisonous chemical compounds created by bacteria, fungi, or plants that aren’t involved in the organism’s usual growth, development, or reproduction. They have an adversarial hold on humans, wildlife, and the agricultural sector, resulting in mysterious ailments and economic disruptions. Mycotoxins-tainted food and fodder can be found all over the world, posing a global concern. Consumption of contaminated food and fodder is a typical cause of epidemic outbreaks. Other mycotoxins have been associated with esophageal cancer and neural tube defects (NTDs);the immunotoxin deoxynivalenol (DON) causes diarrhea when combined with trichothecenes, and ochratoxin A (OTA) has been linked to kidney failure. The direct market costs associated with missed trade or lower revenues owing to tainted food or feed could be viewed as the economic repercussions of mycotoxins on human society. This review describes frequent groups of mycotoxins in detail, their impact on global health, their impact on the socio-economy;the methods of detection and prevention of these mycotoxins.

Adsorption/desorption behavior between a novel amphoteric granular lignin adsorbent and reactive red K-3B in aqueous solutions

A novel amphoteric granular lignin adsorbent(AGLA) was prepared using magnesium lignosulfonate as a raw material which was provided by a straw sulfite pulp mill in Guangdong Province, China. A reactive dye(red K-3B) was used as an adsorbate to investigate the adsorption behavior by static and mobile ways. The removal of reactive red K-3B was found to be initially pH and concentration dependent. Moreover, an increase of solution temperature ranging from 5℃ to 60℃ helped to enhance the rate of intraparticle diffusion of adsorbate and changes in the size of the pores of the adsorbent and thus to reduce the adsorption time. The total breakthrough adsorption capacity was 531 mg/g, and the saturated adsorption capacity was 560 mg/g, which prevailed over the activated carbons evidently. The reactive red K-3B adsorbed on AGLA could be recovered with a mixture of alcohol, NaCl and HCl aqueous solutions. The recovery percentage could reach 92.4%.

Alleviation of mycotoxin biodegradation agent on zearalenone and deoxynivalenol toxicosis in immature gilts

Background: The current study was carried out to evaluate the effects of mycotoxin biodegradation agent(MBA, composed of Bacillus subtilis ANSB01 G and Devosia sp. ANSB714) on relieving zearalenone(ZEA) and deoxynivalenol(DON) toxicosis in immature gilts.Methods: A total of forty pre-pubertal female gilts(61.42 ± 1.18 kg) were randomly allocated to four diet treatments: CO(positive control); MO(negative control, ZEA 596.86 μg/kg feed and DON 796 μg/kg feed);COA(CO + 2 g MBA/kg feed); MOA(MO + 2 g MBA/kg feed). Each treatment contained 10 replicates with 1 gilt per replicate. Gilts were housed in an environmentally controlled room with the partially slatted floor.Results: During the entire experimental period of 28 d, average daily gain(ADG) and average daily feed intake(ADFI)of gilts in MO group was significantly reduced compared with those in CO group. The vulva size of gilts was significantly higher in MO group than CO group. In addition, significant increases in the plasma levels of Ig A,Ig G, IL-8, IL-10 and PRL were determined in MO group compared with that in CO group. ZEA and DON in the diet upregulated apoptotic caspase-3 in ovaries and uteri, along with down-regulated the anti-apoptotic protein Bcl-2 in ovaries. The supplementation of MBA into diets co-contaminated with ZEA and DON significantly increased ADG, decreased the vulva sizes, reduced the levels of Ig G, IL-8 and PRL in plasma, and regulated apoptosis in ovaries and uteri of gilts.Conclusions: The present results indicated that feeding diet contaminated with ZEA and DON simultaneously(596.86 μg/kg + 796 μg/kg) had detrimental effects on growth performance, plasma immune function and reproductive status of gilts. And MBA could reduce the negative impacts of these two toxins, believed as a promising feed additive for mitigating toxicosis of ZEA and DON at low levels in gilts.

Mycotoxin detection——Recent trends at global level

Mycotoxin contamination in agro-food systems has been a serious concern globally during the last few decades. Mycotoxins are toxic secondary metabolites produced by fungi when they grow in agro-food products and feedstuff. Several detection techniques have been developed in recent years to detect mycotoxins in the food and feed effectively. HPLC based tech- niques are very common in usage in the laboratories for the testing of mycotoxins. In recent years, immuno-based assays is widely used and have been reported at large due to its sensitivity and limited detection time. Immuno assay-based kits were developed effectively to be used in the fields and in storage systems to detect the mycotoxin levels. Microarray-based immunoassays developed in the recent years could simultaneously detect afiatoxin, ochratoxin, and zearalenone with the higher sensitivity. Aptamer-based assays could target the detection of ochratoxin and aflatoxins and fumonisins at high specificity in food products. In recent years, several assays reported for the simultaneous multiple detection of different mycotoxin was based on HPLC and LC-MS/MS. There is a need for the use of these advanced technologies in the com- mercial scale.

Effect of pyrolysis temperature and hold time on the characteristic parameters of adsorbent derived from sewage sludge

According to the Doehlert's matrix method, the adsorbent derived from sewage sludge was prepared through chemical activation under controlling the pyrolysis temperature and hold time. The characteristic parameters including the total yield, adsorption of methylene blue, adsorption of iodine, BET surface area, micro-pore volume are 35%—49%, 16.5—38 mg/g, 285—362 mg/g, 185—359 m2/g, and 0.112—0.224 m3/g, respectively. According to the experimental data, the multi-linear regression method was adopted to fit the relations between the characteristic parameters and influential factors. At final, through optimization method, the optimal adsorbent is obtained when using 62 min as hold time and 1105K as pyrolysis temperature. Under the conditions, the adsorbent was produced and compared the characteristic parameters with model forecast value, the coherence is satisfied.

Morphological and molecular response of small intestine to lactulose and hydrogen-rich water in female piglets fed Fusarium mycotoxins contaminated diet

Background: Following the intake of Fusarium mycotoxin-contaminated feed,small intestines may be exposed to high levels of toxic substances that can potentially damage intestinal functions in livestock.It is well known that Fusarium mycotoxins will lead a breakdown of the normally impeccable epithelial barrier,resulting in the development of a "leaky" gut.H2 administration with different methods has been proved definitely potentials to prevent serious intestinal diseases.The goal of this study is to investigate the roles of lactulose(LAC) and hydrogenrich water(HRW) in preventing intestinal dysfunction in piglets fed Fusarium mycotoxin-contaminated feed.Methods: A total of 24 female piglets were evenly assigned to 4 groups: negative control(NC) group,mycotoxincontaminated(MC) feed group,MC feed with LAC treatment(MC + LAC),and MC feed with HRW treatment(MC +HRW),respectively.Piglets in the NC group were fed uncontaminated control diet,while remaining piglets were fed Fusarium mycotoxin-contaminated diet.For the NC and MC groups,10 mL/kg body weight(BW) of hydrogen-free water(HFW) was orally administrated to piglets twice daily;while in the MC + LAC and MC + HRW groups,piglets were treated with the same dose of LAC solution(500 mg/kg BW) and HRW twice daily,respectively.On d 25,serum was collected and used for biochemical analysis.Intestinal tissues were sampled for morphological examination as well as relative genes and protein expression analysis.Results: Our data showed that Fusarium mycotoxins induced higher serum diamine oxidase(DAO) activities(P < 0.05),D-lactic acid levels(P < 0.01),and endotoxin status(P < 0.01),lower villus height(P < 0.01) and ratio of villus height to crypt depth(P < 0.05) in small intestine,greater apoptosis index and higher mRNA expression related to tight junctions(P < 0.05).In addition,the distribution and down-regulation of claudin-3(CLDN3) protein in the small intestinal was also observed.As expected,oral administrations of HRW and LAC were found to remarkably provide beneficial effects against Fusarium mycotoxin-induced apoptosis and intestinal leaking.Moreover,either HRW or LAC treatments were also revealed to prevent abnormal intestinal morphological changes,disintegrate tight junctions,and restore the expression and distribution of CLDN3 protein in the small intestinal mucosal layer in female piglets that were fed Fusarium mycotoxins contaminated diet.Conclusions: Our data suggest that orally administrations of HRW and LAC result in less Fusarium mycotoxininduced apoptosis and leak in the small intestine.Either HRW or LAC treatments could prevent the abnormal changes of intestinal morphology and molecular response of tight junctions as well as restore the distribution and expression of CLDN3 protein of small intestinal mucosa layer in female piglets that were fed Fusarium mycotoxins contaminated diet.

PREVENTIVE DETECTION OF FUNGI AND MYCOTOXINS IN CORN FROM HIGH RISKAREA OF ESOPHAGEAL CANCER IN CIXIAN COUNTY

Fungal and mycotoxin contamination in the corn flour used by the local residents in the high incidence area of esophageal cancer as main foodstuff was analysed with classical fungal culture and high performance liquid chromatography methods from 1990 to 1991.The results showed that fungal contamination in the corn was quite severe in all the samples from the four villages with different geographic features.Sterigmatocystin,Deoxynivalenol, Aflatoxin B1, B1 and G1 contamination were found.

Multi-mycotoxin exposure and risk assessments for Chinese consumption of nuts and dried fruits

In this study, 15 mycotoxins were detected in 233 nut and dried fruit samples from China. The 15 mycotoxins included aflatoxins （AFs： AFB1, AFB2, AFG1 and AFG2）, trichothecene toxins （TCs： T-2, ZEA, ENA, ENA1, ENB, ENB1 and BEA）, Alternaria toxins （ATs： TEN, AOH and AME） and ochratoxin A （OTA）. The mycotoxins were detected in 47.6% of the samples and all 15 of the mycotoxins were found. Two samples were positive for AFB1 and exceeded the maximum tolerable levels allowed in China. The contamination levels of the mycotoxins found in nuts, dried jujubes, raisins, dried figs and dried Iongans were in the ranges of 0.1-462.7, 0.2-247.3, 0.8-10.1,0.2-384.1 and 0.1-89.2 μg kg^-1, respectively. Dried figs （80.0%） had the highest incidence of mycotoxins, followed by dried Iongans （60.0%）, dried jujubes （57.1%）, nuts （43.6%） and raisins （26.7%）. The estimated daily intake （EDI） values of each individual mycotoxin and all of the mycotoxins collectively were calculated by both the deterministic approach （DA） and the probability approach （PA）. For risk characterization, dietary exposure to TCs, ATs and OTA through consumption of nuts and dried fruits according to both approaches, showed no health risk to Chinese adults by exposure to either individual mycotoxins or in combination. To the best of our knowledge, this is the first work in which risk assessment of multimycotoxins is performed, specifically including the emerging ENNs and BEA, in nuts and dried fruits of China.

Hexagonal boron nitride adsorbent: Synthesis, performance tailoring and applications

Hexagonal boron nitride(h-BN),with unique structural and properties,has shown enormous potentitoward variety of possible applications.By virtue of partially-ionic character of BN chemical bonds anusually large specific surface area,h-BN-related nanostructures exhibit appealing adsorption propertiewhich can be widely applied for separation and purification towards energy and environment treatmenIn this review,recent progress in designing h-BN micro,nano-structure,controlled synthesis,performancoptimizing as well as energy and environment-related adsorption applications are summarized.Strategieto tailor the h-BN can be classified as morphology control,element doping,defect control and surfacmodification,focusing on how to optimize the adsorption performance.In order to insight the intrinsimechanism of tuning strategies for property optimization,the significant adsorption applications of h-Btowards hydrogen storage,CO2 capture,pollutants removal from water and adsorption desulfurization arpresented.

RhB Adsorption Performance of Magnetic Adsorbent Fe_3O_4/RGO Composite and Its Regeneration through A Fenton-like Reaction

Adsorption is one of the most effective technologies in the treatment of colored matter containing wastewater. Graphene related composites display potential to be an effective adsorbent. However, the adsorption mechanism and their regeneration approach are still demanding more efforts. An effective magnetically separable absorbent, Fe3O4 and reduced graphene oxide(RGO) composite has been prepared by an in situ coprecipitation and reduction method. According to the characterizations of TEM, XRD, XPS, Raman spectra and BET analyses, Fe3O4 nanoparticles in sizes of 10-20 nm are well dispersed over the RGO nanosheets, resulting in a highest specific area of 296.2 m2/g. The rhodamine B adsorption mechanism on the composites was investigated by the adsorption kinetics and isotherms. The isotherms are fitting better by Langmuir model, and the adsorption kinetic rates depend much on the chemical components of RGO. Compared to active carbon, the composite shows 3.7 times higher adsorption capacity and thirty times faster adsorption rates. Furthermore,with Fe3O4 nanoparticles as the in situ catalysts, the adsorption performance of composites can be restored by carrying out a Fenton-like reaction, which could be a promising regeneration way for the adsorbents in the organic pollutant removal of wastewater.

Recent developments and consideration issues in solid adsorbents for CO_2 capture from flue gas

The increase in energy demand caused by industrialization leads to abundant CO_2 emissions into atmosphere and induces abrupt rise in earth temperature. It is vital to acquire relatively simple and cost-effective technologies to separate CO_2 from the flue gas and reduce its environmental impact. Solid adsorption is now considered an economic and least interfering way to capture CO_2, in that it can accomplish the goal of small energy penalty and few modifications to power plants. In this regard, we attempt to review the CO_2 adsorption performances of several types of solid adsorbents, including zeolites, clays, activated carbons, alkali metal oxides and carbonates, silica materials, metal–organic frameworks, covalent organic frameworks, and polymerized high internal phase emulsions. These solid adsorbents have been assessed in their CO_2 adsorption capacities along with other important parameters including adsorption kinetics, effect of water, recycling stability and regenerability. In particular,the superior properties of adsorbents enhanced by impregnating or grafting amine groups have been discussed for developing applicable candidates for industrial CO_2 capture.

Organobentonites as adsorbents for some organic pollutants and its application in wastewater treatment

Two organobentonites were synthesized by placing quaternary ammonium cationscetyltrimethylammonium bromide (CTMAB) and cetylpyridinium chloride (CPC) on bentonite bycation exchange. Their ability to adsorb phenol, aniline. nitrobenzene and p-nitrophenol were examined.The optimal conditions for organobentonites to remove the organic pollutants from waterwere studied. The removal rates for organobentonites to treat the organic compounds in water werefound to be over 8 times for the original mineral (untreated bentonite).The removal rates of organic pollutants and COD of wastewater were further improved by organobentonites in the presence of aluminum sulfate. The structure of organobentonites and the mechanism for their adsorption were investigated by X-ray diffraction (XRD) analysis, infrared spectra and BET surface area.

Synthesis and characterization of porous 4VP-based adsorbent for Re adsorption as analogue to 99Tc

Technetium(^(99)Tc), a major fission product in nuclear reactors, of high yield, long-half-life and high mobility in the environment must be removed in nuclear fuel reprocessing. Considering rhenium(Re) and Tc are both VIIB elements, Re is a good chemical analogue to ^(99)Tc. Herein, we use Re as a substitution of ^(99)Tc to study adsorption and desorption behavior. Porous 4-vinylpyridine–divinylbenzene-based(4VP–DVB) adsorbent containing tertiary amine groups is synthesized by suspension polymerization and characterized by BET, TGA, SEM and laser particle size analyzer. The adsorbent has high adsorption efficiency toward Re(VII) in 0.1 mol/L nitric acid solution, and the adsorption equilibrium can be achieved in 30 min. The adsorption kinetics of Re(VII)follows pseudo-second-order rate equation, the adsorption isotherm matches well with the Langmuir isotherm, and the adsorption capacity of Re(VII) on 4VP–DVB adsorbent is 352.1 mg/g at 298 K. Thermodynamic study reveals that the adsorption process is exothermic. This adsorbent is of separation convenience when a fixed-bed column is used,compared to the batch adsorption treatment.

Dye removal from wastewater using the adsorbent developed from sewage sludge

Sewage sludge was used to develop an effective carbon adsorbent. This adsorbent was employed for the removal of azo dye such as Direct Dark Brown M and Acid Mordant Brown RH. The adsorption of dyes on this adsorbent was studied as a function of contact time, concentration, pH and temperature by batch method. The equilibrium adsorption capacity of a carbonaceous adsorbent prepared from city wastewater treatment plant was 502, and 329.7 mg/g of Direct Dark Brown M and Acid Mordant Brown RH, respectively. The experimental data were analyzed by the Langmuir and Freundlich models of adsorption. Equilibrium data fitted well with the Langmuir model. The rates of adsorption were found to conform to the Lagergren second-order kinetics with good correlation. The equilibrium adsorption capacity of the carbonaceous adsorbents was determined with the Langmuir equation as well as the Lagergren second-order rate equation. The most ideal pH for adsorption of two dyes onto adsorbents was found to be 3 and below. The results indicate that the carbonaceous adsorbents could be employed as a low cost adsorbent in the removal of dyes from wastewater.